December 2014
We, Samsung, declare that our component Chip Resistor is produced in accordance with EU RoHS directive.1.RoHS Compliance and restriction of Br
The following restricted materials are not used in packaging materials as well as products in compliance with the law and restriction.- Cd, Pb, Hg, Cr6+, As, Br and the compounds, PCB, asbestos - Bromic materials : PBBs, PBBOs, PBDO, PBDE, PBB
2.No use of materials breaking Ozone layerThe following ODS materials are not used in our fabrication process.- ODS material : Freon, Haron, 1-1-1 TCE, CCl4, HCFC
If you want more detailed Information,Please Visit Samsung Electro-mechanics Website [http://www.sem.samsung.com, http://www.semlcr.com]
CONTENTS
Operation Notes
Example of land Pattern Design
Recommended Soldering Conditions
General Structure
General
Low ohms(RUT Series)
Ultra Low ohms(RU Series)
Ultra Low Ohms(RUK Series)
Ultra Low Ohms(RJ Series)
Arrays(Convex Type)
Arrays(Concave Type)
Arrays(Flat Type)
Anti-Sulfur Resistors
Anti-Sulfur Resistor Arrays(Convex Type)
Anti-Sulfur Resistor Arrays(Concave Type)
Anti-Sulfur Resistor Arrays (Flat Type)
Automotive Anti-sulfur
Automotive Anti-sulfur Arrays (Convex Type)
Attenuator
Characteristics Performance
Packaging
Standard Resistance Value
4
5
6
7
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
OperationNotes
Example of landPattern Design
RecommendedSoldering Conditions
General Structure
General
Low ohms(RUT Series)
Ultra Low ohms(RU Series)
Ultra Low Ohms(RUK Series)
Ultra Low Ohms(RJ Series)
Arrays(Convex Type)
Arrays(Concave Type)
Arrays(FlatType)
Anti-SulfurResistors
Anti-Sulfur ResistorArrays(Convex Type)
Anti-Sulfur ResistorArrays(Concave Type)
Anti-Sulfur Resistor Arrays (Flat Type)
Automotive Anti-sulfur
Automotive Anti-sulfurArrays (Convex Type)
Attenuator
CharacteristicsPerformance
Packaging
StandardResistance Value
To maintain proper quality of chip components, the following precautions are required for storage environment, method and period.
Storage Environment - Make sure that the ambient temperature is within 5 ~40
and the ambient humidity is within 20~70%RH.- Chip components may be deformed, if the temperature of
packaged components exceeds 40 .- Do not store where the soldering properties can be
deteriorated by harmful gas such as sulphurous gas, chlorine gas, etc.
- Bulk packed chip components should be used as soon as the seal is opened, thus preventing the solderability from deteriorating.
- The remaining unused chips should be put in the originalbag and sealed again or store in a desiccator containing a desiccating agent.
Storage Time PeriodStored chip components should be used within 6 months after receiving the components. If 6 months or more have elapsed, please check the solderability before actually using.
Chip resistors are designed for general electronic devices such as home appliances, computer, mobile communications,digital circuit, etc. If you require our products with high reliability-performing at more than 125 or below -55 - for medical equipments, aircrafts, high speed machines, militaryusage, and items that can affect human life or if you need to use in specific conditions (corrosive gas atmosphere like H2Setc.), please contact us beforehand.
Normal operation temperature ranges ( ): -55~+155Others (small sizes and flat type arrays) : -55 ~+125
Although resistor body is coated, sharp excessive impact should be avoided to prevent damages and adverse effects on characteristics (resistor value, open circuited, T.C.R.).
Applications
Please give more attention not to press the chip owing to the nozzle's improper height when it is mounted on PCB.(Excessive pressure may cause exterior damage, change in resistance, circuit open, etc.)
Mounting
Storage
These products are designed and produced for applyingto the ordinary electronic equipments.(AV equipment, OA equipment,Telecommunicationequipment, etc)Consult with our sales department before applyingin the devices that require extremely highreliability such as medical equipments, transportequipments, aircrafts/spacecrafts, nuclear powercontrollers, fuel controllers, car equipments includingcar accessories and other safety devices.Following special environments, and suchenvironmental conditions may affect the performanceof the product. Please verify the performanceand reliability thoroughly prior to use.
a) Using in various type of Liquid including water,oil, organic solvent and other chemicals.
b) Using in the places where the products are exposedto direct sunlight, sea wind, corrosivegases (including Cl2, H2S, NH3, SO2, NO2), static electricity, electromagnetic waves and dusty air.
c) Using close to heat generating components orother flammable items.
d) Using in the places that is sealed or coatedwith resins or other coating materials aftersoldering.
e) Using in places subject to dew condensation.
These products are not radiation resistant.The company is not responsible for any problemsresulting from using of the products under theconditions not recommended herein.The company should notify any safety issues of theproducts to the customer. And the safety of theproducts should be monitored by the customerperiodically.
Safety precautions
After Soldering Cleaning, soldering flux & Ionic cleaning liquid should be avoided on product. If any possibility on product, please take a test before usage.
Cleaning
Manual workWhenever separating chip resistor from PCB, do not re-usethe chip resistor for circuit safety. Electrical specification of chip resistors can be changed by soldering iron after separation. Re-use of separated chip resistor should be prohibited.
Do not use more than rated voltage. (Please check the contents of each product)
Others
Chip resistor installation on PCB is a similar phenomenon on to a chocolate chip on top of a cake. PCB has enough flexibility on outer force but Chip resistor can be defected without any bending. (By chip resistor use of Ceramic, solder, metal) Therefore, when separating a Chip resistor from a PCB, beware of any crack on the chip.
Caution for Chip ResistorSeperation from PCB.
Operation Notes
4
5
OperationNotes
Example of landPattern Design
RecommendedSoldering Conditions
General Structure
General
Low ohms(RUT Series)
Ultra Low ohms(RU Series)
Ultra Low Ohms(RUK Series)
Ultra Low Ohms(RJ Series)
Arrays(CONVEX Type)
Arrays(CONCAVE Type)
Arrays(FLAT Type)
Anti-SulfurResistors
Anti-Sulfur ResistorArrays(Convex Type)
Anti-Sulfur ResistorArrays(Concave Type)
Anti-Sulfur Resistor Arrays (Flat Type)
Automotive Anti-sulfur
Automotive Anti-sulfurArrays (Convex Type)
Attenuator
CharacteristicsPerformance
Packaging
StandardResistance Value
When designing P.C.B, the shape and size of the solder lands must allow a proper amount of solder to form under the resistor.The amount of solder formed at the end terminations has direct effect on the possibility of chip crack.The more the amount of solder and stress, the more the possibilities of chip crack.
Type A B 2A+B C *0816
1220
1632
2037
*3264
0.5
0.7
1.1
1.4
2.0
0.3
0.4
0.6
1.2
1.6
1.3
1.8
2.8
4.0
5.6
1.6
2.0
3.3
3.8
6.5
(UNIT: mm)
Type A B 2A+B C 0402
0603
1005
1608
2012
3216
3225
50256432
0.17
0.37
0.6
0.8
0.9
1.3
1.3
1.41.4
0.20
0.28
0.5
0.8
1.4
1.8
1.8
3.34.6
0.54
1.02
1.7
2.4
3.2
4.4
4.4
6.17.4
0.18
0.29
0.5
0.8
1.2
1.5
2.4
2.43.0
Type A B C D E P1 P2
062P
064P
10AT
102P
104P
164P
0.20
0.20
0.4
0.4
0.5
0.7
0.20
0.20
0.4
0.4
0.3
0.5
0.30
0.20
0.25
0.25
0.2
0.3
0.30
0.30
0.5
0.5
0.5
0.9
0.30
0.30
0.5
0.5
0.5
0.8
0.50
0.40
0.65
0.65
0.55
0.9
-
0.40
-
0.5
0.8
A B A
C
: Land Pattern
: Chip Resistor
: Land Pattern
: Chip Resistor
A
P2 P1 P
B C
D
E
Convex type
Reflow Soldering(RJ, RW) Reflow Soldering(RC, RCA, RCM, RUT)
Type A B 2A+B C 1005
1608
2012
3216
3225
5025
6432
0.8
0.8
0.9
1.7
1.7
2.15
2.3
0.5
0.5
0.8
1.2
1.2
1.8
3.0
2.1
2.1
2.6
4.6
4.6
6.1
7.6
0.5
0.8
1.2
1.4
2.4
2.6
3.3
Reflow Soldering(RU, RUK)
This is the recommended land pattern for designing PCB. This pattern does not guarantee any characteristic of other product.
A B C
D
E
Concave type
Example of Land Pattern Design
For Chip Type
For Array Type
Type A B C D E P102P
104P
0.3
0.3
0.3
0.3
0.2
0.2
0.5
0.5
0.4
0.4
0.5
0.5
(UNIT: mm)
The specifications and designs contained herein may be subject to change without notice.Please contact our sales representatives or product engineers before order.
Example of Land Pattern Design
Recommended Soldering Conditions
Since Chip resistors come into direct contact with melted solder during soldering, it is exposed to potential mechanical stress causedby the sudden temperature change. The chip resistors may also be subject to silver migration and flux contamination.
There are 3 soldering methods.- Flow(wave) soldering.- Reflow soldering. (Reflow soldering is broadly divided into the total heating method and local heating method.)- Iron soldering.
Features
PCB
solder
Primary wave Secondary wave
There are two types of soldering methods in flow(wave) soldering.One is single wave soldering, and the other is a double waves soldering. However, double waves soldering is mainly used. Thismethod is designed for continuous andmultiple dipping process byusing primary and secondary wave, having completely differentwaveforms and characteristics.With the primary wave, a comparatively strong jet flow is used to remove the flux gas and to solder.With the secondary wave, it is used to remove excessive solder.With the primary wave, the solder flows into a very small gap between components and air bubbles remaining on the soldered joint are removed.With the secondary wave, the peel back is used to prevent bridging.
PreheatingIf a chip component is heated suddenlyduring soldering, it maycrack by the thermal shock caused bythe temperature difference between the surface and the inside of the chip. To prevent this, a full preheating is necessary. In case of wave soldering, the temperature difference between solder and surface of the component should be kept within 150 . Also when cooling is done by dipping into solvent, care should be taken to keep the temperature difference within 150 .
Standard Soldering ConditionSoldering must be carried out without exceeding the approved soldering temperature and time shown within the shaded area of the graph at right. An excessively long soldering time or high soldering temperature results in leaching of outer terminations.When a PCB is warped, mechanical stress applied to the chip will be increased and might cause chip crack, especially if there is a big amount of solder on the chip. So, care should be taken not to use excessive amount of solder on the PCB.For the flow(wave) soldering, the solder amount can be controlled by land size.
Soldering Methods Reflow Soldering
Total Heating
Local Heating Laser
Wave Soldering Single WaveDouble Waves
Infrared Ray
Iron Soldering
Convection/InfraredHot Air
Hot Plate
Optical BeamAir Heater
< Flow Soldering>
Abstract
Flow(wave) Soldering
Pre-heating
120 sec. min.Time(sec.)
SolderingTemp.()
Pre-heatingTemp.()
Gradual Cooling in the air
260 55 sec. max.
1206(3216) and below:150 max.
T
6
7
OperationNotes
Example of landPattern Design
RecommendedSoldering Conditions
General Structure
General
Low ohms(RUT Series)
Ultra Low ohms(RU Series)
Ultra Low Ohms(RUK Series)
Ultra Low Ohms(RJ Series)
Arrays(CONVEX Type)
Arrays(CONCAVE Type)
Arrays(FLAT Type)
Anti-SulfurResistors
Anti-Sulfur ResistorArrays(Convex Type)
Anti-Sulfur ResistorArrays(Concave Type)
Anti-Sulfur Resistor Arrays (Flat Type)
Automotive Anti-sulfur
Automotive Anti-sulfurArrays (Convex Type)
Attenuator
CharacteristicsPerformance
Packaging
StandardResistance Value
Pre-heating and cooling In the reflow soldering method, a full pre-heating at the proper temperature is necessary to dry and activate solder paste. Tomb-stoning can be reduced by preheating at 150~180 for more than 1 minute. Also when cooling is done by dipping into solvent, care should be taken to keep the temperature differencewithin 150 .
Standard Reflow Soldering ConditionSoldering must be carried out without exceeding the approved soldering temperature and time shown within the shaded area of the right graph. This prevents the terminations from leaching and characteristics from deteriorating. When soldering is repeated, the allowed time is the accumulated time.
Standard solder amountWhen a PCB is warped, mechanical stress applied to the chip should be reduced, and to do so, care should be taken not to useexcessive amount of solder on the PCB. In the case of the reflow method, the thickness of the coated solder paste is controlled to prevent excessive solder. The thickness of solder paste should be 100~300 .
When using a soldering iron or any other soldering operation, the permissible temperature and time should not exceedthat of the reflow soldering. In order to prevent the external terminations from leaching and characteristics from deteriorating, the tip of the soldering iron should not touch the chip component (ceramic element, resin case, etc.). Soldering with a soldering iron and correcting with a soldering iron can be performed right under following conditions.
Temperature at tipSoldering iron outputEnd of soldering iron
Note
350 Max.20-Watt Max.Ø 3mm Max.
Do not directly touch the chip by the tip of the iron.
Item Condition
Ceramic SubstrateInner Electrode
ResistorGlass Coat
Protective CoatTerminal Coat
Ni PlateSn Plate
Al2O3
AgRuO2
Bi2O3, SiO2
Polymer / GlassNi-Cr Alloy /Ag
NiSn
NameNo. Main Substance
< Reflow Soldering>
Tombstoning and PreventionWhen reflow soldering, or especially vapor phase soldering (VPS), small chip components of less than RC3216 type may break away from solder and stand on end. This is commonly known as tombstoning or the Manhattan phenomenon.
- Preventing tombstoningKeep land size as small as possible.Keep the pre-heating conditions properly( Pre-heating temperature : 150 ~ 180°, Pre-heating time : more than 1 min.)Keep the solder paste quantity not too much and uniform for every lands.Keep the position of chips properly.At around the soldering temperature, keep minimum difference of the temperature between the electrodes of a chip.
Reflow Soldering
Iron Soldering
General Structure of the Chip Resistor
Pre-heating
217
SolderingTemp.( )
200
150
Gradual Cooling in the air
260 510 sec. max.
Time(sec.)
The specifications and designs contained herein may be subject to change without notice.Please contact our sales representatives or product engineers before order.
General Structure
General
1 0 0
Very small, thin, and light weight.Both flow and reflow soldering are applicable.Very low inductance.Suitable size and packaging for surface mount assembly.Lead-free terminal. PbO(lead oxide) is included in the glass of our product which is prescribed on RoHS appendix as an exemption.
General purpose.Home Appliances.(DVD, Digital TV, Digital Camera, Audio, Tunner). For Computers & Communications.(Notebook, Memory Module, Mobile, Network Equipment, etc).
The part number system shall be in the following format
RC: Chip Resistor
< Top View > < Side View > < Bottom View >
R C 2 0 1 2 JDimension & Size Code Tolerance
0402: 0.4 0.2() - 01005(inch) 0603: 0.6 0.3() - 0201(inch) 1005: 1.0 0.5() - 0402(inch) 1608: 1.6 0.8() - 0603(inch) 2012: 2.0 1.2() - 0805(inch) 3216: 3.2 1.6() - 1206(inch) 3225: 3.2 2.5() - 1210(inch) 5025: 5.0 2.5() - 2010(inch) 6432: 6.4 3.2() - 2512(inch)
F : 1%D : 0.5%
G : 2% J : 5%
※ Jumper : J ※ Jumper : ‘000’
3 or 4 digits coding system (EIA coding system) 3digits (E-24 series) 4digits (E-96 series)
CSResistance Value Packaging Code
CS: Tape Packaging 7" ES: Tape Packaging 10" AS: Tape Packaging 13"
Feature
Application
Structure and Dimensions
Parts Numbering System
H
B
A
L
W
A
103B
0.20 0.02
0.30 0.03
0.50 0.05
0.80 0.10
1.25 0.15
1.60 0.15
2.55 0.20
2.50 0.20
3.20 0.20
0.13 0.02
0.23 0.03
0.35 0.05
0.45 0.10
0.50 0.10
0.55 0.10
0.55 0.10
0.55 0.10
0.55 0.10
0.10 0.03
0.10 0.05
0.20 0.10
0.30 0.20
0.40 0.20
0.45 0.20
0.45 0.20
0.60 0.20
0.60 0.20
0.10 0.03
0.15 0.05
0.25 0.10
0.30 0.10
0.35 0.20
0.40 0.20
0.40 0.20
0.60 0.20
0.60 0.20
RC0402RC0603RC1005RC1608RC2012RC3216RC3225RC5025RC6432
Type
0100502010402060308051206121020102512
SIZE(Inch) L W H A B
0.40 0.02
0.60 0.03
1.00 0.05
1.60 0.10
2.00 0.15
3.20 0.15
3.20 0.20
5.00 0.20
6.30 0.20
(UNIT: mm)
※ 0402 and smaller size don’t have marking on top of the chips.※ 0603 4-digit models(E-96 series) don’t have making on top of the chips.
8
9
OperationNotes
Example of landPattern Design
RecommendedSoldering Conditions
General Structure
General
Low ohms(RUT Series)
Ultra Low ohms(RU Series)
Ultra Low Ohms(RUK Series)
Ultra Low Ohms(RJ Series)
Arrays(CONVEX Type)
Arrays(CONCAVE Type)
Arrays(FLAT Type)
Anti-SulfurResistors
Anti-Sulfur ResistorArrays(Convex Type)
Anti-Sulfur ResistorArrays(Concave Type)
Anti-Sulfur Resistor Arrays (Flat Type)
Automotive Anti-sulfur
Automotive Anti-sulfurArrays (Convex Type)
Attenuator
CharacteristicsPerformance
Packaging
StandardResistance Value
Please contact our sales representatives or engineers for other specifications
The rated power is the maximum continuous loading power at 70ambient temperature.For ambient temperature above 70, the loading power follows the below power derating curve.
Specification
Power Derating Curve
The specifications and designs contained herein may be subject to change without notice.Please contact our sales representatives or product engineers before order.
- Left 2 digits representsignificant figures.
- Last 1 digit representsexponential number of 10.
- Example: 103Left 2 digits: 10Last 1 digit: 3
103 = 10 103Ω= 10000Ω=10kΩ
No marking types :RC0402, RC0603, RC1005
No marking types :RC0402, RC0603,RC1005, RC1608
3 digits indication(E-24 series)
- Left 3 digits representsignificant figures.
- Last 1 digit representsexponential number of 10.
- Example: 1002Left 3 digits: 100Last 1 digit: 2
1002 = 100 102Ω=10000Ω=10kΩ
4 digits indication(E-96 series)
103 1002
Marking IEC Code System (E-96, E-24)
Jumper Rating
!""!"#!"$!"%!!"!!&!!$!!'!#!!#(!#%!&"!&&!&%!("!(&!(%!$"!$(!$'!)#!)$!)*!%(
!"
!!
!#
!&
!$
!)
E-96 E-24!%'!'#!'%!*!!*)#""#"$#!"#!$##!##)#&##&%#(&#(*#$$#)!#)%#%(#'"#'%#*(&"!&"*
!'
#"
##
#(
#%
&"
E-96 E-24&!)&#(&&#&("&('&$%&)$&%(&'&&*#("#(!#(##(&#((#($&()((%$('%(**$!!$#&$&)$(*
&&
&)
&*
(&
(%
$!
E-96 E-24$)#$%)$*")"()!*)&()(*))$)'!)*'%!$%&#%$"%)'%'%'")'#$'($'))''%*"**&!*$&*%)
$)
)#
)'
%$
'#
*!
E-96 E-24
RC0603
RC1005RC1608RC2012RC3216RC3225RC5025RC6432
RC 0402
Type
0201
0402060308051206121020102512
01005
1/20
1/161/101/81/41/32/31
1/32
25-55~125
70 Level 1
-55~155
5050
150200200200200
15 1 ~ 99100 ~ 1M
300250
300250
300100
1 ~ 9.910 ~ 10M
1 ~ 9.910 ~ 10M
1(F)2(G)5(J)
0.5(D)1(F)2(G)5(J)
Size(inch)
RatedPower
(W)
RatedVoltage
(V)
ResistanceRange
(Ω)Moisture
LevelWorkingTemp.
()
T.C.R(ppm/)
MaxWorkingVoltage
(V)
RatedAmbientTemp.
()
Tolerance(%)
P:Rated Power(W)R:Resistance(Ω)
P R
100
80
60
40
20
0
% R
ated
Pow
er
Ambient Temperature()
-55 70 155
Operation area
-60 -40 -20 20 40 60 80 100 120 140 150 1600
RC0402RC0603
RC1005RC1608RC2012RC3216RC3225RC5025RC6432
0.5
1.0
0.05 Max
2.0
RC0402RC0603RC1005RC1608RC2012RC3216RC3225RC5025RC6432
0100502010402060308051206121020102512
Type Size(inch)
Rated Current(A)
Resistance(Ω)
< Top View > < Side View > < Bottom View >
H
B
A
L
W
A
R100B
L W H A B
Low Ohms(RUT Series)
0.20 0.10
0.30 0.20
0.40 0.20
0.45 0.20
0.45 0.20
0.60 0.20
0.60 0.20
RUT1005
RUT1608
RUT2012
RUT3216
RUT3225
RUT5025
RUT6432
Type SIZE(Inch)
1.00 0.05
1.60 0.10
2.00 0.15
3.20 0.15
3.20 0.20
5.00 0.20
6.30 0.20
(UNIT: mm)
R100
RUT: CurrentSensing Resistor Top Mounting
(Face-up)
Code DesignationRUT 2012 J
Dimension & Size Code Tolerance
1005: 1.0 0.5() - 0402(inch)1608: 1.6 0.8() - 0603(inch)2012: 2.0 1.2() - 0805(inch)3216: 3.2 1.6() - 1206(inch) 3225: 3.2 2.5() - 1210(inch)5025: 5.0 2.5() - 2010(inch)6432: 6.4 3.2() - 2512(inch)
F: 1%G: 2%J: 5%
4-digit coding system
CSResistance Value Packaging Code
CS: Tape & Reel 7" ES : Tape & Reel 10" AS: Tape & Reel 13"
0402
0603
0805
1206
1210
2010
2512
0.50 0.05
0.80 0.10
1.25 0.15
1.60 0.15
2.55 0.20
2.50 0.20
3.20 0.20
0.35 0.05
0.45 0.10
0.50 0.10
0.55 0.10
0.55 0.10
0.55 0.10
0.55 0.10
0.25 0.10
0.30 0.10
0.35 0.20
0.40 0.20
0.40 0.20
0.60 0.20
0.60 0.20
Under 1 ohms, precision resistance.Both flow and reflow soldering are applicable.High Power with Low TCR.100% Lead Free Products (PbO not used).RoHS Complaint.
Current Sensing.PCM of Battery Pack.Power supplying part, DC power charger, adapter.Mobile Phone, HDD, DSC, LCD.
Feature
Application
Structure and Dimensions
The part number system shall be in the following format
Parts Numbering System
10
11
OperationNotes
Example of landPattern Design
RecommendedSoldering Conditions
General Structure
General
Low ohms(RUT Series)
Ultra Low ohms(RU Series)
Ultra Low Ohms(RUK Series)
Ultra Low Ohms(RJ Series)
Arrays(CONVEX Type)
Arrays(CONCAVE Type)
Arrays(FLAT Type)
Anti-SulfurResistors
Anti-Sulfur ResistorArrays(Convex Type)
Anti-Sulfur ResistorArrays(Concave Type)
Anti-Sulfur Resistor Arrays (Flat Type)
Automotive Anti-sulfur
Automotive Anti-sulfurArrays (Convex Type)
Attenuator
CharacteristicsPerformance
Packaging
StandardResistance Value
-55~+155700.1~0.976 150
Type
The rated power is the maximum continuous loading power at 70 ambient temperature.For ambient temperature above 70 , the loading power follows the below power derating curve.
100
80
60
40
20
0
Perc
enta
ge o
f th
e ra
ted
diss
ipat
ion(
%) Operation area
-55
-30 0 30 60 90 120 150
Ambient Temperature( )
70 155
- R means decimal point.- Other digits representthe significant value.
- Example : R100R100 = .100 = 0.100Ω
=0.1Ω or 100
4 digits indication
RUT1005
RUT1608
RUT2012
RUT3216
RUT3225
RUT5025
RUT6432
0402
0603
0805
1206
1210
2010
2512
1/10
1/8
1/4
1/3
1/2
2/3
1
Specification
Resistance Value Table
Power Derating Curve Marking
The specifications and designs contained herein may be subject to change without notice.Please contact our sales representatives or product engineers before order.
Code Tol(%)
Value(Ω Ω Ω Ω Ω Ω)
R100R102R105R107R110R113R115R118R120R121R124R127R130R133R137R140R143R147R150
0.10.1020.1050.1070.110.1130.1150.1180.120.1210.1240.1270.130.1330.1370.140.1430.1470.15
1, 5111
1, 5111
1, 5111
1, 511111
1, 5
Code Tol(%)
Value( )
R154R158R160R162R165R169R174R178R180R182R187R191R196R200R205R210R215R220R221
0.1540.1580.160.1620.1650.1690.1740.1780.1800.1820.1870.1910.1960.2000.2050.210.2150.220.221
11
1, 511111
1, 51111
1, 5111
1, 51
Code Tol(%)
Value( )
R226R232R237R240R243R249R255R261R267R270R274R280R287R294R300R301R309R316R324
0.2260.2320.2370.240.2430.2490.2550.2610.2670.270.2740.280.2870.2940.3
0.3010.3090.3160.324
111
1, 511111
1, 51111
1, 51111
1111
111
1111
1111
111
111
1111
1
1
1
11
1111
1
111
1111
111
Code Tol(%)
Value( )
R330R332R340R348R357R360R365R374R383R390R392R402R412R422R430R432R442R453R464
0.330.3320.340.3480.3570.360.3650.3740.3830.390.3920.4020.4120.4220.430.4320.4420.4530.464
1, 5
1, 5
1, 5
1, 5
Code Tol(%)
Value( )
R470R475R487R499R510R511R523R536R549R560R562R576R590R604R619R620R634R649R665
0.470.4750.4870.4990.510.5110.5230.5360.5490.560.5620.5760.590.6040.6190.620.6340.6490.665
1, 5
1, 5
1, 5
1, 5
Code Tol(%)
Value( )
R680R681R698R715R732R750R768R787R806R820R825R845R866R887R909R910R931R953R976
0.680.6810.6980.7150.7320.750.7680.7870.8060.820.8250.8450.8660.8870.9090.910.9310.9530.976
1, 5
1, 5
1, 5
1, 5
Please contact our sales representatives or engineers for other specifications
Size(inch)
RatedPower
(W)Rated Current
(A)Resistance
(Ω)Working
Temperature()
T.C.R(ppm/)
Rated AmbientTemperature
()
P:Rated Power(W)R:Resistance(Ω)
P R
R100
< Top View > < Side View > < Bottom View >
H
B
A
L
W
A
R010B
Thick Film Type Ultra Low Ohm Resistor.High Precision Reliability.High Power with Low TCR.100% Lead Free Products (PbO not used).RoHS Compliant.
Feature
Ultra Low Ohms(RU Series)
0.25 0.15
0.30 0.20
0.40 0.20
0.45 0.20
0.45 0.20
0.50 0.20
0.50 0.20
RU1005
RU1608
RU2012
RU3216
RU3225
RU5025
RU6432
1.00 0.05
1.60 0.10
2.00 0.15
3.20 0.15
3.20 0.20
5.00 0.20
6.30 0.20
(UNIT: mm)
0402
0603
0805
1206
1210
2010
2512
0.50 0.05
0.80 0.10
1.25 0.15
1.60 0.15
2.55 0.20
2.50 0.20
3.20 0.20
0.35 0.05
0.45 0.10
0.55 0.10
0.60 0.10
0.55 0.10
0.60 0.10
0.60 0.10
0.25 0.15
R 0.05 :0.50 0.20R 0.05 :0.35 0.20
R 0.05 :0.65 0.20R 0.05 :0.40 0.20
R 0.05 :0.90 0.20R 0.05 :0.60 0.20
R 0.05 :1.20 0.20R 0.05 :0.75 0.20
R 0.05 :1.50 0.20R 0.05 :0.90 0.20
R 0.05 :1.90 0.20R 0.05 :1.10 0.25
Current Sensing.PCM of Battery Pack.Power supplying part, DC power charger, adapter.Mobile Phone, Mobile PC, Note PC, HDD, DSC, LCD.
Application
Structure and Dimensions
The part number system shall be in the following format
Parts Numbering System
R051
RU : Currentsensing resistor
Code DesignationR U 2012 F
Dimension & Size Code Tolerance
1005: 1.0 0.5() - 0402(inch)1608: 1.6 0.8() - 0603(inch)2012: 2.0 1.2() - 0805(inch)3216: 3.2 1.6() - 1206(inch)3225: 3.2 2.5() - 1210(inch)5025: 5.0 2.5() - 2010(inch)6432: 6.4 3.2() - 2512(inch)
F: 1%G: 2%J: 5%
4-digit coding system
CSResistance Value Packaging Code
CS: Tape & Reel 7" ES : Tape & Reel 10"AS: Tape & Reel 13"
CSPackaging Code
Type SIZE(Inch) L W H A B
12
13
OperationNotes
Example of landPattern Design
RecommendedSoldering Conditions
General Structure
General
Low ohms(RUT Series)
Ultra Low ohms(RU Series)
Ultra Low Ohms(RUK Series)
Ultra Low Ohms(RJ Series)
Arrays(CONVEX Type)
Arrays(CONCAVE Type)
Arrays(FLAT Type)
Anti-SulfurResistors
Anti-Sulfur ResistorArrays(Convex Type)
Anti-Sulfur ResistorArrays(Concave Type)
Anti-Sulfur Resistor Arrays (Flat Type)
Automotive Anti-sulfur
Automotive Anti-sulfurArrays (Convex Type)
Attenuator
CharacteristicsPerformance
Packaging
StandardResistance Value
The rated power is the maximum continuous loading power at 70 ambient temperature.For ambient temperature above 70, the loading power follows the below power derating curve.
100
80
60
40
20
0
Perc
enta
ge o
f th
e ra
ted
diss
ipat
ion(
%)
Operation area
-55
-30 0 30 60 90 120 150
Ambient Temperature( )
70 155
- R means decimal point.- Other digits representthe significant value.
- Example : R010R010 = .010 = 0.010Ω
= 0.01Ω or 10
4-digit Coding System
R010
Specification
Resistance Value Table
Power Derating Curve Marking
The specifications and designs contained herein may be subject to change without notice.Please contact our sales representatives or product engineers before order.
Code Tol(%)
Value(Ω Ω Ω Ω)
R010R011R012R013R015R016R018
0.0100.0110.0120.0130.0150.0160.018
1, 51, 51, 51, 51, 51, 51, 5
1, 51, 51, 51, 51, 51, 51, 5
1, 51, 51, 51, 51, 51, 5
1, 51, 51, 51, 51, 51, 5
1, 5
Code Tol(%)
Value( )
R020R022R024R027R030R033R036
0.0200.0220.0240.0270.0300.0330.036
Code Tol(%)
Value( )
R039R040R043R047R050R051R056
0.0390.0400.0430.0470.0500.0510.056
Code Tol(%)
Value( )
R062R068R075R082R091R100
0.0620.0680.0750.0820.0910.100
-55~+15570
0.01~0.1
0.02~0.1
Type
RU1005
RU1608
RU2012
RU3216
RU3225
RU5025
RU6432
0402
0603
0805
1206
1210
2010
2512
1/8
1/4
1/3
1/2
2/3
3/4
1
Please contact our sales representatives or engineers for other specifications
Size(inch)
RatedPower
(W)Rated Current
(A)Resistance
(Ω)Working
Temperature()
T.C.R(ppm/)
Rated AmbientTemperature
()
P:Rated Power(W)R:Resistance(Ω)
P R
R 0.047: 500R 0.047: 150
R 0.025: 600R 0.033: 400R 0.033: 150
R 0.025: 500R 0.033: 350R 0.033: 150
Thick Film Type Ultra Low Ohm Resistor.High Precision Reliability.High Power with Very Low TCR.100% Lead Free Products (PbO not used).RoHS Compliant.
Feature
Ultra Low Ohms(RUK Series)
0.35 0.20
0.40 0.20
0.45 0.20
1.15 0.20
RUK1608
RUK2012
RUK3216
RUK6432
1.60 0.10
2.00 0.15
3.20 0.15
6.30 0.20
(UNIT: mm)
R010
RUK : CurrentSensing Resistor
Low TCR
Code DesignationR U K 1608 F
Dimension & Size Code Tolerance
1608: 1.6 0.8() - 0603(inch)2012: 2.0 1.2() - 0805(inch)3216: 3.2 1.6() - 1206(inch)3225: 3.2 2.5() - 1210(inch)5025: 5.0 2.5() - 2010(inch)6432: 6.4 3.2() - 2512(inch)
F: 1%G: 2%J: 5%
4-digits coding system
CSResistance Value Packaging Code
CS: Tape & Reel 7" ES : Tape & Reel 10"AS: Tape & Reel 13"
CSPackaging Code
0603
0805
1206
2512
0.80 0.10
1.25 0.15
1.60 0.15
3.20 0.20
0.45 0.10
0.55 0.10
0.65 0.10
0.65 0.10
0.50 0.20
0.55 0.20
0.90 0.20
0.90 0.20
Current Sensing.PCM of Battery Pack.Power supplying part, DC power charger, adapter.Mobile Phone, Mobile PC, Note PC, HDD, DSC, LCD.
Application
Structure and Dimensions
The part number system shall be in the following format
Parts Numbering System
< Top View > < Side View > < Bottom View >
H
B
A
L
W
A
R010B
Type SIZE(Inch) L W H A B
14
15
OperationNotes
Example of landPattern Design
RecommendedSoldering Conditions
General Structure
General
Low ohms(RUT Series)
Ultra Low ohms(RU Series)
Ultra Low Ohms(RUK Series)
Ultra Low Ohms(RJ Series)
Arrays(CONVEX Type)
Arrays(CONCAVE Type)
Arrays(FLAT Type)
Anti-SulfurResistors
Anti-Sulfur ResistorArrays(Convex Type)
Anti-Sulfur ResistorArrays(Concave Type)
Anti-Sulfur Resistor Arrays (Flat Type)
Automotive Anti-sulfur
Automotive Anti-sulfurArrays (Convex Type)
Attenuator
CharacteristicsPerformance
Packaging
StandardResistance Value
Size(inch)
RatedPower
(W)T.C.R
(ppm/)Rated Current
(A)
Rated AmbientTemperature
()
WorkingTemperature
()
Resistance Value Table
Code
R010R011
R012R013
R015
R016
1, 5
1, 5
1, 51, 5
1, 51, 5
1, 5
1, 5
1, 51, 5
1, 51, 5
Tol(%)Value(Ω)
0.010
0.011
0.0120.013
0.015
0.016
Code Tol(%)Value(Ω)
R018
R020
R022R024
R027R030
0.0180.020
0.0220.024
0.027
0.030
-55 ~ +15570
Type Resistance(Ω)
The rated power is the maximum continuous loading power at 70 ambient temperature.For ambient temperature above 70 , the loading power follows the below power derating curve.
- R means decimal point.- Other digits representsignificant value.
- Example : R010R010 = .010 = 0.010Ω
= 0.01Ω or 10mΩ
4-digits coding system
RUK1608
RUK2012
RUK3216
RUK6432
0603
0805
1206
2512
1/2
1/2
1
1
Specification
Power Derating Curve Marking
The specifications and designs contained herein may be subject to change without notice.Please contact our sales representatives or product engineers before order.
0.01 ~ 0.03
100
80
60
40
20
0
Perc
enta
ge o
f th
e ra
ted
diss
ipat
ion(
%)
Operation area
-55
-30 0 30 60 90 120 150
Ambient Temperature( )
70 155
100
R010
Please contact our sales representatives or engineers for other specifications
P:Rated Power(W)R:Resistance(Ω)
P R
L W H A B
Thick Film Wide Terminal Type.High Precision Reliability.High Power with Low TCR.100% Lead Free Products (PbO not used).RoHS Compliant.
Feature
Ultra Low Ohms(RJ Series)
0.25 0.15
0.30 0.15
0.35 0.20
0.45 0.20
0.60 0.20
RJ0816
RJ1220
RJ1632
RJ2037
RJ3264
Type SIZE(Inch)
0.80 0.10
1.25 0.10
1.60 0.15
2.00 0.15
3.20 0.20
(UNIT: mm)
R010
RJ : Thick FilmWide Terminal
CSR
Code DesignationRJ 0816 F
Dimension & Size Code Tolerance
0816 : 0.8 1.6() - 0306(inch)1220 : 1.2 2.0() - 0508(inch)1632 : 1.6 3.2() - 0612(inch)2037 : 2.0 3.7() - 0815(inch)3264 : 3.2 6.4() - 1225(inch)
F: 1%G: 2%J: 5%
4-digits coding system
CSResistance Value Packaging Code
CS: Tape & Reel 7" ES : Tape & Reel 10"AS: Tape & Reel 13"
CSPackaging Code
0306
0508
0612
0815
1225
1.60 0.10
2.00 0.10
3.20 0.15
3.75 0.15
6.40 0.20
0.45 0.15
0.55 0.15
0.55 0.15
0.55 0.15
0.55 0.15
0.30 0.15
0.35 0.15
0.40 0.20
0.55 0.20
0.60 0.20
Current Sensing.PCM of Battery Pack.DC Power Charger, Adapter.Mobile Phone, Mobile PC, HDD, DSC, LCD.
Application
Structure and Dimensions
The part number system shall be in the following format
Parts Numbering System
< Top View > < Side View > < Bottom View >
L
W
A BBA
H
R010
16
17
OperationNotes
Example of landPattern Design
RecommendedSoldering Conditions
General Structure
General
Low ohms(RUT Series)
Ultra Low ohms(RU Series)
Ultra Low Ohms(RUK Series)
Ultra Low Ohms(RJ Series)
Arrays(CONVEX Type)
Arrays(CONCAVE Type)
Arrays(FLAT Type)
Anti-SulfurResistors
Anti-Sulfur ResistorArrays(Convex Type)
Anti-Sulfur ResistorArrays(Concave Type)
Anti-Sulfur Resistor Arrays (Flat Type)
Automotive Anti-sulfur
Automotive Anti-sulfurArrays (Convex Type)
Attenuator
CharacteristicsPerformance
Packaging
StandardResistance Value
Size(inch)
RatedPower
(W)T.C.R
(ppm/)Rated Current
(A)Rated AmbientTemperature
()
WorkingTemperature
()
-55 ~ +155
Resistance(Ω)
Please contact our sales representatives or engineers for other specifications
P:Rated Power(W)R:Resistance(Ω)
P R
Resistance Value Table
Code Tol(%)
Value(Ω Ω Ω)
R005R006R007R008R009R010R011R012
0.0050.0060.0070.0080.0090.0100.0110.012
1, 51, 51, 51, 51, 51, 51, 51, 5
1, 51, 51, 51, 51, 51, 51, 51, 5
1, 51, 51, 51, 51, 51, 51, 51, 5
Code Tol(%)
Value( )
R013R015R016R018R020R022R024R027
0.0130.0150.0160.0180.0200.0220.0240.027
Code Tol(%)
Value( )
R030R033R036R039R040R043R047R050
0.0300.0330.0360.0390.0400.0430.0470.050
70
Type
The rated power is the maximum continuous loading power at 70 ambient temperature.For ambient temperature above 70 , the loading power follows the below power derating curve.
- R means decimal point.- Other digits representsignificant value.
- Example : R010R010 = .010 = 0.010Ω
= 0.01Ω or 10
4-digits coding system
RJ0816 0306 1/2
RJ1220 0508
RJ1632 0612
RJ2037
RJ3264
0815
1225
1
1/2
1
3/4
1
2
0.005 ~ 0.02
0.005 ~ 0.02
0.021 ~ 0.05
0.005 ~ 0.02
0.021 ~ 0.05
0.005 ~ 0.02
0.005 ~ 0.02
Specification
Power Derating Curve Marking
The specifications and designs contained herein may be subject to change without notice.Please contact our sales representatives or product engineers before order.
100
80
60
40
20
0
Perc
enta
ge o
f th
e ra
ted
diss
ipat
ion(
%)
Operation area
-55
-30 0 30 60 90 120 150
Ambient Temperature( )
70 155
100
100
-200 ~ 0
100
-200 ~ 0
(1)
(1)
(1) RJ0816, RJ3264 are under development (sample available)
R010
Arrays(Convex Type)Arrays(Convex Type)
2 Array 4 Array
W
LC1
W
H
W
LL
W
H
A B
HH
A B
C1 C2
PP
RP102PRP104PRP164P
Type
1.00 0.10
2.00 0.10
3.20 0.10
1.00 0.10
1.00 0.10
1.60 0.10
0.35 0.10
0.35 0.10
0.50 0.10
0.20 0.10
0.20 0.10
0.30 0.15
0.25 0.10 -0.25 0.10
0.30 0.15
0.33 0.10
0.40 0.10
0.60 0.15
0.30 0.10
0.40 0.15
0.65 0.10
0.50 0.10
0.80 0.15
L W H A C1 C2B P
RP: Convex type array
RPCode Designation
10 : 0402 Array16 : 0603 Array
10Dimension
2P: 2 Pieces4P: 4 Pieces
4PResistors
F: 1%G: 2%J : 5%
※ Jumper : J
JTolerance
1 0 0Resistance Value
CS : Tape Packaging 7"ES : Tape Packaging 10" AS : Tape Packaging 13"
CSPackaging Code
The part number system shall be in the following format
Reducing SMD surface area (40% reduced).Reducing SMD costs (75% reduced).Both flow and reflow soldering are applicable.
The product of lead-free terminal is RoHS compliant. PhO(lead oxide) is included in the glass of our product which is prescribed on RoHS appendix as an exception.
For semiconductor devices.For computers, digital circuits.
Feature
Application
Structure and Dimensions
Parts Numbering System
3 digits coding system(E-24 series)
※ Jumper : ‘000’
(UNIT: mm)
150
18
19
OperationNotes
Example of landPattern Design
RecommendedSoldering Conditions
General Structure
General
Low ohms(RUT Series)
Ultra Low ohms(RU Series)
Ultra Low Ohms(RUK Series)
Ultra Low Ohms(RJ Series)
Arrays(CONVEX Type)
Arrays(CONCAVE Type)
Arrays(FLAT Type)
Anti-SulfurResistors
Anti-Sulfur ResistorArrays(Convex Type)
Anti-Sulfur ResistorArrays(Concave Type)
Anti-Sulfur Resistor Arrays (Flat Type)
Automotive Anti-sulfur
Automotive Anti-sulfurArrays (Convex Type)
Attenuator
CharacteristicsPerformance
Packaging
StandardResistance Value
Specification
Please contact our sales representatives or engineers for other specifications
RP102P
RP104P
RP164P
Type
0404
0804
1206
1/16
1/16
1/16
-55~155 70 Level 1
50
50
100
1 ~ 9.910 ~ 1M
300200
1(F)2(G)5(J)
Size(inch)
RatedPower
(W)
RatedVoltage
(V)
ResistanceRange
(Ω)Moisture
LevelWorkingTemp.
()
T.C.R(ppm/)
MaxWorkingVoltage
(V)
RatedAmbientTemp.
()
Tolerance(%)
P:Rated Power(W)R:Resistance(Ω)
P R
The rated power is the maximum continuous loading power at 70 ambient temperature.For ambient temperature above 70, the loading power follows the below power derating curve.
Power Derating Curve Jumper Rating
1.0 0.05 Max
RP102P
RP104P
RP164P
0404
0804
1206
Type Size(inch)
Rated Current(A)
Resistance(Ω)
The specifications and designs contained herein may be subject to change without notice.Please contact our sales representatives or product engineers before order.
Land Pattern
Type A B C D E P1 P2
10AT
102P
104P
164P
0.4
0.4
0.7
0.7
0.4
0.4
0.3
0.5
0.25
0.25
0.2
0.3
0.5
0.5
0.5
0.9
0.5
0.5
0.5
0.8
0.65
0.65
0.55
0.9
-
0.5
0.8
P
A B
E
D: Land Pattern
: Chip Resistor
100
80
60
40
20
0
Perc
enta
ge o
f th
e ra
ted
diss
ipat
ion(
%) Operation area
-55
-30 0 30 60 90 120 150
Ambient Temperature( )
70 155
C
Arrays(Concave Type)
Strong Body.Both flow and reflow soldering are applicable.Concave Type Terminal.
The product of lead-free terminal is RoHS compliant. PhO(lead oxide) is included in the glass of our product which is prescribed on RoHS appendix as an exception.
For semiconductor devices.For computers, digital circuits.
Feature
Application
Structure and Dimensions
(2) Inverted Concave Type
(3) Short-free & Inverted Concave Type
W
H PL
L
C2
H P
RN102PRN104P
Type
1.00 0.10
2.00 0.10
L
0.35 0.10
0.40 0.10
1.00 0.10
1.00 0.10
H
0.15 0.10
0.15 0.10
A
0.25 0.10
0.25 0.10
B
0.33 0.10
0.30 0.10
C1
-0.30 0.10
C2
0.50 0.10
0.50 0.10
PW
(UNIT: mm)
RM102PRM104P
Type
1.00 0.10
2.00 0.10
L
0.35 0.10
0.40 0.10
1.00 0.10
1.00 0.10
H
0.15 0.10
0.15 0.10
A
0.25 0.10
0.25 0.10
B
0.33 0.10
0.30 0.10
C1
-0.30 0.10
C2
0.50 0.10
0.50 0.10
PW
(UNIT: mm)
RK102PRK104P
Type
1.00 0.10
2.00 0.10
L
0.35 0.10
0.40 0.10
1.00 0.10
1.00 0.10
H
--
A
0.25 0.10
0.25 0.10
B
0.33 0.10
0.30 0.10
C1
-0.30 0.10
C2
0.50 0.10
0.50 0.10
PW
(UNIT: mm)
(1) Concave Type
W
H PL C2
C1
C1 C2
C1
W
B
BA
A
B
< Top View > < Side View > < Bottom View >
< Top View > < Side View > < Bottom View >
< Top View > < Side View > < Bottom View >
150
150
20
21
OperationNotes
Example of landPattern Design
RecommendedSoldering Conditions
General Structure
General
Low ohms(RUT Series)
Ultra Low ohms(RU Series)
Ultra Low Ohms(RUK Series)
Ultra Low Ohms(RJ Series)
Arrays(CONVEX Type)
Arrays(CONCAVE Type)
Arrays(FLAT Type)
Anti-SulfurResistors
Anti-Sulfur ResistorArrays(Convex Type)
Anti-Sulfur ResistorArrays(Concave Type)
Anti-Sulfur Resistor Arrays (Flat Type)
Automotive Anti-sulfur
Automotive Anti-sulfurArrays (Convex Type)
Attenuator
CharacteristicsPerformance
Packaging
StandardResistance Value
RN : Concave Type ArrayRM : Inverted Type ArrayRK : Short Free & Inverted Type
RNCode Designation
10: 0402 Array
10Dimension
2P: 2 Pieces4P: 4 Pieces
4PResistors
F: 1%J: 5%
JTolerance
3 digit coding system (EIA coding system) E-24 series
1 0 0Resistance Value
CS : Tape & Reel 7"ES : Tape & Reel 10" AS : Tape & Reel 13"
CSPackaging Code
The part number system shall be in the following format
Parts Numbering System
The specifications and designs contained herein may be subject to change without notice.Please contact our sales representatives or product engineers before order.
Land Pattern
Type A B C D E P102P
104P
0.3
0.3
0.3
0.3
0.2
0.2
0.5
0.5
0.4
0.4
0.5
0.5
: Land Pattern
: Chip Resistor
P
A B
E
D
Specification
※ Jumper : J※ Jumper : ‘000’
Please contact our sales representatives or engineers for other specifications
102P
104P
Type
0404
0804
1/16
1/16-55~155 70 Level 1
25
251 ~ 1M 200
1(F)2(G)5(J)
Size(inch)
RatedPower
(W)
RatedVoltage
(V)
ResistanceRange
(Ω)Moisture
LevelWorkingTemp.
()
T.C.R(ppm/)
MaxWorkingVoltage
(V)
RatedAmbientTemp.
()
Tolerance(%)
P:Rated Power(W)R:Resistance(Ω)
P R
The rated power is the maximum continuous loading power at 70 ambient temperature.For ambient temperature above 70, the loading power follows the below power derating curve.
Power Derating Curve Jumper Rating
1.0 0.05 Max102P
104P
0404
0804
Type Size(inch)
Rated Current(A)
Resistance(Ω)
100
80
60
40
20
0
Perc
enta
ge o
f th
e ra
ted
diss
ipat
ion(
%) Operation area
-55
-30 0 30 60 90 120 150
Ambient Temperature( )
70 155
C
RF062PRF064P
Type
0.80 0.05
1.40 0.05
L
0.23 0.10
0.23 0.10
0.60 0.05
0.60 0.05
H
0.15 0.10
0.15 0.10
A
0.20 0.10
0.20 0.10
B
0.25 0.10
0.25 0.10
C1
-0.25 0.10
C2
0.50 0.10
0.40 0.10
PW
(UNIT: mm)
RM062PRM064P
Type
0.80 0.05
1.40 0.05
L
0.23 0.10
0.23 0.10
0.60 0.05
0.60 0.05
H
0.15 0.10
0.15 0.10
A
0.20 0.10
0.20 0.10
B
0.25 0.10
0.25 0.10
C1
-0.25 0.10
C2
0.50 0.10
0.40 0.10
PW
(UNIT: mm)
Arrays(Flat Type)
Very Small Array.Stable and Accurate Resistance.Flat Type Terminal.
The product of lead-free terminal is RoHS compliant. PhO(lead oxide) is included in the glass of our product which is prescribed on RoHS appendix as an exception.
For semiconductor devices.For computers, digital circuits.
Feature
Application
Structure and Dimensions
L C1
P
H
W
L
W
C2 P
D
D
C1
A B
A
(1) Flat Type Array
(2) Inverted Type Array
H
B
L C1
P
H
W
L
W
C2 P
D
D
C1
A B
A
H
B
22
23
OperationNotes
Example of landPattern Design
RecommendedSoldering Conditions
General Structure
General
Low ohms(RUT Series)
Ultra Low ohms(RU Series)
Ultra Low Ohms(RUK Series)
Ultra Low Ohms(RJ Series)
Arrays(CONVEX Type)
Arrays(CONCAVE Type)
Arrays(FLAT Type)
Anti-SulfurResistors
Anti-Sulfur ResistorArrays(Convex Type)
Anti-Sulfur ResistorArrays(Concave Type)
Anti-Sulfur Resistor Arrays (Flat Type)
Automotive Anti-sulfur
Automotive Anti-sulfurArrays (Convex Type)
Attenuator
CharacteristicsPerformance
Packaging
StandardResistance Value
The part number system shall be in the following format
Parts Numbering System
Specification
Please contact our sales representatives or engineers for other specifications
062P
064P
Type
0302
0502
1/32
1/32-55~125 70 Level 1
12.5
12.51 ~ 1M 2005(J)
Size(inch)
RatedPower
(W)
RatedVoltage
(V)
ResistanceRange
(Ω)Moisture
LevelWorkingTemp.
()
T.C.R(ppm/)
MaxWorkingVoltage
(V)
RatedAmbientTemp.
()
Tolerance(%)
P:Rated Power(W)R:Resistance(Ω)
P R
The rated power is the maximum continuous loading power at 70 ambient temperature.For ambient temperature above 70, the loading power follows the below power derating curve.
Power Derating Curve Jumper Rating
0.5 0.05 Max062P
064P
0302
0502
Type Size(inch)
Rated Current(A)
Resistance(Ω)
100
80
60
40
20
0
Perc
enta
ge o
f th
e ra
ted
diss
ipat
ion(
%) Operation area
-55
-40 0 40 80 120
Ambient Temperature( )
70 125
Land Pattern
The specifications and designs contained herein may be subject to change without notice.Please contact our sales representatives or product engineers before order.
RF : Flat Type ArrayRM : Inverted Type Array
RFCode Designation
06: 0201 Array
06Dimension
2P: 2 Pieces4P: 4 Pieces
4PResistors
J: 5%
JTolerance
3 digit coding system (EIA coding system)
E-24 series
150Resistance Value
CS : Tape & Reel 7"ES : Tape & Reel 10" AS : Tape & Reel 13"
CSPackaging Code
Dimension A B 2A + B C D062P
064P
0.3
0.3
0.3
0.3
0.9
0.9
0.2
0.2
0.3
0.2
TYPE (Inch) Reflow Soldering
A
B
A
A
B
A
CC DC D C
: Land Pattern
: Chip Resistor
※ Jumper : J※ Jumper : ‘000’
Anti-Sulfur Resistors
Stable in the Sulfur Atmosphere.ASTM B809-95 SatisfiedPassed 720hrs with the dried Sulfur at 105 .High Precision Reliability.RoHS Compliant.
Electronic Devices with long-term reliability.Server System (Memory Module / HDD).Network Equipment.
Feature
Application
1 0 0
The part number system shall be in the following format
RCS: Anti-sulfur General Type
Code DesignationR C S 2 0 1 2 J
Dimension & Size Code Tolerance
0603: 0.6 0.3() - 0201(inch) 1005: 1.0 0.5() - 0402(inch) 1608: 1.6 0.8() - 0603(inch) 2012: 2.0 1.2() - 0805(inch) 3216: 3.2 1.6() - 1206(inch) 3225: 3.2 2.5() - 1210(inch) 5025: 5.0 2.5() - 2010(inch)6432: 6.4 3.2() - 2512(inch)
3 or 4 digits coding system (EIA coding system) 3digits (E-24 series) 4digits (E-96 series)
CSResistance Value Packaging Code
CS: Tape & Reel 7" ES: Tape & Reel 10" AS: Tape & Reel 13"
Parts Numbering System
Structure and Dimensions
L
< Top View > < Side View > < Bottom View >
HW
B
A
BA
L W H A B
RCS0603
RCS1005
RCS1608
RCS2012
RCS3216
Type SIZE(Inch)
(UNIT: mm)
0201
0402
0603
0805
1206
0.15 0.05
0.25 0.10
0.30 0.10
0.35 0.20
0.40 0.20
RCS3225
RCS5025
1210
2010
0.40 0.20
0.60 0.20
0.15 0.05
0.22 0.10
0.30 0.20
0.40 0.20
0.45 0.20
0.45 0.20
0.60 0.20
0.23 0.03
0.35 0.05
0.45 0.10
0.55 0.10
0.55 0.10
0.55 0.10
0.55 0.10
0.30 0.03
0.50 0.05
0.80 0.15
1.25 0.15
1.60 0.15
2.55 0.20
2.50 0.20
0.60 0.03
1.00 0.05
1.60 0.10
2.00 0.20
3.20 0.20
3.20 0.20
5.00 0.20
RCS6432 2512 0.60 0.200.60 0.200.55 0.103.20 0.206.30 0.20
F: 1%D: 0.5%
G: 2%J: 5%
※ Jumper : J ※ Jumper : ‘000’
24
25
OperationNotes
Example of landPattern Design
RecommendedSoldering Conditions
General Structure
General
Low ohms(RUT Series)
Ultra Low ohms(RU Series)
Ultra Low Ohms(RUK Series)
Ultra Low Ohms(RJ Series)
Arrays(CONVEX Type)
Arrays(CONCAVE Type)
Arrays(FLAT Type)
Anti-SulfurResistors
Anti-Sulfur ResistorArrays(Convex Type)
Anti-Sulfur ResistorArrays(Concave Type)
Anti-Sulfur Resistor Arrays (Flat Type)
Automotive Anti-sulfur
Automotive Anti-sulfurArrays (Convex Type)
Attenuator
CharacteristicsPerformance
Packaging
StandardResistance Value
Specification
Test name AddingMaterial Temp. Duration
TimeDecisionCriteria
ASTMB 809-95
Dry Sulfur(IBM recommended)
Sulfur 50 gKNO3 200 gDI water 200ml
Sulfur 50 g
Sulfur Corrosion Test
Desiccator(15 Liter)
Sulfur
KNO3
Hanger(PCB Holder)
50
105
720hrs
720hrs
[ Test Equipment ]
R 1%
R 1%
Please contact our sales representatives or engineers for other specifications
RCS0603
RCS1005
Type
0201
0402
1/20
1/16
-55~125
70 Level 1
25
50
RCS1608 0603 1/10 50
RCS2012 0805 1/8 150
RCS3216 1206 1/4 200
RCS3225 1210 1/3 200
RCS5025 2010 2/3 200
RCS6432 2516 1 200
1 ~ 9.910 ~ 10M
300250
1(F)2(G)5(J)
-55~1551 ~ 9.910 ~ 10M
300100
0.5(D)1(F)2(G)5(J)
Size(inch)
RatedPower
(W)
RatedVoltage
(V)
ResistanceRange
(Ω)Moisture
LevelWorkingTemp.
()
T.C.R(ppm/)
MaxWorkingVoltage
(V)
RatedAmbientTemp.
()
Tolerance(%)
P:Rated Power(W)R:Resistance(Ω)
P R
The rated power is the maximum continuous loading power at 70ambient temperature.For ambient temperature above 70, the loading power follows the below power derating curve.
Power Derating Curve Jumper Rating
100
80
60
40
20
0
% R
ated
Pow
er
Ambient Temperature()
-55 70 155
Operation area
-60 -40 -20 20 40 60 80 100 120 140 150 1600
RCS0603
RCS1005RCS1608RCS2012RCS3216RCS3225RCS5025RCS6432
0.5
1.0
0.05 Max
2.0
RCS0603RCS1005RCS1608RCS2012RCS3216RCS3225RCS5025RCS6432
02010402060308051206121020102512
Type Size(inch)
Rated Current(A)
Resistance(Ω)
Anti-Sulfur Resistor Arrays(Convex Type)
.
Feature
Application
2 Array 4 Array
W
LC1
W
p
H
W
LL
W
p
H
A B
HH
A B
C1 C2
P
RPS102PRPS104PRPS164P
Type
1.00 0.10
2.00 0.10
3.20 0.10
1.00 0.10
1.00 0.10
1.60 0.10
0.35 0.10
0.35 0.10
0.50 0.10
0.20 0.10
0.20 0.10
0.30 0.15
0.25 0.10 -0.25 0.10
0.30 0.15
0.33 0.10
0.40 0.10
0.60 0.15
0.30 0.10
0.40 0.15
0.65 0.10
0.50 0.10
0.80 0.15
L W H A C1 C2B P
RPS : Anti-Sulfur Array (Convex Type)
RPSCode Designation
10 : 0402 Array16 : 0603 Array
10Dimension
2P: 2 Pieces4P: 4 Pieces
4PResistors
F: 1%G: 2%J : 5%
※ Jumper : J
JTolerance
1 0 0Resistance Value
CS : Tape Packaging 7"ES : Tape Packaging 10" AS : Tape Packaging 13"
CSPackaging Code
The part number system shall be in the following format
Structure and Dimensions
Parts Numbering System
※ Jumper : ‘000’
3 or 4 digits coding system (EIA coding system) 3digits (E-24 series) 4digits (E-96 series)
(UNIT: mm)
Stable in the Sulfur Atmosphere.ASTM SatisfiedPassed 720hrs with the dried Sulfur at 105High Precision Reliability.RoHS Compliant.
Electronic Devices with long-term reliability.Server System (Memory Module / HDD).Network Equipment.Automotive ECU parts
26
27
OperationNotes
Example of landPattern Design
RecommendedSoldering Conditions
General Structure
General
Low ohms(RUT Series)
Ultra Low ohms(RU Series)
Ultra Low Ohms(RUK Series)
Ultra Low Ohms(RJ Series)
Arrays(CONVEX Type)
Arrays(CONCAVE Type)
Arrays(FLAT Type)
Anti-SulfurResistors
Anti-Sulfur ResistorArrays(Convex Type)
Anti-Sulfur ResistorArrays(Concave Type)
Anti-Sulfur Resistor Arrays (Flat Type)
Automotive Anti-sulfur
Automotive Anti-sulfurArrays (Convex Type)
Attenuator
CharacteristicsPerformance
Packaging
StandardResistance Value
Specification
Please contact our sales representatives or engineers for other specifications
RPS102P
RPS104P
RPS164P
Type
0404
0804
1206
1/16
1/16
1/16
-55~155 70 Level 1
50
50
100
1 ~ 9.910 ~ 1M
300200
1(F)2(G)5(J)
Size(inch)
RatedPower
(W)
RatedVoltage
(V)
ResistanceRange
(Ω)Moisture
LevelWorkingTemp.
()
T.C.R(ppm/)
MaxWorkingVoltage
(V)
RatedAmbient
Temp.()
Tolerance(%)
P:Rated Power(W)R:Resistance(Ω)
P R
The rated power is the maximum continuous loading power at 70 ambient temperature.For ambient temperature above 70, the loading power follows the below power derating curve.
Power Derating Curve Jumper Rating
1.0 0.05 Max
RPS102P
RPS104P
RPS164P
0404
0804
1206
Type Size(inch)
Rated Current(A)
Resistance(Ω)
The specifications and designs contained herein may be subject to change without notice.Please contact our sales representatives or product engineers before order.
Land Pattern
Type A B C D E P1 P2
102P
104P
164P
0.4
0.7
0.7
0.4
0.3
0.5
0.25
0.2
0.3
0.5
0.5
0.9
0.5
0.5
0.8
0.65
0.55
0.9
-
0.5
0.8
P
A B
E
D: Land Pattern
: Chip Resistor
100
80
60
40
20
0
Perc
enta
ge o
f th
e ra
ted
diss
ipat
ion(
%) Operation area
-55
-30 0 30 60 90 120 150
Ambient Temperature( )
70 155
C
Anti-Sulfur Resistor Arrays(Concave Type)
Stable in the Sulfur Atmosphere.ASTM SatisfiedPassed 720hrs with the dried Sulfur at 105 .High Precision Reliability.RoHS Compliant.
Electronic Devices with long-term reliability.Server System (Memory Module / HDD).Network Equipment.Automotive ECU parts
Feature
Application
Structure and Dimensions
(2) Inverted Concave Type
(3) Short-free & Inverted Concave Type
W
H PL
L
C2
H P
RNS102PRNS104P
Type
1.00 0.10
2.00 0.10
L
0.35 0.10
0.40 0.10
1.00 0.10
1.00 0.10
H
0.15 0.10
0.15 0.10
A
0.25 0.10
0.25 0.10
B
0.33 0.10
0.30 0.10
C1
-0.30 0.10
C2
0.50 0.10
0.50 0.10
PW
(UNIT: mm)
RMS102PRMS104P
Type
1.00 0.10
2.00 0.10
L
0.35 0.10
0.40 0.10
1.00 0.10
1.00 0.10
H
0.15 0.10
0.15 0.10
A
0.25 0.10
0.25 0.10
B
0.33 0.10
0.30 0.10
C1
-0.30 0.10
C2
0.50 0.10
0.50 0.10
PW
(UNIT: mm)
RKS102PRKS104P
Type
1.00 0.10
2.00 0.10
L
0.35 0.10
0.40 0.10
1.00 0.10
1.00 0.10
H
--
A
0.25 0.10
0.25 0.10
B
0.33 0.10
0.30 0.10
C1
-0.30 0.10
C2
0.50 0.10
0.50 0.10
PW
(UNIT: mm)
(1) Concave Type
W
H PL C2
C1
C1 C2
C1
W
1
B
BA
A
A
< Top View > < Side View > < Bottom View >
< Top View > < Side View > < Bottom View >
< Top View > < Side View > < Bottom View >
OperationNotes
Example of landPattern Design
RecommendedSoldering Conditions
General Structure
General
Low ohms(RUT Series)
Ultra Low ohms(RU Series)
Ultra Low Ohms(RUK Series)
Ultra Low Ohms(RJ Series)
Arrays(CONVEX Type)
Arrays(CONCAVE Type)
Arrays(FLAT Type)
Anti-SulfurResistors
Anti-Sulfur ResistorArrays(Convex Type)
Anti-Sulfur ResistorArrays(Concave Type)
Anti-Sulfur Resistor Arrays (Flat Type)
Automotive Anti-sulfur
Automotive Anti-sulfurArrays (Convex Type)
Attenuator
CharacteristicsPerformance
Packaging
StandardResistance Value
28
29
Parts Numbering System
The specifications and designs contained herein may be subject to change without notice.Please contact our sales representatives or product engineers before order.
Land Pattern
Type A B C D E P 102P
104P
0.3
0.3
0.3
0.3
0.2
0.2
0.5
0.5
0.4
0.4
0.5
0.5
: Land Pattern
: Chip Resistor
Specification
Please contact our sales representatives or engineers for other specifications
102P
104P
Type
0404
0804
1/16
1/16-55~155 70 Level 1
25
251 ~ 1M 200
1(F)2(G)5(J)
Size(inch)
RatedPower
(W)
RatedVoltage
(V)
ResistanceRange
(Ω)Moisture
LevelWorking
Temp.()
T.C.R(ppm/)
MaxWorkingVoltage
(V)
RatedAmbientTemp.
()
Tolerance(%)
P:Rated Power(W)R:Resistance(Ω)
P R
The rated power is the maximum continuous loading power at 70 ambient temperature.For ambient temperature above 70, the loading power follows the below power derating curve.
Power Derating Curve Jumper Rating
1.0 0.05 Max102P
104P
0404
0804
Type Size(inch)
Rated Current(A)
Resistance(Ω)
100
80
60
40
20
0
Perc
enta
ge o
f th
e ra
ted
diss
ipat
ion(
%) Operation area
-55
-30 0 30 60 90 120 150
Ambient Temperature( )
70 155
RNS : Anti-sulfur Array (Concave Type)RMS : Anti-sulfur Array (Inverted Concave)RKS : Anti-sulfur Array (Short-free & Inverted)
RMSCode Designation
10: 0402 Array
10Dimension
2P: 2 Pieces4P: 4 Pieces
4PResistors
JTolerance
1 0 0Resistance Value
CS : Tape & Reel 7"ES : Tape & Reel 10" AS : Tape & Reel 13"
CSPackaging Code
The part number system shall be in the following format
F: 1%J: 5%
※ Jumper : J
3 digit coding system (EIA coding system) E-24 series※ Jumper : ‘000’
P
A B
E
D
C
Anti-Sulfur Resistor Arrays (Flat Type)
Stable in the Sulfur Atmosphere.ASTM SatisfiedPassed 720hrs with the dried Sulfur at 105 .High Precision Reliability.RoHS Compliant.
Electronic Devices with long-term reliability.Server System (Memory Module / HDD).Network Equipment.Automotive ECU parts
Feature
Application
RFS062PRFS064P
Type
0.80 0.05
1.40 0.05
L
0.23 0.10
0.23 0.10
0.60 0.05
0.60 0.05
H
0.15 0.10
0.15 0.10
A
0.20 0.10
0.20 0.10
B
0.25 0.10
0.25 0.10
C1
-0.25 0.10
C2
0.50 0.10
0.40 0.10
PW
(UNIT: mm)
RFS062PRFS064P
Type
0.80 0.05
1.40 0.05
L
0.23 0.10
0.23 0.10
0.60 0.05
0.60 0.05
H
0.15 0.10
0.15 0.10
A
0.20 0.10
0.20 0.10
B
0.25 0.10
0.25 0.10
C1
-0.25 0.10
C2
0.50 0.10
0.40 0.10
PW
(UNIT: mm)
Structure and Dimensions
L C1
P
H
W
L
W
C2 P
D
D
C1
A B
A
(1) Flat Type Array
(2) Inverted Type Array
H
B
L C1
P
H
W
L
W
C2 P
D
D
C1
A B
A
H
B
30
31
OperationNotes
Example of landPattern Design
RecommendedSoldering Conditions
General Structure
General
Low ohms(RUT Series)
Ultra Low ohms(RU Series)
Ultra Low Ohms(RUK Series)
Ultra Low Ohms(RJ Series)
Arrays(CONVEX Type)
Arrays(CONCAVE Type)
Arrays(FLAT Type)
Anti-SulfurResistors
Anti-Sulfur ResistorArrays(Convex Type)
Anti-Sulfur ResistorArrays(Concave Type)
Anti-Sulfur Resistor Arrays (Flat Type)
Automotive Anti-sulfur
Automotive Anti-sulfurArrays (Convex Type)
Attenuator
CharacteristicsPerformance
Packaging
StandardResistance Value
The part number system shall be in the following format
Parts Numbering System
Specification
Please contact our sales representatives or engineers for other specifications
062P
064P
Type
0302
0502
1/32
1/32-55~125 70 Level 1
12.5
12.51 ~ 1M 2005(J)
Size(inch)
RatedPower
(W)
RatedVoltage
(V)
ResistanceRange
(Ω)Moisture
LevelWorkingTemp.
()
T.C.R(ppm/)
MaxWorkingVoltage
(V)
RatedAmbientTemp.
()
Tolerance(%)
P:Rated Power(W)R:Resistance(Ω)
P R
The rated power is the maximum continuous loading power at 70 ambient temperature.For ambient temperature above 70, the loading power follows the below power derating curve.
Power Derating Curve Jumper Rating
0.5 0.05 Max062P
064P
0302
0502
Type Size(inch)
Rated Current(A)
Resistance(Ω)
100
80
60
40
20
0
Perc
enta
ge o
f th
e ra
ted
diss
ipat
ion(
%) Operation area
-55
-40 0 40 80 120
Ambient Temperature( )
70 125
RFS : Anti-sulfur Array (Flat Type)RMS : Anti-sulfur Array (Inverted & Flat Type)
RFSCode Designation
06: 0201 Array
06Dimension
2P: 2 Pieces4P: 4 Pieces
4PResistors
J: 5%
JTolerance
3 digit coding system (EIA coding system)
E-24 series
150Resistance Value
CS : Tape & Reel 7"ES : Tape & Reel 10" AS : Tape & Reel 13"
CSPackaging Code
※ Jumper : J※ Jumper : ‘000’
Land Pattern
The specifications and designs contained herein may be subject to change without notice.Please contact our sales representatives or product engineers before order.
Dimension A B 2A + B C D062P
064P
0.3
0.3
0.3
0.3
0.9
0.9
0.2
0.2
0.3
0.2
TYPE (Inch) Reflow Soldering
A
B
A
A
B
A
CC DC D C
: Land Pattern
: Chip Resistor
Automotive Anti-sulfur
1 0 0
AEC-Q200 Qualified.ASTM B809-95 satisfied. Excellent anti-sulfur performance.Lead-free terminal (matt tin)RoHS complaint with exemption.
Electronic Control Units of Automotive PartsAutomotive grade applicationsInfotainment applications for car.
The part number system shall be in the following format
RCM : Automotive Chip Resistor
< Top View > < Side View > < Bottom View >
RCM 2 0 1 2 JDimension & Size Code Tolerance
0603: 0.6 0.3() - 0201(inch) 1005: 1.0 0.5() - 0402(inch) 1608: 1.6 0.8() - 0603(inch) 2012: 2.0 1.2() - 0805(inch) 3216: 3.2 1.6() - 1206(inch) 3225: 3.2 2.5() - 1210(inch) 5025: 5.0 2.5() - 2010(inch) 6432: 6.4 3.2() - 2512(inch)
F : 1%G : 2% J : 5%
※ Jumper : J※ Jumper : ‘000’
3 or 4 digits coding system (EIA coding system) 3digits (E-24 series) 4digits (E-96 series)
CSResistance Value Packaging Code
CS: Tape Packaging 7" ES: Tape Packaging 10" AS: Tape Packaging 13"
Feature
Application
Structure and Dimensions
Parts Numbering System
H
B
A
L
W
A
103B
0.30 0.03
0.50 0.05
0.80 0.10
1.25 0.15
1.60 0.15
2.55 0.20
2.50 0.20
3.20 0.20
0.23 0.03
0.35 0.05
0.45 0.10
0.50 0.10
0.55 0.10
0.55 0.10
0.55 0.10
0.55 0.10
0.10 0.05
0.20 0.10
0.30 0.20
0.40 0.20
0.45 0.20
0.45 0.20
0.60 0.20
0.60 0.20
0.15 0.05
0.25 0.10
0.30 0.10
0.35 0.20
0.40 0.20
0.40 0.20
0.60 0.20
0.60 0.20
RCM0603RCM1005RCM1608RCM2012RCM3216RCM3225RCM5025RCM6432
Type
02010402060308051206121020102512
SIZE(Inch) L W H A B
0.60 0.03
1.00 0.05
1.60 0.10
2.00 0.15
3.20 0.15
3.20 0.20
5.00 0.20
6.30 0.20
(UNIT: mm)
※ 0402 and smaller size don’t have marking on top of the chips.※ 0603 4-digit models(E-96 series) don’t have making on top of the chips.
32
33
OperationNotes
Example of landPattern Design
RecommendedSoldering Conditions
General Structure
General
Low ohms(RUT Series)
Ultra Low ohms(RU Series)
Ultra Low Ohms(RUK Series)
Ultra Low Ohms(RJ Series)
Arrays(CONVEX Type)
Arrays(CONCAVE Type)
Arrays(FLAT Type)
Anti-SulfurResistors
Anti-Sulfur ResistorArrays(Convex Type)
Anti-Sulfur ResistorArrays(Concave Type)
Anti-Sulfur Resistor Arrays (Flat Type)
Automotive Anti-sulfur
Automotive Anti-sulfurArrays (Convex Type)
Attenuator
CharacteristicsPerformance
Packaging
StandardResistance Value
Please contact our sales representatives or engineers for other specifications
The rated power is the maximum continuous loading power at 70ambient temperature.For ambient temperature above 70, the loading power follows the below power derating curve.
Specification
Power Derating Curve
The specifications and designs contained herein may be subject to change without notice.Please contact our sales representatives or product engineers before order.
- Left 2 digits representsignificant figures.
- Last 1 digit representsexponential number of 10.
- Example: 103Left 2 digits: 10Last 1 digit: 3
103 = 10 103Ω= 10000Ω=10kΩ
No marking types for 3-digit models : RC0402, RC0603, RC1005
No marking types for 4-digit models : RC0402, RC0603, RC1005, RC1608
3 digits indication(E-24 series)
- Left 3 digits representsignificant figures.
- Last 1 digit representsexponential number of 10.
- Example: 1002Left 3 digits: 100Last 1 digit: 2
1002 = 100 102Ω=10000Ω=10kΩ
4 digits indication(E-96 series)
103 1002
Marking IEC Code System (E-96, E-24)
Jumper Rating
!""!"#!"$!"%!!"!!&!!$!!'!#!!#(!#%!&"!&&!&%!("!(&!(%!$"!$(!$'!)#!)$!)*!%(
!"
!!
!#
!&
!$
!)
E-96 E-24!%'!'#!'%!*!!*)#""#"$#!"#!$##!##)#&##&%#(&#(*#$$#)!#)%#%(#'"#'%#*(&"!&"*
!'
#"
##
#(
#%
&"
E-96 E-24&!)&#(&&#&("&('&$%&)$&%(&'&&*#("#(!#(##(&#((#($&()((%$('%(**$!!$#&$&)$(*
&&
&)
&*
(&
(%
$!
E-96 E-24$)#$%)$*")"()!*)&()(*))$)'!)*'%!$%&#%$"%)'%'%'")'#$'($'))''%*"**&!*$&*%)
$)
)#
)'
%$
'#
*!
E-96 E-24
RCM0603
RCM1005RCM1608RCM2012RCM3216RCM3225RCM5025RCM6432
Type
0201
0402060308051206121020102512
1/20
1/161/101/81/41/32/31
25 -55~125
70 Level 1
-55~155
5050
150200200200200
300250
300100
1 ~ 9.910 ~ 10M
1 ~ 9.910 ~ 10M
1(F)2(G)5(J)
0.5(D)1(F)2(G)5(J)
Size(inch)
RatedPower
(W)
RatedVoltage
(V)
ResistanceRange
(Ω)Moisture
LevelWorkingTemp.
()
T.C.R(ppm/)
MaxWorkingVoltage
(V)
RatedAmbientTemp.
()
Tolerance(%)
P:Rated Power(W)R:Resistance(Ω)
P R
100
80
60
40
20
0
% R
ated
Pow
er
Ambient Temperature()
-55 70 155
Operation area
-60 -40 -20 20 40 60 80 100 120 140 150 1600
RCM0603
RCM1005RCM1608RCM2012RCM3216RCM3225RCM5025RCM6432
0.5
1.0
0.05 Max
2.0
RCM0603RCM1005RCM1608RCM2012RCM3216RCM3225RCM5025RCM6432
02010402060308051206121020102512
Type Size(inch)
Rated Current(A)
Resistance(A)
Automotive Anti-sulfur Arrays (Convex Type)
2 Array 4 Array
W
LC1
W
p
H
W
LL
W
p
H
A B
HH
A B
C1 C2
P
RPM102PRPM104PRPM164P
Type
1.00 0.10
2.00 0.10
3.20 0.10
1.00 0.10
1.00 0.10
1.60 0.10
0.35 0.10
0.35 0.10
0.50 0.10
0.25 0.10
0.25 0.10
0.30 0.15
0.25 0.10 -0.25 0.10
0.30 0.15
0.33 0.10
0.40 0.10
0.60 0.15
0.30 0.10
0.40 0.15
0.65 0.10
0.50 0.10
0.80 0.15
L W H A C1 C2B P
RPM : Automotive Anti-sulfur Array (Convex Type)
RPMCode Designation
10 : 0402 Array16 : 0603 Array
10Dimension
2P: 2 Pieces4P: 4 Pieces
4PResistors
F: 1%G: 2%J : 5%
※ Jumper : J
JTolerance
1 0 0Resistance Value
CS : Tape Packaging 7"ES : Tape Packaging 10" AS : Tape Packaging 13"
CSPackaging Code
The part number system shall be in the following format
AEC-Q200 Qualified.ASTM B809-95 satisfied. Excellent anti-sulfur performance.Lead-free terminal (matt tin)RoHS complaint with exemption.
Electronic Control Units of Automotive PartsAutomotive grade applicationsInfotainment applications for car.
Feature
Application
Structure and Dimensions
Parts Numbering System
※ Jumper : ‘000’
3 or 4 digits coding system (EIA coding system) 3digits (E-24 series) 4digits (E-96 series)
(UNIT: mm)
150
34
35
OperationNotes
Example of landPattern Design
RecommendedSoldering Conditions
General Structure
General
Low ohms(RUT Series)
Ultra Low ohms(RU Series)
Ultra Low Ohms(RUK Series)
Ultra Low Ohms(RJ Series)
Arrays(CONVEX Type)
Arrays(CONCAVE Type)
Arrays(FLAT Type)
Anti-SulfurResistors
Anti-Sulfur ResistorArrays(Convex Type)
Anti-Sulfur ResistorArrays(Concave Type)
Anti-Sulfur Resistor Arrays (Flat Type)
Automotive Anti-sulfur
Automotive Anti-sulfurArrays (Convex Type)
Attenuator
CharacteristicsPerformance
Packaging
StandardResistance Value
Specification
Please contact our sales representatives or engineers for other specifications
RPM102P
RPM104P
RPM164P
Type
0404
0804
1206
1/16
1/16
1/16
-55~155 70 Level 1
50
50
100
1 ~ 9.910 ~ 1M
300200
1(F)2(G)5(J)
Size(inch)
RatedPower
(W)
RatedVoltage
(V)
ResistanceRange
(Ω)Moisture
LevelWorkingTemp.
()
T.C.R(ppm/)
MaxWorkingVoltage
(V)
RatedAmbientTemp.
()
Tolerance(%)
P:Rated Power(W)R:Resistance(Ω)
P R
The rated power is the maximum continuous loading power at 70 ambient temperature.For ambient temperature above 70, the loading power follows the below power derating curve.
Power Derating Curve Jumper Rating
1.0 0.05 Max
RPM102P
RPM104P
RPM164P
0404
0804
1206
Type Size(inch)
Rated Current(A)
Resistance(Ω)
The specifications and designs contained herein may be subject to change without notice.Please contact our sales representatives or product engineers before order.
Land Pattern
Type A B C D E P1 P2
102P
104P
164P
0.4
0.7
0.7
0.4
0.3
0.5
0.25
0.2
0.3
0.5
0.5
0.9
0.5
0.5
0.8
0.65
0.55
0.9
-
0.5
0.8
P
A B
E
D: Land Pattern
: Chip Resistor
100
80
60
40
20
0
Perc
enta
ge o
f th
e ra
ted
diss
ipat
ion(
%) Operation area
-55
-30 0 30 60 90 120 150
Ambient Temperature( )
70 155
C
RP10AT
Type
0.04W /package 1.00 0.10 1.00 0.10 0.35 0.10 0.33 0.05 0.20 0.10 0.25 0.10 0.65 0.10 1.1
Power(W) L W T A B C PAverage Weight
Substrate
Resistor
Electrode
Structure Dimensions
LP
B
A T
W
C
RP:Convex type
RPCode Designation
10:1.0 1.0(mm)-0404(inch)AT:Unbalanced π -typeAttenuator
10ATDimensions & Circuit Configuration
L : 0.3 dBH : 0.5 dB
LAttenuation Value Tolerance
A : 50 ohm
ACharacteristic Impedance
3 dBEX) 0 → 0dB
03Attenuation Value
CS :Tape Packaging 7"
CSPacking Type
The part number system shall be in the following format
The RP10AT is small-size chip Attenuator, suitable for high density surface mountingUnbalanced type attenuator circuit in one chip(1.0 mm x 1.0 mm).Mounting occupation area reduction : about 50 % reduction.Mounting cost reduction : Mounting times 3 times 1 time.Attenuation : 0 dB to 10 dB.
Attenuation / level control / impedance matching of high frequency signals of communication equipment; cellular phones(GSM, CDMA,etc.), PHS, PDA, for example.
Feature
Application
Structure and Dimensions
Coating
Parts Numbering System
(UNIT: mm)
Attenuator
36
37
OperationNotes
Example of landPattern Design
RecommendedSoldering Conditions
General Structure
General
Low ohms(RUT Series)
Ultra Low ohms(RU Series)
Ultra Low Ohms(RUK Series)
Ultra Low Ohms(RJ Series)
Arrays(CONVEX Type)
Arrays(CONCAVE Type)
Arrays(FLAT Type)
Anti-SulfurResistors
Anti-Sulfur ResistorArrays(Convex Type)
Anti-Sulfur ResistorArrays(Concave Type)
Anti-Sulfur Resistor Arrays (Flat Type)
Automotive Anti-sulfur
Automotive Anti-sulfurArrays (Convex Type)
Attenuator
CharacteristicsPerformance
Packaging
StandardResistance Value
snoitacificepSmetI
The rated power is the maximum continuous loading power at 70 ambient temperature.For ambient temperature above 70, the loading power follows the below power derating curve.
100
80
60
40
20
0
Perc
enta
ge o
f th
e ra
ted
diss
ipat
ion(
%)
Operation area
-55
-40 0 40 80 120Ambient Temperature( )
Rated load percent ( )
70 125
Specification
Power Derating Curve
Equivalent Circuit Configuration
The specifications and designs contained herein may be subject to change without notice.Please contact our sales representatives or product engineers before order.
Attenuation Value
Attenuation Value Tolerance
Characteristic ImpendancePower Rating Frequency Range VSWR (Voltage Standing Wave Ratio)Number of terminals Category Temperature Range(Operating Temperature Range)
0 dB~15dB0 dB~5 dB : ± 0.3 dB6 dB~15dB : ± 0.5 dB50Ω0.04W / packageDC to 3 GHz1.3 max4 terminals
-55 to +125
R2
R1 R3
① ②
③ ④
① ②
③ ④
Characteristics Performance
Direct CurrentResistance
Within the regulated resistance tolerance.
Less than (1% 0.1Ω) of the initial value.
Less than (3% 0.1Ω ) of the initial value.
No evidence of mechanical damage.
No evidence of mechanical damage.
No evidence of mechanical damage.
Over 1,000MΩ
TemperatureCharacteristic
Short-timeOverload
IntermittentOverload
DielectricWithstanding
Voltage
InsulationResistance
R
R
Visual
Visual
1Ω R 10Ω : 300ppm/10Ω R 10MΩ : 100ppm/(0201 size : 250ppm/)
50mΩMax.
50mΩMax.
50mΩMax.
JIS C 5201-1 4.5Voltage apply Within 5 sec.Test temp: 20, 65RHTest board: <FIG. 1>JIS C 5201-1 4.8Test Temperature()20→ -55 / 20→ 125T.C.R(ppm/ )=(R-R20) / R20 1/(T-T20) 106
※T=test Temperature, T20 =20R=Resistance at T, R20 =Resistane at T20
Test board: <FIG. 1>
JIS C 5201-1 4.13Apply 2.5 times rated voltage for 5 sec.Wait 60 minutes at room temperature.Measure the resistance value.Test board: <FIG. 1>
JIS C 5201-1 4.132.5 times of rated voltage .1 second ON, 25 second OFF.10,000 cycles.Test board: <FIG. 1>
JIS C 5201-1 4.7Apply Voltage for 1 minute0402.0603:50V1005, 1608: 100VOther: 500V
Max SurgeCurrent
Max SurgeCurrent
Cu
Item sdohteM tseTnoitacificepS stnemeriuqeRrotsiseRrotsiseR Jumper Jumper
Cu
P2
Cu
SubstrateV
Solderability
Coverage: 95% each termination.No crack of termination parts and ceramic exposure ofsurface by melting.
Less than (1.0% 0.05Ω )of the initialvalue.
Less than (1% 0.05Ω)of the initial value.
Less than (1% 0.05Ω)of the initial value.
No evidence of mechanical damage.
No evidence of mechanical damage.
No evidence of mechanical damage.
BendingTest
Adhesive strengthof termination
No mechanical damage or sign of disconnectionJIS C 5201-1(4.16)
Test strengh : 5N (500g . f), 0603 : 2NTest time : Applying pressure for 10 seconds
Resistanceto
SolderingHeat
Anti-Vibration
Test
R
R
R
Visual
Visual
Visual
50mΩMax.
50mΩMax.
50mΩMax.
IEC60068-2-58Rosin Flux: Rosin 25%, Methanol 75%Solder Temp.: 245+5/-0Dipping time: 2±0.5 sec.(Both side dipping)
JIS C 5201-1 4.33After soldering resistor onthe PCB, 3mm of bending shallbe applied for 10 sec.Test board: <FIG. 2>
JIS C 5201-1 4.18Flow soldering :260±5,10 sec .max.(both side dipping)
Reflow soldering :260±5, 10 sec. max.over 230, 30~40 sec.
JIS C 5201-1 4.222 hours each in X, Y and Z axis(total 6 hours)10 to 55Hz sweep in 1 minute at 1.5mm amplitude.
Item sdohteM tseTnoitacificepS stnemeriuqeRrotsiseRrotsiseR repmuJrepmuJ
R23020
3mm
500 g.f
90mm
Electrical Characteristic
Mechanical Characteristic
P1P1
38
39
OperationNotes
Example of landPattern Design
RecommendedSoldering Conditions
General Structure
General
Low ohms(RUT Series)
Ultra Low ohms(RU Series)
Ultra Low Ohms(RUK Series)
Ultra Low Ohms(RJ Series)
Arrays(CONVEX Type)
Arrays(CONCAVE Type)
Arrays(FLAT Type)
Anti-SulfurResistors
Anti-Sulfur ResistorArrays(Convex Type)
Anti-Sulfur ResistorArrays(Concave Type)
Anti-Sulfur Resistor Arrays (Flat Type)
Automotive Anti-sulfur
Automotive Anti-sulfurArrays (Convex Type)
Attenuator
CharacteristicsPerformance
Packaging
StandardResistance Value
TemperatureCycle
Less than (1% 0.1Ω) of the initial value.
Less than (3% 0.1Ω) of the initial value.
Less than (3% 0.1Ω) of the initial value.
Less than (3% 0.1Ω) of the initial value.
Less than (3% 0.1Ω) of the initial value.
No evidence of mechanical damage.
No evidence of mechanical damage.
No evidence of mechanical damage.
No evidence of mechanical damage.
No evidence of mechanical damage.
Load Life
Low Temp.Exposure
High Temp.Exposure
MoistureResistance
R
R
R
R
R
Visual
Visual
Visual
Visual
Visual
50mΩMax.
50mΩMax.
50mΩMax.
50mΩMax.
50mΩMax.
JIS C 5201-1 4.19Perform 100 cycles as follows.Test Condition: -55 / 30min ↔ 125 / 30minsweep time: 5 minTest board: <FIG. 1>JIS C 5201-1 4.25Test Voltage: rated voltage Test temp.: 70 2Time: 1,000+48 hours(90 min; ON, 30 min; OFF)Test board: <FIG. 1>JIS C 5201-1 4.23Dwell in -55 chamber without loading for 1,000+48 hours.Stabilize for 60 minutes at room temperature.Measure value.Test board: <FIG. 1>JIS C 5201-1 4.23Dwell in 125 2 or 155 2 chamber without loading for 1,000+48 hours. Stabilize for 60 minutes at roomtemperature. Measure value.Test board: <FIG. 1>JIS C 5201-1 4.14Test Voltage: rated voltage Test temp.: 40 2Time: 1,000+48 hours(90 min; ON, 30 min; OFF)Humidity: 90~95% RH Stabilize for 1 hrs & Measure.Test board: <FIG. 1>
ItemsdohteM tseTnoitacificepS stnemeriuqeR
rotsiseRrotsiseR Jumper Jumper
These characteristics apply to 1Ω ~10MΩ . In case of other resistance range, please contact us.The next is specification in our company for flow soldering and test boards.
Time: 5~10 sec.
Time: 10 sec max.Temp.: 260 5.
Flux
Solder
Item gnippiDnoitacificepS
ROSIN 25%, IPA 75%
Sn-3.0Ag-0.5Cu
Environmental Characteristic
Flow soldering Conditions
The specifications and designs contained herein may be subject to change without notice.Please contact our sales representatives or product engineers before order.
Packaging
(UNIT: mm)
PunchedPaper
PressedPaper
EmbossedPlastic
1mm
2mm 8mm
2mm 8mm
4mm 8mm
4mm 12mm
8mm
Type Pitch CarrierWidth Dimensions
Reel dimensions
Tape dimensions
Taping Type
EC
C B
A
D
Wt
Unit: mmTape Width A B C D Symbol
7" Reel
10" Reel
13" Reel
8mm12mm8mm12mm8mm12mm
Ø180 0/-3Ø180 0/-3Ø258 0/-3Ø258 0/-3Ø330 2.0Ø330 2.0
Ø 60 1.0Ø 60 1.0Ø 80 1.0Ø 80 1.0Ø100 1.0Ø 80 1.0
Ø13 0.3Ø13 0.3Ø13 0.3Ø13 0.3Ø13 0.3Ø13 0.3
4 0.24 0.24 0.24 0.24 0.24 0.2
Tape Width E W t Symbol
7" Reel
10" Reel
13" Reel
8mm12mm8mm12mm8mm12mm
2.0 0.52.0 0.52.0 0.52.0 0.53.3 0.53.3 0.5
9 0.513 0.59 0.513 0.59 0.513 0.5
1.2 0.21.2 0.21.8 0.21.8 0.22.2 0.22.2 0.2
RC/RCS/RCM
Size A B TSize(inch)Type
0.36 0.020.45 0.030.24 0.030402 010050.47 0.050.68 0.050.38 0.050603 0201
RC/RCS/RCM
Size A B TSize(inch)Type
0.36 0.020.45 0.030.24 0.030402 010050.47 0.050.68 0.050.38 0.050603 0201
RC/RCS/RCM/RU/RUT
RF/RFS/RM/RMS
RP/RPS/RPM
RN/RM/RK/RNS/RMS/RKS
Size A B TSize(inch)Type
0.53 0.071.15 0.100.65 0.101005 0402
0.30 0.050.90 0.100.70 0.10062P 03020.30 0.051.60 0.100.70 0.10064P 05020.53 0.071.17 0.101.17 0.10102P 04040.53 0.072.20 0.101.20 0.10104P 08040.53 0.071.71 0.101.17 0.1010AT 04040.53 0.071.20 0.101.20 0.10102P 04040.70 0.102.20 0.101.20 0.10104P 0804
RC/RCS/RCM/RU/RUT/RUK
/RJ
RC/RPS/RPM
Size A B TSize(inch)Type
0.85 0.102.40 0.101.65 0.1020121220
08050508
0.85 0.103.60 0.202.00 0.2032161632
12060612
0.70 0.101.90 0.101.10 0.1016080816
06030306
0.85 0.103.60 0.202.90 0.203225 12100.85 0.103.60 0.202.00 0.20164P 1206
RC/RCS/RCM/RU/RUT/RUK
/RJ
Size A B TSize(inch)Type
1.00 0.104.00 0.202.30 0.202037 08151.00 0.105.30 0.202.80 0.205025 2010
1.00 0.106.75 0.203.50 0.2064323264
25121225
T
2.0 0.1
1.0
1.5 1/ 0
1.0 0.05 A
1.75 0.1
3.5
0.05
8.0
0.1
4.0 0.1
1.0
1.5 1/ 0
2.0 0.05 A
1.75 0.1
3.5
0.05
8.0
0.1
4.0 0.1
1.0
1.5 1/ 0
2.0 0.05 A
1.75 0.1
3.5
0.05
8.0
0.1
T
T
T
1.0
4.0 0.1
4.0 0.12.0 0.05
B
A
1.75 0.11.5 0.1/ 0
3.5
0.05
8.0
0.1
2 0.05 5.5
0.05
120.
2
Ø1.5 0.1/ 0
1.75
B
4
4Ø1.5 AT
0.3 0.2
40
41
OperationNotes
Example of landPattern Design
RecommendedSoldering Conditions
General Structure
General
Low ohms(RUT Series)
Ultra Low ohms(RU Series)
Ultra Low Ohms(RUK Series)
Ultra Low Ohms(RJ Series)
Arrays(CONVEX Type)
Arrays(CONCAVE Type)
Arrays(FLAT Type)
Anti-SulfurResistors
Anti-Sulfur ResistorArrays(Convex Type)
Anti-Sulfur ResistorArrays(Concave Type)
Anti-Sulfur Resistor Arrays (Flat Type)
Automotive Anti-sulfur
Automotive Anti-sulfurArrays (Convex Type)
Attenuator
CharacteristicsPerformance
Packaging
StandardResistance Value
138
121
149
149
573
474
474
695
87
147
147
331
539
548
120
324
561
144
360
658
152
382
695
178
463
674
145
197
262
1,041
126
573
126
573
95
485
131
610
152
695
95
485
TYPE(mm)
TYPE(inch)
Taping Packaging
Code Reel Quantity Weight(g)
Packaging Table
0603 0201
1005 0402
16080816*
06030306*
20121220*
08050508*
32161632*
12060612*
3225 1210
2037* 0815*
5025 2010
64323264*
25121225*
062P 0201 2R
064P 0201 2R
102P 0402 2R
104P 0402 4R
165P 0603 4R
10AT 0404
CS
CS
DS
DP
AS
FS
FP
WS
CS
DS
DP
ES
AS
FS
CS
ES
AS
CS
ES
AS
CS
ES
AS
CS
ES
AS
CS
CS
CS
AS
CS
AS
CS
AS
CS
AS
CS
AS
CS
AS
CS
AS
7”
7”
7”
7”
13”
13”
13”
13”
7”
7”
7”
10”
13”
13”
7”
10”
13”
7”
10”
13”
7”
10”
13”
7”
10”
13”
7”
7”
7”
13”
7”
13”
7”
13”
7”
13”
7”
13”
7”
13”
7”
13”
20,000
15,000
20,000
20,000
60,000
50,000
50,000
150,000
10,000
20,000
20,000
30,000
40,000
50,000
5,000
10,000
20,000
5,000
10,000
20,000
5,000
10,000
20,000
5,000
10,000
20,000
4,000
4,000
4,000
15,000
15,000
60,000
15,000
60,000
10,000
40,000
10,000
40,000
5,000
20,000
10,000
40,000
General type, Precision, Low ohms, High ohms.Packaging style can be modified when you want.(*) Wide Terminal Type
The specifications and designs contained herein may be subject to change without notice.Please contact our sales representatives or product engineers before order.
Carrier Tape
Pressed Paper
Pressed Paper
Pressed Paper
Punched PE
Pressed Paper
Pressed Paper
Punched PE
Pressed Paper
Punched Paper
Punched Paper
Embossed
Plastic
Punched Paper
Punched PE
Standard ResistanceValue
Digit NumberIEC-Code System
Specification
Tolerance Code K
E-1210%
J
E-245%
G
E-482%
F
E-961%
Dtigid 3tigid 4
E-1920.5%
M
E-620%
100101102104105106107109110111113114115117118120121123124126127129130132133135137138140142143145147149150152154156158160162164165167169172174176
100
102
105
107
110
113
115
118
121
124
127
130
133
137
140
143
147
150
154
158
162
165
169
174
100
105
110
115
121
127
133
140
147
154
162
169
10
11
12
13
15
16
E-192 E-96 E-48 E-24178180182184187189191193196198200203205208210213215218221223226229232234237240243246249252255258261264267271274277280284287291294298301305309312
178
182
187
191
196
200
205
210
215
221
226
232
237
243
249
255
261
267
274
280
287
294
301
309
178
187
196
205
215
226
237
249
261
274
287
301
18
20
22
24
27
30
E-192 E-96 E-48 E-24316320324328332336340344348352357361365370374379383388392397402407412417422427432437442448453459464470475481487493499505511517523530536542549556
316
324
332
340
348
357
365
374
383
392
402
412
422
432
442
453
464
475
487
499
511
523
536
549
316
332
348
365
383
402
422
442
464
487
511
536
33
36
39
43
47
51
E-192 E-96 E-48 E-24562569576583590597604612619626634642649657665673681690698706715723732741750759768777787796806816825835845856866876887898909920931942953965976988
562
576
590
604
619
634
649
665
681
698
715
732
750
768
787
806
825
845
866
887
909
931
953
976
562
590
619
649
681
715
750
787
825
866
909
953
56
62
68
75
82
91
E-192 E-96 E-48 E-24
Example
E-6 series 20%
80Ω 90Ω 95Ω100Ω
105Ω 110Ω 120Ω
E-12 series 10%E-24 series 5%
E-96 series 1%101Ω99Ω
Tolerance Code Table
Significant Figure of Resistance Value
42
43
OperationNotes
Example of landPattern Design
RecommendedSoldering Conditions
General Structure
General
Low ohms(RUT Series)
Ultra Low ohms(RU Series)
Ultra Low Ohms(RUK Series)
Ultra Low Ohms(RJ Series)
Arrays(CONVEX Type)
Arrays(CONCAVE Type)
Arrays(FLAT Type)
Anti-SulfurResistors
Anti-Sulfur ResistorArrays(Convex Type)
Anti-Sulfur ResistorArrays(Concave Type)
Anti-Sulfur Resistor Arrays (Flat Type)
Automotive Anti-sulfur
Automotive Anti-sulfurArrays (Convex Type)
Attenuator
CharacteristicsPerformance
Packaging
StandardResistance Value
Attention
1. This catalogue is valid only to the products purchased either from us or through our of!cial distri-butors.
2. Product speci!cations included in this catalogue are effective as of Dec 1, 2014. Please be advised that they are standard product speci!cations for reference only. We may change, modify or discontinue the product speci!cations without notice at any time.So, you need to approve the product speci!cations before placing an order. Should you have any question regarding our product speci!cations, please contact our sales personnel or applicationengineers.
3. We may modify or cease to produce the products listed in this catalogue without notice. Should you have any question, please contact our sales personnel or application engineers.
4. Without obtaining our permission, you should not be allowed to reproduce, copy, use or transfer any content or information contained this catalogue in any manner whatsoever for any purpose.
5. In no event, will we be responsible for any claim, dispute, damage or liability whatsoever arising from, relating to or in connection with your misuse of the products or/and information included in this catalogue. We will also not assume any responsibilities whatsoever for any claim, dispute, damage or liability with regards to the intellectual property rights or other related rights of ours or any third party as- sociated with your use of our products and/or information contained in this catalogue. Weexpres-sly disclaim that no license is granted regarding the aforementioned rights.
6. Please note that the products in this catalogue are not designed or intended to use for the appoli- cations set forth below. So, if you intend to use the products in this catalogue for the applications listed below,you should contact our sales personnel or application engineers before using.Please be aware that any misuse of the products deviating from product speci!cations or informa- tion provided in this catalogue may cause a serious property damage or a personal injury.
① Aerospace/Aviation equipment② Transportation equipment (vehicles, trains, ships, etc)③Medical equipment ④Military equipment ⑤ Disaster prevention/crime prevention equipment⑥ Any other applications with the same as or similar complexity or reliability to the applications set
forth above.
ISO/TS 16949 ISO 14001 OHSAS 18001 QC080000
44
45
ISO / TS 16949
ISO 14001
OHSAS 18001
QC080000
2015 - 04 - 16
2012 - 04 - 17
EMS 585307
BSI
OHS 585308
Date
Validity
Number
)anihC(hceT hgiHnoitceSnoitacifitreC
Authority
Date
Validity
Number
Authority
Date
Validity
Number
Authority
Date
Validity
Number
Authority
2012 - 04 - 17
2015 - 04 - 16
UL
PRC-HSPM-1767-1
2013 - 07 - 08
2016 - 07 - 26
BSI
BSI
TS 91430-008
2014 - 11 - 19
2017 - 11 - 18
Quality System Certification ListTable 1:Certification list of Samsung Factory
Note
Note
46
47
Passive components sales offices
All information indicated in this catalog is as of December. 2014 The specifications and designs contained herein may be subject to change without notice.
Head office206, Cheomdansaneop Road,Yeongtong-gu, Suwon-city,Gyeonggi province, Korea,443 - 743
EuropeTel: + 82 - 31 - 210 - 6328E-mail:[email protected]
Tel: + 82 - 31 - 210 - 6803E-mail:[email protected]
America
AsiaTel: + 82 - 31 - 210 - 6791E-mail:[email protected]
DomesticTel: + 82 - 31 - 210 - 5074E-mail:[email protected]
Manufacturing sitesSuwon Plant (Korea)206, Cheomdansaneop Road,Yeongtong - gu, Suwon-city,Gyeonggi province, Korea443 - 743Tel: + 82 - 31 - 210 - 5074E-mail:[email protected]
Busan Plant (Korea)1623 - 2, Songjeong - dong,Gangseo - gu, Busan, Korea,618 - 270Tel: + 82 - 51 - 970 - 7671E-mail:[email protected]
Tianjin Plant (China)27, Heiniucheng - Road, Hexi District,Tianjin, 300210 ChinaTel: +86 - 22 - 2397 - 9000(310) E-mail:[email protected]
High Tech (China)Xiqing Dist. Micro - Electronics Industrial Park, Jingang Highway, Tianjin, China 300385Tel:+ 86 - 22 - 2397 - 9000(3143)E-mail:[email protected]
Binhai Plant(China) 80, XiaQing Road, West area of BinHai development zone,TianJin, 300458, ChinaTel:+ 86 - 22 - 6686 - 3333(1300)E-mail:[email protected]
Philippines Plant (Philippines)Block No.5, Calamba PremiereInternational Park, Batino, Calamba,Laguna, Manila, Philippines 4027Tel: + 63 - 49 - 545 - 0422E-mail:[email protected]
Asia sales officesShenzhen Office46 F, New World Center,Yitian Road, Futian District,Shenzhen, 518026 ChinaTel: 86 - 755 - 8608 - 5571E-mail:[email protected]
Shanghai OfficeRm. 1211, Shanghai InternationalTrade Center, No. 2201 Yan an (W) Rd.,Shanghai, 200335 ChinaTel: 86 - 21 - 6270 - 4168(274)E-mail:[email protected]
HongKong Office8/F.,Central Plaza, 18 Harbour Road,Wanchai, Hongkong, ChinaTel:852 - 28626344E-mail:[email protected]
Qingdao OfficeRm 1201. Growne Plaza Qingdao 76,Xiang Gang Zhong Rd, Qingdao, 266071 ChinaTel:86 - 85779102E-mail:[email protected]
Taiwan Office9F - 1, Np. 399 Ruey Kuang Rd., NeihuDistrict, Taipei City, Taiwan, 114Tel:886 - 2656 - 8356E-mail:[email protected]
Singapore Office3 Church Street Samsung Hub,#23 - 02 Singapore 049483Tel:65 - 6833 - 3228E-mail:[email protected]
Bangkok Office23rd Floor, Lake Rajada Office Complex193/89 Rachadapisek Road,Khet Klongtoey, Bangkok 10110, ThailandTel:66 - 2 - 661 - 8004 ~ 5E-mail:[email protected]
America sales officeIrvine Office3333 Michelson Drive,Suite 500, Irvine, CA 92612, USATel: 1 - 949 - 797 - 8016E-mail: [email protected]
Europe sales officesFrankfurt OfficeSamsung Haus, Am Kronberger Hang 6,D-65824 Schwalbach/Ts. GermanyTel: 49 - 6196 - 66 - 7255E-mail:[email protected]
Hungary OfficeH-2310, Leshegy utca 2-4,Szigetszentmiklos, Pest megye, HungaryTel: 36 - 24 - 551 - 148E-mail:[email protected]
Domestic DistributorsKorchip Corporation 817 - 38, Anyang 2 - dong, Manan - gu,Anyang-city, Gyeonggi province,Korea, 430-812Tel: + 82 - 31 - 361 - 8100E-mail:[email protected]
SAMTDaekyung Bldg., 983 -10, Daechi - dong,Gangnam - gu, Seoul, KoreaTel: + 82 - 2 - 3458 - 9000E-mail:[email protected]
CHUNGMAC301 Gwonseon Medivill, 544-14Gokbanjeong-dong, Gwonseon-gu,Suwon-si, Gyeonggi-do KoreaTel: + 82 - 31 - 234 - 2367 ~ 8E-mail:[email protected]
YOUNGDUKGasan-Dong 632, Seobusaetgil,Geumcheon-Gu, Seoul, KoreaTel: + 82 - 2 - 2107 - 7860E-mail:[email protected]