CONVEYOR BELTS FOR ALUMINUM EXTRUSION
Visit our site
Visite nuestraWeb
ALUMINUM EXTRUSION LINE
Sampla's products offer superior heat and abrasion resistance, reducing the cost and down time associated with frequent belt changes. We specialize in solving problems. If your application requires rethinking the type of belt you use, be it just a change in the weave pattern, material type, or maybe special fabrication – we can do it! We also offer full fabrication services, including applying specialty resins to improve wear and temperature characteristics, stitching cleats and guides as well as various ways to make the belt endless. Sampla Belting is an international manufacturer of belting products. Our sixty years of experience in manufacturing belting, and working closely with customers around the world are our guarantee to you that you will enjoy doing business with us.
2
ALUMINUM EXTRUSION LINE
EXTRUDER
PICK UP TABLE
FIRST COOLING TABLE
SECOND COOLING TABLE
SIZINGTABLE
850 F 580 F 300 F
1050 F
850 F
750 F
Material Material Material Material
Dimension
Inner Diameter:55mm to 140mm
Length:<120mm
Thickness:5 to 10mm
Dimension
Inner Diameter:55mm to 140mm
Length:<120mm
Thickness:5 to 10mm
Dimension
Inner Diameter:55mm to 140mm
Length:<120mm
Thickness:5 to 10mm
Dimension
Inner Diameter:55mm to 140mm
Length:<120mm
Thickness:5 to 10mm
WorkingTemperature
1,200 F 600 C
WorkingTemperature
950 F 500 C
WorkingTemperature
300 F 150 C
WorkingTemperature
150 C
300 F
Comments Hard type available
Comments Hard type available
Comments Comments Shrinkage:more than 20%
PBO TUBE KEVLAR TUBE POLYESTER ACRYLIC TUBE
PBO + Kevlar Kevlar Polyester Acrylic
TUBES
Working Temp
Working Temp
3
565 C
450 C
390 C
450 C 300 C 150 C
PADS
Material
Dimension
Width:50mm to 3,000mm
Length:per customer’srequest
Thickness:5 to 10mm
WorkingTemperature
600 C
1,200 F
Comments Hard type available
PBO + Kevlar
PBO PAD
Material
Dimension
Width:50mm to 3,000mm
Length:per customer’s request
Thickness:5 to 10mm
WorkingTemperature
500 C
950 F
Comments Hard type available
Material
Dimension
Width:50mm to 3,000mm
Length:per customer’s request
Thickness:5 to 10mm
WorkingTemperature
230 C
450 F
Comments Hard type available
KEVLAR PAD NOMEX PAD
Kevlar Nomex
BELTS
Material
Dimension
Width: <3,000mm
Inner Circumference:<30,000mm
Thickness:3 to 12mm
WorkingTemperature
600 C
1,200 F
Comments Hard type available
KEVLAR BELT NOMEX BELT POLYESTER BELT
Material
Dimension
Width: <3,000mm
Inner Circumference:<30,000mm
Thickness:3 to 12mm
WorkingTemperature
450 F 230 C
Comments Hard type available
Material
Dimension
Width: <3,000mm
Inner Circumference:<30,000mm
Thickness:3 to 12mm
WorkingTemperature
150 C
300 F
Comments Hard type available
Kevlar Nomex Polyester
4
Spacer Bars & Aging Furance Crates
Woven Products
Material Nomex
Dimension
Per customer’s request
Thickness: 2mm
Density: 450g/m2
WorkingTemperature
230 C
450 F
Comments Shrinkage: <1%
Material Nomex
Dimension
Per customer’s request
Thickness: 2 to 10mm
WorkingTemperature
230 C
450 F
SPACER BARS AND AGING FURNACE CRATES
NOMEX CRADLE LINER STRIPS
PROTECTIVE COVERING FOR PALLET POLES
Kevlar 1 & 2 ply
Suggested fo r l ine catcher belt pads and extrusion table pads
1ply : 1.5mm 2ply: 4mm
1ply: 650 -700 F/350 C 2ply: 700-900 F/450 C
K-7 Kevlar/wire construction.Good abrasion & cut resistance.
5mm 800 -1000 F420 - 540 C
K-11 Smooth weave, suitable for light weight hot end process.
3mm 700 -900 F370 - 480 C
K-24 4 Ply woven Kevlar, good cut & heat resistance
5mm 800 -1,000 F420 - 540 C
K-26 4 Ply woven Kevlar with pan fibers to improve heat d iss ipat ion to e x t e n d w e a r a n d resistance to open flame.
5mm 800 -1,000 F420 - 540 C
FK-Glass Solid woven E glass fiber. Designed for extreme heat.
7.6mm 1,000 -1,400 F
540 - 760 C
Material Nomex
Dimension Per customer’s request
WorkingTemperature
230 C
450 F
MATERIAL DESCRIPTION THICKNESS TEMPERATURE
5
NOVA - Needled Polyester + rubber impregnated
NOVA 25Green
HC BlackFDA White
2mm
2,000mm
248 F120 C
NOVA 40 Green
HC BlackFDA White
4mm
2,000mm248 F120 C
NOVA 60 Green
HC BlackFDA White
5.5mm
2,000mm
248 F120 C
MATERIAL MAX. WIDTH TEMPERATURETHICKNESS
6
ALUMINUM EXTRUSION LINE
7
SAMPLA BELTING NORTH AMERICA LLC61 N Gates Ave, Lackawanna,
NY, 14218, U.S.A.Tel. +1 716 667 7450Fax: +1 716 667 7428
Email: [email protected]: www.sampla.us
CONVEYOR BELTS FOR ALUMINUM EXTRUSION