TheSmartTime
Search
Main Menuo About
Categories o dyeing o Textile Processing
Cellulose & its blend dyeing Cotton Pretreatment
o Uncategorized
Archiveso August 2010 o January 2010 o October 2009
My Websiteso Textile Processing Guide o Yoga for health and beauty
Metao Log in o RSS o Comments RSS o Valid XHTML
What are the textile auxiliaries available in the market?Posted by Thesmarttime | Textile Processing | Tuesday 31 August 2010 2:18 pm
Find
DEMINERALIZATION:
BEST PRODUCTS IN THE MARKET
MANUFACTURER
IONIC NATURE
CHEMICAL COMPOSITION
SPECIFIC PROPERTIES
LUFIBROL MSD
BASF MIXTURE OF DISPERSING AND COMPLEXING SUBSTANCES
Extracting and dispersing agent with stabilizing and anticatalytic effect in the
alkaline peroxide bleach. Improves the degree of whiteness and absorbency.
INVATEX AC HUNTSMAN Anionic Preparation based on special organic acids .
INVATEX -
AC cracking agent is easily
miscible with water in all proportions and can be used,
diluted as well as undiluted, for automatic dosing systems.
SIRRIX N LIQUID
CLARIANT An effective neutralizing agent ideal for Core alkali removal and for ensuring an acidic pH in finishing processes.
DESIZING:
BEST PRODUCTS IN THE MARKET
MANUFACTURER
IONIC NATURE
CHEMICAL COMPOSITION
SPECIFIC PROPERTIES
REXSIZE WHT500
ROSSARI ENZYME
INVAZYME L40
HUNTSMAN α-amylaze enzyme for selective degradation of starch sizes to facilitate easy subsequent
processing.BACTOSOL TK LIQ;
BACTOSOL PHC LIQ; BACTOSOL HTN.IN; BACTOSOL
CLARIANT α-amylaze enzyme
Economical enzyme for conventional processes.
TK.IN LIQLUZYME PS BASF Enzyme used in
the desizing of textiles at application temperatures
ranging from 60 °c
to 110°C
Luzyme PS is particularly suitable for desizing by the Pad Steam process.
WETTING AGENTS:
BEST PRODUCTS IN THE MARKET
MANUFACTURER
IONIC NATURE
CHEMICAL COMPOSITION
SPECIFIC PROPERTIES
LISSOPOL 100X
ICI NON-IONIC 100% NON-IONIC WETTING AGENT
SANDOZIN NITI
CLARIANT NON-IONIC Non-ionic wetting agent and detergent.
SANDOZEN MRA
CLARIANT NON-IONIC Strong wetting , washing & cleaning agent free from solvents for all types of fibers
ULTRVON RW
NON-IONIC Synergetic preparation of special surfactants.
Good resistance to oxidative and
reductive bleaching agents.
Good stability to
Wetting agent and detergent with very good re-wetting action and
extremely low foaming, for discontinuous pretreatment processes on
alkali and acids.
Very good compatibility with
enzymes.
-
cellulosics and their blends with synthetics.
SCOURING AGENTS:
BEST PRODUCTS IN THE MARKET
MANUFACTURER
IONIC NATURE
CHEMICAL COMPOSITION
SPECIFIC PROPERTIES
KIERLON JET B CONC
BASF NON-IONIC Mixture of nonionic surfactants.
Low-foaming detergent for wetting and scouring woven and knitted fabrics
in machines with high liquor turbulence (jet-dyeing). Particularly suitable in
finishing liquors with or without pigments.
AMOLLAN FBOL
BASF NON-IONIC
IMEROL PC LIQUID
CLARIANT Sandoclean PC Liquid is a biologically degradable, APEO and solvent-free wetting agent/detergent
with emulsifying and dispersing action for the scouring and removal of mineral oil contamination from textiles.
IMEROL XNI CLARIANT A versatile product for one bath scouring and bleaching of cotton woven and hosiery fabric, scouring aid for wool and specialty product for combined scouring and dyeing of polyester fibers, yarn and fabric.
IMEROL SR CLARIANT An efficient scouring and stain extracting agent for cellulosic, polyester and their blends in knitted and woven form.
MERCERISING AGENTS:
BEST PRODUCTS IN THE MARKET
MANUFACTURER
IONIC NATURE
CHEMICAL COMPOSITION
SPECIFIC PROPERTIES
PERMINAL MA SPL
ICI CRODA ANIONIC NON-CRYSELIC WETTING AGENT
Low-foaming, highly alkali stable, noncresylic
mercerizing wetting agent for cotton.
MERCEROL QWNI
CLARIANT ANIONIC NON-CRYSELIC WETTING AGENT
An effective, high active, cresol-free, low foaming wetting agent for mercerization of cotton and cellulosic blends in yarn, woven and knitted form.
DYE-BATH CONDITIONERS:
BEST PRODUCTS IN THE MARKET
MANUFACTURER
IONIC NATURE
CHEMICAL COMPOSITION
SPECIFIC PROPERTIES
ALBATEX DBC
HUNTSMAN ANIONIC Mixture of an additional complexing agent and polymers
Improves dye solubility. Surfactant-free, non-foaming
formulation. No demetalization of dyes. Prevents staining of dyeing
machines.
Free from APEO and phosphates
Not toxic to the environment.
DRIMAGEN ERI
CLARIANT Leveling agent and dye bath conditioner
with complexing and dispersing properties for dyeing with reactive dyes.
DEPSO DYE LDVRD
ICI Leveling agent and dye bath conditioner with complexing and dispersing properties for dyeing with reactive dyes.
DEKOL SN NEW
BASF Acrylate copolymer, sodium salt in water.
Pumpable dispersing agent, protective colloid and complexing agent for all
stages in the dyeing of textiles of cotton and cotton blends
SEQUESTERING/DISPERSING/SOAPING AGENTS:
BEST PRODUCTS IN THE MARKET
MANUFACTURER
IONIC NATURE
CHEMICAL COMPOSITION
SPECIFIC PROPERTIES
METAXIL ADW
ICI (CRODA) ANIONIC SODIUM SALT OF POLYACRILYC ACID
powerful dispersing agent to remove unfixed and hydrolysis reactive dye and side by side acts a chelating agent also( it work as a protective
colloid for elimination of problem caused by redeposit ion of insoluble calcium and magnesium salt without any demetalizing effect on dyestuff) .it is also good washing off agent for reactive dyeing
DEKOL SN BASFSANDOPUR RSK LIQ
CLARIANT Sandopur RSKI Liquid Conc. is the novel washing
off agent which is very efficient in the washing
of hydrolyzed reactive dyes. It improves the hard
water stability of sensitive dyes. It doesn’t foam,
therefore it is suitable for jets/soft flow machines.
It is APEO free and ecofriendly product.
CIBAPON R HUNTSMAN ANIONIC Modified Polyacrylic Acid Sodium Salt in
WaterALBATEX AD
HUNTSMAN Anionic Sodium salt of a polyacrylic acid
Highly efficient dispersant for
insoluble and sparingly soluble
calcium salts, pectins and other
impurities such as cotton linters. Dissolves hydrolysed dyes during soaping.
LADIQUEST 1097
CLARIANT Anionic Scouring additive with dispersing,sequestering and washing offproperties.
Foam free.
Promotes removal of unfixed dye.
Acts as a protective colloid.
High washing and dispersing power.
SOAPING AGENTS:
BEST PRODUCTS IN THE MARKET
MANUFACTURER
IONIC NATURE
CHEMICAL COMPOSITION
SPECIFIC PROPERTIES
LISSOPOL D PASTE
ICI CRODA ANIONIC CHLOROSULPHONATED FATTY ALCOHOLS
POWER FUL DETERGENT AND WETTING AGENT COMMONLY
USED FOR SOAPING.
SANDOPUR RSK LIQ
CLARIANT Sandopur RSKI Liquid Conc. is the novel washing
off agent which is very efficient in the washing
of hydrolyzed reactive dyes. It improves the hard
water stability of sensitive dyes. It doesn’t foam,
therefore it is suitable for jets/soft flow machines.
It is APEO free and ecofriendly product.
ALBATEX DSI CONC
HUNRSMAN Anionic Sodium salt of a polyacrylic acid
Improves the quality and reproducibility of virtually every textile, wet process.
Washing off agent for reactive dyeings and prints on cellulosic fibers.
CIBAPON R HUNTSMAN ANIONIC Modified Polyacrylic Acid Sodium Salt in Water
METAXIL ICI CRODA ANIONIC SODIUM SALT OF powerful
ADW POLYACRILYC ACID dispersing agent to remove unfixed and hydrolysis reactive dye and side by side acts a chelating agent also( it work as a protective colloid for elimination of problem caused by redeposit ion of insoluble calcium and magnesium salt without any demetalizing effect on dyestuff) .it is also good washing off agent for reactive dyeing
STAIN REMOVERS:
BEST PRODUCTS IN THE MARKET
MANUFACTURER
IONIC NATURE
CHEMICAL COMPOSITION
SPECIFIC PROPERTIES
ASTOL A ICI CRODA Stain removing agent to remove oil borne stains from textiles.
IMEROL XNI CLARIANT A versatile product for one bath scouring and bleaching of cotton woven and hosiery fabric, scouring aid for wool and
specialty product for combined scouring and dyeing of polyester fibers, yarn and fabric.
IMERAOL SR CLARIANT An efficient scouring and stain extracting agent for cellulosic, polyester and their blends in knitted and woven form.
HYDROGEN PEROXIDE STABILIZERS:
BEST PRODUCTS IN THE MARKET
MANUFACTURER
IONIC NATURE
CHEMICAL COMPOSITION
SPECIFIC PROPERTIES
STABILIZER AWNI
CLARIANT Economical, eco-friendly, effective Peroxide Stabilizer.
TINOCLARITE CBB
HUNTSMAN Non silicate stabilizer for use in peroxide cold pad-batch, pad-steam bleaching without silicate as well as the alkaline discontinuous long liquor peroxide bleach process.
CATIONIC DYE FIXING AGENTS:
BEST PRODUCTS IN THE MARKET
MANUFACTURER
IONIC NATURE
CHEMICAL COMPOSITION
SPECIFIC PROPERTIES
SANDOFIX WEI
CLARIANT Cationic CATIONIC DYE FIXING AGENT
FIXONOL PN ICI CRODA Cationic CATIONIC COST EFFICIENT DYE FIXER
CATIONIC FORMALDEHYDE FREE DYE FIXING AGENTS:
BEST PRODUCTS IN THE MARKET
MANUFACTURER
IONIC NATURE
CHEMICAL COMPOSITION
SPECIFIC PROPERTIES
TINOFIX ECO
HUNTSMAN Cationic AQUEOUS SOLUTION BASED ON POLYETHYLENE POLYAMINE
No formaldehyde dye fixing agent
TINOFIX FRD HUNTSMAN Cationic Cationic Quaternary Polyamine;
No formaldehyde dye fixing agent
LADIQUEST 4321
CLARIANT CATIONIC No formaldehyde dye fixing agent
FINISHING AIDS:
NON-IONIC SOFTNERS
BEST PRODUCTS IN THE MARKET
MANUFACTURER
IONIC NATURE
CHEMICAL COMPOSITION
SPECIFIC PROPERTIES
AVIVAN SFC HUNTSMAN NON-IONIC Non yellowing softening agent for textiles. Does not impair water
absorbency of treated goods.
CERANINE HINI
CLARIANT NON-IONIC Non-ionic softener, gives a smooth filling handle.
CATIONIC SOFTNERS
BEST PRODUCTS IN THE MARKET
MANUFACTURER
IONIC NATURE
CHEMICAL COMPOSITION
SPECIFIC PROPERTIES
CERANINE HCS
CLARIANT CATIONIC Cationic softener with excellent soft bulky fee
SAPAMINE OC
HUNTSMAN CATIONIC Amide derivative of an aliphatic carbon acid
I
• Gives fabrics a warm luxurious feel
• Low sublimation
• Reduced contamination of machinery parts and
condensation sports on the fabric
• Anti-soiling properties
• Can help to reduce fabric seconds during
manufacturing
• Helps to keep the fabric looking newer
and fresher
for long during wearing and washing of the
garment
• Very high degree of exhaustion • Excellent product efficiency
• Low waste water contamination
• Product can be used even form long liquor ratio
CIRRASOL CS
ICI CATIONIC
ANIONIC SOFTENERS
BEST PRODUCTS IN THE MARKET
MANUFACTURER
IONIC NATURE
CHEMICAL COMPOSITION
SPECIFIC PROPERTIES
LUSIL XLHW
ICI ANIONIC
SILICONE SOFTNERS
BEST PRODUCTS IN THE MARKET
MANUFACTURER
IONIC NATURE
CHEMICAL COMPOSITION
SPECIFIC PROPERTIES
LUBRICATING AGENTS
BEST PRODUCTS IN THE MARKET
MANUFACTURER
IONIC NATURE
CHEMICAL COMPOSITION
SPECIFIC PROPERTIES
Depsolube ACS
ICI ANIONIC LOWFOAM PROCESS BATH ANTICREASING LUBRICANT AND EMULSIFIER.
Comments (0)
How to identify the fibers in a blended fabric?Posted by thesmarttime | Textile Processing | Saturday 28 August 2010 1:02 pm
Introduction
(more…)
Comments (0)
Polyester getting tinted while dyeing Reactive Turquoise Blue combination of a poly/cot blended knit fabric. How to dye without tint?Posted by thesmarttime | dyeing | Saturday 30 January 2010 5:13 pm
Given below may be the best route for processing a knit poly-cot blend:
Pretreatment:
1. Wetting off:
Recipe:
Wetting agent (No foaming) = 0.5%
Treat @ 70°C for 10 minutes.
Drain.
2. Scouring & Bleaching:
a. Recipe:
i. Soda Ash = 0.5%
ii. Caustic Soda = 0.7%
iii. Non foaming detergent = 0.5%
iv. Peroxide Stabilizer = 0.5%
v. Hydrogen Peroxide(50%) = 1.5%
1. @ 85°C for 1 hour.
2. Drain and do cold wash
3. Neutralization:
a. Recipe:
i. Acetic Acid = 1 ml/liter
1. Treat @ cold for 10 minutes.
2. Wash cold 10 minutes
3. Check pH and let it be 6
4. Heat Setting:
a. Do heat-setting in a stenter @ 200°C for 30 seconds (split open) with 3% overfeed on pins at 15 meters/minute speed.
5. Mercerising:
a. Recipe:
i. Caustic lye = 50°TW
ii. Permenol N = 10 ml/liter (Mercerizing Wetting Agent)
Wash free from residual alkali
6. Polyester Dyeing: (Optional)
a. Recipe:
i. Lyogen PESI = 1.0 g/l (Dispersing & Leveling Agent)
ii. Acetic Acid = 1.0 g/l
1. Run @ 50°C for 10 minutes
iii. Add dissolved dyestuff @ 50°C and run 10 minutes
iv. Raise the temperature from 50 to 115°C @ 2°/minute – 30 minutes
v. Raise the temperature from 115 to 135°C @ 0.5°C/minute – 40 minutes
vi. Cool to 80°C and drain
7. Reduction Clearing (R.C.):
a. Recipe:
i. Cyclanon ECO = 2 grams/liter (Reduction Clearing Agent from BASF)
ii. Acetic Acid = 2 grams/liter
1. Treat at 80°C for 10 minutes
2. Wash cold
8. Reactive Dyeing:
a. Set pH to 6 by addition adequate quantity of Acetic acid ( may be up to 0.3 to 0.5 cc/liter)
b. Cotfix Turq Blue H2GP = 3.0%
c. Cotfix Yellow ME4GL = 1.0%
d. Glauber’s Salt = 80 grams/liter OR
e. Soda Ash = 20 grams/liter
i. Dye using Special Turquoise Blue Dyeing Method
a. Cotfix Turq Blue H2GP = 3.0%
b. Cotfix Yellow ME4GL = 1.0%
c. Glauber’s salt = 80 grams/liter
d. Soda Ash = 10 grams/liter
e. Caustic Soda Flakes = 2.75 grams/liter
Dye using the Special Turquoise Blue Preconditioning Method:
9. Neutralize:
Acetic Acid 2.5 grams/liter (instead of 1 g/l)
10. Soaping:
a. Method -1:
I – Soaping:
Recipe:
Lissopol D paste 2 grams/liter @ 80°C for 20 minutes.
II – Soaping:
Recipe:
Lissopol D paste 1 gram/liter @ 80°C for 20 minutes.
b. Method – 2:
I – Soaping:
Recipe:
Sandopon RSK Liq 2 grams/liter
Lyocol RDN 1 gram/liter (dispersing agent for Disperse dyes – used here for better soaping)
@ 80°C for 20 minutes.
II – Soaping:
Recipe:
Sandopon RSK Liq 1 gram/liter
Lyocol RDN 0.5 gram/liter
@ 80°C for 20 minutes.
c. Method- 3:
I – Soaping:
Recipe:
Cyclanon X-CW NEW = 2 gram/liter
Lyocol RDN = 1 gram/liter
@ 80°C for 20 minutes.
II – Soaping:
Recipe:
Cyclanon X-CW NEW = 1 gram/liter
Lyocol RDN = 0.5 gram/liter
@ 80°C for 20 minutes
Hot Wash
Cold Wash
11. Acetic Acid treatment:
Acetic Acid 0.5 cc/liter
12. If necessary use Formaldehyde free Cationic fixing treatment.
a. Sapamine OC = 1%
b. Cationic Fixing = 1%
i. @ Cold treat for 30 minutes.
ii. Wash cold
iii. Drain & unload the batch.
Note:
If a dose of 0.3 cc/liter of Acetic acid is incorporated in the soaping bath, the staining of reactive dyes on polyester during soaping may be completely avoided. Soaping bath pH should be 5 to 6.
A final wash after Soaping with 1 gram/liter of Acetic Acid or 0.5 gram/liter of Formic acid and maintaining a pH 5 to6 during drying would avoid tinting of reactive dyes by migration in to polyester.
Even after taking all precautions, if the polyester part still gets stained, treat the tinted fabric with:
Acetic Acid = 2grams/liter
Alcosperse AD = 2 grams/liter
Cibapon R liq = 2 grams/liter
At 80°C for 30 minutes; this would remove the stains from the polyester.
Summary:
1. In preparation no residual chemicals of the pretreatment should remain on the fabric. The RFD fabric should be checked for a pH of 6 at the end of pretreatment and before dyeing.
2. The pH should be 6 at the beginning of reactive dyeing.
3. After dyeing is over, neutralization with Acetic acid should be done and check the pH to 6.
4. Ensure sufficient hot wash to reduce the electrolyte (salt) concentration to a minimum of 1 g/l before soaping, otherwise imperfect soaping would be done.
5. During soaping maintain a pH of 6 to avoid staining of polyester.
6. The soaping temperature should be maintained strictly at 80°C. More than this would open the polyester fiber and create a tendency for unfixed reactive dye to enter into polyester fiber as stain.
7. The final pH should be 6 before drying and it may be controlled by using 0.5 cc/liter of Formic Acid.
Notes on Resin finishing:
Recipe:
Resin KVS = 45 g/liter
PV Acetate = 25 g/liter
PVA = 25 g/liter
PE = 20 g/liter
Acetic Acid = 1 cc/liter
Pad 2 dip 2 nip – pressure 35 kgs/sqcm. – speed 25 mtrs/minute and temperature – 170°C – No over feed.
Comments (0)
Package dyeing of yarn with HE dyestuffsPosted by thesmarttime | dyeing | Sunday 17 January 2010 9:29 pm
Start Dyeing @50°C; ensure the starting bath pH be 6; adjust with Acetic Acid if necessary.
Add salt (vacuum or Glauber’s salt) and hold for 15 minutes Add ½ the volume of dissolved and filtered dyestuff and hold 10 minutes. Add ½ the volume of dissolved and filtered dyestuff and hold 10 minutes. Raise the temperature @2°C/minute to 80°C and hold for 20 minutes. Add ½ alkali (Soda ash) and hold 25 minutes. Add ½ alkali (Soda ash) and hold for 30 minutes. Check sample Drain Cold wash (10 + 10 minutes) Neutralize @ 40°C with adequate qty of Acetic acid. Cold wash – 10 minutes Hot Wash @ 70°C (2°C/minute) – 10 minutes Soap @ 95°C – 15 minutes (1st soap) Soap @ 95°C – 15 minutes (2nd soap) Soap @ 95°C – 15 minutes (3rd soap) Hot Wash Sample check for shade and wash fastness Cold wash (10 + 10) minutes Acid wash with 1 gpl of acetic acid In the same acid bath – cationic softener treatment – 20 minutes Check pH – 6 Unload.
Comments (0)
Cotton-Nylon fabric/yarn dyeingPosted by thesmarttime | dyeing | Sunday 17 January 2010 9:14 pm
Cotton and Nylon blended fabrics may be dyed using the above process diagram. Machinery: (Cheese dyeing machine or Soft-flow machine)
Set the dye bath with1.5 to 2.5 gpl acetic acid at room temperature. Add the total quantity of Glauber’s salt for reactive dyeing in two portions. This will
function like a leveling agent for acid dyeing. Add the dyestuff mixture of acid and reactive dyes in two portions. Raise the temperature to 80°C @ 1°/minute. Hold at 80°C for 30 to 45 minutes according to the recipe/depth of nylon dyes (acid
dyes). Then check the shade for nylon portion by carbonizing the cellulose in 70% Sulphuric
acid. If not ok, make required additions and continue dyeing otherwise reduce the temperature
to 60°C @ 2°/minute. At 60°C add alkali in two portions as mentioned above. Check pH. It should be 10.8 to
11.2. Continue dyeing for 45 to 90 minutes according to depth. Drop the bath. Cold wash twice for 10 minutes each. Neutralize with 1gpl of acetic acid at 40°C – Drain. Hot wash at 70°C – 10 minutes. I- Soaping with Sandopur RSK Liq – 2 gpl at 90°C II – Soaping with Sandopur RSK Liq – 1 gpl at 90°C Hot wash at 70°C Cold wash – twice for 10 minutes each. Acid wash with 1 gpl acetic acid at cold. Unload or take it for finishing.
Few suggestions for continuous dyeing are:
1. Continuous Dyeing of Nylon and cotton blends may be done using disperse and reactive dyes in the same way we do for polyester and cotton. Thermosolling may be done at 80 to 90°C instead of 135 to 150°C. A bottleneck with disperse dyeing is, you can produce only light and medium shades only. With disperse dyestuff you may not get proper yield and washing fastness.
2. With Clariant there is a dyestuff called ‘Forosols’ that can be used for dyeing both cotton and polyester for solid shades. You can make a lab trial in consultation with Clariant people and then finalize your process for continuous dyeing.
Comments (0)
Guide to Select the Right Fiber for the Right ProductPosted by thesmarttime | Uncategorized | Wednesday 13 January 2010 9:08 pm
One of the most important aspects of a textile product is the fabric. There are a number of criteria upon which the fabric selection is based. In the world of fashion, color, texture and pattern are paramount. However, less apparent but equally important is fiber type. Fibers have specific properties that can influence the performance and comfort of a garment. In order to produce a product with the desired characteristics, the appropriate fiber must be selected. (more…)
Comments (0)
What are the benefits of Hot Mercerization?Posted by Thesmarttime | Cotton Pretreatment, Textile Processing | Friday 23 October 2009 10:32 pm
Short and hot …During hot impregnation the lye penetrates faster and more evenly into the yarn core. Swelling therefore does not take place only on the fabric surface. As Compared with cold impregnation the swelling behavior is considerably better and has a positive influence on the dimensional stability. The more uniform swelling gives, with dyed goods, a more equal appearance. With the wet-on-wet method the exchange factor is increased thus permitting a shorter impregnation zone than with conventional processes. In addition, the lye volume is kept very low. The lye concentration is simple to control. The lye bath has been kept purposely small and under it there is one single lye tank integrated into the machine. (more…)
Comments (0)
Useful Hints on Reactive Dyeing
Posted by thesmarttime | Cellulose & its blend dyeing, Textile Processing | Thursday 22 October 2009 4:35 pm
General:
Since sodium sulphate generates less sodium ion with respect to NaCL, cotton surface becomes less substantive, that is precondition for light shades. So sodium sulphate is preferred;
o -Light shadeso -Blue 19 and Blue 21o -Viscose fibero In case low bath ratio and high circulation dyeing machines, electrolyte
concentration should be decreased.o If bath ratio is increased, e.g. in sample dye units, salt amount should be
increased.o After the addition of salt and dye, at least 40 min. should be elapsed, to obtain
perfect dye distribution and migration.o In case of high bicarbonate content of process water, final pH is around 10,2-10,4
which is very low for good fixation and shade repeatability. Optimum pH should be around 10,8-11,2. After soda addition, after 15 min., 1-3 g/lt NaOH is supplied in 15 min. and processed 15 min. more. (more…)
Comments (3)
How to improve the tear and tensile strength of a fabric?Posted by thesmarttime | Cotton Pretreatment, Textile Processing | Thursday 22 October 2009 11:21 am
1. How to improve the tear and tensile strength of the fabric? 1. i. There are many reasons for the loss of tensile and tear strength. Right from
singeing, if the intensity and height of the flame is higher than the required; the fabric is likely to be scorched. To avert this, various speeds ranging from 70, 80, 90 meter/minute are to be tried in singeing and the efficiency can be ascertained by pilling test over specified measurements (10 x 10 sq.in).
2. ii. Excessive emerizing may lead to strength loss.3. iii. Resin finishing (for DP value) : A loss of 20 per cent fabric strength is
unavoidable if the chemicals after application and curing are not properly washed by suitable alkali treatment (2 gpl soda ash in cold water and then washing etc.). We also suggested a suitable recipe for obtaining a better DP value onn their fabric. (more…)
Comments (2)
Right Procedure for dyeing Turquoise Blue G on Viscose rayon substratePosted by thesmarttime | Cellulose & its blend dyeing, Textile Processing, Uncategorized | Wednesday 21 October 2009 9:55 pm
Some general characters of viscose fiber:
Viscose has lower tenacity than cotton when it’s dry and wet. SO more care should be taken in wet processing of the fabric or yarn made of viscose fiber to prevent fabric tears and breakages. It has more elongation in wet and conditioned state than cotton fiber.
Both viscose and modal are being supplied by the manufacturers almost in pure state and mostly do not need any bleaching operation for dark and medium shades. However viscose cotton blends need some mild bleaching before dyeing.
The water retention value (swelling index) is more than cotton and modal fibers. It swells within 10 seconds when immersed in water even at lower temperatures. It is to be noted that the fabric acquires stiffness when it is wet because of the high swelling that makes the fabric compact and hence stiff. (more…)
Comments (1) Next Page »
TheSmartTime is powered by Wordpress. Wordpress theme designed by Design Blog.