+ All Categories
Transcript
Page 1: Central Motors - Unbrako pricelist

INR PRICE LIST

No. DFL/07th Effective 15 May, 2012.

Page 2: Central Motors - Unbrako pricelist

All information contained in this catalogue has been prepared to assist users in their requirements for Fasteners. The

information is based on International Fastener Standards. All such source material and information beyond the control

of Deepak fastener Ltd (DFL) is subject to change.

Whilst every care has been taken to ensure that all information and technical data is accurate, DFL will not be liable to

any customer that relies on any matter, fact or representation nor will it be liable for any subsequent damage or loss

resulting from the use of any information contained in this catalogue. Customers are advised to make their own enquiries

or seek independent advice regarding the fitness and suitability of the products listed.

Deepak Fasteners Ltd. has the right to change the price, specifications and other particulars contained in this pricelist,

without any prior notice. The products listed in this catalogue might not be stocked at DFL at all times and customers are

advised to enquire the availability of the same. E. & O.E.

.

.

.

Deepak Fasteners through its Unbrako Division warrants that these products conform to industry standards

specified herein and will be free from defects in materials and workmanship. This warranty is expressly given in lieu of any

and all other express or implied warranties, including any implied warranty of merchantability or fitness for a particular

purpose, and in lieu of any other obligation on our part of DFL will at its option, repair or replace free of charge (excluding

all shipping and handling costs) any products which have not been subject to misuse, abuse, or modification and which in its

sole determination were not manufactured in compliance with the warranty given above.

The remedy provided herein shall be the exclusive remedy for any breach of warranty or any claim arising in any

way out of the manufacture, sale or use of these products. In no event shall Deepak Fasteners be liable for consequential,

incidental or any other damages of any nature whatsoever except those specifically provided herein for any breach of warranty

or any claim arising in any way of the manufacture, sale or use of these products. No other person is authorised by Deepak

Fasteners to give any other warranty, written or oral, pertaining to the products.

.

Disclaimer

Limited Warranty And Exclusive Remedy

Surface Finish : All the products, unless otherwise order, are supplied in black thermal finish with a coat of rust preventive oil.

Packing : All products are supplied in standard packing as described in respective price tables. For sizes M6 (1/4) and

above – 3% extra packing charges will be applicable if the order quantity is less than one carton.

Plating : No guarantee can be given for Unbrako products which are plated by users or by outside plates, who may not

have considered hydrogen embrittlement problem.

Note

The Price, specifications and other particulars contained in this pricelist are subject to change with notice.

Page 3: Central Motors - Unbrako pricelist

Unbrako

Contents Pages

Product Range - Quick Selector Guide

Thread Size Comparison

Socket Head Cap Screws (Metric)

Socket Head Cap Screws (Inch-BSW)

Socket Countersunk Head Screw (CSK)

Shoulder Bolt

Socket Set Screws (Metric)

Socket Set Screws (Inch)

Button Head Screws ISO (Metric)

Flange Button Head Screws ISO (Metric)

®Durlok Bolt

®Durlok Nut

®Durlok Washer

Hex Head Bolts / Screws (Metric)

Hex Head Bolts / Screws (Inch-UNC)

High Strength Structural Bolt

Stud Bolt with 2 Heavy Hex Nut (Metric) ASTM A193-B7 & A194-2H

Stud Bolt with 2 Heavy Hex Nut (Inch) ASTM A193-B7 & A194-2H

Heavy Hex Nut (Metric & Inches) ASTM A194

Hex Nut (Metric)

Hex Nut (Inch)

Nylock Nut (Metric)

Spring Washer (Metric) Square & Flat Section

Hardened Washer

Auto Torque Indicator (ATI Washers)

Weld Nut

Hexagon Wrenches Sets

Dowel Pins (Metric)

High Tensile Track Shoe Bolt & Square Nuts

Drop in Anchor

Comparison of different strength grades

How to identify UNBRAKO products

01

02

03 - 07

08 - 10

11 - 12

13

14 - 15

16

17

18

19

20

20

21 - 25

26 - 29

30 - 31

32 - 34

35 - 37

38

39

40

40 - 41

42

42

43

43

44

45 - 46

47 - 48

49

50

51

Page 4: Central Motors - Unbrako pricelist

Unbrako is a single source, full service provider of engineered, high strength precision fasteners for

industrial, infrastructure, petrochemical, automotive and other custom designed applications where Quality,

Performance and Reliability make the difference. Unbrako products are primarily used in performance

critical applications and incorporate unique design and workmanship features that enable them to

withstand high fatigue loads and cycles over prolonged periods. Unbrako's manufacturing and

engineering facilities operate around the clock to cater for the needs of its customers.

Unbrako

A Ubout s

Page 5: Central Motors - Unbrako pricelist

Unbrako is committed to total customer satisfaction. This is

achieved through continuous improvement in every operational

aspect, via Unbrako Quality Assurance system that aims at Zero

defect manufacture and supply. Unbrako's True goal is to provide

the best solution at optimal cost, every time and on time.

Commitment To Excellence

Unbrako

DFL Global Strength

Since 1911, Unbrako has been a leader in advancing the technology of bolted joints

and meeting the needs of industry for stronger and better performing fasteners. Products ® ®such as the famous Unbrako socket head cap screw and Durlok fasteners are the

solutions of choice for engineering applications across the world. Today, Deepak Fasteners

(DFL) along with its Unbrako division operates in over 35 countries across 4 continents and

supplies the automotive, aerospace, engineering and construction industries with

advanced products and sophisticated fastening solutions.

Page 6: Central Motors - Unbrako pricelist

Capabilities

With advanced manufacturing, engineering and logistics facilities such as modern cold heading

and thread rolling, state-of-the-art heat treatment plant and a sophisticated sourcing and logistics

network, Unbrako provides a full-service package, designed to suit customer needs. Unbrako is

equipped and prepared to provide technical support through the entire design, development and

manufacturing/supply cycle. Unbrako's focus is on building long term relationships with its

customers and raw material or part supply partners, ensuring better understanding of customer

needs and resulting in superior customer satisfaction.

Utilizing the international network of DFL and allied companies and focusing on the long term

relationships, Unbrako, with ISO/TS accreditation, provides a full range of offerings including

sourcing and procurement of complete range of industrial fastening hardware (bolts, screws, SEM's,

nuts, studbolts, self locking fasteners, thread forming fasteners etc.) and full-service supply of complete

hardware packages to a plant or production line. Full-service supply includes engineering and design

support, procurement and purchasing services, localized warehousing and transport, a variety of

packaging options and choice of delivery frequencies - they are all available to provide the right

answer to any customer need.

Supply Chain

Page 7: Central Motors - Unbrako pricelist

UnbrakoOur Commitment To Quality

ISO 9001:2008 CE CERTIFIED: 14399 & 15048

DELTA DORKEN APPROVAL WRC PT/285/0609

ISO / TS 16949:2002

SELLIHCA ID. 108198

Page 8: Central Motors - Unbrako pricelist

1

Quick Production Selection Guide

Socket Head

Cap Screws

Socket

Countersunk

Head Screws

Socket Button

Head Cap Screws

2N/mm

190000 1,300

(12.9)M2 to M42

1/8

to 1”

160000

--

Hardness

HRc 45

Min.

Hardness

HRc 47 Min.

800/830

(8.8)

1,040

(10.9)

Grade

R,S

V

Nut

Grade

8/10

Bolts

8.8/10.9

Nuts

8/10

--

Stud B7

Nut 2H

--

800/830

(8.8)

1,040

(10.9)

M3 to M42

M12-M56

M16 to M30

M6 to M72

Nut

Grade 8/5

M4 to M42

1.5 to

32 mm

M3 to M20

1,050

(12.9)M3 to M12

1,050

(12.9) M3 to M24

3/16”

to

5/16”

--

1/8”

to

3/4”

1/16”

to 3/4”

1/4”

to

2”

--

1/2”

to

2-1/4”

1/8”

to

1”

3/16”

to 10”

3/8”

to

1.1/4”

-- --

2269 4762 912 4168

2470

B18.3.1M B1176

6761 -- 7991 4168

2470

B18.3.5M --

7380 9427 4168 B18.3.4M --

--

3/16”

to

3”

6094 4026

4027

4028

4029

913

914

915

916

4168

2470

B18.3.6M B1177

-- 3082 2936 911 4168

2470

B18.3.2M B4648

1/2”

to

12”

1364 4014

4017

931

933

1083

1768

B18.2.1 B1180

--

1364 4032 934 10831768

B18.2.4.1M

B18.2.2

B1181

-- 3757

6623

6649

7412

4775

7415

6914

6915

6916

4395 B18.2.3.7M

B18.2.4.6M

B1186

2.1/4”

to

27”

A193

A194

3/8”

to

12” As per customer specifications

Socket HeadShoulder Screw

Socket Set

Screws Knurled

Cup

Durlok Bolt

Hex

Wrenches

Hex Head

Bolts

Hex Nuts

High Strength

Structural

Bolts, Nuts,

Washers

Stud With 2

Heavy

nuts

Special

Products

PRODUCT

TENSILE STRENGTH

Property Class

Psi. Min.

SIZE RANGE

Diameter

Metric Inch*

Length

Inch*

6 to

410 mm

60

to

500 mm

40 to

300 mm

--

10 to

300 mm

--

3 to

85 mm

6 to

50 mm

6 to

60 mm

6 to

300 mm

Metric

EQUIVALENT STANDARDS

IS ISO DIN BS ANSI JIS

*Thread type in any of the following inch series : BSW, BA, UNC & UNF.** Thread type in NPTFNote : UNBRAKO standards meet, or in many instances, exceed therequirements of the standards listed.

No guarantee can be given for UNBRAKO products which have

been plated by the users and / or outside plates, who may not

have considered hydrogen embrittlement problem.

Plating :

-- (12.9) M6 to M24 --10 to

120 mm-- -- 7379 9841 4168 -- --

12.9-- M6 to M20 --12 to

100 mm--

1/4” to1-1/2”

As Per Unbrako Specification

Page 9: Central Motors - Unbrako pricelist

Unbrako

2

Note : Sizes in brackets are non-preferred standards No guarantee can be given for UNBRAKO products which have been plated by the users and / outside plates, who may not haveconsidered hydrogen embrittlement problem.

Plating :

Thread Size Comparison

COARSE

M3

M4

M5

M6

M8

M10

M12

(M14)

M16

(M18)

M20

(M22)

M24

(M27)

M30

(M33)

M36

(M39)

M42

0.50

0.70

0.80

1.0

1.25

1.50

1.75

2.00

2.00

2.50

2.50

2.50

3.00

3.00

3.50

3.50

4.00

4.00

4.50

51

36

32

25

20

17

14.5

12.5

12.5

10

10

10

8.5

8.50

7.25

7.25

6.40

6.40

5.60

3.00

3.00

2.00

3.00

2.00

2.00

2.00

1.50

1.50

1.50

1.50

1.50

1.25

1.00

1.25

– –

25

20

20

17

17

17

17

17

13

13

13

13

8.5

8.5

8.5

39.00

42.00

33.00

36.00

27.00

30.00

24.00

18.00

20.00

22.00

14.00

16.00

12.00

8.00

10.00

6.00

4.00

5.00

3.00 0.118

0.157

0.197

0.236

0.315

0.394

0.472

0.551

0.630

0.709

0.787

0.866

0.945

1.063

1.181

1.299

1.417

1.535

1.653

METRIC PRODUCTS

THREAD PITCH & T.P.I.

FINESIZE

T.P.I.PITCH(mm) T.P.I. mm

Major Dia

Inch

Major

Dia

#5

#6

#8

#10

1/4

5/16

3/8

1/2

5/8

3/4

7/8

1

1-1/8

1-1/4

1-1/2

40

32

32

24

20

18

16

13

11

10

9

8

7

7

6

44

40

36

32

28

24

24

20

18

16

14

12

12

12

12 1.500

1.250

1.000

1.125

0.750

0.875

0.625

0.500

0.313

0.375

0.250

0.164

0.190

0.125

0.138

UNIFIED INCH PRODUCTS

T.P.I.

SIZE

UNC UNF inch

1/8

5 BA

4 BA

3 BA

3/16

2 BA

1 BA

1/4

0 BA

5/16

3/8

7/16

1/2

5/8

3/4

7/8

1

1-1/8

1-1/4

1-1/2 6

7

8

7

10

9

11

14

12

18

16

20

24

40 -

32

26

22

20

18

16

14

12

11

10

9

9

8 1.500

1.250

1.000

1.125

0.750

0.875

0.625

0.438

0.500

0.313

0.375

0.250

0.187

43.1

38.5

34.8

31.3

28.2

25.4 0.236

0.185

0.209

0.161

0.126

0.142

SIZE

T.P.I.

BSW BSF

T.P.I.

BA

0.125

B.S. INCH PRODUCTS

PITCH(mm)

Major

Dia

inch

Major

Dia

inch

Page 10: Central Motors - Unbrako pricelist

Socket Head Cap Screw

3

M3WRENCH 2.5mm

International Part No.

Price/100 Pcs

Box Quantity

M2WRENCH 1.5mm

3

4

5

6

8

10

12

16

20

25

30

35

40

45

International Part No.

Price/100 Pcs

Box Quantity

Length

M2.5WRENCH 2mm

International Part No.

Price/100 Pcs

Box Quantity

104151

104152

104154

104155

104157

104159

106216

1,250

560

570

580

590

600

620

500

500

500

500

500

500

500

104161

104162

104163

104164

104166

540

560

575

590

650

500

500

500

500

500

106218

103002

122097

113583

120870

103003

113623

103010

103013

106219

406027

700034

881

759

555

464

464

486

486

508

594

742

850

940

500

500

500

500

500

500

500

200

200

200

200

200

M6WRENCH 5mm

International Part No.

Price/100 Pcs

Box Quantity

M4WRENCH 3mm

International Part No.

Price/100 Pcs

Box Quantity

Length

M5WRENCH 4mm

International Part No.

Price/100 Pcs

Box Quantity

106223

113810

113839

121077

103014

105753

125381

103018

103019

103021

103022

103023

400835

180011

755

564

447

403

421

452

468

555

608

673

769

881

1,415

2,839

500

500

500

500

500

500

500

500

200

200

200

200

200

200

122122

122243

121094

103024

113970

121096

103029

115292

103030

103031

103035

103038

103040

106225

106228

700072

404774

181525

551

321

321

352

378

403

464

508

555

604

608

1,042

1,337

1,448

1,559

1,804

1,906

2,104

500

500

500

500

200

200

200

200

200

200

200

200

200

200

200

200

200

200

103042

122111

120872

103044

119790

119937

122121

121090

121075

122087

112624

113128

122088

103047

103048

103049

103051

103052

103053

103054

717

475

475

452

475

532

602

659

717

776

822

920

1,702

1,765

1,841

2,014

2,182

2,344

2,645

3,474

200

200

200

200

200

200

200

200

200

200

200

200

200

200

200

200

200

200

200

100

6

8

10

12

16

20

25

30

35

40

45

50

55

60

65

70

75

80

90

100

110

Metric

Page 11: Central Motors - Unbrako pricelist

Unbrako

4

Socket Head Cap Screw

1. Specifications :2. Threads :3. Material :4. Mechanical Properties :5. Note : 6.

Generally conforming to IS : 2269, DIN : 912, ISO : 4762. ISO Metric (Coarse Series) 4g6g as per IS : 4218, ISO : 261, ISO : 965. Unbrako High Grade Alloy Steel.

Property Class 12.9 as per IS : 1367, ISO : 898 Part I.Upto 80MM Dia can be manufactured against request.

For sizes beyond those listed, prices on application.

Length

10

12

16

20

25

30

35

40

45

50

55

60

65

70

75

80

90

100

110

120

130

140

150

160

170

180

200

220

230

240

260

280

International Part No.

Price/100 Pcs

Box Quantity

M8WRENCH 6mm

103056

114972

103058

122086

119351

119383

122113

113143

121076

121068

103063

121070

103064

103066

103069

103070

103073

103075

103076

103077

106230

106231

106232

106233

921

695

610

605

673

742

806

875

1,021

1,076

1,187

1,277

1,389

1,485

1,575

2,272

2,637

3,128

3,909

4,565

5,540

5,950

6,426

6,855

200

200

200

200

200

200

200

200

200

200

100

100

100

100

100

100

100

100

100

50

50

50

50

100

International Part No.

Price/100 Pcs

Box Quantity

M10WRENCH 8mm

106237

103080

113163

115060

122114

113257

100845

121088

125660

103087

122217

103088

125786

103090

103091

103094

103095

103096

103097

106240

106241

106242

106243

210001

106244

1,106

1,029

1,072

1,024

1,129

1,219

1,488

1,608

1,712

1,848

1,999

2,160

2,328

2,480

3,430

3,921

4,593

5,440

5,502

7,491

8,359

9,297

11,621

12,814

13,074

200

200

200

100

100

100

100

100

100

100

100

100

50

50

50

50

50

50

50

50

50

50

50

25

25

International Part No.

Price/100 Pcs

Box Quantity

M12WRENCH 10mm

100

100

100

100

100

50

50

50

50

50

50

50

50

50

50

25

25

25

25

25

25

20

20

20

20

20

20

20

20

2,606

2,283

2,168

2,207

2,227

2,499

2,318

2,702

2,860

3,003

3,163

3,307

3,969

4,487

4,958

6,106

7,020

8,306

9,261

10,238

16,880

18,558

18,558

20,091

21,625

27,840

32,466

37,101

39,956

112607

122250

122251

125530

114996

115075

112360

122255

122260

122261

103098

103099

103100

103103

122142

125791

103104

103107

103108

103110

107456

181063

107458

107459

400570

183555

400571

400572

400573

International Part No.

Price/100 Pcs

Box Quantity

M14WRENCH 12mm

5,934

5,934

4,989

5,106

5,199

5,316

5,382

5,703

5,789

6,241

6,609

6,917

7,075

8,782

9,542

10,310

11,650

12,437

13,291

14,176

15,062

15,948

400528

400529

400530

400531

400532

120863

400533

112000

400534

400535

400536

400537

400538

400539

400540

400508

180223

180103

180225

180226

210002

180227

50

50

50

50

50

50

50

50

50

50

50

20

20

25

25

25

25

25

25

10

10

10

Metric

Grey highlighted items are full threaded

Page 12: Central Motors - Unbrako pricelist

Socket Head Cap Screw

5

Length

20

25

30

35

40

45

50

55

60

65

70

75

80

90

100

110

120

130

140

150

160

170

180

200

220

230

240

260

280

300

International Part No.

Price/100 Pcs

Box Quantity

M16WRENCH 14mm

International Part No.

Price/100 Pcs

Box Quantity

M18WRENCH 14mm

International Part No.

Price/100 Pcs

Box Quantity

M20WRENCH 17mm

International Part No.

Price/100 Pcs

Box Quantity

M22WRENCH 17mm

210003

106248

103112

103113

125751

103115

112474

103117

112594

103118

103119

103120

125658

103122

103123

103124

103126

103127

103128

103129

103364

180418

107460

107448

400574

182815

400575

400576

400577

400578

5,679

5,679

5,679

4,772

4,644

4,978

4,827

5,409

5,186

5,806

6,267

6,626

6,937

7,732

8,809

9,566

10,344

11,791

12,627

13,456

26,794

29,840

29,840

32,975

38,063

43,152

44,720

56,456

68,186

73,057

50

50

50

50

50

50

25

25

25

20

20

20

20

10

10

20

20

20

20

20

10

10

10

10

10

10

10

10

10

10

183894

400541

400542

400606

100844

400543

400544

400545

400546

400547

400549

400550

400551

400548

400552

180311

180229

180407

180230

210005

100231

15,937

16,136

14,130

14,233

14,343

14,432

14,549

14,666

15,663

16,687

17,010

17,354

18,206

20,145

22,065

24,567

26,534

28,506

30,407

36,009

41,612

20

20

20

25

10

10

10

25

10

10

10

10

10

25

15

10

10

10

10

10

10

210006

107465

107466

103130

103131

103132

103136

103137

103138

103141

103142

103143

103144

103145

103146

103148

103150

103151

103152

107462

180495

107463

107464

400553

181001

400554

400555

400556

400557

13,518

13,518

13,696

11,991

12,074

11,562

12,246

11,718

12,451

13,297

14,163

13,717

14,727

15,442

17,093

18,743

20,372

22,009

24,774

31,752

36,262

36,262

37,823

39,397

50,571

61,744

75,742

89,728

96,137

25

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

5

5

5

5

5

180181

180182

180183

180184

180185

210007

180186

180187

180188

180189

180190

180191

180192

180193

180194

180196

180198

210008

210009

210010

210011

210012

16,667

18,750

19,273

21,465

21,864

23,178

24,361

25,557

26,946

29,311

31,676

41,660

48,673

64,892

76,485

81,841

87,596

96,246

103,891

111,530

119,169

127,682

10

10

10

10

10

10

10

10

10

10

5

5

5

5

5

5

5

5

5

5

5

5

1. Specifications :

2. Threads :

3. Material :

4. Mechanical Properties :

5. Note :

6.

Generally conforming to IS : 2269, DIN : 912, ISO : 4762.

ISO Metric (Coarse Series) 4g6g as per IS : 4218, ISO : 261, ISO : 965.

Unbrako High Grade Alloy Steel.

Property Class 12.9 as per IS : 1367, ISO : 898 Part I.

Upto 80MM Dia can be manufactured against request.

For sizes beyond those listed, prices on application.

Metric

Grey highlighted items are full threaded

Page 13: Central Motors - Unbrako pricelist

Unbrako

6

Socket Head Cap Screw

1. Specifications :

2. Threads :

3. Material :

4. Mechanical Properties :

5. Note :

6.

Generally conforming to IS : 2269, DIN : 912, ISO : 4762.

ISO Metric (Coarse Series) 4g6g as per IS : 4218, ISO : 261, ISO : 965.

Unbrako High Grade Alloy Steel.

Property Class 12.9 as per IS : 1367, ISO : 898 Part I.

Upto 80MM Dia can be manufactured against request.

For sizes beyond those listed, prices on application.

M30WRENCH 22mm

International Part No.

Price/100 Pcs

Box Quantity

M24WRENCH 19mm

International Part No.

Price/100 Pcs

Box Quantity

Length

M27WRENCH 19mm

International Part No.

Price/100 Pcs

Box Quantity

103153

103155

103157

103158

103159

103160

103161

103162

103163

103165

103166

103167

103168

103170

103171

104143

104146

104147

400560

400561

400562

400563

400564

15,536

14,882

16,748

17,215

18,303

19,527

20,688

21,760

22,826

24,072

26,169

28,293

30,412

32,522

34,646

56,086

60,183

64,425

68,949

73,480

75,777

79,613

85,301

10

10

10

10

10

10

10

10

10

10

10

10

5

5

5

5

5

5

5

5

5

5

5

45

50

55

60

65

70

75

80

90

100

110

120

130

140

150

160

180

200

220

240

260

280

300

34,118

35,850

37,211

40,944

43,674

46,405

49,134

52,544

54,593

58,009

91,447

101,003

109,880

136,970

151,773

165,319

176,444

186,151

31,321

31,105

33,496

35,893

37,247

39,129

43,723

46,453

49,183

52,597

54,649

58,072

87,389

96,514

104,992

130,376

140,209

149,994

159,825

169,657

Metric

Grey highlighted items are full threaded

Page 14: Central Motors - Unbrako pricelist

Socket Head Cap Screw

7

1. Specifications :

2. Threads :

3. Material :

4. Mechanical Properties :

5. Note :

6.

Generally conforming to IS : 2269, DIN : 912, ISO : 4762.

ISO Metric (Coarse Series) 4g6g as per IS : 4218, ISO : 261, ISO : 965.

Unbrako High Grade Alloy Steel.

Property Class 12.9 as per IS : 1367, ISO : 898 Part I.

Upto 80MM Dia can be manufactured against request.

For sizes beyond those listed, prices on application.

M42WRENCH 32mm

International Part No.

Price/100 Pcs

Box Quantity

M33WRENCH 24mm

International Part No.

Price/100 Pcs

Box Quantity

Length

M36WRENCH 27mm

International Part No.

Price/100 Pcs

Box Quantity

75

80

90

100

110

120

130

140

150

160

180

200

220

240

260

280

300

103,678

110,493

116,666

123,425

129,599

136,420

143,172

194,795

212,513

230,231

280,988

301,072

321,129

341,205

361,276

53,912

55,961

60,739

63,469

66,887

73,013

76,437

81,216

85,314

112,953

125,571

136,490

169,149

182,219

190,621

201,114

216,818

65,394

71,397

73,412

77,399

80,741

83,416

92,093

95,414

128,402

143,468

155,480

192,237

197,525

211,544

225,605

239,672

Grey highlighted items are full threaded

Metric

Page 15: Central Motors - Unbrako pricelist

Unbrako

8

Socket Head Cap Screw

Length

3/8

1/2

5/8

3/4

7/8

1

1-1/4

1-1/2

1-3/4

2

2-1/4

2-1/2

2-3/4

3

3-1/4

3-1/2

4

4-1/2

5

5-1/2

6

International Part No.

Price/100 Pcs

Box Quantity

International Part No.

Price/100 Pcs

Box Quantity

International Part No.

Price/100 Pcs

Box Quantity

International Part No.

Price/100 Pcs

Box Quantity

3/16WRENCH 5/32” mm

1/4WRENCH 3/16” mm

400056

400057

400058

400059

400061

400062

400063

400064

400065

210021

400066

405

405

377

405

454

501

573

686

686

772

858

200

200

200

200

200

200

200

200

200

200

200

400068

400069

400070

400071

400072

400073

400074

400075

400076

400077

400078

400079

400080

400081

400082

400083

400084

475

475

452

475

504

532

602

671

822

822

1,666

1,714

1,951

1,951

2,338

2,338

2,576

200

200

200

200

200

200

200

200

200

200

200

200

200

200

200

200

100

5/16WRENCH 7/32” mm

400085

400086

400087

400088

400089

400090

400091

400092

400093

400094

400095

404433

400096

701026

400098

400099

400100

701030

656

575

600

625

669

767

858

1,014

1,014

1,218

1,218

1,486

1,486

2,481

2,481

2,944

4,619

5,350

200

200

200

200

200

200

200

200

200

200

100

100

100

100

100

100

100

100

3/8WRENCH 5/16” mm

400101

400102

400103

400104

400105

400106

400107

400114

400109

400110

400111

400112

400113

400114

400115

400116

400117

400118

400181

400119

993

933

851

944

944

1,035

1,153

1,376

1,431

1,650

1,725

1,984

1,984

2,906

2,976

3,493

5,150

6,282

7,551

7,776

200

200

200

200

200

100

100

50

100

100

100

100

100

50

50

50

50

50

50

50

1. Specifications :

2. Threads :

3. Material :

4. Mechanical Properties :

5. Note :

Generally conforming to BS : 2470.

BS Whitworth Fine, Medium as per BS : 84.

Unbrako High Grade Alloy Steel.

As per BS 2470

Upto 4 Inch Dia can be manufactured against request.

Grey highlighted items are full threaded

Inch

Page 16: Central Motors - Unbrako pricelist

International Part No.

Price/100 Pcs

Box Quantity

International Part No.

Price/100 Pcs

Box Quantity

LengthInternational

Part No.Price/

100 Pcs Box

Quantity

7/16WRENCH 5/16” mm

1/2WRENCH 3/8” mm

5/8WRENCH 1/2” mm

2,225

2,225

2,269

2,426

2,426

2,788

2,921

3,145

3,295

4,263

4,263

4,937

7,089

7,089

8,082

8,089

400121

400122

400123

400124

400125

210025

701059

210026

400127

210027

400128

400129

210028

210029

210030

210031

100

100

100

100

100

50

50

50

20

50

50

20

50

25

50

25

3/4

7/8

1

1-1/4

1-1/2

1-3/4

2

2-1/4

2-1/2

2-3/4

3

3-1/4

3-1/2

4

4-1/2

5

5-1/2

6

6-1/2

7

7-1/2

8

8-1/2

9

10

400130

402942

400131

400132

400133

400134

400135

400136

400137

400138

400139

400140

400141

400142

400143

400144

400145

400146

400147

400148

210032

400149

2,606

2,606

2,276

2,385

2,427

2,594

2,712

3,125

3,260

3,540

3,848

4,602

4,602

5,323

6,538

7,831

8,622

8,925

17,705

18,565

19,293

20,104

100

100

100

100

50

50

50

50

50

50

50

50

20

25

25

25

20

20

20

15

15

25

210033

400150

400151

400152

400153

400154

400155

400156

400157

400158

701096

400159

400160

400161

400162

400163

400164

400165

400166

210035

400167

210036

210037

210038

4,919

4,919

4,276

4,425

4,707

4,931

5,357

5,357

5,881

5,881

6,572

6,858

8,147

8,644

9,534

11,839

12,901

27,403

27,403

28,453

30,222

39,547

39629

51855

50

50

50

50

50

20

20

20

20

20

10

10

10

15

15

20

20

10

10

10

10

10

10

10

Socket Head Cap Screw

9

1. Specifications :

2. Threads :

3. Material :

4. Mechanical Properties :

5. Note :

Generally conforming to BS : 2470.

BS Whitworth Fine, Medium as per BS : 84.

Unbrako High Grade Alloy Steel.

As per BS 2470

Upto 4 Inch Dia can be manufactured against request.

Grey highlighted items are full threaded

Inch

Page 17: Central Motors - Unbrako pricelist

Unbrako

10

Socket Head Cap Screw

International Part No.

Price/100 Pcs

Box Quantity

International Part No.

Price/100 Pcs

Box Quantity

LengthInternational

Part No.Price/

100 Pcs Box

Quantity

1

1-1/4

1-1/2

1-3/4

2

2-1/4

2-1/2

2-3/4

3

3-1/4

3-1/2

4

4-1/2

5

5-1/2

6

6-1/2

7

7-1/2

8

8-1/2

9

10

3/4WRENCH 9/16” mm

7/8WRENCH 9/16” mm

1WRENCH 5/8” mm

50

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

5

12,277

12,277

10,827

11,075

11,075

11,314

11,314

12,876

12,876

13,377

13,377

14,027

17,052

18,527

20,501

22,502

29,566

30,253

30,940

31,566

36,628

36,628

40,698

210039

400168

400169

400170

400171

400172

400173

400174

400175

400176

400177

400178

400179

400180

700121

400182

400183

400184

210040

400185

210041

400186

701127

400187

210043

400188

404637

400189

210044

400190

701133

400191

400192

701136

701137

210047

400193

210048

701139

210050

210051

210052

210053

17,438

18,127

18,127

19,527

19,527

21,959

22,002

24,266

24,266

25,602

30,104

32,341

34,615

36,867

64,006

64,006

66,319

67,757

71,507

71,507

10

10

10

10

10

10

10

10

10

10

10

10

10

10

5

5

5

5

5

5

210054

210055

400194

404571

400195

210056

400196

210057

400197

400198

400199

400200

183785

400201

210059

400202

210060

400203

210061

210062

210063

15,902

16,527

17,314

18,663

18,663

21,021

21,021

23,180

23,180

25,604

28,681

30,908

33,069

36,906

59,068

61,193

63,381

65,506

71,632

73,695

81,884

15

15

10

10

10

10

10

10

10

5

5

5

5

5

5

5

5

5

5

5

5

1. Specifications :

2. Threads :

3. Material :

4. Mechanical Properties :

5. Note :

Generally conforming to BS : 2470.

BS Whitworth Fine, Medium as per BS : 84.

Unbrako High Grade Alloy Steel.

As per BS 2470

Upto 4 Inch Dia can be manufactured against request.

Grey highlighted items are full threaded

Inch

Page 18: Central Motors - Unbrako pricelist

11

Socket Countersunk Head Cap Screws (CSK)

Length

6

8

10

12

16

20

25

30

35

40

45

50

55

60

International Part No.

Price/100 Pcs

International Part No.

Price/100 Pcs

International Part No.

Price/100 Pcs

International Part No.

Price/100 Pcs

International Part No.

Price/100 Pcs

M3WRENCH 2mm

106283

103303

103304

103305

103306

103308

106284

778

919

987

1,059

1,200

1,341

1,483

103309

103311

103312

103313

103315

103316

103317

220001

220002

220003

220004

499

499

529

569

617

719

869

1,803

1,929

2,170

2,411

M4WRENCH 2.5mm

103318

103319

103320

103321

103322

103324

106289

220005

220006

220007

103323

738

510

529

569

612

719

869

1,157

1,803

2,029

2,253

M5WRENCH 3mm

M6WRENCH 4mm

M8WRENCH 5mm

103328

103329

103330

103331

103332

103333

103334

103335

220008

220009

220010

564

564

617

660

773

889

1,011

1,157

2,060

2,576

2,833

103337

103338

103340

103341

103342

103343

103344

106297

220011

220012

220013

736

736

788

904

1,035

1,176

1,341

1,507

2,361

2,818

3,074

200Qty. Per Box

1. Note :

2. Specification :

3. Threads :

4. Material :

5. Mechanical Properties :

All sizes are fully threaded.

Generally conforming to IS : 6761, DIN 7991.

ISO Metric, 4g6g as per IS : 4218.

UNBRAKO High Grade Alloy Steel.

Property Class 12.9 as per IS : 1367, ISO : 898 Part - 1

Metric

Page 19: Central Motors - Unbrako pricelist

Unbrako

12

Socket Countersunk Head Cap Screws (CSK)

1. Note :

2. Specification :

3. Threads :

4. Material :

5. Mechanical Properties :

6.

All sizes are fully threaded.

Generally conforming to IS : 6761, DIN 7991.

ISO Metric, 4g6g as per IS : 4218.

UNBRAKO High Grade Alloy Steel.

Property Class 12.9 as per IS : 1367, ISO : 898 Part - 1

Bold black lines are used to indicate quantity per box.

LengthInternational

Part No.Price/

100 Pcs International

Part No.Price/

100 Pcs International

Part No.Price/

100 Pcs International

Part No.Price/

100 Pcs International

Part No.Price/

100 Pcs

Qty. Per Box

16

20

25

30

35

40

45

50

55

60

65

70

75

80

90

100

110

120

130

M10WRENCH 6mm

M12WRENCH 8mm

103347

103348

103349

103350

103351

103352

106302

106303

106304

220014

220015

220016

220017

220018

220019

1,196

1,116

1,294

1,483

1,705

1,955

2,200

2,483

2,818

3,074

3,331

3,587

4,612

4,918

5,534

103354

103355

103356

103357

106311

103358

106312

106313

220020

220021

220022

220023

2,179

2,495

2,683

2,974

3,275

3,572

4,421

4,765

5,420

5,837

6,254

6,672

M16WRENCH 10mm

103359

103360

103361

106318

103362

106320

103363

183908

106321

220025

220026

106325

629621

4,689

5,054

5,414

6,598

6,138

7,426

7,836

8,246

8,657

9,831

10,275

11,231

12,477

M20WRENCH 12mm

106332

106334

106335

106336

106337

183912

106338

183913

106339

106341

106342

220029

220030

220031

10,675

11,452

12,209

12,958

13,703

14,480

15,257

16,585

20,615

21,428

24,514

27,105

29,692

31,980

220032

220033

401689

220034

401690

220035

401691

401692

401693

701356

183179

701358

19,735

21,389

23,042

24,696

26,350

28,004

29,657

32,965

37,485

42,005

46,526

51,046

5102550100

M24WRENCH 14mm

Quantity per box 25

Quantity per box 200

Metric

Page 20: Central Motors - Unbrako pricelist

Separate catalogue is available on request

Length

10

12

15

16

20

25

30

40

50

60

70

80

90

100

International Part No.

Price/100 Pcs

Box Quantity

International Part No.

Price/100 Pcs

Box Quantity

International Part No.

Price/100 Pcs

Box Quantity

International Part No.

Price/100 Pcs

Box Quantity

M6 (M5)WRENCH 3 mm

M8 (M6)WRENCH 4 mm

105364

105365

401484

105366

105368

105370

105372

105373

3,874

4,203

4,854

4,854

5,506

6,322

7,138

8,419

50

50

50

50

50

50

50

50

105375

401486

105377

105379

105380

105381

105383

105386

3,867

4,829

4,985

5,595

6,360

7,127

8,656

9,505

50

50

50

50

50

50

50

50

401487

105388

105390

105392

105393

105394

105395

105396

105402

106422

50

50

50

50

50

50

50

50

50

50

5,919

6,088

6,763

7,612

8,456

10,144

10,654

11,261

12,684

14,091

M10 (M8)WRENCH 5 mm

M12 (M10)WRENCH 4 mm

401485

105404

105406

105407

105410

105411

105412

105416

105417

105420

105427

105433

12,851

7,912

8,705

9,702

10,698

12,689

14,190

16,115

17,121

17,900

18,115

21,352

25

25

25

25

25

25

25

25

25

25

25

25

International Part No.

Price/100 Pcs

Box Quantity

International Part No.

Price/100 Pcs

Box Quantity

International Part No.

Price/100 Pcs

Box Quantity

Length

M16 (M12)WRENCH 8 mm

M20 (M16)WRENCH 10 mm

M24 (M20)WRENCH 12 mm

105434

105435

105436

105437

105438

105440

106343

106344

106346

16,460

19,354

22,247

25,138

28,032

29,892

30,999

36,709

56,658

25

25

25

25

25

25

25

25

25

30

40

50

60

70

80

90

100

120

105441

105442

105444

105448

105449

105450

106347

106348

45,153

51,072

56,988

62,907

68,824

74,743

80,659

92,494

10

10

10

10

10

10

10

10

401488

401489

401490

401491

401492

401493

401494

156,172

170,873

185,574

200,280

214,980

229,681

259,088

5

5

5

5

5

5

5

13

Socket Head Shoulder Screws

1. Specification : 2. Thread Class : 3. Material : 4. Mechanical Properties : 5. Method of Specifying :

Generally conforming to BS: 4168, DIN 9841, ISO 7379.4g6g (Precision Ground to h8 tolerance on the Shoulder (Size Indicator Ground Diameter)

Unbrako High Grade Alloy Steel. Properties Class conforming to 12.9 as per ISO: 898 Part-I.

The nominal diameter of a shoulder screw is the diameter of the shoulder & not the thread diameter but it is recommended that both are quoted, e.g. 16mm (M12) x 70mm long to BS 4168.

New

Page 21: Central Motors - Unbrako pricelist

Unbrako

14

LengthInternational

Part No.Price/

100 Pcs International

Part No.Price/

100 Pcs International

Part No.Price/

100 Pcs International

Part No.Price/

100 Pcs International

Part No.Price/

100 Pcs

M3Wrench 1.5 mm

M4Wrench 2 mm

M5Wrench 2.5 mm

3

4

5

6

8

10

12

16

20

25

30

35

40

45

50

55

60

65

Qty. Per Box

104076

103172

103175

103176

103177

103178

103179

103180

551093

310

314

318

322

327

344

366

458

506

103182

103185

103186

103187

103188

103189

103191

103193

701961

406498

551679

551680

270

270

274

278

298

314

449

520

563

1,079

1,365

1,755

103194

103195

103196

103197

103198

103199

103202

103203

103204

181179

551094

187

191

191

207

238

291

339

392

546

848

1,008

M6Wrench 3 mm

M8Wrench 4 mm

103207

103208

103209

103211

103212

103214

103217

103218

103219

103220

103221

103222

191

207

234

261

343

371

465

632

942

1,065

1,165

1,371

180002

103224

103227

103228

103229

103230

103231

103235

103236

103237

701998

103240

551095

551096

551097

366

230

234

291

344

446

552

645

887

1,050

1,148

1,279

2,210

2,412

2,791

200

Socket Set Screws (Grub Screws) Metric

1. Specification :

2. Threads :

3. Material :

4. Mechanical Properties :

5. NOTE :

Generally conforming to the following standards

ISO Metric, 4g6g as per IS:4218. ISO 261, ISO 965.

Unbrako High Grade Alloy Steel.

Property Class 45H as per IS : 1367, ISO:898 Part V.

PRICE FOR SPECIAL POINT SHOWN BELOW WILL BE 25% EXTRA.

ISO ISO-4026 ISO-4027 ISO-4028 ISO-4029

Knurled cup point

Page 22: Central Motors - Unbrako pricelist

LengthInternational

Part No.Price/

100 Pcs

M10Wrench 5 mm

8

10

12

16

20

25

30

35

40

45

50

55

60

65

70

75

80

International Part No.

Price/100 Pcs

International Part No.

Price/100 Pcs

International Part No.

Price/100 Pcs

M12Wrench 6 mm

M16Wrench 8 mm

M20Wrench 10 mm

180099

103241

103244

103245

103246

103247

103249

103251

103252

103253

103254

551098

183091

551099

420

326

369

493

608

736

1,060

1,224

1,358

1,555

1,854

2,982

3,325

3,470

551687

103256

103258

103259

103260

103261

103262

103263

103269

103270

103271

103272

551100

551101

625

539

644

795

1,091

1,261

1,712

1,899

2,109

2,302

3,975

4,464

5,568

5,998

106352

103274

103276

103277

103278

103279

103281

103282

103283

103284

551102

182790

551103

551104

1,429

1,438

1,949

2,308

2,886

3,346

3,706

4,447

5,644

6,208

7,154

9,106

10,209

10,890

104149

103286

103287

103288

103289

103290

103292

103293

103294

551105

551106

551107

4,704

5,249

6,068

6,918

7,736

8,588

9,395

11,110

11,805

13,304

14,043

15,268

50100

Quantity per box 200

15

Socket Set Screws (Grub Screws)

1. Specification :

2. Threads :

3. Material :

4. Mechanical Properties :

5. NOTE :

6.

Generally conforming to the following standards

ISO Metric, 4g6g as per IS:4218. ISO 261, ISO 965.

Unbrako High Grade Alloy Steel.

Property Class 45H as per IS : 1367, ISO:898 Part V.

PRICE FOR SPECIAL POINT SHOWN BELOW WILL BE 25% EXTRA.

Bold black lines are used to indicate quantity per box.

ISO ISO-4026 ISO-4027 ISO-4028 ISO-4029

Knurled Cup Point

Qty. Per Box

Metric

Page 23: Central Motors - Unbrako pricelist

Unbrako

16

Socket Set Screws (Grub Screws)

LengthInternational

Part No.Price/

100 Pcs International

Part No.Price/

100 Pcs International

Part No.Price/

100 Pcs International

Part No.Price/

100 Pcs

3/16Wrench 3/32” mm

1/4Wrench 1/8” mm

5/16Wrench 5/32” mm

3/8Wrench 3/16” mm

3/16

1/4

5/16

3/8

1/2

5/8

3/4

1

1 1/4

1 1/2

1 3/4

2

400949

400951

400952

400953

400954

551209

400956

400957

187

191

191

207

227

256

331

467

400961

400963

400965

400967

400969

400970

400972

400973

400974

551108

180730

212

230

234

238

310

471

472

534

903

1,143

1,242

400986

400977

400978

400979

400980

400982

400984

400983

551109

400985

230

234

243

301

394

552

671

1,323

1,413

1,673

400988

400989

400990

400991

400993

400994

400995

400996

400997

274

369

448

538

658

946

1,678

2,026

2,392

Qty. Per Box 200 100

Price/100 Pcs

Price/100 Pcs

Length

1/2Wrench 1/4” mm

5/8Wrench 5/16” mm

3/4Wrench 3/8” mm

Qty. Per Box 100 50

International Part No.

Price/100 Pcs

International Part No.

International Part No.

401003

401005

401006

401008

401009

401003

401012

401013

401014

702408

641

700

884

1,091

1,523

3,635

4,605

5,037

6,342

7,776

401015

401016

401017

401018

401019

401020

401021

401022

401023

1,653

1,750

2,021

2,554

4,924

6,461

5,874

8,560

10,390

401024

401025

551110

401026

401027

401028

401029

401030

3,774

4,544

5,598

7,786

9,166

10,784

13,201

15,903

1/2

5/8

3/4

1

1 1/4

1 1/2

1 3/4

2

2 1/2

3

1. Specification :

2. Threads :

3. Material :

4. Mechanical Properties :

5. NOTE :

6.

7.

As per standard ASME/ANSI:B18.3.

BS Whitworth, Medium as per BS : 84

Unbrako High Grade Alloy Steel.

As per BS : 2470.

PRICES FOR SPECIAL POINTS 25% EXTRA.

Socket set screws with BSF/UNC/UNF threads can also be manufactured subject to MOQ. Price on request.

Bold black lines are used to indicate quantity per box.

Inch

Page 24: Central Motors - Unbrako pricelist

LengthInternational

Part No.Price/

100 Pcs Box

QuantityInternational

Part No.Price/

100 Pcs Box

QuantityInternational

Part No.Price/

100 Pcs Box

QuantityInternational

Part No.Price/

100 Pcs Box

Quantity

M3Wrench 2mm

M4Wrench 2.5mm

M5Wrench 3mm

M6Wrench 4mm

5

6

8

10

12

15

16

18

20

22

25

30

180248

106353

106354

106357

106358

106359

200

200

200

200

200

200

680

680

551

633

704

891

180200

106360

106331

106363

401218

106364

200

200

200

200

200

200

492

492

492

539

657

657

180398

180175

106365

106366

401219

106367

406269

106368

401220

106369

106370

200

200

200

200

200

200

200

200

200

200

200

938

929

492

539

633

633

1,384

750

1,618

891

1,008

180249

106372

106373

401222

106374

401223

106375

106375

106378

200

200

200

200

200

200

200

200

200

1,771

645

657

750

750

750

809

844

880

International Part No.

Price/100 Pcs

Box Quantity

International Part No.

Price/100 Pcs

Box Quantity

International Part No.

Price/100 Pcs

Box Quantity

Length

M8Wrench 5mm

M10Wrench 6mm

M12Wrench 8mm

10

12

15

16

20

25

30

35

40

50

106379

106380

401226

106382

106384

106385

106386

106389

106390

200

200

200

200

200

200

200

200

200

1,079

915

938

938

961

1,126

1,290

1,571

1,759

106392

106393

106396

106399

106401

106402

200

200

200

200

200

100

1,876

1,278

1,466

1,642

1,841

2,040

106403

106404

106405

106406

106407

106408

106413

100

100

100

100

100

50

50

3,166

3,400

3,541

3,963

4,385

4,807

5,651

17

ISO Metric Button Head Socket Screws

New

1. Specification :

2. Thread :

3. Material :

4. Mechanical Properties :

Generally conforming to BS: 4168.

ISO Metric (Coarse Series) 4g6g.

Unbrako High Grade Alloy Steel.

Properties Class conforming to 12.9 as per BS: 6104, ISO: 898 Part-I.

Page 25: Central Motors - Unbrako pricelist

Unbrako

18

International Part No.

Price/100 Pcs

Box Quantity

International Part No.

Price/100 Pcs

Box Quantity

International Part No.

Price/100 Pcs

Box Quantity

Length

M3Wrench 2mm

M4Wrench 2.5mm

M5Wrench 3mm

6

8

10

12

16

20

25

404977 2001,158

404982

404983

404984

404986

200

200

200

200

1,020

1,185

1,313

1,571

404988

404989

404991

404992

404994

200

200

200

200

200

1,055

1,149

1,384

1,454

1,548

International Part No.

Price/100 Pcs

Box Quantity

International Part No.

Price/100 Pcs

Box Quantity

International Part No.

Price/100 Pcs

Box Quantity

Length

10

12

16

20

25

30

40

M6Wrench 4mm

M8Wrench 5mm

M10Wrench 6mm

180079

404997

404999

405001

405003

405004

200

200

200

200

200

200

1,513

1,489

1,747

1,996

2,310

2,626

405005

405007

405009

405011

405012

405013

405015

200

200

200

200

200

200

200

3,213

1,454

1,688

1,899

2,193

2,486

3,049

405016

405017

405018

405019

200

200

200

200

2,931

3,283

3,729

4,186

1. Specification :

2. Thread :

3. Material :

4. Mechanical Properties :

Generally conforming to Unbrako specification.

ISO Metric (Coarse Series) 4g6g.

Unbrako High Grade Alloy Steel.

Properties Class conforming to 12.9 as per ISO: 898 Part-I.

Metric Flange Button Socket Screws

New

Page 26: Central Motors - Unbrako pricelist

19

New

LengthInternational

Part No.Price/

100 Pcs Box

QuantityInternational

Part No.Price/

100 Pcs Box

QuantityInternational

Part No.Price/

100 Pcs Box

QuantityInternational

Part No.Price/

100 Pcs Box

Quantity

M6 M8 M10 M12

12

16

20

25

30

35

40

45

50

55

60

70

80

190540

190560

190160

190170

190180

2,697

2,064

2,275

2,533

2,791

200

200

200

200

200

190570

190590

190210

190220

190230

190600

190240

408127

190610

407393

2,767

2,439

2,638

2,908

3,166

3,447

3,705

4,338

4,643

5,218

200

200

200

200

200

200

200

200

100

200

3,225

2,521

2,744

2,990

3,729

4,010

4,291

4,573

190620

190270

190280

190290

190630

190300

190640

190310

200

200

200

200

200

100

100

100

183640

190320

190330

190660

190340

190670

190350

190680

190360

190700

190710

100

100

100

100

50

50

50

50

50

50

50

4,643

4,760

4,807

4,925

5,300

5,651

6,003

6,355

7,058

7,809

8,536

International Part No.

Price/100 Pcs

Box Quantity

International Part No.

Price/100 Pcs

Box Quantity

International Part No.

Price/100 Pcs

Box Quantity

Length

M14 M16 M20

190730

190370

190740

190380

190750

190760

190770

9,216

9,615

10,201

10,318

10,623

11,256

12,100

25

25

25

25

25

25

25

190410

190420

190430

190820

190440

405105

190450

190460

190855

190860

190870

20,589

20,589

20,589

16,157

16,603

17,470

18,690

20,448

21,340

23,051

24,740

25

25

25

25

25

25

25

25

25

25

25

25

30

35

40

45

50

55

60

70

80

90

100

34,003

29,899

33,534

35,175

38,224

41,272

190875

405793

190885

190890

190900

190910

25

25

25

25

25

25

® Durlok Bolts

1. Specification :

2. Thread :

3. Material :

4. Mechanical Properties :

Conforming to Unbrako Standard. (Separate catalogue available on request).

Conforming to DIN 13 Medium Fit (6g)

Unbrako High Grade Alloy Steel.

Property Class 12.9 as per 898 part-1.

Page 27: Central Motors - Unbrako pricelist

Unbrako

20

New

® Durlok Nuts

M6

M8

M10

M12

M14

M16

M20

Length International Part No Price/100 Pcs Box Quantity

404916

404917

405202

404918

405240

404915

403618

765

1,150

1,740

3,200

4,900

5,900

12,500

200

200

200

100

50

50

50

M3

M3.5

M3.5L

M4

M4L

M5

M5L

M6

M6L

M8

M8L

M10

M10L

M12

M12L

M14

M14L

M16

Length International Part No

Price/100 Pcs

Box Quantity

Length International Part No

Price/100 Pcs

Box Quantity

183790

183791

184790

183792

184791

183793

184792

183794

184793

183795

184794

183796

184795

183797

184796

183798

184797

183799

200

200

200

200

200

200

200

200

200

200

200

200

200

200

100

100

100

100

1,899

1,899

1,899

1,899

1,899

1,899

2,026

2,026

2,153

2,153

2,533

2,533

3,799

4,052

5,952

5,952

8,611

5,572

M16L

M18

M18L

M20

M20L

M22

M22L

M24

M24L

M27

M27L

M30

M30L

M33

M33L

M36

M39

M42

184798

183800

184799

183801

184800

183802

184801

183803

184802

183804

184803

183805

184804

183806

184805

183807

183808

183809

100

100

100

100

100

100

100

100

50

50

25

50

25

25

25

25

25

25

8,611

8,611

15,196

8,611

15,196

11,903

22,540

15,196

27,352

21,907

27,352

23,553

34,697

26,592

34,697

33,304

34,697

36,976

1. Specification : conforming to Unbrako Standard. 2. Thread :

3. Material : 4. Mechanical Properties :

According to DIN 13 6H.

Unbrako High Grade Alloy Steel. Property Class 12.

®Durlok Washers

d = Inner Dia, T = Taper, D = Outer Dia, L = Larger Outer Dia

* Inch series on request. * Stainless Steel prices available on request.

TDd

Page 28: Central Motors - Unbrako pricelist

21

Hex Head Bolts/Screws

LengthInternational

Part No.Price/

100 Pcs Box

QuantityInternational

Part No.Price/

100 Pcs Box

QuantityInternational

Part No.Price/

100 Pcs Box

QuantityInternational

Part No.Price/

100 Pcs Box

Quantity

10

12

16

18

20

22

25

30

35

40

45

50

55

60

65

70

75

80

90

100

110

120

130

140

150

170001

170002

170003

170004

170005

170006

170007

170008

170009

170010

170011

170012

240001

240002

248

257

422

422

365

371

371

370

379

403

454

504

554

605

500

500

500

500

500

500

500

500

500

500

500

500

500

500

M4 M5 M6 M8

170013

170014

170015

170016

170017

170018

170019

170020

170021

170022

170023

170024

170025

170026

170027

170028

240003

263

267

431

431

347

370

370

398

398

422

461

554

583

636

723

779

835

500

500

500

500

500

500

500

500

500

500

500

500

500

200

200

200

200

170029

170030

170031

170032

170033

170034

170035

170036

170037

170038

170039

170040

170041

170042

170043

170044

170045

170046

170047

170048

551178

550866

550867

550868

550869

331

350

362

369

362

375

375

394

419

444

471

504

554

606

657

708

713

752

847

941

1,449

1,575

1,697

1,821

1,945

500

500

500

500

500

500

500

500

200

200

200

200

200

200

100

100

100

100

100

100

100

100

100

100

100

510

515

464

462

526

506

570

664

703

762

828

913

1,031

1,064

1,140

1,185

1,228

1,587

1,912

2,694

2,972

3,253

170049

170050

170051

170052

170053

170054

170055

170056

170057

170058

170059

170060

170061

170062

170063

170064

170065

170066

170067

240010

240011

240012

500

200

200

200

200

200

200

200

200

200

200

100

100

100

100

100

100

100

50

50

50

50

1. Specifications :

2. Threads :

3. Material and Mechanical Properties :

4. Note :

5.

6.

Generally conforming to IS : 1364, ISO : 4014/4017, DIN 931/933.

ISO Metric 6g as per IS:4218.

Property Class 10.9 as per IS : 1367.

Shaded size are fully threaded. Prices for fully threaded screws beyond shaded sizes will cost 10% extra.

Orders for Property class 8.8 can be accepted subject to our confirmation on the basis of item wise quantities.

Price list for 8.8 available separately.

Upto 80MM Dia can be manufactured against request.

Grey highlighted items are full threaded

Metric

Page 29: Central Motors - Unbrako pricelist

UnbrakoHex Head Bolts/Screws

22

LengthInternational

Part No.Price/

100 Pcs Box

QuantityInternational

Part No.Price/

100 Pcs Box

QuantityInternational

Part No.Price/

100 Pcs Box

QuantityInternational

Part No.Price/

100 Pcs Box

Quantity

M10 M12 M14 M16

16

18

20

22

25

30

35

40

45

50

55

60

65

70

75

80

90

100

110

120

130

140

150

160

180

200

220

240

260

280

300

170068

170069

170070

170071

170072

170073

170074

170075

170076

170077

170078

170079

170080

170081

170082

170083

170084

170085

170086

170087

170088

170089

170090

170091

170092

864

864

816

898

876

945

994

1,215

1,400

1,434

1,504

1,651

1,728

1,817

1,956

2,251

2,495

2,848

3,312

3,605

4,049

4,492

4,813

5,132

5,774

200

200

200

200

200

100

100

100

100

100

100

100

50

50

50

50

50

50

50

25

50

50

30

25

25

170093

170094

170095

170096

170097

170098

170099

170100

170101

170102

170103

170104

170105

170106

170107

170108

170109

170110

170111

170112

170113

170114

170115

170116

170117

170118

170119

170120

1,330

1,455

1,434

1,524

1,724

1,912

2,045

2,208

2,302

2,407

2,703

2,799

2,990

3,198

3,736

4,082

4,356

4,605

5,425

7,300

7,653

8,319

10,994

15,810

16,200

16,548

18,071

19,362

100

100

100

100

100

50

50

50

50

50

50

50

50

25

25

25

25

25

25

25

20

20

25

25

20

20

18

18

170121

170122

170123

170124

170125

170126

170127

170128

170129

170130

170131

170132

170133

170134

170135

170136

170137

170138

170139

170140

170141

2,313

2,493

2,593

2,756

2,995

3,320

3,394

3,546

3,741

3,968

4,162

4,406

4,827

5,555

6,038

6,705

7,207

9,398

10,373

11,584

12,427

50

50

25

25

25

25

25

25

25

25

25

25

25

25

25

25

25

25

25

25

25

170142

170143

170144

170145

170146

170147

170148

170149

170150

170151

170152

170153

170154

170155

170156

170157

170158

170159

170160

170161

170162

170163

170164

170165

170166

170167

170168

170169

170170

3,029

3,029

3,029

3,320

3,320

3,286

3,484

3,743

4,189

4,389

4,532

4,802

5,150

5,952

6,359

6,554

7,321

8,363

9,766

9,969

11,346

12,323

13,860

15,003

19,392

20,870

21,292

23,507

30,216

50

50

25

25

25

25

25

25

25

25

25

25

25

25

25

15

15

15

15

15

15

15

15

10

10

10

10

10

10

1. Specifications :

2. Threads :

3. Material and Mechanical Properties :

4. Note :

5.

6.

Generally conforming to IS : 1364, ISO : 4014/4017, DIN 931/933.

ISO Metric 6g as per IS:4218.

Property Class 10.9 as per IS : 1367.

Shaded size are fully threaded. Prices for fully threaded screws beyond shaded sizes will cost 10% extra.

Orders for Property class 8.8 can be accepted subject to our confirmation on the basis of item wise quantities.

Price list for 8.8 available separately.

Upto 80MM Dia can be manufactured against request.

Grey highlighted items are full threaded

Metric

Page 30: Central Motors - Unbrako pricelist

23

Hex Head Bolts/Screws

International Part No.

Price/100 Pcs

Box Quantity

International Part No.

Price/100 Pcs

Box Quantity

LengthInternational

Part No.Price/

100 Pcs Box

Quantity

M18 M20 M22

170171

170172

170173

170174

170175

170176

170177

170178

170179

170180

170181

170182

170183

170184

170185

170186

170187

170188

170189

240020

240021

240022

240023

240024

5,940

6,191

6,383

6,819

7,033

7,270

7,941

8,405

8,421

8,946

9,912

10,449

11,531

12,057

12,584

13,475

14,512

16,099

17,394

19,133

20,874

22,614

24,354

26,093

25

25

25

25

25

25

25

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

8

8

35

40

45

50

55

60

65

70

75

80

90

100

110

120

130

140

150

160

180

200

220

240

260

280

300

170190

170191

170192

170193

170194

170195

170196

170197

170198

170199

170200

170201

170202

170203

170204

170205

170206

170207

170208

170209

170210

170211

170212

170213

170214

6,649

6,649

6,965

6,867

7,854

7,909

8,219

8,102

9,051

9,318

9,902

10,472

11,869

12,635

13,748

14,671

14,419

17,167

20,100

21,662

30,053

31,560

33,068

36,075

39,066

25

25

25

25

25

25

10

10

10

10

10

10

10

10

10

10

10

10

10

10

5

5

6

6

6

170215

170216

170217

170218

170219

170220

170221

170222

170223

170224

170225

170226

170227

170228

170229

170230

170231

170232

170233

170234

170235

170236

9,860

10,618

10,966

11,743

12,151

12,569

13,080

13,932

14,860

16,176

17,290

18,219

19,131

20,030

22,848

24,813

26,809

41,179

44,607

46,321

51,485

55,163

10

10

10

10

10

10

10

10

10

10

10

10

10

10

5

5

5

5

5

5

5

5

1. Specifications :

2. Threads :

3. Material and Mechanical Properties :

4. Note :

5.

6.

Generally conforming to IS : 1364, ISO : 4014/4017, DIN 931/933.

ISO Metric 6g as per IS:4218.

Property Class 10.9 as per IS : 1367.

Shaded size are fully threaded. Prices for fully threaded screws beyond shaded sizes will cost 10% extra.

Orders for Property class 8.8 can be accepted subject to our confirmation on the basis of item wise quantities.

Price list for 8.8 available separately.

Upto 80MM Dia can be manufactured against request.

Grey highlighted items are full threaded

Metric

Page 31: Central Motors - Unbrako pricelist

UnbrakoHex Head Bolts/Screws

24

International Part No.

Price/100 Pcs

Box Quantity

International Part No.

Price/100 Pcs

Box Quantity

LengthInternational

Part No.Price/

100 Pcs Box

Quantity

M24 M27 M30

50

55

60

65

70

75

80

90

100

110

120

130

140

150

160

170

180

190

200

220

240

260

280

300

12,430

11,894

12,940

13,390

14,194

14,705

16,079

17,170

18,571

19,411

20,371

21,485

22,507

23,606

28,188

29,417

30,648

31,856

33,063

47,400

49,099

50,798

55,866

68,296

170237

170238

170239

170240

170241

170242

170243

170244

170245

170246

170247

170248

170249

170250

170251

240025

170252

240026

170253

170254

170255

170256

170257

170258

10

10

10

10

10

10

10

10

10

5

10

5

5

5

5

5

5

5

5

5

5

4

4

4

170259

170260

170261

170262

170263

170264

170265

170266

170267

170268

170269

170270

170271

170272

170273

170274

170275

170276

170277

170278

170279

170280

24,917

24,917

24,917

24,917

24,917

26,796

28,040

30,528

33,029

35,616

36,519

37,721

40,110

42,498

46,936

51,925

56,560

77,944

84,048

89,561

95,059

99,518

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

4

4

3

3

3

170281

170282

170283

170284

170285

170286

170287

170288

170289

170290

170291

170292

170293

170294

170295

170296

170297

170298

170299

170300

170301

170302

33,029

33,029

33,029

33,029

33,029

33,029

34,372

37,311

40,152

44,166

45,142

47,175

50,101

52,914

59,867

65,931

71,923

86,777

92,883

99,001

105,107

111,199

5

5

5

5

5

5

5

5

5

5

5

5

5

3

3

3

5

3

3

3

2

2

1. Specifications :

2. Threads :

3. Material and Mechanical Properties :

4. Note :

5.

6.

Generally conforming to IS : 1364, ISO : 4014/4017, DIN 931/933.

ISO Metric 6g as per IS:4218.

Property Class 10.9 as per IS : 1367.

Shaded size are fully threaded. Prices for fully threaded screws beyond shaded sizes will cost 10% extra.

Orders for Property class 8.8 can be accepted subject to our confirmation on the basis of item wise quantities.

Price list for 8.8 available separately.

Upto 80MM Dia can be manufactured against request.

Grey highlighted items are full threaded

Metric

Page 32: Central Motors - Unbrako pricelist

25

International Part No.

Price/100 Pcs

Box Quantity

International Part No.

Price/100 Pcs

Box Quantity

LengthInternational

Part No.Price/

100 Pcs Box

Quantity

M33 M36 M42

75

80

90

100

110

120

130

140

150

160

180

200

220

240

260

280

300

170303

170304

170305

170306

170307

170308

170309

170310

170311

170312

170313

170314

170315

170316

170317

170318

170319

45,338

47,939

50,850

54,455

58,553

59,952

63,175

67,090

70,934

74,240

81,293

88,430

106,946

114,831

123,438

132,002

140,554

5

5

5

5

4

4

4

4

4

4

3

3

3

2

2

2

2

170320

170321

170322

170323

170324

170325

170326

170327

170328

170329

170330

170331

170332

170333

170334

170335

57,352

61,719

64,206

68,573

69,902

73,563

77,760

81,929

90,027

104,400

113,163

135,678

145,450

155,210

164,989

198,059

5

3

3

4

3

3

3

3

3

2

2

2

9

8

8

7

170336

170337

170338

170339

170340

170341

170342

170343

170344

170345

170346

170347

170348

170349

170350

90,508

95,709

100,939

101,716

106,012

111,912

117,798

123,692

134,928

141,033

180,902

194,329

207,797

221,239

234,672

3

2

2

2

10

10

9

9

8

7

7

6

6

6

6

Hex Head Bolts/Screws

1. Specifications :

2. Threads :

3. Material and Mechanical Properties :

4. Note :

5.

6.

Generally conforming to IS : 1364, ISO : 4014/4017, DIN 931/933.

ISO Metric 6g as per IS:4218.

Property Class 10.9 as per IS : 1367.

Shaded size are fully threaded. Prices for fully threaded screws beyond shaded sizes will cost 10% extra.

Orders for Property class 8.8 can be accepted subject to our confirmation on the basis of item wise quantities.

Price list for 8.8 available separately.

Upto 80MM Dia can be manufactured against request.

Grey highlighted items are full threaded

Important * long delivery items-subject to extended deliveries ( 3 to 4 months ). Users are advised to plan their requirements in advance.

Metric

Page 33: Central Motors - Unbrako pricelist

Hex Head Bolts/Screws

Unbrako

26

LengthInternational

Part No.Price/

100 Pcs Box

QuantityInternational

Part No.Price/

100 Pcs Box

QuantityInternational

Part No.Price/

100 Pcs Box

QuantityInternational

Part No.Price/

100 Pcs Box

Quantity

1/4 5/16 3/8 1/2

1/2

5/8

3/4

7/8

1

1-1/4

1-1/2

1-3/4

2

2-1/4

2-1/2

2-3/4

3

3-1/4

3-1/2

3-3/4

4

4 1/4

4 1/2

5

5 1/2

6

6-1/2

7

71/2

8

170351

170352

170353

170354

170355

170356

170357

170358

170359

170360

170361

170362

170363

240027

240028

240029

240030

399

495

450

406

443

450

502

550

604

663

738

812

887

1,022

1,034

1,103

1,183

500

500

500

500

200

200

200

200

200

200

200

200

200

200

200

100

100

170364

170365

170366

170367

170368

170369

170370

170371

170372

170373

170374

170375

170376

170377

170378

170379

170380

532

510

487

532

530

583

715

802

848

939

1,031

1,114

1,173

1,251

1,348

1,664

1,838

500

500

200

200

200

200

200

200

200

100

100

100

100

100

100

100

100

857

857

747

902

737

823

930

1,086

1,191

1,306

1,433

1,596

1,691

1,870

1,922

2,356

2,533

2,816

2,981

3,312

3,643

3,974

170381

170382

170383

170384

170385

170386

170387

170388

170389

170390

170391

170392

170393

170394

170395

170396

170397

170398

170399

240034

240035

240036

200

200

200

200

200

200

100

100

100

100

100

100

100

50

50

25

25

25

25

50

50

50

170400

170401

170402

170403

170404

170405

170406

170407

170408

170409

170410

170411

170412

170413

170414

170415

170416

170417

170418

170419

240037

170420

170421

170422

100

100

100

100

50

25

25

25

25

25

25

25

25

25

25

25

25

25

25

25

25

20

25

25

1,609

1,596

1,695

1,878

2,003

2,169

2,361

2,607

2,776

3,005

3,371

3,615

3,739

3,935

4,099

4,353

4,742

5,180

6,324

7,678

9,432

11,536

12,363

13,187

1. Specifications :

2. Threads :

3. Material & Mechanical Properties :

4.Note :

:

Generally conforming to ANSI B 18.2.1 for BSF BS : 1083

Unified Coarse, 2A as per ANSI B1.1. For BSF BS : 84.

Grade 8 as per SAE J 429 for BSF BS : 1083.

Non-shaded sizes if required in full thread will cost 10% extra. BSF threading will cost 15% extra

Upto 4 Inch Dia can be manufactured against request.

Grey highlighted items are full threaded

Inch

Page 34: Central Motors - Unbrako pricelist

Hex Head Bolts/Screws

27

Unified Coarse, 2A as per ANSI B1.1. For BSF BS : 84.

Grade 8 as per SAE J 429 for BSF BS : 1083.

Non-shaded sizes if required in full thread will cost 10% extra. BSF threading will cost 15% extra

Upto 4 Inch Dia can be manufactured against request.

1. Specifications :

2. Threads :

3. Material & Mechanical Properties :

4.Note :

:

Generally conforming to ANSI B 18.2.1 for BSF BS : 1083

LengthInternational

Part No.Price/

100 Pcs Box

Quantity

5/8

International Part No.

Price/100 Pcs

Box Quantity

International Part No.

Price/100 Pcs

Box Quantity

International Part No.

Price/100 Pcs

Box Quantity

1

1.1/4

1.1/2

1.3/4

2

2.1/4

2.1/2

2.3/4

3

3.1/4

3.1/2

3 3/4

4

4 1/4

4 1/2

5

5 1/2

6

6.1/2

7

7.1/2

8

9

10

11

12

3/4 7/8 1

170423

170424

170425

170426

170427

170428

170429

170430

170431

170432

170433

170434

170435

170436

170437

170438

170439

170440

170441

170442

170443

170444

2,962

3,306

3,468

3,700

3,887

4,232

4,631

5,005

5,394

5,744

6,085

6,730

6,908

7,149

7,415

8,347

9,603

10,066

11,744

12,648

13,551

13,798

25

25

25

25

25

25

25

25

25

25

25

25

25

25

25

25

20

10

10

10

10

10

170445

170446

170447

170448

170449

170450

170451

170452

170453

170454

170455

170456

170457

170458

170459

170460

170461

170462

170463

170464

170465

170466

240038

6,087

6,317

6,731

7,392

7,755

8,460

8,792

9,178

9,921

10,649

11,142

11,416

11,944

12,706

14,268

14,648

15,829

15,829

17,008

18,637

19,484

21,920

23,298

25

25

25

25

25

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

8

8

15,914

15,914

12,832

12,832

13,443

14,826

14,826

15,906

16,664

17,666

18,508

19,914

20,980

22,268

23,500

25,940

27,282

28,485

32,366

33,865

170467

170468

170469

170470

170471

170472

170473

170474

170475

170476

170477

170478

170479

170480

170481

170482

170483

170484

170485

170486

10

10

10

10

10

10

10

10

10

10

10

10

10

10

5

5

5

5

5

5

170487

170488

170489

170490

170491

630407

170493

170494

170495

170496

170497

170498

170499

170500

170501

170502

170503

170504

170505

170506

170507

170508

170509

170510

13,298

13,298

13,978

14,520

15,186

16,191

17,734

18,420

19,195

21,129

21,129

23,296

23,296

25,994

28,095

29,395

31,878

34,359

36,763

38,465

43,259

47,436

49,809

54,336

10

10

10

10

10

10

10

10

10

10

10

10

5

5

5

5

5

5

5

5

5

4

4

4

Inch

Grey highlighted items are full threaded

Page 35: Central Motors - Unbrako pricelist

Unbrako

28

Hex Head Bolts/Screws

Unified Coarse, 2A as per ANSI B1.1. For BSF BS : 84.

Grade 8 as per SAE J 429 for BSF BS : 1083.

Non-shaded sizes if required in full thread will cost 10% extra. BSF threading will cost 15% extra

Upto 4 Inch Dia can be manufactured against request.

1. Specifications :

2. Threads :

3. Material & Mechanical Properties :

4.Note :

:

Generally conforming to ANSI B 18.2.1 for BSF BS : 1083

1-3/8

International Part No.

Price/100 Pcs

Box Quantity

1-1/8

International Part No.

Price/100 Pcs

Box Quantity

Length

1-1/4

International Part No.

Price/100 Pcs

Box Quantity

1

1.1/4

1.1/2

1.3/4

2

2.1/4

2.1/2

2.3/4

3

3.1/4

3.1/2

3.3/4

4

4.1/4

4.1/2

5

5.1/2

6

7

7.1/2

8

9

10

170511

170512

170513

170514

170515

170516

170517

170518

170519

170520

170521

170522

170523

170524

170525

170526

170527

170528

170529

170530

170531

170532

170533

14,937

16,199

17,677

18,276

19,680

21,092

22,297

23,500

24,904

26,315

27,518

28,922

30,326

31,737

33,141

35,756

38,564

41,179

46,602

49,210

52,024

72,718

62,870

5

5

10

10

10

5

5

5

5

5

5

5

5

5

5

5

5

5

5

3

3

4

3

170534

170535

170536

170537

170538

170539

170540

170541

170542

170543

170544

170545

170546

170547

170548

170549

170550

29,529

30,932

32,336

34,146

35,756

37,560

39,169

40,773

42,583

45,996

49,210

52,630

59,257

62,471

65,884

72,718

79,343

5

5

5

5

5

5

4

5

4

5

3

4

3

3

3

3

3

170551

170552

170553

170554

170555

170556

170557

170558

170559

170560

170561

170562

170563

170564

170565

170566

170567

35,756

37,360

39,169

41,378

43,388

45,597

47,606

49,815

51,825

56,044

60,262

64,481

72,718

76,937

81,155

89,590

98,028

5

5

5

5

5

5

5

4

4

4

3

3

3

3

3

2

2

Inch

Grey highlighted items are full threaded

Page 36: Central Motors - Unbrako pricelist

Hex Head Bolts/Screws

29

170585

170586

170587

170588

170589

170590

170591

170592

170593

170594

170595

170596

170597

170598

170599

170600

170601

72,662

75,738

78,825

82,128

85,205

88,509

92,258

95,999

99,740

107,231

114,714

122,205

136,732

143,996

151,704

166,678

181,651

3

3

3

2

2

2

2

2

2

2

2

2

2

2

2

2

2

170602

170603

170604

170605

170606

170607

170608

170609

170610

170611

170612

170613

170614

170615

170616

170617

170618

101,725

105,904

109,871

114,050

118,237

122,423

126,602

130,789

135,631

145,543

155,228

165,139

183,853

193,765

203,668

223,046

242,862

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

Unified Coarse, 2A as per ANSI B1.1. For BSF BS : 84.

Grade 8 as per SAE J 429 for BSF BS : 1083.

Non-shaded sizes if required in full thread will cost 10% extra. BSF threading will cost 15% extra

Upto 4 Inch Dia can be manufactured against request.

1. Specifications :

2. Threads :

3. Material & Mechanical Properties :

4.Note :

:

Generally conforming to ANSI B 18.2.1 for BSF BS : 1083

2

International Part No.

Price/100 Pcs

Box Quantity

1-1/2

International Part No.

Price/100 Pcs

Box Quantity

Length

1-3/4

International Part No.

Price/100 Pcs

Box Quantity

2.1/2

2.3/4

3

3.1/4

3.1/2

3.3/4

4

4.1/4

4.1/2

5

5.1/2

6

7

7.1/2

8

9

10

170568

170569

170570

170571

170572

170573

170574

170575

170576

170577

170578

170579

170580

170581

170582

170583

170584

44,991

47,201

49,416

51,419

54,034

56,443

59,057

61,466

64,080

69,097

74,121

79,145

88,786

93,809

98,832

108,873

118,920

5

5

5

4

4

4

3

3

3

3

3

2

2

3

2

2

2

Inch

Grey highlighted items are full threaded

Page 37: Central Motors - Unbrako pricelist

Unbrako

30

High Strength Structural Bolts

M22

International Part No.

Price/100 Pcs

Box Quantity

M16

International Part No.

Price/100 Pcs

Box Quantity

Length

M20

International Part No.

Price/100 Pcs

Box Quantity

300021

300022

300023

300024

300025

300026

300027

300028

300029

300030

300031

300032

300033

300034

300035

300036

300037

300038

300039

300040

7,611

8,190

8,565

8,943

9,558

9,977

10,335

10,728

11,033

11,725

12,402

12,882

13,974

15,027

15,492

16,328

19,447

20,271

21,097

23,660

25

25

25

25

20

20

10

10

10

10

10

10

10

10

10

10

10

10

10

10

40

45

50

55

60

65

70

75

80

90

100

110

120

130

140

150

160

170

180

200

300001

300002

300003

300004

300005

300006

300007

300008

300009

300010

300011

300012

300013

300014

300015

300016

300017

300018

300019

300020

4,118

4,485

4,718

4,873

5,197

5,481

5,791

6,199

6,807

7,139

7,744

8,363

8,822

10,590

10,758

12,755

13,805

14,660

15,515

17,500

25

25

25

25

25

25

25

25

25

25

25

25

15

10

10

10

10

10

10

10

300041

300042

300043

300044

300045

300046

300047

300048

300049

300050

300051

300052

300053

300054

300055

300056

300057

300058

11,615

11,944

12,434

13,570

14,216

14,660

15,176

16,685

17,064

18,420

19,639

20,735

21,683

22,737

25,801

26,882

27,961

30,058

10

10

10

10

10

10

10

10

10

10

10

10

10

10

5

5

5

5

ISO Metric 6g as per IS:4218.

Property Class 10.9S as per IS : 1367. Property Class 10S as per IS : 1367.

1. Specifications : Bolts

2. Threads : Bolts

3. Material and Mechanical Properties :

Bolts: Nuts:

IS : 3757, Nuts : IS 6623, Washers : IS 6649.

Metric

Page 38: Central Motors - Unbrako pricelist

31

M30

International Part No.

Price/100 Pcs

Box Quantity

M24

International Part No.

Price/100 Pcs

Box Quantity

Length

M27

International Part No.

Price/100 Pcs

Box Quantity

300059

300060

300061

300062

300063

300064

300065

300066

300067

300068

300069

300070

300071

300072

300073

300074

300075

15,125

15,660

16,961

17,223

18,734

19,095

21,100

22,664

23,219

24,129

25,176

26,257

27,443

31,184

33,800

35,327

37,953

300076

300077

300078

300079

300080

300081

300082

300083

300084

300085

300086

300087

300088

300089

300090

300091

31,887

33,378

33,153

35,430

37,022

39,334

42,230

43,967

45,191

46,485

49,279

52,044

57,323

63,259

63,119

68,499

300092

300093

300094

300095

300096

300097

300098

300099

300100

300101

300102

300103

300104

42,794

44,309

45,533

48,828

53,153

54,184

56,787

60,152

63,398

71,590

78,699

78,573

85,479

Diameter

International Part No.

Price

Box

M16 M20 M22 M24 M27 M30

131001 131002 131003 131004 131005 131006

2013 4074 4756 6828 11044 13979

100 50 50 25 10 10

Diameter

International Part No.

Price

Box

M16 M20 M22 M24 M27 M30

132001 132002 132003 132004 132005 132006

1275 1595 2270 2401 3859 4803

200 100 100 100 100 100

1. Specifications : Bolts

2. Threads : Bolts

3. Material and Mechanical Properties : Bolts:

Nuts: Washer:

IS : 3757, Nuts : IS 6623, Washers : IS 6649.

ISO Metric 6g as per IS:4218.

Property Class 10.9S as per IS : 1367.

Property Class 10S as per IS : 1367. Hardness: HRC 38-45 as per IS: 6649

10

10

10

10

10

10

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

4

4

4

4

High Strength Structural Bolts

55

60

65

70

75

80

90

100

110

120

130

140

150

160

170

180

200

High Strength Structural Nuts (Metric)

Hardened & Tempered Washers (Type A) Metric

Metric

Page 39: Central Motors - Unbrako pricelist

Unbrako

32

Stud Bolt With 2 Heavy Hex Nuts

350055

350056

350057

350058

350059

350060

350061

350062

350063

350064

350065

350066

350067

350068

350069

350070

350071

350072

350073

350074

350075

350076

350077

12,659

13,432

14,289

15,062

15,850

16,661

17,480

18,268

19,080

19,898

20,373

21,184

22,003

22,784

23,603

24,375

25,195

26,013

26,794

27,605

28,433

29,205

30,023

350078

350079

350080

350081

350082

350083

350084

350085

350086

350087

350088

350089

350090

350091

350092

350093

350094

350095

350096

350097

350098

350099

350100

17,725

18,383

18,812

19,823

20,794

21,766

22,777

23,756

24,728

25,745

26,641

27,644

28,624

29,634

30,613

31,624

32,596

33,613

34,585

35,604

36,575

37,579

39,568

350001

350002

350003

350004

350005

350006

350007

350008

350009

350010

350011

350012

3,153

3,460

3,734

4,002

4,278

4,546

4,822

5,136

5,526

5,802

6,070

6,384

350013

350014

350015

350016

350017

350018

350019

350020

350021

350022

350023

350024

350025

350026

350027

350028

350029

350030

350031

350032

6,070

6,575

7,079

7,592

8,173

8,640

9,184

9,689

10,203

10,707

11,326

11,831

12,375

12,888

13,432

13,937

14,442

14,986

15,497

16,003

350033

350034

350035

350036

350037

350038

350039

350040

350041

350042

350043

350044

350045

350046

350047

350048

350049

350050

350051

350052

350053

350054

9,222

9,889

10,554

11,211

11,831

12,498

13,126

13,784

14,366

15,024

15,658

16,317

16,937

17,595

18,223

18,850

19,507

20,128

20,794

21,421

22,041

22,699

LengthInternational

Part No.Price/

100 Pcs International

Part No.Price/

100 Pcs International

Part No.Price/

100 Pcs International

Part No.Price/

100 Pcs International

Part No.Price/

100 Pcs

M12 M16 M18 M20 M22

60

70

80

90

100

110

120

130

140

150

160

170

180

190

200

210

220

230

240

250

260

270

280

290

300

320

Metric

Material Specifications : Stud Bolts to ASTM A193 Gr. B7

Heavy Hex Nuts conforming to ASTM A194 Gr. 2H

Page 40: Central Motors - Unbrako pricelist

33

Stud Bolt With 2 Heavy Hex Nuts

71,941

74,696

77,451

80,206

82,961

85,258

88,013

90,767

93,538

96,355

98,573

101,329

104,084

106,687

109,442

113,421

116,024

121,533

127,044

132,555

137,759

142,962

148,473

153,524

159,188

164,545

169,902

350208

350209

350210

350211

350212

350213

350214

350215

350216

350217

350218

350219

350220

350221

350222

350223

350224

350225

350226

350227

350228

350229

350230

350231

350232

350233

350234

LengthInternational

Part No.Price/

100 Pcs International

Part No.Price/

100 Pcs International

Part No.Price/

100 Pcs International

Part No.Price/

100 Pcs International

Part No.Price/

100 Pcs

M24 M27 M30 M33 M36

90

100

110

120

130

140

150

160

170

180

190

200

210

220

230

240

250

260

270

280

290

300

320

340

360

380

400

420

440

460

480

500

350101

350102

350103

350104

350105

350106

350107

350108

350109

350110

350111

350112

350113

350114

350115

350116

350117

350118

350119

350120

350121

350122

350123

350124

350125

19,637

21,108

22,661

23,442

24,613

25,783

26,947

28,119

29,288

30,414

31,585

32,711

34,424

35,604

36,766

37,929

39,100

40,272

41,443

42,605

43,777

44,826

47,244

49,578

51,919

31,157

32,987

34,508

35,986

37,502

38,976

40,502

42,062

43,624

45,177

46,738

48,293

49,463

50,986

52,501

53,987

55,502

56,986

58,456

59,978

62,979

65,979

68,987

71,979

74,979

350126

350127

350128

350129

350130

350131

350132

350133

350134

350135

350136

350137

350138

350139

350140

350141

350142

350143

350144

350145

350146

350147

350148

350149

350150

41,671

43,225

45,177

47,129

49,073

50,626

52,578

54,530

56,090

58,035

59,978

61,931

63,881

66,997

68,940

70,885

72,807

74,788

76,342

80,237

83,742

87,247

91,142

94,655

98,153

102,049

105,554

109,449

112,962

350151

350152

350153

350154

350155

350156

350157

350158

350159

350160

350161

350162

350163

350164

350165

350166

350167

350168

350169

350170

350171

350172

350173

350174

350175

350176

350177

350178

350179

54,798

57,093

59,542

61,838

64,134

66,584

68,420

70,869

73,165

75,614

78,216

81,124

83,267

85,716

87,247

89,544

91,839

93,829

98,420

103,165

107,451

112,196

116,482

121,227

125,513

130,105

134,391

139,289

350180

350181

350182

350183

350184

350185

350186

350187

350188

350189

350190

350191

350192

350193

350194

350195

350196

350197

350198

350199

350200

350201

350202

350203

350204

350205

350206

350207

Metric

Material Specifications : Stud Bolts to ASTM A193 Gr. B7

Heavy Hex Nuts conforming to ASTM A194 Gr. 2H

Page 41: Central Motors - Unbrako pricelist

Unbrako

34

Stud Bolt With 2 Heavy Hex Nuts

LengthInternational

Part No.Price/

100 Pcs International

Part No.Price/

100 Pcs International

Part No.Price/

100 Pcs International

Part No.Price/

100 Pcs International

Part No.Price/

100 Pcs

M39 M42 M45 M48 M52

International Part No.

Price/100 Pcs

M56

150

160

170

180

190

200

210

220

230

240

250

260

270

280

290

300

320

340

360

380

400

420

440

460

480

500

92,298

95,359

98,728

101,635

104,696

108,217

111,279

114,493

117,707

120,768

124,289

127,350

130,564

133,625

140,361

143,422

148,014

154,137

160,106

166,841

172,963

179,086

185,515

191,637

197,913

205,107

350235

350236

350237

350238

350239

350240

350241

350242

350243

350244

350245

350246

350247

350248

350249

350250

350251

350252

350253

350254

350255

350256

350257

350258

350259

350260

117,707

121,533

125,513

129,341

133,320

137,147

141,141

144,892

148,794

152,307

156,126

160,106

164,100

167,920

171,754

179,561

187,045

192,862

198,679

206,026

213,526

220,567

228,067

235,444

243,015

350261

350262

350263

350264

350265

350266

350267

350268

350269

350270

350271

350272

350273

350274

350275

350276

350277

350278

350279

350280

350281

350282

350283

350284

350285

147,386

151,542

155,958

160,259

164,851

168,907

173,927

178,167

182,453

187,045

191,637

196,689

201,281

206,638

215,669

222,097

230,822

239,700

245,670

253,476

261,282

269,089

277,048

284,701

350286

350287

350288

350289

350290

350291

350292

350293

350294

350295

350296

350297

350298

350299

350300

350301

350302

350303

350304

350305

350306

350307

350308

350309

350310

350311

350312

350313

350314

350315

350316

350317

350318

350319

350320

350321

350322

350323

350324

350325

350326

350327

350328

350329

350330

350331

350332

181,994

187,045

192,097

197,301

202,199

207,404

212,454

217,505

222,710

227,761

232,812

237,941

242,915

252,863

263,578

273,680

283,782

293,885

304,141

314,242

324,498

334,601

344,702

350333

350334

350335

350336

350337

350338

350339

350340

350341

350342

350343

350344

350345

350346

350347

350348

350349

350350

350351

350352

350353

350354

220,872

226,536

232,200

238,781

244,292

250,568

256,537

262,660

268,476

274,752

280,721

286,843

299,089

309,957

322,355

334,294

346,386

350,978

362,764

374,397

386,030

397,969

269,700

276,283

283,170

289,599

296,334

303,069

309,344

316,080

322,967

329,396

342,254

355,723

368,887

382,204

395,520

408,378

421,541

435,011

448,175

461,337

350355

350356

350357

350358

350359

350360

350361

350362

350363

350364

350365

350366

350367

350368

350369

350370

350371

350372

350373

350374

Metric

Material Specifications : Stud Bolts to ASTM A193 Gr. B7

Heavy Hex Nuts conforming to ASTM A194 Gr. 2H

Page 42: Central Motors - Unbrako pricelist

35

Stud Bolt With 2 Heavy Hex Nuts

International Part No.

Price/100 Pcs

International Part No.

Price/100 Pcs

International Part No.

Price/100 Pcs

International Part No.

Price/100 Pcs

5/8 3/4 7/8 1

7,714

8,189

8,656

9,123

9,590

10,057

10,524

10,997

11,457

12,597

13,064

13,570

14,542

15,054

15,520

16,034

550322

550323

550324

550325

550326

550327

550328

550329

550330

550331

550332

550333

550334

550335

550336

550337

550338

550339

550340

550341

550342

550343

550344

550345

550346

550347

550348

550349

550350

550351

550352

12,636

13,370

14,120

14,863

15,583

16,332

17,067

17,816

19,302

19,806

20,541

21,949

22,654

23,397

24,093

19,484

20,510

21,521

22,539

23,565

24,567

25,562

27,552

28,624

29,388

31,379

32,405

33,368

34,364

36,354

550353

550354

550355

550356

550357

550358

550359

550360

550361

550362

550363

550364

550365

550366

550367

550368

550369

550370

550371

550372

550373

550374

550375

550376

550377

550378

550379

550380

550381

550382

550383

550384

27,996

29,312

30,643

31,991

33,322

34,623

37,272

38,603

40,134

42,123

43,669

45,232

45,997

48,752

49,930

51,490

52,654

LengthInternational

Part No.Price/

100 Pcs

1/ 2

550309

550310

550311

550312

550313

550314

550315

550316

550317

550318

550319

550320

550321

4,210

4,516

4,830

5,136

5,450

5,764

6,077

6,391

6,696

7,010

7,638

7,952

8,258

2.1/4

2.3/4

3

3.1/2

4

4.1/2

4.3/4

5

5.1/2

6

61/2

7

71/2

8

81/2

9

9-1/2

10

10-1/2

11

11-1/2

Inch

Material Specifications : Stud Bolts to ASTM A193 Gr. B7

Heavy Hex Nuts conforming to ASTM A194 Gr. 2H

Page 43: Central Motors - Unbrako pricelist

Stud Bolt With 2 Heavy Hex Nuts

LengthInternational

Part No.Price/

100 Pcs International

Part No.Price/

100 Pcs International

Part No.Price/

100 Pcs

1-1/8 1-1/4 1-1/2

4-1/2

4-3/4

5

5-1/2

6

6-1/2

7

7-1/2

8

8-1/2

9

9-1/2

10

10-1/2

11

11-1/2

12

12-1/2

13

13-1/2

14

14-1/2

15

15-1/2

16

16-1/2

17

17-1/2

18

18-1/2

19

19-1/2

20

20-1/2

21

22

550385

550386

550387

550388

550389

550390

550391

550392

550393

550394

550395

550396

550397

550398

550399

550400

550401

550402

550403

550404

550405

39,782

41,328

43,287

44,879

46,378

49,900

51,490

53,021

56,558

58,119

59,695

61,640

64,777

66,691

68,251

69,798

73,333

74,872

76,679

80,191

81,905

550406

550407

550408

550409

550410

550411

550412

550413

550414

550415

550416

550417

550418

550419

550420

550421

550422

550423

550424

550425

550426

550427

550428

53,420

55,394

57,339

59,695

63,981

65,926

67,885

72,171

74,528

76,074

78,415

82,716

84,661

86,956

88,946

93,064

95,206

97,334

101,635

103,778

105,921

108,064

112,349

550429

550430

550431

550432

550433

550434

550435

550436

550437

550438

550439

550440

550441

550442

550443

550444

550445

550446

550447

550448

550449

550450

550451

550452

550453

550454

550455

550456

550457

91,156

94,136

100,395

103,517

107,146

113,268

116,329

119,391

122,835

129,111

132,172

134,376

136,228

142,350

145,412

148,473

154,749

158,040

161,101

164,163

170,285

173,269

176,331

179,239

185,515

188,882

192,097

198,220

201,281

Unbrako

36

International Part No.

Price/100 Pcs

1-5/8

550458

550459

550460

550461

550462

550463

550464

550465

550466

550467

550468

550469

550470

550471

550472

550473

550474

550475

550476

550477

550478

550479

550480

550481

550482

550483

550484

550485

550486

550487

550488

550489

112,503

119,774

123,371

127,044

134,238

137,759

141,739

145,412

152,300

156,126

159,494

163,168

170,974

174,647

178,780

185,668

189,801

193,474

197,301

204,188

208,015

211,536

215,210

222,710

226,536

229,903

237,557

241,231

244,904

248,577

255,619

263,272

Inch

Material Specifications : Stud Bolts to ASTM A193 Gr. B7

Heavy Hex Nuts conforming to ASTM A194 Gr. 2H

Page 44: Central Motors - Unbrako pricelist

37

Stud Bolt with 2 Heavy Hex Nuts

International Part No.

Price/100 Pcs

International Part No.

Price/100 Pcs

International Part No.

Price/100 Pcs

International Part No.

Price/100 Pcs

1-3/4 1-7/8 2 2-1/4

6-1/2

7

7-1/2

8

8-1/2

9

9-1/2

10

10-1/2

11

11-1/2

12

12-1/2

13

13-1/2

14

14-1/2

15

15-1/2

16

16-1/2

17

17-1/2

18

18-1/2

19

19-1/2

20

20-1/2

21

22

23

24

25

26

27

Length

550490

550491

550492

550493

550494

550495

550496

550497

550498

550499

550500

550501

550502

550503

550504

550505

550506

550507

550508

550509

550510

550511

550512

550513

550514

550515

550516

550517

550518

550519

550520

145,412

150,004

154,137

162,708

166,841

171,433

175,719

184,597

188,882

193,245

197,462

206,324

210,465

214,903

223,169

227,386

231,618

235,950

244,483

248,761

253,062

257,608

265,606

269,133

274,216

283,737

287,915

292,324

296,411

305,058

313,660

550521

550522

550523

550524

550525

550526

550527

550528

550529

550530

550531

550532

550533

550534

550535

550536

550537

550538

550539

550540

550541

550542

550543

550544

550545

550546

550547

550548

550549

550550

550551

550552

550553

170,361

175,030

180,296

190,259

195,083

200,133

205,107

214,827

219,802

224,394

229,598

239,393

244,292

251,870

259,446

264,604

269,394

273,986

285,007

289,752

294,651

299,549

309,497

314,549

319,600

329,396

334,448

339,804

344,702

354,346

364,601

379,601

389,397

550554

550555

550556

550557

550558

550559

550560

550561

550562

550563

550564

550565

550566

550567

550568

550569

550570

550571

550572

550573

550574

550575

550576

550577

550578

550579

550580

550581

550582

550583

550584

231,128

236,486

242,302

253,782

259,599

264,955

270,925

282,330

288,145

293,885

304,905

310,722

316,233

322,048

333,682

339,193

344,702

350,519

361,616

367,356

373,020

384,193

390,010

395,061

401,030

412,511

424,296

440,980

452,614

469,910

480,624

550585

550586

550587

550588

550589

550590

550591

550592

550593

550594

550595

550596

550597

550598

550599

550600

550601

550602

550603

550604

550605

550606

550607

550608

550609

550610

550611

550612

550613

550614

550615

316,233

323,579

338,274

345,927

353,274

360,622

375,468

382,815

390,316

405,163

412,894

420,010

427,357

439,297

446,491

453,991

461,032

476,032

483,227

490,420

505,115

512,248

519,349

526,697

541,544

555,932

572,004

592,592

613,944

628,638

650,526

Inch

Page 45: Central Motors - Unbrako pricelist

Unbrako

38

Heavy Hex Nut (ASTM A194 GR2H)

Heavy Hex Nuts (ASTM A194 GR2H)

Size

M16

M18

M20

M22

M24

M27

M30

M33

M36

M39

M42

M45

M48

M52

M56

270001

270002

270003

270004

270005

270006

270007

270008

270009

270010

270011

270012

270013

270014

270015

1,609

2,399

3,112

3,810

5,336

7,993

11,262

14,494

19,848

25,320

32,916

40,384

49,271

61,388

71,470

150

100

75

50

50

25

25

20

10

10

8

5

5

4

4

International Part No. Price\100 Pcs. Box Quantity

1/2”

9/16”

5/8”

3/4”

7/8”

1”

1-1/8”

1-1/4”

1-3/8”

1-1/2”

1-5/8”

1-3/4”

1-7/8”

2”

Size International Part No. Price\100 Pcs. Box Quantity

270016

270017

270018

270019

270020

270021

270022

270023

270024

270025

270026

270027

270028

270029

1,153

1,427

2,087

3,401

5,222

7,468

10,406

14,414

18,700

24,029

29,724

37,430

44,225

90,471

200

175

125

75

50

30

25

15

15

10

8

6

6

5

Metric

Inch

Page 46: Central Motors - Unbrako pricelist

39

Hex Nuts

Size (mm)

M6 X 1

M8 X 1.25

M10 X 1.5

M12 X 1.75

(M12) X 1.5

M12 X 1.75

(M14) X 1.5

(M14) X 2

M16 X 2

M16 X 2

(M18) X1.5

(M18) X 2.5

M20X 1.5M

M20 X 2.5

(M22) X 2.5

M24 X 3

(M27) X 3

M30 X 3.5

(M33) X 3.5

M36 X 4

M39 X 4

M42 X 4.5

M45 x 4.5

M48 x 5

M52 x 5

M56 x 6

M60 X 6

M64 x 6

M72 X 6

8

8

8

8

10

10

10

10

8

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

550303

550304

550305

550306

170623

170622

170625

170626

550307

170627

170629

170630

170631

170632

170633

170634

170635

170636

170637

170638

170639

170640

170641

170642

170643

170644

550301

170645

550302

129

177

359

552

928

928

1,077

1,077

1,100

1,409

2,012

2,012

2,697

2,710

3,115

4,659

7,523

10,291

14,158

19,238

24,928

30,619

36,580

44,070

54,924

70,993

133,110

141,984

241,500

500

200

200

200

200

200

100

100

100

100

100

100

50

50

50

50

25

25

10

10

10

10

10

10

4

4

3

3

2

9000

2400

2400

1600

2400

2400

800

800

800

800

600

600

300

300

200

200

150

150

80

80

40

40

40

40

16

16

12

12

8

GradeInternational

Part NoPRICE

Pcs. Per Box

Pcs. PerCartoon

1. Specifications :

2. Threads :

3. Material Mechanical Properties :

4. Note :

For Nuts with Metric Threads IS : 1364, ISO 4032

ISO Metric 6H as per is : 4218, iso 261, iso 965.

Property Class as tabulated as per IS : 1367, ISO 898, Part-II.

Size in brackets are non-preferred standards.

Page 47: Central Motors - Unbrako pricelist

Unbrako

40

Hex Nuts

1. Specifications :

2. Threads :

3. Material Mechanical Properties :

For Nuts with UNC Threads : (ANSI B 18.2.2).

Unified Coarse, 2B As Per ANSI B1.1.

Grade as tabulated as per SAE J 995.

Size (mm) International Part No

GradePrice/

100 PcsPcs. PerCartoon

Pcs. Per Box

1/4

5/16

3/8

7/16

1/2

5/8

3/4

7/8

1

1-1/8

1-1/4

1-3/8

1-1/2

8

8

8

8

8

8

8

8

8

8

8

8

8

142

196

297

678

678

1409

2485

3350

5000

7434

10016

13466

17398

170646

170647

170648

170658

170649

170650

170651

170652

170653

170654

170655

170656

170657

500

500

200

200

200

200

50

50

50

25

25

25

10

9000

9000

2400

1600

1600

1600

400

200

200

150

100

100

40

8

RAB KON

U

Nylock Nut (Din 982, ISO 7040 Grade-8) Blue Ring

Pcs. Per Cartoon

Pcs. Per Box

9000

2400

2400

2400

2400

800

800

800

300

300

(Duly Mechanical White Zinc Plated)

Size (mm) International Part No

Price/100 Pcs

146

263

579

829

880

1,349

1,669

1,786

3,541

3,789

500

200

200

200

200

100

100

100

50

50

M6

M8

M10

M12

M12X1.5

M14

M16

M16x1.5

M20M

20x1.5

630448

630449

630450

630451

630452

630453

630454

630455

630456

630457

Page 48: Central Motors - Unbrako pricelist

41

Nylock Nut (Din 982, ISO 7040 Grade-10) Blue Ring (Duly Mechanical White Zinc Plated)

10

RAB KON

U

Size (mm) International Part No

Price/100 Pcs

Pcs. Per Cartoon

Pcs. Per Box

200

200

100

100

50

50

2400

2400

800

800

300

200

M10

M12

M16

M16X1.5

M20

M24

669

966

1,998

2,079

3,756

8,360

630458

630459

630460

630461

630462

630463

8

RAB KON

U

Nylock Nut (Din 985, ISO 10511 Grade-8) Blue Ring

(Duly Mechanical White Zinc Plated)

Pcs. Per Cartoon

Pcs. Per Box

9000

2400

2400

2400

2400

800

800

800

300

300

Size (mm) International Part No

Price/100 Pcs

101

201

437

640

686

1,051

1,353

1,448

3,053

3,266

500

200

200

200

200

100

100

100

50

50

M6

M8

M10

M12

M12X1.5

M14

M16

M16x1.5

M20M

20x1.5

290001

290002

290003

290004

290005

290006

560957

630379

630380

630381

Nylock Nut (Din 985, ISO 10511 Grade-10) Blue Ring (Duly Mechanical White Zinc Plated)

10

RAB KON

U

Size (mm) International Part No

Price/100 Pcs

Pcs. Per Cartoon

Pcs. Per Box

200

200

100

100

50

50

2400

2400

800

800

300

200

M10

M12

M16

M16X1.5

M20

M24

517

764

1,628

1,683

3,243

6,592

630305

630306

290007

290008

290009

290010

Page 49: Central Motors - Unbrako pricelist

Unbrako

42

Spring Washer - Square Section

Spring Washer - Flat Section

Unbrako Hardened Washer For 10.9 Bolts

1. Specifications : Generally conforming to 300HV - 370HV. For Unbrako Hardened Washer 10.9 Bolts

Size(mm)

3MM

4MM

5MM

6MM

8MM

10MM

12MM

14MM

16MM

International Part No.

171758

171759

171760

171761

171762

171763

171764

171765

171766

Pcs/Box

2000

2000

2000

1000

1000

500

500

200

100

Pcs/Carton

160000

90000

48000

30000

24000

12000

7000

4800

3000

Price/100 Pcs

12

14

17

19

32

57

67

112

169

Size(mm)

International Part No.

18MM

20MM

22MM

24MM

27MM

30MM

33MM

36MM

39MM

171767

171768

171769

171770

171771

171772

171773

171774

171775

Pcs/Box

100

100

50

50

50

50

25

25

25

Pcs/Carton

2400

1500

1000

1200

700

500

400

350

250

Price/100 Pcs

187

345

386

514

589

911

1,073

1,561

1,688

Size(mm)

International Part No.

Size(mm)

International Part No.

3MM

4MM

5MM

6MM

8MM

10MM

12MM

14MM

16MM

171776

171777

171778

171779

171780

171781

171782

171783

171784

Pcs/Box

2000

2000

2000

1000

1000

500

500

200

100

Pcs/Carton

140000

120000

60000

32000

14000

7000

5000

3200

3000

Price/100 Pcs

12

14

18

32

51

74

111

171

259

18MM

20MM

22MM

24MM

27MM

30MM

33MM

36MM

39MM

171785

171786

171787

171788

171789

171790

171791

171792

171793

Pcs/Box

100

100

50

50

50

50

25

25

25

Pcs/Carton

1800

1400

800

700

700

500

200

350

250

Price/100 Pcs

300

429

486

726

809

1,307

2,089

2,188

2,297

M12

M16

M20

M24

551111

551112

551113

551114

Size (mm) International Part No.

500

200

100

100

Pcs/Box

4000

1600

800

600

Pcs/Carton

414

725

1,099

1,550

Price 100 Pcs

1. Specification: Generally conforming to DIN 127, IS 3063 & BS 4464

Page 50: Central Motors - Unbrako pricelist

Auto Torque Indicator Washer (ATI)

For 8.8S Bolt Assembly (Duly Mechanical Zinc Plated)

International Part No.

Size

M16

M20

M22

M24

M27

630330

370002

370003

370004

370005

Pcs/Box

100

100

50

50

50

Pcs/Carton

1200

800

400

400

300

Price/100 Pcs

2,501

4,470

5,411

7,247

9,176

RAB KONU

8.8

M2

7

13 0060

(Duly Mechanical Zinc Plated)

International Part No.

Size

M24

M27

M30

M36

370006

370007

370008

370009

Pcs/Box

50

50

25

25

Pcs/Carton

400

300

200

150

Price/100 Pcs

7,247

9,176

13,385

19,226

1. Specification :

Note :

Generally conforming to BS-EN-14399-09

Separate catalogue can be provided on request.

RAB KONU

M2

7

13 0060

9.0

1

Auto Torque Indicator Washer (ATI)

For 10.9S Bolt Assembly

BN

U

6

RAKO

International Part No.

Price100 Pcs

Pcs/Box Pcs/CartonSize

Hexagon Weld Nut

500

200

200

200

9000

2400

2400

1600

13600

136001

136002

136003

4 M6

M8

M10

M12

123

214

392

558

43

1. Specification : Generally conforming to DIN 929

Page 51: Central Motors - Unbrako pricelist

Unbrako

44

Hexagon Wrenches Sets

1. Specifications :

A. Inch Series : B. Metric Series :

2. Material :

3. Mechanical Properties :

BS : 2470

UNBRAKO High Grade Alloy Steel.

Hardness : HRC 47 (Min).

IS : 3082, DIN 911.

Length Price/100 Pcs

Box Quantity

InternationalPart No

1/16

5/64

3/32

1/8

5/32

3/16

7/32

1/4

5/16

3/8

1/2

9/16

5/8

3/4

108468

110164

110180

110213

110246

115915

115948

115981

115997

116013

116046

116063

116080

116096

100

100

100

100

100

100

50

50

25

25

10

10

10

10

1,024

1,129

1,129

1,129

1,338

1,731

2,355

3,411

5,667

8,383

19,342

24,748

36,136

58,435

Length Price/100 Pcs

Box Quantity

InternationalPart No

1.5

2

2.5

3

4

5

6

8

10

12

14

17

19

22

24

27

32

125648

122263

122270

121093

119953

122245

121066

115557

120859

120806

111100

138487

111133

402603

402604

402605

402606

1,024

1,024

1,024

1,129

1,772

2,162

3,077

5,795

9,671

18,194

26,761

42,325

58,406

92,056

123,772

208,371

366,444

100

100

100

100

100

100

50

50

25

25

25

10

10

5

5

2

2

Standard

(Metric)

1.5mm, 2mm, 2.5mm, 3mm, 4mm,

5mm, 6mm, 8mm, 10mm, Set of 9

Sets Wrenches Box Set Price Box

STANDARD (METRIC)

Part No

318402616 50

Standard

(Inch)

1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”

7/32”, 1/4”, 5/16”, 3/8”, Set of 10

Sets Wrenches Box Set Price Box

STANDARD (INCH)

Part No

334402615 50

Page 52: Central Motors - Unbrako pricelist

45

Dowel Pins

40

40

40

40

40

40

40

40

115010

115011

115012

115015

407127

402128

115017

402132

402133

115021

402134

115022

115024

407128

402137

115026

402138

406347

115028

115031

40

40

40

40

40

40

40

40

40

40

40

40

2,035

2,115

2,171

2,171

2,171

2,171

2,500

2,500

2,171

2,429

2,429

2,429

2,687

2,687

2,687

2,852

2,852

3,016

3,176

3,176

40

40

40

40

40

40

407831

407832

407833

407835

407836

407837

1,984

1,984

1,984

1,984

1,984

1,984

M2

LengthPrice/

100 PcsInternational

Part No

Box Quantity

M3

Box Quantity

Price/100 Pcs

InternationalPart No

8

10

12

14

16

18

20

24

28

30

32

36

40

115001

115002

115003

402118

115004

402120

115007

402121

406345

402124

40

40

40

40

40

40

40

40

40

40

1,984

1,984

1,984

1,984

1,984

1,984

2,171

2,171

2,336

2,500

M4

LengthPrice/

100 PcsInternational

Part NoBox

Quantity

M5

Box Quantity

Price/100 Pcs

InternationalPart No

10

12

14

16

18

20

24

28

30

32

36

40

50

Metric

Unbrako dowel pins are through hardened and precision ground from nominal to 0.0002” over size on Inch sizes and a surface finish of

0.15 micrometers max. On both Metric and Inch products.

Genuine Unbrako Dowel Pins should only be supplied against these List Prices.

Unbrako advise that correct tools should be used for the application.

Safety goggles should be worn for your security and protection.

CAUTION:

1. Specifications : Generally conforming to DIN : 6325.

Unbrako High Grade Alloy Steel.2. Material :

Page 53: Central Motors - Unbrako pricelist

Unbrako

46

Dowel Pins Metric

402141

115032

402143

115034

115037

402145

115038

402146

406348

115043

115046

115047

115049

406349

402150

115053

402151

406350

115055

115056

115057

402153

115058

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

40

4,671

4,891

5,323

5,323

5,323

5,718

5,872

6,036

6,519

7,227

7,692

Price/100 Pcs

InternationalPart No

Box Quantity

InternationalPart No

Price/100 Pcs

Box Quantity

2,688

2,709

2,729

2,729

3,180

3,527

3,532

3,532

3,532

3,668

3,992

4,671

406218

406220

406225

406226

406227

20

20

20

20

20

18,099

18,099

26,724

30,439

31,522

M10

International Part No.

Price/100 Pcs

Box Quantity

M6

International Part No.

Price/100 Pcs

Box Quantity

Length

M8

International Part No.

Price/100 Pcs

Box Quantity

12

16

18

20

24

28

30

32

36

40

45

50

55

60

70

90

100

115063

406351

115066

406352

115070

115071

402161

402163

402164

402167

402169

40

40

40

40

40

40

40

40

40

40

40

5,703

6,031

7,007

7,692

8,015

8,723

9,047

10,084

11,059

13,235

14,098

M12 M16

Length

24

30

32

36

40

50

60

70

80

90

100

406353

402174

406354

402178

402180

402182

402183

402184

402186

40

40

40

40

40

40

40

40

40

7,692

8,888

9,413

10,379

12,902

18,263

18,263

20,758

25,814

Unbrako dowel pins are through hardened and precision ground from nominal to 0.0002” over size on Inch sizes and a surface finish of

0.15 micrometers max. On both Metric and Inch products.

Genuine Unbrako Dowel Pins should only be supplied against these List Prices.

Unbrako advise that correct tools should be used for the application. Safety goggles should be worn for your security and

protection.

CAUTION:

1. Specifications :

2. Material :

Generally conforming to DIN : 6325.

Unbrako High Grade Alloy Steel.

Page 54: Central Motors - Unbrako pricelist

47

High Tensile Track Shoe Bolts & Square Nuts

130.32.11212

130.32.11220

205.32.51210

01803.01824

150.32.11210

113CT51096

150.32.21311

207.32.11350

--------

176.32.11210

178.32.11220

195.32.11210

195.32.11221

M16 x 1.5 x 57

M16 x 1.5

M18 x 1.5 x 57

M18 x 1.5

M19 x 1.5 x 65

M19 x 1.5 x 62

M19 x 1.5

M20 x 1.5 x 63

M20 x 1.5

M24 x 1.5 x 76.2

M24 x 1.5

M27 x 1.5 x 82

M 27 x 1.5

T.S. Bolt

T.S. Sq. Nut

T.S. Bolt

T.S. Sq. Nut

T.S. Bolt

T.S. Bolt

T.S. Sq. Nut

T.S. Bolt

T.S. Sq. Nut

T.S. Bolt

T.S. Sq. Nut

T.S. Bolt

T.S. Sq. Nut

D50, D50A 15

D50, D50A 15

PC220

PC220

D80, D80A 12

D80, D80A 12

D80, D80A 12

PC300

PC300

D155

D155

D355

D355

6,911

3,499

8,506

3,999

10,633

10,633

4,166

11,873

4,499

18,962

7,165

24,810

10,331

330001

330002

330003

330004

330005

330006

330007

330008

550308

330009

330010

330011

330012

Suitable for BEML (KOMATSU) EARTHMOVERS

SUITABLE FOR L & T POCLAIN EARTHMOVERS

W 00 330.71

K 01345.36

U 02330-77

Z 02345-07

5/8” x2.1/4”

5/8” UNF

7/8” UNFx2.66”

7/8” UNF

UNF T.S. Bolt

T.S. Sq. Nut

T.S. Bolt

T.S. Sq. Nut

90 CK

90 CK

300 CK

300 CK

6,911

3,499

14,532

6,165

1. Specification :

2. Mechanical Properties :

Forged from High Grade Alloy Steel.

Track Shoe Bolt Grade 12.9, Square Nut HRC 32-38

330017

330018

330014

330015

Equivalent O.E. Part No.

(For Ref. Only)Size Description Model

International Part No.

Price in Rs.Per 100 Pcs

Equivalent O.E. Part No.

(For Ref. Only)Size Description Model

International Part No.

Price in Rs.Per 100 Pcs

Page 55: Central Motors - Unbrako pricelist

Unbrako

48

SUITABLE FOR HM-TEREX & HM DEMAG EARTHMOVERS

1. Specification :

2. Mechanical Properties :

Forged from High Grade Alloy Steel.

Track Shoe Bolt Grade 12.9, Square Nut HRC 32-38

Suitable for CATERPILLAR EARTHMOVERS

High Tensile Track Shoe Bolts & Square Nuts

7H 3597

5M 8756

1M 1408

7 H3598

1S1860

7H 3599

2S2140

9M 7445

1S6421

5/8” UNFx2.3/32”

5/8” UNFx2.1/4”

5/8” UNF

3/4” UNF x 2.3/8”

3/4” UNF

7/8” UNF x 2.66”

7/8” UNF

1” UNF x 2.94”

1” UNS

T.S. Bolt

T.S. Bolt

T.S. Sq. Nut

T.S. Bolt

T.S. Sq. Nut

T.S. Bolt

T.S. Sq. Nut

T.S. Bolt

T.S. Sq. Nut

D4, D5

D4, D5

D4, D5

D6, D7

D6, D7

D8

D8

D8

DS9

6,557

6,911

3,499

10,456

4,333

14,532

6,165

20,734

8,498

Equivalent O.E. Part No.

(For Ref. Only)

01801340

06400140

06327940

06400240

3/4”xUNFx2.3/4”

3/4” UNF

7/8” UNFx3.11/32”

7/8” UNF

T.S. Bolt

T.S. Sq. Nut

T.S. Bolt

T.S. Sq. Nut

H31, H36, H41

H36

H51, H55

H51

11,650

4,333

17,190

6,165

330016

330017

330018

330019

330020

330014

330015

330021

330022

630419

330020

330023

330015

Equivalent O.E. Part No.

(For Ref. Only)Size Description Model

International Part No.

Price in Rs.Per 100 Pcs

Size Description Model International

Part No.Price in Rs.Per 100 Pcs

Page 56: Central Motors - Unbrako pricelist

49

Drop In Anchors

Drop In Anchors Setting Tools

Code

ANCHT06

ANCHT08

ANCHT10

ANCHT12

SIZE D1 D2 L1 L2

6

10

12

16

9.900

12.700

15.875

19.050

4.700

7.950

9.525

12.700

97.790

114.300

127.000

139.700

17.000

25.400

31.750

38.100

Main Technical Index

Design tensile breaking strength

Design breaking shearing force

Safety Tensile breaking strength

Safety breaking shearing force

M6 x 25 M8 x 30 M10 x 40 M12 x 50 M16 x 60

3.3

4.1

2.4

2.9

5.3

6.7

3.8

3.9

7.0

7.8

5.0

5.6

11.9

14.3

8.5

10.2

16.1

18.1

11.5

12.9

Code

DANCH0625ZP

DANCH0830ZP

DANCH1040ZP

DANCH1250ZP

DANCH1660ZP

Size (A) External Diameter (B)

Thread Length (L1)

BodyLength (L)

Price Per 100 Nos.

InternationalPart No.

M6

M8

M10

M12

M16

10

13

15

20

25

25

30

40

50

60

8.0

10.0

12.0

16.0

20.0

3600

1800

1000

600

300

555

725

1,129

2,673

4,505

551654

551655

551656

630269

551657

BoxQuantity

CartoonQuantity

100

100

50

50

25

Value Are In KN

Drop In Anchors

Page 57: Central Motors - Unbrako pricelist

Unbrako

50

Comparison of Different Strength Grades

Page 58: Central Motors - Unbrako pricelist

51

How Identify Unbrako Products

Socket Head Cap Screw1/8” to 3/16”

Socket Head Cap Screw3/16” tp 3/8”

Socket Head Cap Screw1/2” to 1”

Socket Counter Sunk Cap Screw 1/4” to 5/6”

Socket Set Screw 1.8” to 3/4” (1/8 to 3/4”)

Hexagon Wrenches 1/16” A/F to 1/8

Hexagon Wrenches 5/32” A/F to 3/4” A/F

Hexagon Head Bolts All Sizes

Hexagon Head Bolts All Sizes

Hexagon Nuts All Sizes

Special / Auot OEM Replacement Market

Stud with Two Nuts 1/2 to 2-1/4

Socket Head Cap ScrewM3 to M5

Socket Head Cap ScrewM6 to M24

Socket Head Cap ScrewM27 to M42

Socket Counter Sunk Cap Screw M3 to M16

Socket Set Screw 1.5 A/F

Hexagon Wrenches 1.5 A/F to 3 A/F

Hexagon Wrenches 4 A/F to 32 A/F

Hexagon Head Bolts M4 to M42

Hexagon NutM12 to M42

High Strength Structural Bolts

M16 To M30

High Strength Structural Bolts

M16 To M30

Washers For High Strength Structural Bolts

Special / Auto OEMReplacement Market

Bolts & Nuts

Hex Head Bolt/ScrewsM16 to M36 SS-304/316

Stud With Two NUtsM12 to M56

Page 59: Central Motors - Unbrako pricelist

Unbrako

INTRODUCING THE FIRST EVER

Fastener Smartphone App

The Unbrako Fastener Selector Guide App is available for download at the App Store.

Best of All, this App is absolutely So why wait? FREE! Download it NOW!

www.unbrako.comwww.unbrako.com

Page 60: Central Motors - Unbrako pricelist

UNBRAKO (EUROPE)Deepak Fasteners (Shannon) Ltd.Bays 25-30 Shannon Industrial Estate,County Clare, IrelandPh.: +353-61-716-500Fax: +353-61-716-584

UNBRAKO (U.K.)Deepak Fasteners (U.K.) Ltd.12-14 Tower Street, New townBirmingham - B19 3rr, U.K.Ph.: +44-121-333-4610Fax: +44-121-333-4525

UNBRAKO (AUSTRALIA)Deepak Fasteners (Australia) Ltd.67-69 Licola Crescent Dandenong South Victoria 3175, AustraliaPh.: +61-3-98940026Fax: +61-3-98940038

UNBRAKO (INDIA)Deepak Fasteners (India) Ltd.4th Floor, First Mall, The MallLudhiana- 141001 (pb.) IndiaPh.: +91-161-3911111Fax: +91-161-2774400

UNBRAKO (USA)Deepak Fasteners (USA) Ltd.Interfast Miami12400 Sw 134th CourtMiami, Florida 331861-877-669-9024

website: www.unbrako.com / e-mail: [email protected]

ORLD IDE Access

BSI

0045

BSI

ISO/TS 16949:2009ISO 9001:2008


Top Related