RECONDITIONING OEM CERTIFIED
EASIER FASTER BETTER
CHEAPER
NO LOSS OF QUALITY OR CONSISTENCYNO MINIMUM QUANTITIES OR OTHER INCONVENIENCES FEWER HEADACHES UNMATCHED RESPONSIVENESS
Original tool performance is achieved only through OEM certifi ed reconditioning.
OEMs such as SANDVIK MITSUBISHI SUMITOMO and others recognize Alliance Innovative through certifi cation as a national factory authorized sharpening center for carbide drills.
DRILLS ENDMILLS REAMERS ROUGHERS COUNTERSINKS TAPS SANDVIK CARBIDE TIP HIGH PERFORMANCE HSS SPLIT POINT / PARABOLIC
Reconditioning superiority is achieved through OEM authorized drill tip software, CNC control, virtually every coating available, and over 30 years of cutting tool experience.
Alliance Innovative uses only cutting edge 8 Axis CNC tool & cutter grinders linked with the latest optical video inspection systems for quality assurance and consistent reconditioning every time.
What that means: You get consistent, familiar, superior performance from your tooling over the entire life of the tool.
OEM Certifi cation is granted only after a rigorous inspection process performed by the tool OEM.
OEM certifi cation means your tooling is returned to original condition and original performance.
Alliance Innovative utilizes the worldleaders in coating technology. Through our long-standing relationships with multiple coating facilities, Alliance Innovative can facilitate superior tool coating service and turnaround.
YGTITEX / 3FL SUMITOMO SGS / 3FL SECOSANDVIK RTWPTDOSGMITSUBISHIMA FORDKOMETKENNAMETALINGERSOLLHERTELGUHRING / 3FLGARRFULLERTONDORMERDIJETCLEVELANDCJTACCUPRO
Rou
nd
Inse
rts
Rou
nd
Cut
ting
Tool
s
Inse
rts
Carbide
HSS
Carbide
HSS
toolbox ALLI
ANCE INNOVATIVE RECONDITIONING
CUTTING TOOL
CERTIFIED QUALITY
reconditioning
▼FILL
dull tooling
Hunting and gathering tooling for reconditioning, sorting it, packaging it, itemizing purchase orders...
All of these things are keeping you from doing what you want to be doing and also slow down the entire processs of recondtioning your worn tooling.
We can help contain the chaos. Alliance Innovative’s toolbox is the fi rst step in the reconditioning process.
The only thing you need to do is keep it in your shop and fi ll it with worn tooling. Then, just send it to us--we take care of the rest.
▼
GET
reco
nditi
oned
tool
ing
sorte
d cl
eane
d co
ated
in p
rote
ctiv
e tu
bes
ALLI
ANCE INNO
RECONDITIONICUTTING TO
What size is toolbox?
Small (1 Gallon) Medium (3 Gallon) Huge (10 Gallon)
What’s Inside toolbox? Shock absorbent foam padding to provide a soft landing every time, lid ties, and plenty of room for your tooling.
Carbide tooling will be returned to you in labeled protective tubes. If a damaged tube crosses our path, it will be replaced with a fresh tube.
Just Fill. We do the sorting and provide an itemized quote. If you prefer to sort before you send, we send a matching confi rmation.
Now you can focus on what matters most to you. The toolbox streamlines tool management between your shop and ours while providing additional protection for your valuable tooling.
What do I do with the toolbox on our end? Keep it in your shop or tool crib as one central location to deposit spent tooling.
Do I have to fi ll our toolbox all the way before sending? Send your tooling for reconditioning when you are ready. Send it half full or keep it as long as you need. For very small orders, you can use our padded reconditioning toolbag or your own packaging.
How do I get the right toolbox for me? We will chose the right toolbox size and quantity for you based on the size of your order. You can change this at any time by requesting a specifi c size and quantity.
8 Axis CNC Reconditioning. The highest quality coatings available. OEM Certifi ed drill reconditioning. Program-controlled reconditioning of endmills, reamers, a wide variety of inserts, and virtually any other cylindrical cutting tool.
Organized.Effi cient. Correct.
It’s how we do things.
PrintsSpecs
Digital photos of tools for modifi cationDigital photos of parts for reverse tool engineering
We can work from
}8AXISCNC
CUSTOMTOOLING Special manufacture round tooling from solid using various grades of carbide, cobalt, and high speed steels in solid and coolant-through.
Modifi cationsSpindownsStepsRadiusesChamfers
DrillsReamers
Form EndmillsPorting Cutters
Radius ToolsStep Endmills
Step DrillsPrototypes
WHETHER YOU ARE A CUTTING TOOL MANUFACTURER LOOKING FOR A BACKUP PRODUCER OR A GENERAL MANUFACTURER IN NEED OF SPECIALTY TOOLING, WE ARE YOUR SOURCE
major & minor modifi cations
As the Cutting Tool Services division approached its 20th anniversary, we embarked on a plan to rebuild or replace every machine in our shop. Through our partnership with ANCA, we have done just that.
All tooling is produced on CNC tool and cutter grinders equipped with on-board optical measurement and inspection equipment.
Offl ine 3D simulation software allows for “full and true 3D simulation of the grinding process.”
Alliance Innovative can achieve advanced tool modeling and design without taking any machine off production.
In the process of upgrading and overhauling our production equipment, we made some special investments:
TOGETHER WE CAN CREATE THE RIGHT TOOL FOR YOUR APPLICATION.
ALLI
ANCE
INNOVAVV TA IVE
AXPERIPHERAL MILLING
ISADVANCED BALL TECHNOLOGY
CUSTOM ENGINEEREDTo work in tandem with your 5-axis milling software.
Custom manufactured; CNC reconditioned. When we handle the complete lifecycle you are guaranteed a consistent, high quality product.
EXPERTLY MANAGED TOOL LIFECYCLE
Dgggggg
OOOONNONOOO
ssso
L
wwtwwwaaaawarre
CONSISTENCY.
Even custom tools have standard features. Every AXIS tool features superior grade carbide with unmatched durability and performance. AXIS can also be manufactured from HSS or cobalt. Every tool is subject to our special CNC hone • technique for improved performance and wear-ability. Better profi le fi nishes for better blade fi nishes.• Enhanced 3 & 4 fl ute cutting geometries for better • chip evacuation.
After nearly 20 years of expertise producing and reconditioning tooling for the turbo blade and impeller industries, we can guarantee a few things about every single AXIS tool.
Ball Radius Tolerancefor consistent blade thickness
Concentricity for higher RPM and feed rate productivity
CoatingThe highest quality high performance available
capabilities
LOC: AnyOAL: 1-1/2” - 16”+Flutes: AnyRadius: AnyShank: .125” - 2.500”Taper Per Side: Any
Ball Technology Milling Peripheral Milling
CHIPBREAKERCHIPBREAKER DESIGN EXTENDS THE LENGTH OF THE FLUTE / EASES CHIP EVACUATION
Solid MG18-TSM 33 carbide for durability Machine honed for consistency Tube sheet sizes available Complex Geometries Coolant-thru design
Produces a greater quantity of smaller chips, each taking a portion of the generated heat, keeping the drill cooler longer.
Corner break at fl ute edges produces cleaner holes and prevents chip out at the edges of a hole
CUSTOM PERFORMANCECUSTOM SIZES
FOR NEARLY THE SAME COST AS AN INFERIOR TOOL
CONTACT US FOR FEEDS & SPEEDS
Reconditioning & Custom Tooling to your specifi cations
Every brand and nearly every round tool serviced
100% CNC operations, no imprecise manual equipment
Tool sorting and itemized paperwork upon receipt
Hard plastic tool tubesHard plastic Toolbox tote
Off-line simulation softwareOn-board inspection
Two week turnaround on most orders
Fair, stable pricing Consistent service & quality
Confi rmations, Notifi cations Status Updates
100% Inspection
OEM Certifi edISO9001/AS9100 Certifi ed
AB
OU
T
Because we are certifi ed by companies like Sandvik, Titex, Mitsubishi and more, you get original tool quality and consistency with every regrind.
We can be your one stop shop to avoid sending drills back to multiple OEMs to receive original points.
Our fair pricing remains stable for years at a time, ensuring the value of your reconditioning revenue stream for the long-term.
We confi rm all details of a job with you before proceeding, or if you provide blanket approval we proceed immediately to save time. We can provide any status information you need without you needing to ask.
We sort your tools, automatically provide hard plastic shipping totes and fresh tool tubes when one is damaged, and can provide customized tool labels upon request.
All of our machines are now equipped with the latest technology, allowing horsepower to be pushed to extremes unachievable before. All machines are networked and are now virtually interchangeable for extreme fl exibility and effi ciency.
Off-line simulation software linked to our machines allows us to do set up and prototyping offl ine, freeing up machine time. On board tool inspection creates additional time savings. It all adds up.
All of this made two of our old offerings possible again: The two-week turnaround guarantee on almost every order, and the one-week urgency service for rush orders.
PARTNERSHIPSMore Than Just A Regrind House
With a comprehensive service approach, fast turnaround, exceptional value, and unmatched quality, Alliance Innovative has earned a reputation for excellence in cutting tool services.
Alliance Innovative has over twenty years of experience building partnerships with regional, national, and international cutting tool OEMs, industrial distributors, integrated suppliers, cutter grinding, honing and tool marking OEMs, and major manufacturers in nearly every fi eld of manufacturing. Our partnership capabilities are detailed below.
Branded Reconditioning Let us be your “in-house” reconditioning program.
Most OEMs today have a reconditioning program for their carbide drills and other tooling. Many use a network of service partners rather than truly performing the work “in house.” Few can perform reconditioning work as quickly and effi ciently as Alliance Innovative.
Whether you are an international brand looking for a domestic reconditioning partner, a domestic brand keeping equipment focused on producing new tooling, or any brand interested in developing a reconditioning program, we can help.
Production Partner / Private Label Tooling
Alliance Innovative can be your design and production partner for the entire range of production and distribution formats, from direct catalog sales to industrial distribution. Companies come to Alliance Innovative with the following objectives:
Dual Sourcing: Spread the risk of an • existing tool lineSupplemental Production: • Supplement your in-house capacity by outsourcing to us Catalog Expansion: Offer tooling • beyond standard Drills and Endmills, such as High- Performance tooling and Non-standard sizesPrivate Label Tooling: Industrial • distributors and others without production capabilities interested in a house line of tooling or custom tool offerings
Alliance Innovative Offers:
Tool design consultation• ISO9001/AS9100 Certifi ed • ProcessesLasermarking, Brandable tool • packaging, Other packaging options availableBarcoding•
Made to Order or Make to Stock • production formatsLean Production / JIT• Flexible inventory management •
Production Forecasting• Dedicated Capacity• Private Drop Shipping• NDA•
Alliance Innovative achieved ISO9001 and AS9100B certifi cations in 2007, the highest quality and effi ciency certifi cations in the manufacturing industry.
Certifi cation was granted after 10 months, less than half the 18-24 months it normally takes to establish an operational quality management system and achieve both certifi cations simultaneously.
The fast accomplishment was particularly noteworthy considering it occured at the same time as a corporate acquisition, Lean Manufacturing consultation, and relocation to a new facility, all of which kept the company moving at a frenetic pace.
In 2010 Alliance Innovative revised its Quality Management system to be in compliance with AS9100 Revision C. The company received certifi cation to the new AS9100 revision at the close of 2011.
A+QUALITY
AS
9100 C
ER
TIFIED
ISO
9001W
e understand that your priority is to get the best price, but it does not have to be at the expense of quality. C
ontinual improvem
ent agendas are aim
ed at reaching near-perfect effi ciency, so the vendor focused on long-term
continual improvem
ent will be the
vendor who can m
ost consistently save your company m
oney while
also keeping the engineering and quality control staff satisfi ed.
LAB EQUIPMENT
STARRET RGC-4028-24 STATIONARY CMM
ROMER ABSOLUTE PORTABLE CMM
AS9100ISO9001ITAR
716.822.1626
1 Alliance Drive Buffalo, NY 14218
For the latest information about A
lliance Innovative
including the
most
current equipm
ent list,
capabilities, and
latest new
s, visit us at ww
w.allianceim
i.com
REVISED 09/08/14