www.klaus-union.com
CHEMICALSTANDARD PUMP
SERIES NOV
WITH SHAFT SEALINGACC. TO DIN EN ISO 22858 / 5199
NOV
02 | NOV NOV | 03
CHEMICAL STANDARD PUMPWITH SHAFT SEALING
Here comes more evidence of our product capability: The chemical standard pump type NOV with shaft seal supple-ments our wellproven modular pump series SLM NV with magnet drive. It has been developed for applications in the chemical and petrochemical industries. This pump type is handling clean, coalesced and aggressive liquids. Its major dimensions and its performance range conform to DIN EN 22858 and DIN ISO 5199.
This dimensional interchangeability means that you can easily use them for replacement of standard pump sizes of other manufacturer. Supplementary pump sizes outside the standard are available if required to satisfy higher pumping requirements.
A wide range of materials and available pressure ratings of the pump hydraulic allow for almost universal use of the pump within the chemical and petrochemical industries. Our construction provides for any shaft seals such as me-chanical seals to EN 12756 (DIN 24960) and stuffing box pa-ckings.
The following optional designs are available:E Casing with centerline supportE Construction type with heating: jacketed casing “H1“ and / or stuffing box heating chamber “H2“E Open impellersE InducerE Multi-Stage Design Series GOVE Submerged Design Series TP NO
Performance Range
E Flow Rate: Q = up to 3.500 m³/hE Delivery Head: H = up to 220 m L. C. Higher flow rates and delivery heads upon request
Pressure Ratings/Temperature Range
E Standard Construction: PN 16 at 120 °CE Temperature Range: -120 °C up to 450 °CE Pressure Rating: up to PN 100
Experience Responsibility Passion
Quality Assurance
A major component of the Klaus Union ethos is to ensure highest product quality. Existing quality assurance proce-dures with Klaus Union suppliers are constantly monitored from order placement to goods receipt and final assembly. This quality assurance system, developed on latest techno-logies, complies with the requirements of international re-gulations.
Klaus Union is a DIN EN ISO 9001 certified company
In accordance with TÜV NORD CERT procedures,
KLAUS UNION GmbH & Co. KGBlumenfeldstraße 18, 44795 Bochum&KLAUS UNION Service GmbH & Co. KGBlumenfeldstraße 18, 44795 Bochum
are certified according to DIN EN ISO 9001
04 | NOV
DESIGN DETAILS SERIES NOV
NOV | 05
Please seethe description
on the following page
DesignAccording toDIN EN ISO 22858 /DIN EN ISO 5199
01 01 E Casing Horizontal pump with axially-split casing foot-mounted; Designed to PN 16 at 120 °C.
02 E Impeller Single-stage closed radial impeller; Hydraulic balancing of axial loads via throttle ring and balancing holes; Impeller fixed on the shaft by means of key and impeller screwing with lock washer preventing counterclockwise rotation.
03 E Pump Shaft Designed to DIN EN ISO 5199: optimum dimensions Rigid design to transmit pump power at minimum shaft deflection over the entire operating range.
04 E Anti-Friction Bearing Oil-lubricated anti-friction bearings with large bearing spacing for low-vibration operation; The bearings consist of a cylindrical roller bearing to accept radial loads and paired angular ball bearings to accept axial loads.
05 E Bearing Support Housing the pumps‘ anti-friction bearings and ensuring safe transmission of any loads to the baseplate; Connections for filling and venting of the oil sump and monitoring of the oil level by an oil gauge or a constant level oiler.
02
03
05
04
06 | NOV NOV | 07
PERFORMANCE CURVESSERIES NOV
Klaus UnionQuality is our Success
Performance Curve 50 Hz
Performance Curve 50 Hz
Performance Curve 60 Hz
Performance Curve 60 Hz
14
4000
040-025-125
050-032-125
065-040-125
080-050-125
100-065-125
040-025-160
050-032-160
065-040-160
080-050-160
100-065-160
125-080-160
040-025-200
050-032-200
065-040-200
080-050-200
100-065-200
125-080-200
125-100-200
050-032-250
065-040-250
080-050-250
100-065-250
125-080-250
125-100-250
150-125-250
200-150-250
250-200-250
065-040-315
080-050-315
100-065-315
125-080-315
125-100-315150-125-315
200-150-315
250-200-315
300-250-315
200-150-400
250-200-400
300-250-400
350-300-400
400-400-500( 980 1/min )
400-350-400
200-150-500
250-200-500
300-250-500
350-300-500
400-350-500
2 4 6 8 10 20 40 60 80 100 200 400 600 800 1000 2000
6
8
10
20
40
60
80
100
15
20
50
100
200
300
360
5 10 20 30 5040 100 500 1000 5000 10000 20000
125-100-400150-125-400
Head
[ ft
]
Head
[ m
]
Kennfeld Prospekt NOV 1450 U
1450 1/min
Flowrate[ usgpm ]
Flowrate[ m³/h ]
040-025-125
1 5005
150
050-032-125 065-040-125 080-050-125
100-065-125
040-025-160050-032-160
065-040-160
080-050-160 100-065-160
125-080-160
040-025-200050-032-200
065-040-200
080-050-200
100-065-200
125-080-200
125-100-200
050-032-250
065-040-250
080-050-250
100-065-250
125-080-250
125-100-250
150-125-250
065-040-315080-050-315
100-065-315125-080-315
125-100-315
150-125-315
2 4 6 8 10 20 40 60 80 100 200 400
6
8
10
20
40
60
80
100
120
5 10 20 30 40 50 100 200 500 1000 20001500
20
25
30
50
40
100
200
400
500
300
Head
[ ft
]
Head
[ m
]
2900 1/min
Kennfeld Prospekt NOV 2900 U
Flowrate[ usgpm ]
Flowrate[ m³/h ]
14
040-025-125
040-025-160
040-025-200
080-050-200
050-032-250
200-150-250
065-040-315080-050-315
200-150-315
400-350-400
400-400-500(1180 1/min)
200-150-500
2 4 6 8 10 20 40 60 80 100 200 400 600 1000800 2000 4000
6
8
10
20
40
60
80
100
140
15
20
50
100
200
300
400450
125-100-400
Head
[ ft
]
Head
[ m
]
050-
032-
125
065-
040-
125
080-
050-
125
100-
065-
125
050-
032-
160
065-
040-
160
100-
065-
160
125-
080-
160
080-
050-
160
065-
040-
200
100-
065-
200 125-
100-
200
125-
080-
200
050-
032-
200
065-
040-
250
080-
050-
250
100-
065-
250
150-
125-
250
125-
100-
250
125-
080-
250
150-
125-
315
125-
100-
315
125-
080-
315
100-
065-
315300-
250-
315
250-
200-
315
150-
125-
400
200-
150-
400
250-
200-
400
300-
250-
400
350-
300-
400
300-
250-
500
250-
200-
500350-
300-
500 400-
350-
500
5 10 20 30 40 50 100 500 1000 5000 10000 20000
250-
200-
250
1750 1/min
Kennfeld Prospekt NOV 1750 U
Flowrate[ usgpm ]
Flowrate[ m³/h ]
Kennfeld Prospekt NOV 3500 U
1 600
250
10
040-025-125
050-032-125
065-040-125 080-050-125
100-065-125
040-025-160 050-032-160
065-040-160
080-050-160 100-065-160
125-080-160
040-025-200 050-032-200
065-040-200
080-050-200
100-065-200
125-080-200
125-100-200
050-032-250 065-040-250
080-050-250
100-065-250
125-080-250
125-100-250150-125-250
20
40
60
80
100
150
200
2 4 6 8 10 20 40 60 80 100 200 400
50
40
100
200
400
150
300
600
800
5 1010 20 30 40 50 100 200 500 1000 2000 2500
065-040-315
080-050-315
100-065-315
125-080-315
125-100-315
Head
[ ft
]
Head
[ m
]
3500 1/min
Flowrate[ usgpm ]
Flowrate[ m³/h ]
Klaus Union GmbH & Co. KG Blumenfeldstraße 18 | 44795 Bochum | GermanyPhone: +49 (0) 234 4595-0 | Fax: +49 (0) 234 4595-7000 | E-Mail: [email protected] KU
_NOV
_201
8/01
Product Range Pumps:
Pumps with Magnet Drive
E Centrifugal Pumps acc. to DIN EN ISO 2858 & DIN EN ISO 15783, SLM NV
E Centrifugal Pumps acc. to ASME B73.3M, SLM AVE Centrifugal Pumps for Petrochemical Applications
acc. to API 685, SLM APL / SLM APCE Centrifugal Pumps for High Pressure
Applications, SLM SV / SLM GVE Centrifugal Pumps for High
Temperature Applications, SLM NHOE Self-Priming Centrifugal Pumps, SLM SVE Multi-Stage Centrifugal Pumps,
Tension-Rod or Barrel-Type Design, SLM GVE Submerged Centrifugal Pumps, SLM NVTE Twin Screw Pumps acc. API 676, SLM DSP-2C
Pumps with Shaft Sealing
E Centrifugal Pumps acc. to DIN EN ISO 2858 & DIN EN ISO 5199, NOV
E Multi-Stage Centrifugal Pumps, Tension-Rod or Barrel-Type Design, GOV / GOVT
E Horizontal and Vertical Propeller Pumps, PE Bottom-Flange Propeller Pumps, UPE Submerged Centrifugal Pumps, TP NOE Submerged, Multi-Stage Centrifugal Pumps, TP GOE Twin Screw Pumps acc. API 676, DSP-2C / DSP-4C
Product Range Valves:E Globe Valves, TE Globe Valves, YE Gate Valves, Isomorphous Construction SeriesE Gate Valves, Wedge or Wedge PlatesE Relief ValvesE Check ValvesE Sight GlassesE StrainersE FiltersE Bottom ValvesE Safety Valves
Klaus Union Service Performance:
E Workshop / On-Site RepairsE Genuine Spare Part Delivery WorldwideE Spare Parts StorageE Customized Spare Parts ManagementE On-Site MaintenanceE InstallationE RetrofittingE On-Site Testing / MonitoringE Customer Advisory ServiceE Start Up & CommissioningE Individual 24 / 7-ServiceE Trouble-ShootingE In-House & On-Site TrainingE On-Site Assembly and DisassemblyE Long-Term Maintenance ContractsE Maintenance Planning and ConsultingE Diagnostics