®
lbfoster.com
CXT® CONCRETE TIES CATALOG
CXT® Concrete Ties®
®
lbfoster.com
L.B. Foster offers a complete line of CXT® concrete railroad ties. Our catalog of concrete ties includes standard track, turnout, gantry and specialty ties, such as guard rail, restraining rail and grade crossing ties. All CXT concrete ties are designed in accordance with AREMA specifications and can be customized to meet customer requirements.
CXT concrete ties will improve reliability of existing tracks and build longterm performance into tomorrow’s industrial applications, shipping ports, transit systems and high speed trains. L.B. Foster’s dedicated sales and engineering staff can work closely with you to optimize tie design and develop spacing based on axle load impact, speed and tonnage.
Our concrete ties are engineered to require minimum maintenance to maintain track gauge in the harshest conditions over long periods of time. CXT concrete ties have high flexural strength and are developed to work in conjunction with their fastening system and track ballast to resist lateral, longitudinal and vertical movement.
When compared to a traditional wood and steel ties, CXT concrete ties will provide longer in-track life and reliability. Cost benefits can also be realized with the increased tie spacing of concrete ties when compared to wood or steel ties.
CXT concrete ties are manufactured at strategically located facilities in Spokane, Washington and Tucson, Arizona. These plants are ISO 9001:2008 certified and produce a complete series of concrete ties for all applications.
ISO 9001:2008 Certified
CXT® Concrete Ties — Specifications
Elastic Fastener System: Fastclip
Design Weight: 610 lbs
Length: 8’ 3”
Flexural Strength: Railseat positive 278 in-kipsCenter negative 153 in-kips
Tie Spacing: Meets AREMA structural performance criteria for tie spacing from 24” to 30” on center
Concrete: 7,000 psi minimum 28 day compressive strength with air entrainment
Pad: 6.5 mm pad
Rail Seat Cant: 1:40
Rail Section: 115 lb rail or other 5½” base rail sections
Elastic Fastener System: Fastclip
Design Weight: 610 lbs
Length: 8’ 3”
Flexural Strength: Railseat positive 278 in-kipsCenter negative 153 in-kips
Tie Spacing: Meets AREMA structural performance criteria for tie spacing from 24” to 30” on center
Concrete: 7,000 psi minimum 28 day compressive strength with air entrainment
Pad: 6.5 mm pad
Rail Seat Cant: 1:40
Rail Section: 136 lb rail or other 6” base rail sections
Elastic Fastener System: e-Clip
Design Weight: 595 lbs
Length: 8’ 3”
Flexural Strength: Railseat positive 268 in-kipsCenter negative 150 in-kips
Tie Spacing: Meets AREMA structural performance criteria for tie spacing from 24” to 30” on center
Concrete: 7,000 psi minimum 28 day compressive strength with air entrainment
Pad: 6.5 mm pad
Rail Seat Cant: 1:40
Rail Section: 115 lb rail or other 5½” base rail sections
Specifications for reference only.
100-06 CONCRETE TIE 100S-09 CONCRETE TIE
429-20 CONCRETE TIE
Elastic Fastener System: e-Clip
Design Weight: 610 lbs
Length: 8’ 3”
Flexural Strength: Railseat positive 277 in-kipsCenter negative 152 in-kips
Tie Spacing: Meets AREMA structural performance criteria for tie spacing from 24” to 30” on center
Concrete: 7,000 psi minimum 28 day compressive strength with air entrainment
Pad: 6.5 mm pad
Rail Seat Cant: 1:40
Rail Section: 136 lb rail or other 6” base rail sections
419-22 CONCRETE TIE
2
CXT® Concrete Ties®
lbfoster.com
CXT® Concrete Ties — Specifications
Elastic Fastener System: Safelok I
Design Weight: 700 lbs
Length: 8’ 6”
Flexural Strength: –Railseat positive 319 in-kips–Center negative 218 in-kips
Tie Spacing: Meets AREMA structural performance criteria for tie spacing from 24” to 30” on center
Concrete: 7,000 psi minimum 28 day compressive strength with air entrainment
Pad: 8.0 mm pad
Rail Seat Cant: 1:40
Rail Section: 136 lb rail or other 6” base rail sections
Elastic Fastener System: Safelok III
Design Weight: 700 lbs
Length: 8’ 6”
Flexural Strength: –Railseat positive 319 in-kips–Center negative 218 in-kips
Tie Spacing: Meets AREMA structural performance criteria for tie spacing from 24” to 30” on center
Concrete: 7,000 psi minimum 28 day compressive strength with air entrainment
Pad: 7.5 mm – 3-part pad
Rail Seat Cant: 1:40
Rail Section: 141 lb rail or other 6” base rail sections
Elastic Fastener System: e-Clip
Design Weight: 700 lbs
Length: 8’ 6”
Flexural Strength: Railseat positive 312 in-kipsCenter negative 217 in-kips
Tie Spacing: Meets AREMA structural performance criteria for tie spacing from 24” to 30” on center
Concrete: 7,000 psi minimum 28 day compressive strength with air entrainment
Pad: 5.0 mm pad
Rail Seat Cant: 1:20
Rail Section: 136 lb rail or other 6” base rail sections
Elastic Fastener System: e-Clip
Design Weight: 530 lbs
Length: 6’
Flexural Strength: Center negative 152 in-kips
Tie Spacing: 24” on center
Concrete: 7,000 psi minimum 28 day compressive strength with air entrainment
Pad: 9.0 mm pad
Rail Seat Cant: Flat
Rail Section:135 lb crane rail 171 lb crane rail175 lb crane rail
Specifications for reference only.
200S-13 CONCRETE TIE 200S-50 CONCRETE TIE
CT6S-66 CONCRETE TIE 399-21 CONCRETE TIE
3
Elastic Fastener System: Safelok III
Design Weight: 735 lbs
Length: 8’ 6”
Flexural Strength: Railseat positive 381 in-kipsCenter negative 224 in-kips
Tie Spacing: Meets AREMA structural performance criteria for 24” on center tie spacing
Concrete: 7,000 psi minimum 28 day compressive strength with air entrainment
Pad: 7.5 mm – 3-part pad
Rail Seat Cant: 1:40
Rail Section: 141 lb rail or other 6” base rail sections
Specifications for reference only.
505S-50 CONCRETE TIE
Elastic Fastener System: e-Clip
Design Weight: 610 lbs
Length: 8’ 6”
Flexural Strength: Railseat positive 280 in-kipsCenter negative 157 in-kips
Tie Spacing: Meets AREMA structural performance criteria for 24” to 28” on center tie spacing
Concrete: 7,000 psi minimum 28 day compressive strength with air entrainment
Pad: 6.5 mm pad
Rail Seat Cant: 1:40
Rail Section: 100 lb rail115 lb rail or other 5½” base rail sections136 lb rail or other 6” base rail sections
529S CONCRETE TIE
Elastic Fastener System: e-Clip
Design Weight: 700 lbs
Length: 8’ 6”
Flexural Strength: Railseat positive 319 in-kipsCenter negative 205 in-kips
Tie Spacing: Meets AREMA structural performance criteria for 24” - 30” on center tie spacing
Concrete: 7,000 psi minimum 28 day compressive strength with air entrainment
Pad: 5.0 mm pad
Rail Seat Cant: 1:40
Rail Section: 136 lb rail or other 6” base rail sections
200S-67 CONCRETE TIE
Elastic Fastener System: Vossloh
Design Weight: 710 lbs
Length: 8’ 6”
Flexural Strength: Railseat positive 319 in-kipsCenter negative 205 in-kips
Tie Spacing: Meets AREMA structural performance criteria for 24” - 30” on center tie spacing
Concrete: 7,000 psi minimum 28 day compressive strength with air entrainment
Pad: Vossloh
Rail Seat Cant: 1:40
Rail Section: 115 lb rail or other 5½” base rail sections136 lb rail or other 6” base rail sections
200S-V1 VOSSLOH CONCRETE TIE
CXT® Concrete Ties — Specifications
4
CXT® Concrete Ties®
lbfoster.com
CXT® Concrete Ties — Specifications
• CXT Concrete Ties can be coated with epoxy or polyurethane at customer’s request.
• Flexural strength is determined by AREMA specifications based on speed, tonnage and tie spacing.
• The Fastclip, Safelok III and Vossloh are fully captive (clip, pad and insulator are pre-installed by the manufacturer prior to shipment).
• The Safelok I is semi-captive (clip and pad are pre-installed by the manufacturer prior to shipment).
• Custom ties made to your design application.
• CXT can customize our concrete ties for most rail sections using specialized insulators.
e-Clip, Fastclip or Safelok fastening systems available 6” or 5 1/2” rail base
GUARD RAIL TIE
CROSSING RAIL TIE
e-Clip, Fastclip or Safelok fastening systems available 6” or 5 1/2” rail base
Specialty Ties
e-Clip, Fastclip or Safelok fastening systems available 10’ grade
LVT BLOCK
e-Clip, Fastclip, Safelok or Vossloh fastening any rail base can be accommodated
APPLICATIONS FASTENING SYSTEMS
Tie Transit Industrial /Port
Mainline (Low
Density)
Mainline(Heavy Haul)
Gantry e-Clip Fastclip Safelok l Safelok lll Vossloh
100-06 n n n n
100S-09 n n n n
429-20 n n n n
419-22 n n n n
200S-13 n n n n
200S-50 n n n
CT6S-66 n n n n
399-21 n n
505S-50 n n n n
529-S n n n n
200S-67 n n n n
200S-V1 n n n n n
RESTRAINING RAIL CONCRETE TIE
5
Turnouts and Crossing Trackwork
Turnouts, crossovers and double crossovers are available in the following sizes:#6, #7, #11, #14, #15, #20, #24 and #30
Formations
Tie spacing: Ties are spaced 30” on center between switch and frog and at least 24” or greater in the switch and frog. This reduces the number of ties in a typical turnout by approximately 25% and less ties require fewer special trackwork plates and reduces the installation cost.
TURNOUTS
STRAIGHT CROSSING
FROG CROSSINGUNDER 30˚
RIGHT HAND CROSSOVER
LEFT HANDTURNOUT
EQUILATERAL TURNOUT
LEFT HAND CROSSOVER
RIGHT HAND TURNOUT
THREE-WAYTURNOUT
DOUBLETURNOUT
6
CXT® Concrete Ties®
lbfoster.com
Fastening Systems
e-CLIP – STANDARD ELASTIC FASTENING SYSTEM FASTCLIP – FULLY CAPTIVE FASTENING SYSTEM
SAFELOK III – FULLY CAPTIVE FASTENING SYSTEMSAFELOK I – SEMI-CAPTIVE FASTENING SYSTEM
VOSSLOH FASTENING SYSTEMS
FASTCLIP FE SYSTEMS
7
REMOTE MONITORING IMPROVES CONCRETE TIE LIFE CYCLE MANAGEMENT
CXT RFID Tracker Concrete Tie
L.B. Foster is casting an integrated circuit chip into a specialized CXT concrete tie to provide Radio Frequency Identification (RFID) of their product for remote monitoring applications. All associated component attributes are easily retrievable in real time, enabling more efficient supply chain and product life cycle management. This remote system track a tie’s location from manufacturing through customer inventory to track installation.
A remote search by product type, serial number or specification will return a geographic location of each tie with GPS coordinates. The search can determine tie type, reinforcement characteristics, customer and internal specifications, fastening components, material composition and part drawings.
The CXT RFID Tracker is a passive transponder and chip cast into the top surface of the concrete tie under approximately one-eighth inch of grout cover. The chip is embedded in a polymer laminate that is waterproof, shock and impact resistant, and UV protected. It has memory retention of 50 years and features an optical barcode and human-readable backup. The RFID Tracker has an operating temperature range of -50 C to +85 C.
Each time the RFID tie is scanned, information such as, date, time, user ID, and GPS coordinates are uploaded to a database via a wireless network or Wi-Fi internet connection and associated to the tie’s unique serial number. Online map indicators present GPS coordinates of a product search query and provide detailed product information for the user.
Data capture in the plant is via mobile handheld devices, such as Apple iPads. Personnel can easily retrieve relevant drawings and specification documentation from the engineering database. In track, automated RFID readers are attached to rail mounted equipment. CXT’s RFID Tracker will increase the railroads’ productivity by improving communication between all the players in the product life cycle.
EASILY ACCESSED PRODUCT DATA
• CXT concrete tie type• Reinforcement characteristics• Customer and internal specifications• Fastening components• Raw materials (aggregate, cement)• Part drawings
PRODUCT BENEFITS
• Accessible product data• Efficient inventory control• Improved maintenance• Optimal life cycle management• Online map location
8
CXT® Concrete Ties®
lbfoster.com
Industrial and Port Facility Track Structures CXT® CONCRETE TIES ADD SUSTAINABILITY AND LESSEN COST FOR INDUSTRIAL AND PORT PROJECTS
For more than two decades L.B. Foster has worked closely with owners and engineering firms to standardize CXT concrete tie design that is environmentally-sound, economically-effective and provides proven life cycle cost benefits.
Our CXT industrial ties offer solutions that save time and money while providing a better track structure compared to that of wood or steel ties. CXT concrete ties also have the flexibility to be customized to meet our customers specific requirements.
CXT concrete ties can provide an estimated cost savings of 10% to 15% when compared to timber ties using conventional track construction methods. When mechanized track laying systems are used, the CXT expense can be as much a 20% to 30% lower than wood ties. Life cycle maintenance expenses for concrete ties are also lower than wood tires.
Our concrete ties are more environmentally-friendly than wood ties. Greenhouse gas emissions associated with the manufacture and life cycle of concrete ties appear to be less than those produced by timber ties. CXT concrete ties also require no toxic preservatives and avoid the disposal issue associated with treated timber ties removed from service.
CXT fully pre-stressed concrete ties have a minimum
length of 8’3’’, weigh 600 pounds or less and can be
spaced up to 28” centers provided there is a minimum
ballast section of 8” below the tie. CXT concrete ties
have been used on major West Coast and Columbia
River port projects, food processing plants, oil
refineries, cement plants, landfills, wood processing
plants, intermodal facilities, coal fire generation plants,
ethanol plants, and coal and ore mines.
9
Speed (mph)
Tie Spacing
24” 26” 28” 30”
10 70 65 55 50
15 70 65 55 50
20 70 65 55 50
25 65 60 50 45
30 60 55 45 40
40 50 45 35 30
50 40 35 30 25
60 35 30 20 15
70 30 20 15 N/A
80 20 15 N/A N/A
Note: These allowances are exclusive to the tie design and do not take into consideration other factors such as subgrade condition, ballast pressure, ballast type and ballast section, which may limit tie spacing or speed from the values shown.
Sustainable CXT® Concrete Tie TechnologyCXT Concrete Ties offer a sustainable alternative to other types of ties currently used in the North American rail industry. Concrete ties provide superior environmental and energy benefits in their manufacturing and use.
ENVIRONMENTALLY FRIENDLY PRODUCT DESIGN
• Concrete ties are not treated with any chemi-cals that have the possibility of leaching into the ground.
• The steel clips, castings and inserts, as well as steel wire reinforcement, are manufactured using up-wards of 90% recycled scrap steel.
• Concrete ties can be crushed and all components can be recycled.
1. Produced with environmentally friendly concrete.
• No creosote or residue
• Lower carbon footprint compared to wood
2. Castings, clips and inserts are made from recycled scrap steel.
3. Reinforcing steel wires are made from recycled scrap steel.REDUCED GREENHOUSE GAS (GHG) EMISSIONS
• The manufacturing and use of concrete ties can result in one-half to as little as one-sixth the amount of GHG emissions associated with the use of wood ties over their expected life.
• A variety of factors provide this advantage:• Depletion of critical natural resources• Greater track strength (requiring fewer ties per
length of track)• Mining and use of raw materials to produce
concrete ties vs. timber harvesting• Lower maintenance requirements
Energy Savings
• Track constructed using concrete ties is stiffer, providing a higher track modulus.
• Higher track modulus results in reduced rolling resistance.
• Reduced rolling resistance allows railroads to improve their fuel efficiency.
• Up to a 7% reduction in rolling resistance provides a 1.2% to 4.5% reduction in fuel consumption.
OUR COMMITMENT TO SUSTAINABILITY
• Minimize the use of natural gas to heat production beds through increased utilization of ambient conditions. Investigate the use of biofuels in manufacturing.
• Conserve lighting needs through the use of high efficiency lighting to illuminate facilities.
• Minimize contaminants in waste water by increased use of filter presses.
• Minimize hazardous waste by controlling the use of toxic chemicals during manufacturing and investigate the use of other alternative chemicals.
• Reduce electrical demand by installing high efficiency motors.
• Establish a “Go Green” committee to focus on developing and implementing new sustainability initiatives.
All components of CXT Concrete Ties are recyclable.
10
lbfoster.com
CXT® Concrete Ties BenefitsEASE OF INSTALLATION
CXT concrete ties, using any fastening system with a pre-set gauge, can be installed at rates of up to 1,200 ties per day.
GREATER EFFICIENCY
Fewer concrete ties per track mile are required versus timber or other types of ties.
GREATER LIFE EXPECTANCY
CXT concrete ties outlast other types of ties.
REDUCED MAINTENANCE
A stiffer foundation for the track system reduces required lining and surfacing maintenance and provides accurate track gauge.
GREATER FUEL ECONOMY
Less friction and stiffer track structure allow rolling stock to move with less resistance and decreases fuel consumption.
ENVIRONMENTALLY SAFE
CXT concrete ties contain no hazardous chemicals to harm the environment.
EXCELLENT GAUGE HOLDING
Our elastic fastening system increases resistance to longitudinal rail movement developed by thermal stress and traffic loads.
SAFETY
Limited lateral and longitudinal movement of rail reduces derailments and minimizes derailment damage.
®
lbfoster.com