geRmann+FReI agaDvanceD TecHnology
geRmann + FReI agmartinsbruggstrasse 92cH-9016 st.gallenswitzerlandphone +41(0)71-282 16 40Telefax +41(0)71-282 16 50e-mail [email protected] 9.
2010
e
COMBINED SPIN FLANGER/BEADER SBV 400
Combined
Spin Flanger/Beader
SBV 1200.
sTaTe oF THe aRT DesIgn
NEw COMBINATION POSSIBILITIES OF PRODuCTION uNITS MOST SuITABLE FOR CuSTOMER’S REquIREMENT
TO INSuRE hIGh PRECISION MANuFACTuRING
WITH neW IDeas To InsuRe success
Aerosol can line for
up to 750 cpm.
High flexibility and space
saving setup thanks to electronic
synchronisation.
TEChNICAL DATA SBV 400 SBV 401 SBV 402diameter range mm 99–166 99–153 99–153
cut body height range
– flanging only mm 74–208 88–258 74–208
– flanging and beading mm 111–208 136–258 111–208
capacity per minute cans 80–330 80–330 80–400
alternatively cans 40–165 40–165
connected load kW 15 15 15
subject to alterations
This machine includes two working
stations, the first for flanging accor-
ding to the well proven spin flanging
principle and a second for beading with
two driven mandrels per head. Thus
the machine is suitable for cylindrical
cans, in particular when working with
very thin tinplate in DR quality. The
machine has 6 heads in the flanging
station and 8 heads in the beading
station. The vertical design allows the
installation of a straight-lined and
inexpensive conveyor through the
machine.
Its essential characteristics are the
consistently precise manufactured
container, the compact design, the
very smooth running without vibrations
and the simple handling. For further
information please see the technical
details.
Control panel
SBV 400.
COMBINED SPIN FLANGER/BEADER SBV 400
HIgH pRecIsIon macHInes FoR can manuFacTuRIng
TEChNICAL DETAILS SBV 400
• bead depth adjustable within 1,5mm
• by-pass for cans which are not beaded
• high flexibility thanks to short change-over times for diameter and height
• excellent accessibility
• central oil lubrication system which reduces maintenance to an absolute minimum
• electronic control of machine func-tions for the flanging and beading station as well as for the conveyor turrets
• electronic speed regulation
• declaration of ce-conformity for machine and control
PLC controlled production units for
high precision tool manufacturing.
Planning and designing by
modern CAD technology.
This machine includes two working
stations, the first for flanging accor-
ding to the well proven spin flanging
principle and a second for beading with
two driven mandrels per head. Thus
the machine is suitable for cylindrical
cans, in particular when working with
very thin tinplate in DR quality. The
machine has 6 heads in the flanging
station and 8 heads in the beading
station. The vertical design allows the
installation of a straight-lined and
inexpensive conveyor through the
machine.
Its essential characteristics are the
consistently precise manufactured
container, the compact design, the
very smooth running without vibrations
and the simple handling. For further
information please see the technical
details.
Control panel
SBV 400.
COMBINED SPIN FLANGER/BEADER SBV 400
HIgH pRecIsIon macHInes FoR can manuFacTuRIng
TEChNICAL DETAILS SBV 400
• bead depth adjustable within 1,5mm
• by-pass for cans which are not beaded
• high flexibility thanks to short change-over times for diameter and height
• excellent accessibility
• central oil lubrication system which reduces maintenance to an absolute minimum
• electronic control of machine func-tions for the flanging and beading station as well as for the conveyor turrets
• electronic speed regulation
• declaration of ce-conformity for machine and control
PLC controlled production units for
high precision tool manufacturing.
Planning and designing by
modern CAD technology.
This machine includes two working
stations, the first for flanging accor-
ding to the well proven spin flanging
principle and a second for beading with
two driven mandrels per head. Thus
the machine is suitable for cylindrical
cans, in particular when working with
very thin tinplate in DR quality. The
machine has 6 heads in the flanging
station and 8 heads in the beading
station. The vertical design allows the
installation of a straight-lined and
inexpensive conveyor through the
machine.
Its essential characteristics are the
consistently precise manufactured
container, the compact design, the
very smooth running without vibrations
and the simple handling. For further
information please see the technical
details.
Control panel
SBV 400.
COMBINED SPIN FLANGER/BEADER SBV 400
HIgH pRecIsIon macHInes FoR can manuFacTuRIng
TEChNICAL DETAILS SBV 400
• bead depth adjustable within 1,5mm
• by-pass for cans which are not beaded
• high flexibility thanks to short change-over times for diameter and height
• excellent accessibility
• central oil lubrication system which reduces maintenance to an absolute minimum
• electronic control of machine func-tions for the flanging and beading station as well as for the conveyor turrets
• electronic speed regulation
• declaration of ce-conformity for machine and control
PLC controlled production units for
high precision tool manufacturing.
Planning and designing by
modern CAD technology.
This machine includes two working
stations, the first for flanging accor-
ding to the well proven spin flanging
principle and a second for beading with
two driven mandrels per head. Thus
the machine is suitable for cylindrical
cans, in particular when working with
very thin tinplate in DR quality. The
machine has 6 heads in the flanging
station and 8 heads in the beading
station. The vertical design allows the
installation of a straight-lined and
inexpensive conveyor through the
machine.
Its essential characteristics are the
consistently precise manufactured
container, the compact design, the
very smooth running without vibrations
and the simple handling. For further
information please see the technical
details.
Control panel
SBV 400.
COMBINED SPIN FLANGER/BEADER SBV 400
HIgH pRecIsIon macHInes FoR can manuFacTuRIng
TEChNICAL DETAILS SBV 400
• bead depth adjustable within 1,5mm
• by-pass for cans which are not beaded
• high flexibility thanks to short change-over times for diameter and height
• excellent accessibility
• central oil lubrication system which reduces maintenance to an absolute minimum
• electronic control of machine func-tions for the flanging and beading station as well as for the conveyor turrets
• electronic speed regulation
• declaration of ce-conformity for machine and control
PLC controlled production units for
high precision tool manufacturing.
Planning and designing by
modern CAD technology.
geRmann+FReI agaDvanceD TecHnology
geRmann + FReI agmartinsbruggstrasse 92cH-9016 st.gallenswitzerlandphone +41(0)71-282 16 40Telefax +41(0)71-282 16 50e-mail [email protected] 9.
2010
e
COMBINED SPIN FLANGER/BEADER SBV 400
Combined
Spin Flanger/Beader
SBV 1200.
sTaTe oF THe aRT DesIgn
NEw COMBINATION POSSIBILITIES OF PRODuCTION uNITS MOST SuITABLE FOR CuSTOMER’S REquIREMENT
TO INSuRE hIGh PRECISION MANuFACTuRING
WITH neW IDeas To InsuRe success
Aerosol can line for
up to 750 cpm.
High flexibility and space
saving setup thanks to electronic
synchronisation.
TEChNICAL DATA SBV 400 SBV 401 SBV 402diameter range mm 99–166 99–153 99–153
cut body height range
– flanging only mm 74–208 88–258 74–208
– flanging and beading mm 111–208 136–258 111–208
capacity per minute cans 80–330 80–330 80–400
alternatively cans 40–165 40–165
connected load kW 15 15 15
subject to alterations
geRmann+FReI agaDvanceD TecHnology
geRmann + FReI agmartinsbruggstrasse 92cH-9016 st.gallenswitzerlandphone +41(0)71-282 16 40Telefax +41(0)71-282 16 50e-mail [email protected] 9.
2010
e
COMBINED SPIN FLANGER/BEADER SBV 400
Combined
Spin Flanger/Beader
SBV 1200.
sTaTe oF THe aRT DesIgn
NEw COMBINATION POSSIBILITIES OF PRODuCTION uNITS MOST SuITABLE FOR CuSTOMER’S REquIREMENT
TO INSuRE hIGh PRECISION MANuFACTuRING
WITH neW IDeas To InsuRe success
Aerosol can line for
up to 750 cpm.
High flexibility and space
saving setup thanks to electronic
synchronisation.
TEChNICAL DATA SBV 400 SBV 401 SBV 402diameter range mm 99–166 99–153 99–153
cut body height range
– flanging only mm 74–208 88–258 74–208
– flanging and beading mm 111–208 136–258 111–208
capacity per minute cans 80–330 80–330 80–400
alternatively cans 40–165 40–165
connected load kW 15 15 15
subject to alterations