Cleanroom Door & Window System Brochure
MAYAIR
MANUFACTURING
(M) SDN BHD
SEMICONDUCTOR
&
MICROELECTRONICS
INDUSTRY
CEILING GRID
Global Clean Tech Solution Provider
_______________________________________________________________________________________________
Corporate Head Quarter/Malaysia Office
No 18, Jalan 6/2B, Taman Industri Selesa Jaya, 43300 Seri Kembangan, Selangor Malaysia.
Tel: +603 8961 2908 Fax: +603 8961 2948
Email: [email protected] Website: http://www.mayair.com.my
Page 1
DOOR SYSTEM
DOOR FRAME The doorframe is made of Aluminum alloy (6063-T5).
Rubber gasket is installed in the doorframe to ensure air
tight
SURFACE TREATMENT Powder coated with grey white color or natural anodized.
DOOR LEAF 45mm thick (With single clear class window)
FACINGS 0.5mm (t) steel sheet with PE roll coated covered by plastic foil (0.04mm) Color: grey white
CORE Aluminum honeycomb with non-combustible class B1
ADHESIVE Rebon YB2002 (resin) mixed with YB8001 (Hardener)
Epoxy Past Adhesive
Mixing Ratio, YB2002:YB8001=4:1
DOOR ACCESSORIES Provided “ROCK“ lever handle lock, a set of “ROCK” 4
inches stainless steel hinges and “GEZE” door closer
Global Clean Tech Solution Provider
_______________________________________________________________________________________________
Corporate Head Quarter/Malaysia Office
No 18, Jalan 6/2B, Taman Industri Selesa Jaya, 43300 Seri Kembangan, Selangor Malaysia.
Tel: +603 8961 2908 Fax: +603 8961 2948
Email: [email protected] Website: http://www.mayair.com.my
Page 2
Figure 1: Door (Type SS2000)
Global Clean Tech Solution Provider
_______________________________________________________________________________________________
Corporate Head Quarter/Malaysia Office
No 18, Jalan 6/2B, Taman Industri Selesa Jaya, 43300 Seri Kembangan, Selangor Malaysia.
Tel: +603 8961 2908 Fax: +603 8961 2948
Email: [email protected] Website: http://www.mayair.com.my
Page 3
Figure 2: Door System Structure
WINDOW SYSTEM
WINDOW FRAME Made of Aluminum alloy (6063-T5).
SURFACE TREATMENT Powder coated with grey white color or natural anodized.
DOOR LEAF Standard glazing is 5mm clear glass.
Alternative glazing available as following:
A. Temper glass
B. Fire rating glass
C. Acyclic glazing
D. Poly Carbonate (PC) glazing
E. Poly Vinyl Chloride (PVC) glazing
Figure 1: Window System
Global Clean Tech Solution Provider
_______________________________________________________________________________________________
Corporate Head Quarter/Malaysia Office
No 18, Jalan 6/2B, Taman Industri Selesa Jaya, 43300 Seri Kembangan, Selangor Malaysia.
Tel: +603 8961 2908 Fax: +603 8961 2948
Email: [email protected] Website: http://www.mayair.com.my
Page 4
Figure 2: Window System Structure
PHARMACEUTICAL
& BIO-TECH
INDUSTRY
CEILING GRID
Global Clean Tech Solution Provider
_______________________________________________________________________________________________
Corporate Head Quarter/Malaysia Office
No 18, Jalan 6/2B, Taman Industri Selesa Jaya, 43300 Seri Kembangan, Selangor Malaysia.
Tel: +603 8961 2908 Fax: +603 8961 2948
Email: [email protected] Website: http://www.mayair.com.my
Page 1
MAYAIR DOOR SYSTEM – TYPE DL3 FULL AIR-TIGHT
DOOR
DOOR FRAME The doorframe is made of Steel Alloy (Cold Roll Metal
Sheet)
Rubber gasket is installed in the doorframe to ensure air
tight
SURFACE TREATMENT Powder coated with color requested by customer.
DOOR LEAF 50mm thick. 3 layer bending edge
Opening double glaze clear class window size is equal to
customer requirement, infill with desiccant to prevent
condensation.
FACINGS 1.5mm thick cold roll metal sheet with a PE roll coating
finish, color-according to customer requirement.
CORE Rock Wool Slab, Density 100kg/m3 with fire rating >1hour
ADHESIVE Rebon YB2002 (resin) mixed with YB8001 (Hardener)
Epoxy Past Adhesive
Mixing Ratio, YB2002:YB8001=4:1
DOOR ACCESSORIES Provided “ROCK“ lever handle lock, a set of “ROCK” 4
inches stainless steel hinges and “GEZE” door closer
Figure 1: Pharmaceutical Door System
Type DL3
Global Clean Tech Solution Provider
_______________________________________________________________________________________________
Corporate Head Quarter/Malaysia Office
No 18, Jalan 6/2B, Taman Industri Selesa Jaya, 43300 Seri Kembangan, Selangor Malaysia.
Tel: +603 8961 2908 Fax: +603 8961 2948
Email: [email protected] Website: http://www.mayair.com.my
Page 2
Figure 2: Pharmaceutical DL3 Door System Drawing
Global Clean Tech Solution Provider
_______________________________________________________________________________________________
Corporate Head Quarter/Malaysia Office
No 18, Jalan 6/2B, Taman Industri Selesa Jaya, 43300 Seri Kembangan, Selangor Malaysia.
Tel: +603 8961 2908 Fax: +603 8961 2948
Email: [email protected] Website: http://www.mayair.com.my
Page 3
Figure 3: Pharmaceutical DL3 Door System Type L3 Section Drawing
Global Clean Tech Solution Provider
_______________________________________________________________________________________________
Corporate Head Quarter/Malaysia Office
No 18, Jalan 6/2B, Taman Industri Selesa Jaya, 43300 Seri Kembangan, Selangor Malaysia.
Tel: +603 8961 2908 Fax: +603 8961 2948
Email: [email protected] Website: http://www.mayair.com.my
Page 4
Figure 4: Pharmaceutical Door System Type DL3 Section Drawing
Figure 5: Pharmaceutical DL3 Door System Double Glaze Detail Drawing
Global Clean Tech Solution Provider
_______________________________________________________________________________________________
Corporate Head Quarter/Malaysia Office
No 18, Jalan 6/2B, Taman Industri Selesa Jaya, 43300 Seri Kembangan, Selangor Malaysia.
Tel: +603 8961 2908 Fax: +603 8961 2948
Email: [email protected] Website: http://www.mayair.com.my
Page 5
MAYAIR DOOR SYSTEM – TYPE DL2 SEMI AIR-TIGHT
DOOR
DOOR FRAME The doorframe is made of Steel Alloy (Cold Roll Metal
Sheet)
Rubber gasket is installed in the doorframe to ensure air
tight
SURFACE TREATMENT Powder coated with color requested by customer.
DOOR LEAF 50mm thick. 2 layer bending edge
Opening double glaze clear class window size is equal to
customer requirement, infill with desiccant to prevent
condensation.
FACINGS 1.5mm thick cold roll metal sheet with a PE roll coating
finish, color-according to customer requirement.
CORE Rock Wool Slab, Density 100kg/m3 with fire rating >1hour
ADHESIVE Rebon YB2002 (resin) mixed with YB8001 (Hardener)
Epoxy Past Adhesive
Mixing Ratio, YB2002:YB8001=4:1
DOOR ACCESSORIES Provided “ROCK“ lever handle lock, a set of “ROCK” 4
inches stainless steel hinges and “GEZE” door closer
Figure 1: Pharmaceutical Door System Type DL2
Global Clean Tech Solution Provider
_______________________________________________________________________________________________
Corporate Head Quarter/Malaysia Office
No 18, Jalan 6/2B, Taman Industri Selesa Jaya, 43300 Seri Kembangan, Selangor Malaysia.
Tel: +603 8961 2908 Fax: +603 8961 2948
Email: [email protected] Website: http://www.mayair.com.my
Page 6
Figure 2: Pharmaceutical DL2 Door System Drawing
Figure 3: Pharmaceutical Door System Type DL2 Section Drawing
Global Clean Tech Solution Provider
_______________________________________________________________________________________________
Corporate Head Quarter/Malaysia Office
No 18, Jalan 6/2B, Taman Industri Selesa Jaya, 43300 Seri Kembangan, Selangor Malaysia.
Tel: +603 8961 2908 Fax: +603 8961 2948
Email: [email protected] Website: http://www.mayair.com.my
Page 7
Figure 4: Pharmaceutical DL2 Door System Type DL2 Section Drawing
Global Clean Tech Solution Provider
_______________________________________________________________________________________________
Corporate Head Quarter/Malaysia Office
No 18, Jalan 6/2B, Taman Industri Selesa Jaya, 43300 Seri Kembangan, Selangor Malaysia.
Tel: +603 8961 2908 Fax: +603 8961 2948
Email: [email protected] Website: http://www.mayair.com.my
Page 8
MAYAIR DOOR SYSTEM – TYPE DL1 DOOR
DOOR FRAME The doorframe is made of Aluminum alloy (6063-T5).
Rubber gasket is installed in the doorframe to ensure air
tight
SURFACE TREATMENT Powder coated with grey white color or natural anodized.
DOOR LEAF 45mm thick
Opening single clear class window size is equal to
customer requirement)
FACINGS Aluminum plate with a thickness of 0.8 mm and a PE roll
coating finish, covered by plastic foil (0.04mm), color-grey
white.
CORE Aluminum honeycomb with non-combustible class B1
ADHESIVE Rebon YB2002 (resin) mixed with YB8001 (Hardener)
Epoxy Past Adhesive
Mixing Ratio, YB2002:YB8001=4:1
DOOR ACCESSORIES Provided “ROCK’ lever handle lock, a set of “ROCK”
4inches stainless steel hinges and “GEZE” door closer
Figure 1: Pharmaceutical Door System Type DL1
Global Clean Tech Solution Provider
_______________________________________________________________________________________________
Corporate Head Quarter/Malaysia Office
No 18, Jalan 6/2B, Taman Industri Selesa Jaya, 43300 Seri Kembangan, Selangor Malaysia.
Tel: +603 8961 2908 Fax: +603 8961 2948
Email: [email protected] Website: http://www.mayair.com.my
Page 9
Figure 2: Pharmaceutical DL1 Door System Drawing
Global Clean Tech Solution Provider
_______________________________________________________________________________________________
Corporate Head Quarter/Malaysia Office
No 18, Jalan 6/2B, Taman Industri Selesa Jaya, 43300 Seri Kembangan, Selangor Malaysia.
Tel: +603 8961 2908 Fax: +603 8961 2948
Email: [email protected] Website: http://www.mayair.com.my
Page 10
Figure 3: Pharmaceutical Door System Type DL1 Section Drawing
Figure 4: Pharmaceutical Door System Type DL1 Section Drawing
Global Clean Tech Solution Provider
_______________________________________________________________________________________________
Corporate Head Quarter/Malaysia Office
No 18, Jalan 6/2B, Taman Industri Selesa Jaya, 43300 Seri Kembangan, Selangor Malaysia.
Tel: +603 8961 2908 Fax: +603 8961 2948
Email: [email protected] Website: http://www.mayair.com.my
Page 11
WINDOW SYSTEM – TYPE DG2
WINDOW FRAME Made of Aluminum alloy (6063-T5).
SURFACE TREATMENT Powder coated with grey white color or natural anodized.
DOOR LEAF Double glazing window, vacuum type window, infill with
desiccant to prevent condensation. Glazing is standard
5mm clear glass.
Alternative glazing available as following:
A. Temper glass
B. Fire rating glass
C. Acyclic glazing
D. Poly Carbonate (PC) glazing
E. Poly Vinyl Chloride (PVC) glazing
Figure 1: Double Glaze System
Corporate Head Quarter / Malaysia Office
No 18, Jalan 6/2B, Taman Industri Selesa Jaya,
43000 Seri Kembangan, Selangor Malaysia
Tel: +603 8961 2908
Fax: +603 8961 2948
Email: [email protected]
Website: http://www.mayair.com.my
Updated On 2017