cats and dogs QuiltSze: 40” x 55”| Design by: Marinda Stewart | Level: CONFIDENT BEGINNER
Free Pattern available on michaelmillerfabrics.com
p. 212.704.0774 | f. 212.633.0272 | [email protected] | www.michaelmillerfabrics.com
CX6929 LimeHigh Society
Fat 1/8
CX4768 LimeadeLunch Box3/8 yard
CX7615 AquaLil’ Doggie3/8 yard
CX0482 WhiteClown Check
1/2 yard
CX6929 AquaHigh Society
Fat 1/8
CX7256 CoralTiny Stitches
Fat 1/8
CX7615 ClementineLil’ Doggie
Fat 1/4
SC5333 CoralCotton Couture
Fat 1/8
CX6929 ClementineHigh Society
3/8 yard
CX1065 DalmatianGarden Pindot
Fat 1/8
CX5456 BlackPaw Prints3/8 yard
SC5333 CaribbeanCotton Couture
Fat 1/8
CX7615 LimeLil’ Doggie
Fat 1/8 & 2 7/8 backing
CX5514 EbonyPinhead3/8 yard
CX4768 AquaLunch Box
Fat 1/8
SC5333 KryptoniteCotton Couture
Fat 1/8
12 Kits 24 KitsCX6929 Lime 1 1/2 yards (1 bolt) 3 yards (1 bolt)CX6929 Aqua 1 1/2 yards (1 bolt) 3 yards (1 bolt)
CX6929 Clementine 4 1/2 yards (1 bolt) 9 yards (1 bolt)CX7615 Lime 1 1/2 yards (1 bolt) 3 yards (1 bolt)CX7615 Aqua 4 1/2 yards (1 bolt) 9 yards (1 bolt)
CX7615 Clementine 3 yards (1 bolt) 6 yards (1 bolt)CX5456 Black 4 1/2 yards (1 bolt) 9 yards (1 bolt)
CX4768 Aqua 1 1/2 yards (1 bolt) 3 yards (1 bolt)CX4768 Limeade 4 1/2 yards (1 bolt) 9 yards (1 bolt)
CX7256 Coral 1 1/2 yards (1 bolt) 3 yards (1 bolt)CX1065 Dalmatian 1 1/2 yards (1 bolt) 3 yards (1 bolt)
CX5514 Ebony 4 1/2 yards (1 bolt) 9 yards (1 bolt)CX0482 White 6 yards (1 bolt) 12 yards (1 bolt)SC5333 Coral 1 1/2 yards (1 bolt) 3 yards (1 bolt)
SC5333 Caribbean 1 1/2 yards (1 bolt) 3 yards (1 bolt)SC5333 Kryptonite 1 1/2 yards (1 bolt) 3 yards (1 bolt)
CX7615 Lime (Backing) 34 1/2 yards (3 bolts) 69 yards (5 bolts)
FABRIC REQUIREMENTS
Cats and Dogs
Quilt designed by Marinda Stewart
Size: 40” W x 55” H
Skill Level: Confident Beginner
Note: This quilt is constructed using (8) vertical rows
Fabrics Yardage Cutting
CX6929 Lime
High Society
Fat 1/8* (2) 5 ½” square
(4) 3 ½” square
CX6929 Aqua
High Society
Fat 1/8* (2) 5 ½” square
(6) 3 ½” square
CX6929 Clementine
High Society
3/8 yard (2) 5 ½” square
(6) 3 ½” square
(2) 1 ¾” W x 10 ½” H **
CX7615 Lime
Lil’ Doggie
Fat 1/8* (2) 6” square
(2) 5 ½” square
CX7615 Aqua
Lil’ Doggie
3/8 yard (2) 6” square
(2) 5 ½” square
(2) 1 ¾” W x 10 ½” H **
CX5456 Black
Paw Prints
3/8 yard (5) 2 ½” x W.O.F. – binding
CX4768 Aqua
Lunch Box
Fat 1/8* (2) 5 ½” square
(6) 3 ½” square
CX4768 Limeade
Lunch Box
3/8 yard (1) 5 ½” square
(4) 3 ½” square
(12) 1 ¾” x 10 ½”
CX7256 Coral
Tiny Stiches
Fat 1/8* (2) 5 ½” square
(6) 3 ½” square
CX1065 Dalmatian
Garden Pindot
Fat 1/8* (4) 5 ½” square
CX5514 Ebony
Pinhead
3/8 yard (4) 5 ½” square
(12) 1 ¾” x10 ½”
CX0482 White
Clown Check
½ yard (9) 5 ½” x 10 ½”
SC5333 Coral
Cotton Couture
Fat 1/8* (2) 6” square
(3) 3 ¼” circles ***
SC5333 Caribbean
Cotton Couture
Fat 1/8* (2) 6” square
(3) 3 ¼” circles ***
SC5333 Kryptonite
Cotton Couture
Fat 1/8* (2) 6” square
(3) 3 ¼” circles ***
CX7615 Lime
Lil’ Doggie
2 7/8 yards Backing – see directions – one-
way print
CX7615 Clementine
Lil’ Doggie
Fat 1/4 (2) 6” square
(2) 5 ½” square
* A piece of fabric 9” x 22”
** Cut vertically – one-way print
*** See pattern
Also Needed: 48” x 65” batting, threads to match, scissors, straight pins, rotary cutter, acrylic ruler,
mat, and fusible web.
Directions:
1. Sew together (1) each 1 ¾” x 10 ½” pieces of CX4768 Limeade, CX7615 Aqua, CX6929
Clementine, CX5514 in order left to right. Keep motifs upright. Make (12) 5 ½” x 10 ½” units
total. Set aside.
2. For large pinwheel block units – place one CX7615 Lime 6” square right sides together
on top of one SC5333 Kryptonite 6” square. Draw a diagonal line from corner to corner. Sew ¼”
on each side of the drawn line. Cut apart on the drawn line. Press. Trim each half square
triangle unit to an accurate 5 ½” square. Repeat with the remaining CX7615 Lime and SC5333
Kryptonite 6” squares. Make (4) total. Repeat using CX7615 Aqua and SC5333 Caribbean 6”
squares and CX7615 Clementine and SC5333 Coral 6” squares. Set all aside.
3. For small pinwheel blocks (5 ½” square) repeat the process in Step #2 using CX4768
Aqua 2 ½” squares and CX6929 Aqua 3 ½” squares. Trim each half square triangle to an
accurate 3” square. Sew (4) half square triangles together, as shown, to make (1) 5 ½” square
pinwheel. Make (3) pinwheel blocks total. Repeat using CX7256 3 ½” squares and CX6929
Clementine. Make (3) 5 ½” blocks. Repeat using CX4768 Limeade and CX6929 Lime. Make (2) 5
½” blocks total. Set all blocks aside.
4. Trace (9) 3 ¼” circles onto the paper side of the fusible web. Rough cut out. Iron (3) each
on SC5333 Coral, Caribbean, and Kryptonite. Cut out. Remove paper backing, Iron one circle
onto the right side of one CX0482 5 ½” x 10 ½” piece as shown. Using matching thread, hand or
machine stitch around the raw edges of the circle. Machine satin stitching was used in this quilt.
Make (3) each of Caribbean, Coral, and Kryptonite. Set aside.
5. To assemble quilt by row from top to bottom:
Row #1 – Start with a Lime 5 ½” half square triangle, add another Lime 5 ½” half square triangle
as shown. Refer to photo. Next, add a CX4768 Aqua 5 ½” square, followed by a CX5514 5 ½”
square. Add a 5 ½” x 10 ½” stripe unit, followed a CX7256 5 ½” square and end with a 5 ½” x 10
½” stripe unit. Keep motifs upright.
Row #2 – Sew the remaining (2) Lime 5 ½” half square triangles together as shown. Add a
striped unit, a 5 ½” Coral pinwheel, a 5 ½” x 10 ½” Coral circle unit, CX7615 Aqua 5 ½” square,
CX1065 5 ½” square, and a Lime circle unit. Sew row to right side of Row #1.
Row #3 – CX7256 5 ½” square, Aqua circle piece, CX6929 Aqua 5 ½” square, CX1068 5 ½”
square, CX7615 Clementine 5 ½” square, stripe unit, Aqua 5 ½” half square triangle. Refer to
photo for placement. End with a CX6929 Clementine 5 ½” square. Join to quilt.
Row #4 – Begin with a stripe unit followed by a CX7615 Clementine 5 ½” square. Add another
stripe unit followed with an Aqua 5 ½” pinwheel. Add an Aqua circle block. Follow with (2) Aqua
half square triangles to complete the large pinwheel as shown. End with a CX5514 5 ½” square.
Join to quilt, matching seams as needed.
Row #5 – Sew an Aqua pinwheel to the bottom of a CX7615 Lime 5 ½” square. Add a Lime circle
block followed by a CX4768 Limeade 5 ½” square. Add a stripe unit, followed by a CX5514 5 ½”
square and a CX6929 Lime 5 ½” square. End with a stripe unit. Join to the quilt.
Row #6 – Sew a CX4768 Aqua 5 ½” square to the bottom of a stripe unit. Add (2) Coral 5 ½” half
square triangles as shown, followed by a CX6929 Lime 5 ½” square and a CX1065 5 ½” square.
Add a Coral 5 ½” pinwheel, a Coral circle block, and end with a CX6929 Aqua 5 ½” square. Join
to the quilt.
Row #7 – Sew a stripe unit to the bottom of a CX6939 Coral 5 ½” square. Follow with (2) Coral 5
½” half square triangle units. Refer to photo for placement. Add a Lime circle block. Follow with
a stripe unit, a Coral 5 ½” pinwheel, and a CX5514 5 ½” square. Join to quilt.
Row #8 – Sew a CX7615 Aqua 5 ½” square to the bottom of a Lime pinwheel. Follow with an
Aqua circle block, a stripe unit, and Aqua pinwheel, a CX7615 Lime 5 ½” Square, CX1065 5 ½”
square, and a stripe unit. Join to quilt.
6. For backing, from CX7615 Lime – cut (1) W.O.F. x 66” piece. Remove selvage edges.
From the remaining yardage cut (2) 6” wide pieces vertically. Sew together across the 6” edge.
Keep motifs upright. Sew pieced strip to one side of the 66” piece. Trim off excess to make
approximately 50” x 66” piece.
7. Layer backing, batting, and quilt top. Baste.
8. Quilt as desired.
9. Bind quilt using CX5456 2 ½” wide strips, pieced as needed for length.
Kit Info
(12) Kits (24) Kits
CX6929 Lime 1 ½ yards (1) bolt 3 yards (1) bolt
CX6929 Aqua 1 ½ yards (1) bolt 3 yards (1) bolt
CX6929 Clementine 4 ½ yards (1) bolt 9 yards (1) bolt
** CX7615 Lime 1 ½ yards (1) bolt 3 yards (1) bolt
CX7615 Aqua 4 ½ yards (1) bolt 9 yards (1) bolt
CX7615 Clementine 3 yards (1) bolt 6 yards (1) bolt
CX5456 Black 4 ½ yards (1) bolt 9 yards (1) bolt
CX4768 Aqua 1 ½ yards (1) bolt 3 yards (1) bolt
CX4768 Limeade 4 ½ yards (1) bolt 9 yards (1) bolt
CX7256 Coral 1 ½ yards (1) bolt 3 yards (1) bolt
CX1065 Dalmatian 1 ½ yards (1) bolt 3 yards (1) bolt
CX5514 Ebony 4 ½ yards (1) bolt 9 yards (1) bolt
CX0482 White 6 yards (1) bolt 12 yards (1) bolt
SC5333 Coral 1 ½ yards (1) bolt 3 yards (1) bolt
SC5333 Kryptonite 1 ½ yards (1) bolt 3 yards (1) bolt
SC5333 Caribbean 1 ½ yards (1) bolt 3 yards (1) bolt
Backing: CX7615 Lime 10 ½ yards (1) bolt ** 21 yards (2) bolts **
** Includes amount for piecework listed above