R
SPA
COSTRUZIONI METALLICHE STRUCTURAL STEELWORK
Page 1 of 3
GENERAL INFORMATION
The BIT GROUP consist of two companies: BIT S.p.A. and EUROTRAVI Srl. 1 - Name of Company : BIT SPA Address : Via Trieste,33 - 31016 CORDIGNANO (TV) Telephone : +39 0438 998811 Telefax : +39 0438 995410
P. IVA : 02048840264E-mail : [email protected]
Internet address : www.bitcostruzioni.com
Because of its geographical position, our company is easy to reach both from the Venice Airport – MARCO POLO (away about 40 minutes driving) or the train stations of Sacile or Conegliano (away only few minutes driving).Also the A27 Highway, which connect Venice to Conegliano and Vittorio Veneto (TV) is only 15 km away from BIT S.P.A.
2 - Turnover (gross sales 2013) € 36.504.352,00.- Revenue € 28.716.602,00.-(gross sales 2014) € 33.100.817,00.- € 37.538.872,00.-(gross sales 2015) € 30.419.288,00.- € 28.114.503,00.-
Registration SOA nr. 17092/4/00 dated 27.05.2016OG3 classification V° OS18-A classification VIII° (unlimited)
Registration at Chamber of Commerce of Treviso: nr. 02048840264 – R.E.A. 185060
3 - Share capital : € 1,200,000.00-
4 - Year of establishment : 1968Activity begin of steel working : 1950
5 - Number of employees : 105 staff
Professional staff - Total Workers 64- Total Employees 41 (Manager 1)
(Cadres 4) (Employees 36) Employees- 1 Managing Director- 9 Technical Department- 4 Production - 2 Quality System
Date: 20.07.2016Rev. 08
ISO 3834 Part 2Certificate n° IT – 2/IT/079
EN 1090-1:2009+A1:2011Certificate n° 0475–CPR–9
Page 2 of 3
- 6 Administration - 6 Purchasing and Shipments Department- 8 Sales Department- 5 Others
6 - Main productsa) Steel structures for civil, industrial and agriculture buildings, power plants;b) Steel structures for any type of industrial plants, as well as petrochemical, and thermal
plants;c) pipe racks;d) Railway and Road bridges, viaducts, pedestrian walkways;e) lattice steel towers for over-head transmission lines, for antennas, for telecommunication
and supports for light signals;f) beams and special welded profiles;g) bridge cranes and quay cranes, and special steel components.
All above listed products are self-produced.For some other peculiar products connected with our main production we may relate to some qualified sub-contractors.
7 -Areas of productionBIT S.P.A. has one production centre:it is about 60,000 square meters wide, 24,000 of which are covered and served by nr. 24 overhead travelling cranes up to 20 tons and n. 18 sliding cranes.
8- Production capacity: 24,000 tons per year.
9- EngineeringWe provide design, calculation and workshop drawings for all our products as above listed.We provide the engineering service directly through our inside technical office or through some of our qualified sub-suppliers specialized in a wide range of products design.
An IBM AS400 which include the ERP for the management of our Company, one FUJITSU BLADE server which include 12 VM servers (Windows server 2008 R2 + 2 LINUX MACHINES), 42 PC, and 14 printers (Laser, inc jet, and needles) and 9 multi function primer are connected to central computer and to blade server. Excel, Word, Project and Access programs are usually used for the routine works in the technical and commercial departments.We provide no-cost engineering for bids of steel structures for workshop buildings.We provide pre-order engineering consultation for all our activities at costs to be defined. We can provide detail drawings from specifications and sketches.We usually work with ITALIAN CODE (UNI), BRITISH CODE (B.S.), GERMAN CODE (DIN), FRENCH CODES, AMERICAN CODES. We can work with ASME CODE section IX, and U.B.C.
10- Inspection and testOur Quality Control Manager is qualified as 2nd level, according to ASNT-ASME, for the following n.d.t.:- U.S. test- penetrant test
Date: 20.06.2016Rev. 08
Page 3 of 3
- magnetic particle examination.He refers directly to the General Manager of the Company.We can perform all these tests with our own equipments.We subcontract the execution of x-ray test to an authorized Company.We can provide destructive testing using our:a) machinery "GALDABINI" for bending, resistance for tensile and compression stressb) impact test equipmentc) two hardometersd) apparatus to make test on galvanized areas
All the equipments are officially tested every 12 months by Italian Authorities and certificates are released.
11- Quality System and other certificationsSince 2001 Bit S.p.A. has been certified UNI EN ISO 9001 by DNV (DET NORSKE VERITAS ITALIA S.r.l.). We use the quality system in each stage of production in workshop and in site.
Bit S.p.A. has got a technologic laboratory with suitable equipments for destructive, nondestructive, impact and hardness tests.The instruments are controlled periodically and calibrated by external specialized agencies which issue the relative certificates.Moreover we supply the ironworks certificates of the used materials and if it is necessary we are able to confirm the same ones using our spectrometer.Our technicians can make the following controlls as they have got the ASNT Licence of 2° level:A) Penetrant liquidB) UltrasoudC) Magnaflux
We entrust radiographicals checks to external specialized agencies.
Our welding processes, like arc welding, submerged arc welding and MAG welding, are approved by Registro Navale Italiano, Loyd’s Register of Shipping and Istituto Italiano della Saldatura.
BIT Spa has achieved the following certifications:- UNI EN 1090/1-2 Fabrication process of welded steel structures- UNI EN ISO 14001 Environmental management system- OHSAS 18001 Health and Safety Management SystemMoreover BIT Spa is part of the CE List directly controlled by the CSLP (Superior Council for Public Works) as per DM 14.01.2008.
We usually work with the following standards and international rules:- UNI- DIN- B.S.- EN- ASME- Standards and specifications of FF.SS. and ENEL
Date: 20.07.2016Rev. 08
OurCertificates
Some of our most important jobs carried out in the last few years
Section: Bridges
Year 2015 - 2016
Job’s Description Viaduct FARMA – Road E78 – Construction of the 4th
lane between Grosseto and Siena
Place of execution Civitella Paganico (GR) - Italy
Total weight 1.800 TON
Year 2016
Job’s Description PISA MOVER – Subspended Monorailway
Trasportation system
Place of execution Pisa - Italy
Total weight 550 TON
Year 2015
Job’s Description Pedestrian Bridge
Place of execution Cordignano (TV) - Italy
Total weight 16 TON
Year 2014
Job’s Description N. 2 cycling – pedestrian bridges over the railroad
Pioltello – Treviglio (BG)
Place of execution Treviglio (BG) - Italy
Total weight 140 ton
Year 2014
Job’s Description Bridge over A22 Brennero’s Highway
Place of execution Rovereto (TN) - Italy
Total weight 430 TON
Year 2013
Job’s Description Arc Bridges on the railroad Thenia – Tizi Ouzou
Place of execution Algeria
Total weight 800 TON
Year 2010
Job’s Description PEOPLE MOVER - Subspended Monorailway
Trasportation system Place of execution Venice (Italy)
Total weight 1.700 TON
Section: Buildings Year 2015
Job’s Description Widening of Lamination Industrial Building
Place of execution Padova - Italy
Total weight 850 TON
Year 2015
Job’s Description UNICREDIT Multi-functional Building - MILAN
Place of execution Milan - Italy
Total weight 100 TON
Year 2014
Job’s Description PRADA Museum – Building J
Place of execution Milan - Italy
Total weight 500 TON
Year 2014
Job’s Description Tower Building “Bank Intesa-San Paolo” (Turin)
Place of execution Turin (Italy)
Total weight 6.000 TON (BIT) – total weight 15.000 TON
Year 2011
Job’s Description Parliament Building – Malta
Place of execution La Valletta (Malta)
Total weight 1.500 TON
Year 2010
Job’s Description New High Speed Train Station ” Turin Porta Susa”
Place of execution Turin (Italy)
Total weight 3.000 TON
EC
CS
AW
AR
D 2
013
EU
RO
PE
EA
N D
ES
IGN
AW
AR
D 2
013
Year 2008
Job’s Description Pavilions nr. 14-15 / New Trade Center in Bologna
Place of execution Bologna (Italy)
Total weight 2.500 TON
Year 2006
Job’s Description Pavilions / New Trade Center in Rome
Place of execution Rome (Italy)
Total weight 2.200 TON
Year 2004
Job’s Description Nr. 2 Pavilions/ New Trade Center in Milan- Rho Pero
Place of execution Rho-Pero (Milan) - Italy
Total weight 7.200 TON
Section: Buildings for PowerPlants Year 2016
Job’s Description Project TEMPA ROSSA –
Structures for oil extration
Place of execution Corleto Perticara (PZ) - Italy
Total weight 7.000 TON
Year 2014
Job’s Description Denox structures for power plant
Place of execution Monfalcone (GO) - Italy
Total weight 980 TON
Year 2015
Job’s Description Structures for Biomass Plant - Snetterton
Place of execution United Kingdom
Total weight 660 TON
Year 2014
Job’s Description Structures for Biomass Plant - Lisbjerg
Place of execution Denmark
Total weight 720 TON
Section: Special Components
Year 2015
Job’s Description Structures for DERRIK
Place of execution S. Petersburg - Russia
Total weight 180 TON
Year 2015
Job’s Description Isozaki Tower
Place of execution Milan
Total weight 50 TON
Year 2013
Job’s Description MOSE Project
Place of execution Venice - Italy
Total weight 34 TON
Year 2013
Job’s Description MOSE Project – rail-rack for structures’ movement,
inspection’s towers and sealing entrances
Place of execution Venice - Italy
Total weight 850 TON
Section: Lattice Steel Towers Year 2015
Job’s Description Lattice steel tower for cableway
Place of execution Austria - Stubai
Total weight 450 TON
Year 2012
Job’s Description Lattice steel tower for cableway
Place of execution France
Total weight 100 TON
Year 2011
Job’s Description Lattice steel towers for electricity’s transportation -
lines 110/220/380 kV Limberg - Schaufelberg
Place of execution Austria
Total weight 2100 TON
BIT SPACOSTRUZIONI METALLICHE
STRUCTURAL STEELWORK
R
SPA
31016 Cordignano (Treviso) ItalyVia Trieste, 33Tel. ++39.0438.998811Fax ++39.0438.995410www.bitcostruzioni.come-mail: [email protected]