JAMB OPENING WIDTH
JAMB OPENING HEIGH
UNDERCUT
FINISHED FLOOR
JAMB OPENING SIZE
WIDTH ROUGH OPENING:
OVERALL FRAME PLUS 1W ALL AROUND TO ALLOW FOR FRAME SHIMS.
HEIGHT
□ 4" □ 2"
1/8" GAP
UNDERCUT HAND OF ACTIVE DOOR
CHEMPRUF STANDARD HARDWARE LOCATIONS WILL BE PROVIDED UNLESS CUSTOMER SPECIFIES OTHERWISE.
* SPECIFY
�
FRAME THROAT 1
1• STANDARf
□ :JJB8P.* 0..EMIEO
05/8"
'
JAMB/FACE DEPTH
•
UJ (!) 0 UJ UJ (!) z
:i: \1S&E I
CUSTOM SIZES:
�
EDGE
UJ (!) 0 UJ � u
VISIBLE WIDTH ____ _ VISIBLE HEIGHT ____ _ TOP TO VISIBLE ____ _ EDGE TO VISIBLE ____ _ □ CENTER HORIZONTALLY
GLAZING:
STANDARD 1/4" GLASS SIZES:□ 8 x 30 (6-1/2 x 28-1/2 VISIBLE)
□ 12 x 12 (10-1/2 x 10-1/2 VISIBLE)□ 24 x 24 (22-1/2 x 22-1/2 VISIBLE)
□ 24 x 30 (22-1/2 x 28-1/2 VISIBLE)
GLAZING TYPE AND THICKNESS: 2"
□ □ LOUVER SIZE
□□ BOTTOM □ � 10" STD
INTERIOR VIEW EXTERIOR VIEW LOUVER SIZE
□ ACTIVE LEAF
□ INACTIVE LEAFBOTTOM
� 10"STD □ BUG SCREEN
□ BY CHEMPRUF □ BY OTHERS □ ACTIVE LEAF
□ INACTIVE LEAF□ FLAT BLADE OvBLADE
LOUVER
SIZE: ______ CHEMPRUF ST AND ARD SIZES ARE 18x18, 24x18, 24x24.
VISION LIGHT
DOUBLE DOOR AND FRAME
CUSTOMER:
PROJECT: DOOR MARK: 5224 FM 802 Brownsville, TX 78521
P: 800.444.6924 [email protected]
www.chem-pruf.com
20MIN _30MIN _45MIN _
60MIN _ 90MIN _
DESIGN PRESSURE ---'P"-"S"'-F
CHEM-PRUF P-SERIES DOUBLE DOOR &
FRAME ORDER FORM
POLAR WHITE
MIST GRAY
PRIMER, FOR FIELD PAINTING
* All colors have a semi-gloss finish
CASHEW TAN
OTHER
HEAVY DUTY
EXTREME DUTY
FIRE RATED
WIND LOAD RATED
COLOR
1/4" TEMPERED
1/4" LAMI
1/4" LEXAN
CUTOUT ONLY (NO KIT)
OTHER
CUSTOMERNOTES:
WALL TYPE
NEW MASONRY
EXISTING MASONRY
STEEL CHANNEL
WOOD/METALSTUD
WOOD/METALSTUD
WIRE ANCHORS
T ANCHORS
CRETEFLEX#14-10 x 4” FPH SS
SLEEVE ANCHOR3/8” x 5” FHSLV SS
SS SCREW#14 x 4” FLAT HEAD SMS
SS MACHINE BOLT3/8” x 4“ WITH NUT & WASHER
SS SCREW#14 x 3” FLAT HEAD SMS
HEAD HEIGHT FRAMECONFIGURATION
*MAKE & MODEL REQUIRED
4- 1/2” MORTISE HINGES
# OF HINGES: 3 4 5
STD WEIGHT HEAVY WEIGHT
5” MORTISE HINGES # OF HINGES:
HARDWARE PREPARATIONS
CYLINDRICAL 161 LOCK
CYLINDRICAL DEADBOLT
NO PILOT HOLES
WITH PILOT HOLES,TEMPLATE REQUIRED WITH P.O.
3 4 5
STD WEIGHT HEAVY WEIGHT
MORTISE DEADLOCK*
MORTISE 86 LOCK
MORTISE EXIT DEVICE
RIM EXIT DEVICE
SVR EXIT DEVICE
CVR EXIT DEVICEW/O FUNCTION HOLES
WITH FUNCTION HOLES, TEMPLATE REQUIRED WITH P.O.
CLOSER REINFORCEMENT RA/PA
PUSH/PULL REINFORCEMENT
SURFACE OH HOLDER/STOP REINFORCEMENT
CONCEALED OH HOLDER/STOP
SURFACE DOOR BOTTOM REINFORCEMENT
CONCEALED DOOR BOTTOM
SURFACE BOLT REINFORCEMENT
MANUAL FLUSH BOLTS
AUTOMATIC FLUSH BOLTS(wood type only)
FRP ASTRAGAL (installed on INA leaf STD)
OTHER
TOP ONLY TOP & BOTTOM
MEASURED FROM INTERSECTION OF JAMB
& HEADER
STD
TOP ONLY TOP & BOTTOM
CONTINUOUS HINGE REINFORCEMENT
