D-48
1760.932.347.23.518
101.
6
ø4
ø18.
3
16
ø18.
3
65.4 17318
ø4101.
6(63
.5)
16
Analog modelDigital model
RangeRange
L
D
Depth MicrometerSERIES 329, 129 — Interchangeable Rod Type
FEATURES• ø4mm interchangeable rods, with lapped
measuring end, provide a wide measuring range in 25mm increments.
• Ratchet stop provides constant force.• Measuring rod lock.• SPC output (Series 329).
Technical DataAccuracy: ±3µm/±.00015” for micrometer head feed (excluding quantizing error for digital models) ±(2+L/75)µm for interchangeable rod, L = Max. measuring length (mm) ±[.0001+.00005 (R/3)]” R = Max. measuring length (inch) Fraction rounded upResolution*: 0.001mm or .00005"/0.001mm (.0001”/0.001mm: 329-351-10)Graduation**: 0.01mm or .001”Flatness of reference face: 1.3µm (.00005”) for 63.5mm (2.5”) width base, 2µm (.0001”) for 101.6mm (4”) width baseFlatness of measuring rod face: 0.3µmParallelism between reference face and measuring rod face: (4+L/50)µm, L = Max. measuring length (mm) [.00016+.00004 (R/2)]” ,R = Max. measuring length (inch) Fraction rounded upMeasuring rod diameter: ø4mmDisplay*: LCDBattery*: SR44 (1 pc.), 938882Battery life*: Approx. 1.2 years under normal use*Digital models **Analog models
Functions of Digital Model2-point Preset, Zero-setting, Data hold, Automatic power ON/OFF, Data output, Preset inch/mm conversion (inch/mm models) Function lockAlarm: Low voltage, Counting value composition error
Optional Accessories for Digital Model05CZA662: SPC cable with data switch (1m)05CZA663: SPC cable with data switch (2m)02AZD790B: SPC cable for U-WAVE w/ data switch (160mm)
SPECIFICATIONSMetric
Range Order No. Base No. of rods0 - 150mm 329-250-10 101.6 x 16mm 60 - 300mm 329-251-10 101.6 x 16mm 12
Inch/Metric
Range Order No. Base No. of rods0 - 6” 329-350-10 4” x .63” 60 - 12” 329-351-10 4” x .63” 12
Metric
Range Order No. Base No. of rods0 - 25mm 129-154 63.5 x 16mm0 - 25mm 129-155 101.6 x 16mm0 - 50mm 129-109 63.5 x 16mm 20 - 50mm 129-113 101.6 x 16mm 20 - 75mm 129-110 63.5 x 16mm 30 - 75mm 129-114 101.6 x 16mm 30 - 100mm 129-111 63.5 x 16mm 40 - 100mm 129-115 101.6 x 16mm 40 - 150mm 129-112 63.5 x 16mm 60 - 150mm 129-116 101.6 x 16mm 60 - 300mm 129-152 63.5 x 16mm 120 - 300mm 129-153 101.6 x 16mm 12
Inch
Range Order No. Base No. of rods0 - 2” 129-129 4” x .63” 20 - 3” 129-126 2.5” x .63” 30 - 3” 129-130 4” x .63” 30 - 4” 129-127 2.5” x .63” 40 - 4” 129-131 4” x .63” 40 - 6” 129-128 2.5” x .63” 60 - 6” 129-132 4” x .63” 60 - 12” 129-149 2.5” x .63” 120 - 12” 129-150 4” x .63” 12
DIMENSIONSUnit: mm
329-250-10
129-110
Range 0 - 25mm 25 - 50mm 50 - 75mm 75 - 100mm 100 - 125mm 125 - 150mm 150 - 175mm 175 - 200mm 200 - 225mm 225 - 250mm 250 - 275mm 275 - 300mm
For digital model
Order No. 983501 983503 983505 983507 983509 983511 983525 983527 983529 983531 983533 983535
L 104mm 129mm 154mm 179mm 204mm 229mm 254mm 279mm 304mm 329mm 354mm 379mm
For analog model
Order No. 983505 983507 983509 983511 983525 983527 983529 983531 983533 983535 981781 981782
L 154mm 179mm 204mm 229mm 254mm 279mm 304mm 329mm 354mm 379mm 404mm 429mm
Interchangeable rod (Optional Accessories)
Range 0 - 1” 1 - 2” 2 - 3” 3 - 4” 4 - 5” 5 - 6” 6 - 7” 7 - 8” 8 - 9” 9 - 10” 10 - 11” 11 - 12”
For digital model
Order No. 983502 983504 983506 983508 983510 983512 983526 983528 983530 983532 983534 983536
L 104.3mm 129.7mm 155.1mm 180.5mm 205.9mm 231.3mm 256.7mm 282.1mm 307.5mm 332.9mm 358.3mm 383.7mm
For analog model
Order No. 983506 983508 983510 983512 983526 983528 983530 983532 983534 983536 981783 981784
L 155.1mm 180.5mm 205.9mm 231.3mm 256.7mm 282.1mm 307.5mm 332.9mm 358.3mm 383.7mm 409.1mm 434.5mm
Digital model Digital model
D-49
515-571
515-570
300 27
5 250 22
5 200 17
5 150 12
5 100 75 50 25
9292
3459
150 12
5 100 75
50 259
16
72
180
D
Depth MicrometerSERIES 128
Depth Micro CheckerSERIES 515
FEATURES• ø4mm measuring spindle.• Measuring spindle lock.
• Carbide-tipped measuring spindle model is available.
• Ratchet stop provides constant force.
Technical DataAccuracy: ±3µm (±.00015”) for micrometer head feed Graduation: 0.01mm or .001”Flatness of reference face: 1.3µm (.00005”) for 63.5mm (2.5”) width base, 2µm (.00008”) for 101.6mm (4”) width baseFlatness of measuring rod face: 0.3µm
SPECIFICATIONSMetric
Range Order No. Base0 - 25mm 128-101 63.5 x 16mm0 - 25mm 128-103* 63.5 x 16mm0 - 25mm 128-102 101.6 x 16mm0 - 25mm 128-104* 101.6 x 16mm
*with carbide-tipped measuring spindle
Inch
Range Order No. Base0 - 1” 128-105 2.5” x .63”0 - 1” 128-106 4” x .63”
FEATURES• The Depth Micro Checker is designed to
check and help set the range-end points of a depth micrometer.
Inch
Range Order No. Reference checking lengths available0 - 6” 515-575 1”, 2”, 3”, 4”, 5”, 6”
SPECIFICATIONSMetric
Range Order No. Reference checking lengths available0 - 150mm 515-570 25, 50, 75, 100, 125, 150mm0 - 300mm 515-571 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300mm
Technical DataBlock pitch accuracy: ±(1+L/150)µm,
L = Length to check (mm)Anvil block accuracy: ±0.5µm
(Refer to page VIII for details.)
DIMENSIONSUnit: mm
515-570
128-101 128-102
515-571
D-50
Up to 300mm range models( ): Coolant Proof models
Over 300mmrange models
73.5
L
100
2-ø5
5
107
2070 16
33 (41.
2) 250
4-ø9
65820
(27.
5)65
6527
.5
13
100
5
70
(20)
7
L
(86.7)
2 – ø5
(Refer to page VIII for details.)
D
ABSOLUTE Digimatic Depth GageSERIES 571
Technical DataAccuracy: ±0.02mm (≤200mm), ±0.03mm (≤300mm) ±0.05mm (≤600mm), ±0.06mm (≤750mm), ±0.07mm (≤1000mm) (excluding quantizing error)Resolution: 0.01mm or .0005"/0.01mmRepeatability: 0.01mmDisplay: LCDScale type: ABSOLUTE electrostatic (electromagnetic)* type linear encoderMax. response speed: UnlimitedBattery: SR44 (1 pc.), 938882Battery life: Approx. 20,000 hours [3 years (1 year: 300mm / 12” models)]* under normal use Dust/Water protection level: IP67**Coolant Proof models
FunctionsOrigin-set, Zero-setting, Automatic power on/off, Data output, inch/mm conversion (inch/mm models)Alarm: Low voltage, Counting value composition error
Optional Accessories959143: Data hold unit959149: SPC cable with data switch (1m)959150: SPC cable with data switch (2m)02AZD790C: SPC cable for U-WAVE w/ data switch (160mm)05CZA624: SPC cable with data switch (1m)*05CZA625: SPC cable with data switch (2m)*02AZD790A: SPC cable for U-WAVE w/ data switch (160mm)*––––––: Extension base (see page D-55.)*For Coolant Proof models
FEATURES• The ABSOLUTE Digimatic Depth Gage
keeps track of the origin point (once set) for the entire life of the battery.
• Base and measuring faces are hardened and micro-lapped.
• Optional wider extension bases are available. (up to 450mm range models)
• SPC data output.
SPECIFICATIONSMetric
Range Order No. Base (W x T)0 - 150mm 571-201-20 / 571-251-10* 100 x 6mm0 - 200mm 571-202-20 / 571-252-10* 100 x 6mm0 - 300mm 571-203-20 / 571-253-10* 100 x 6 (6.3)mm0 - 450mm 571-204-10 250 x 10mm0 - 600mm 571-205-10 250 x 10mm0 - 750mm 571-206-10 250 x 10mm0 - 1000mm 571-207-10 250 x 10mm
*IP67 Coolant Proof model
Inch/Metric
Range Order No. Base (W x T)0 - 6” 571-211-20 / 571-261-10* 3.93” x .23”0 - 8” 571-212-20 / 571-262-10* 3.93” x .23”0 - 12” 571-213-10 / 571-263-10* 3.93” x .23”0 - 18” 571-214-10 9.8” x .39”0 - 24” 571-215-10 9.8” x .39”0 - 30” 571-216-10 9.8” x .39”0 - 40” 571-217-10 9.8” x .39”
*IP67 Coolant Proof model
DIMENSIONSUnit: mm
Range L Base thickness0 - 150mm 237 60 - 200mm 287 60 - 300mm 403 (404) 6 (6.3)0 - 450mm 635 100 - 600mm 785 100 - 750mm 935 100 - 1000mm 1200 10
( ): Coolant Proof models
571-201-20
571-251-10
Measurement data output function is available with a water-resistant SPC cable.
(Refer to page VIII for details.)
571-253-10571-263-10
0047021102
D-51
107
7020
L
Up to 300mm range models
Over 300mm range models
100
4
70 16
34.5
2-ø5
11
8
6527
.565
6527
.5
30
110
L
2513
ø9
250
20
D
Vernier Depth GageSERIES 527
Technical DataAccuracy: Refer to the list of specifications. Graduation: 0.05mm, 0.02mm or .001”
Optional Accessories––––––: Extension base (see page D-55.)
FEATURES• Base and measuring faces are hardened
and micro-lapped.• Made of hardened stainless steel.• Optional wider extension bases are
available. (up to 450mm range models)
SPECIFICATIONSMetric
Range Order No. Vernier reading Accuracy Base (W x T) Remarks0 - 150mm 527-201 0.05mm ±0.05mm 100 x 6.5mm —0 - 150mm 527-121 0.02mm ±0.03mm 100 x 6.5mm —0 - 150mm 527-101 0.02mm ±0.03mm 100 x 6.5mm with fine adjustment0 - 200mm 527-202 0.05mm ±0.05mm 100 x 6.5mm —0 - 200mm 527-122 0.02mm ±0.03mm 100 x 6.5mm —0 - 200mm 527-102 0.02mm ±0.03mm 100 x 6.5mm with fine adjustment0 - 300mm 527-203 0.05mm ±0.08mm 100 x 6.5mm —0 - 300mm 527-123 0.02mm ±0.04mm 100 x 6.5mm —0 - 300mm 527-103 0.02mm ±0.04mm 100 x 6.5mm with fine adjustment0 - 600mm 527-204 0.05mm ±0.10mm 250 x 10mm —0 - 600mm 527-104 0.02mm ±0.05mm 250 x 10mm with fine adjustment0 - 1000mm 527-205 0.05mm ±0.15mm 250 x 10mm —0 - 1000mm 527-105 0.02mm ±0.07mm 250 x 10mm with fine adjustment
Inch
Range Order No. Vernier reading Accuracy Base (W x T) Remarks0 - 6” 527-111 .001” ±.001” 3.93” x .25” with fine adjustment0 - 8” 527-112 .001” ±.001” 3.93” x .25” with fine adjustment0 - 12” 527-113 .001” ±.0015” 9.8” x .39” with fine adjustment0 - 24” 527-114 .001” ±.002” 9.8” x .39” with fine adjustment0 - 40” 527-115 .001” ±.003” 9.8” x .39” with fine adjustment
DIMENSIONSUnit: mm
Range L0 - 150mm 2600 - 200mm 3100 - 300mm 4100 - 600mm 8000 - 1000mm 1200
527-201
527-101
Fine adjustment
D-52
L2
L1
L1= Reading on depth vernier
L1= Reading on hook vernier
L1= Reading on hook vernier — Reading on depth vernier
L3
21
10
9.5
L
2-ø5
11
10
7
26100
10
70
16
2-ø5 L
(57.5)
(41.
3)
D
Metric
Range: L1 (L2 and L3) Order No. Vernier reading Accuracy10 - 150mm (0 - 150mm) 527-411 0.02mm ±0.03mm10 - 200mm (0 - 200mm) 527-412 0.02mm ±0.03mm10 - 300mm (0 - 300mm) 527-413 0.02mm ±0.04mm
Depth GageSERIES 527, 571 — Hook End Type
FEATURES• The end of the main scale is hook-
shaped to allow depth and thickness measurements of a projected portion or lip in a hole, in addition to standard depth measurement.
• Fine-adjustment models are available.• Optional wider extension bases are
available.• SPC output (Series 571).
Metric
Range: L1 (L2 and L3) Order No. Vernier reading Accuracy10 - 150mm (0 - 150mm) 527-401 0.05mm ±0.05mm10 - 200mm (0 - 200mm) 527-402 0.05mm ±0.05mm10 - 300mm (0 - 300mm) 527-403 0.05mm ±0.08mm
DIMENSIONSUnit: mm
Range L0 - 150mm 2600 - 200mm 3100 - 300mm 410
Range L0 - 150mm 2470 - 200mm 297
527-401
571-254-10
SPECIFICATIONSMetric
Range: L1 (L2 and L3) Order No. Resolution Accuracy10 - 160mm (0 - 150mm) 571-254-10 0.01mm ±0.03mm10 - 210mm (0 - 200mm) 571-255-10 0.01mm ±0.03mm
Inch/Metric
Range: L1 (L2 and L3) Order No. Resolution Accuracy.4” - 6.4” (0 - 6”) 571-264-10 .0005” / 0.01mm ±0.03mm.4” - 8.4” (0 - 8”) 571-265-10 .0005” / 0.01mm ±0.03mm
Digital model
Digital model
(Refer to page VIII for details.)
Technical DataAccuracy: Refer to the list of specifications. (excluding quantizing error for digital models)Resolution*: 0.01mm or .0005"/0.01mmGraduation**: 0.05mm or 0.02mmRepeatability*: 0.01mmDisplay*: LCDScale type*: ABSOLUTE electromagnetic linear encoderMax. response speed*: UnlimitedBattery*: SR44 (1 pc.), 938882Battery life*: Approx. 3 years under normal use Dust/Water protection level*: IP67*Digital models **Analog models
Functions of Digital ModelOrigin-set, Zero-setting, Automatic power on/off, Data output, inch/mm conversion (inch/mm models)Alarm: Low voltage, Counting value composition error
Optional Accessories05CZA624: SPC cable with data switch (1m)*05CZA625: SPC cable with data switch (2m)*02AZD790A: SPC cable for U-WAVE w/ data switch (160mm)*––––––: Extension base (see page D-55.)*For digital models
(Refer to the VIII for details.)
with fine adjustment
0047021102
D-53
Extension base
Attach it to the depthgage base on a surface plate
Washer
Depth gage base
Mounting screw
Attaching the extension base
107
100 70
70 20
L
2-ø5
4 11
34.5
16
L
b a
177
a ba
R5 R5
n-M4×P=0.7No. 8-32UNC
D
Extension BasesOptional Accessories for Depth Gage
Dial Depth GageSERIES 527 — with Fine Adjustment
FEATURES• Easy-to-read dial.• Made of hardened stainless steel.
• Base and measuring faces are hardened and micro-lapped.
• Optional wider extension bases are available.
Technical DataAccuracy: Refer to the list of specifications. Dial reading: 0.05mm or .001”Base size: 100 x 6.5mm (W x T)
Optional Accessory––––––: Extension base
FEATURES• Attaches to the base (reference face) plate
of a depth gage to extend its span.• These extension bases cannot be attached
to 0 - 600mm, 0 - 1000mm, 0-24” and 0-40” range models.
SPECIFICATIONSMetric
Size L Order No. Dimensions a, b n180mm 900370 70mm, 55mm 2260mm 900371 35mm, 60mm 5320mm 900372 70mm, 55mm 4
Inch
Size L Order No. Dimensions a, b n7” 900367 2.76”, 2.17” 210” 900368 1.38”, 2.36” 512” 900369 2.76”, 2.17” 4
DIMENSIONSUnit: mm
Range L0 - 150mm 2600 - 200mm 3100 - 300mm 410
527-301-50
DIMENSIONSUnit: mm
900372
Order No. L a b n900370 180 70 55 2900371 260 35 60 5900372 320 70 55 4
Extension base
Inch
Range Order No. Dial reading Accuracy0 - 6” 527-311-50 .001” ±.001”0 - 8” 527-312-50 .001” ±.001”0 - 12” 527-313-50 .001” ±.0015”
SPECIFICATIONSMetric
Range Order No. Dial reading Accuracy0 - 150mm 527-301-50 0.05mm ±0.05mm0 - 200mm 527-302-50 0.05mm ±0.05mm0 - 300mm 527-303-50 0.05mm ±0.08mm
D-54
D
ABSOLUTE Digimatic/Dial Depth GageSERIES 547, 7
FEATURES• ABSOLUTE Digimatic Depth Gage keeps
track of the origin point (once set) for the entire life of the battery (Series 547).
• Wide probing range is available with the supplied extension rod.
• Bottom surface of the base is hardened, ground and lapped for highest degree of flatness.
• Designed with a back plunger type dial indicator for upward-facing reading. (7231, 7237, 7238)
• SPC data output (Series 547).
Technical Data of Digimatic ModelAccuracy: Refer to the list of specifications.
(excluding quantizing error for digital models)Resolution:
0.01mm type 0.01mm 0.001mm type 0.001mm/0.001mm .0005”/0.01mm type .0005”/0.01mm .00005”/0.001mm type .0005”/.0001”/.00005”/ 0.01mm/0.001mm
Flatness of base face: 5µm or 2µmContact point: Carbide-tipped ball point or needleMeasuring force: 1.5NDisplay: LCDScale type: ABSOLUTE electrostatic linear encoderMax. response speed: UnlimitedBattery: SR44 (1 pc.), 938882Battery life: Approx. 7,000 hours under normal use
Technical Data of Dial ModelAccuracy: Refer to the list of specifications.Dial reading: 0.01mm or .001”Flatness of base face: 5µm or 2µmContact point: Carbide-tipped ball point
(needle point: 7210, 7222)Measuring force: 1.4N (2.5N: 7213, 7214, 7217S, 7218S)
Functions of Digital ModelOrigin-set/Preset, Zeroset, GO/±NG judgment, Counting direction switching, Power ON/OFF, Simplified calculation, Function lock, Data hold, Data output, inch/mm conversion (inch/mm models)Alarm: Low voltage, Counting value composition error,
Over-flow error, Tolerance limit setting error
Optional Accessories for Digital Model905338: SPC cable (1m)905409: SPC cable (2m)02AZD790F: SPC cable for U-WAVE (160mm)
SPECIFICATIONSMetric
Range Order No. Stroke Accuracy Extension rod Base (W x T, flatness)0 - 200mm 547-211 12.7mm ±20µm 5 pcs. (10, 20, 30, 30, 100mm) 63.5 x 16mm, 5µm0 - 200mm 547-212 12.7mm ±20µm 5 pcs. (10, 20, 30, 30, 100mm) 101.6 x 16mm, 5µm0 - 200mm 547-251 12.7mm ±5µm 5 pcs. (10, 20, 30, 30, 100mm) 63.5 x 16mm, 2µm0 - 200mm 547-252 12.7mm ±5µm 5 pcs. (10, 20, 30, 30, 100mm) 101.6 x 16mm, 2µm
Inch/Metric
Range Order No. Stroke Accuracy Extension rod Base (W x T, flatness)0 - 8” 547-217S .5” ±.001” 4 pcs. (.5”, 1”, 2”, 4”) 2.5” x .63”, .0002”0 - 8” 547-218S .5” ±.001” 4 pcs. (.5”, 1”, 2”, 4”) 4” x .63”, .0002”0 - 8” 547-257S .5” ±.0002” 4 pcs. (.5”, 1”, 2”, 4”) 2.5” x .63”, .00008”0 - 8” 547-258S .5” ±.0002” 4 pcs. (.5”, 1”, 2”, 4”) 4” x .63”, .00008”
Metric
Range Order No. Stroke Accuracy Extension rod Base (W x T, flatness)0 - 10mm 7210* 10mm ±15µm — 40 x 16mm, 5µm0 - 200mm 7211 10mm ±15µm 5 pcs. (10, 20, 30, 30, 100mm) 63.5 x 16mm, 5µm0 - 200mm 7212 10mm ±15µm 5 pcs. (10, 20, 30, 30, 100mm) 101.6 x 16mm, 5µm0 - 210mm 7213 30mm ±30µm 3 pcs. (30, 60, 90mm) 63.5 x 16mm, 5µm0 - 210mm 7214 30mm ±30µm 3 pcs. (30, 60, 90mm) 101.6 x 16mm, 5µm0 - 200mm 7220 10mm ±15µm 5 pcs. (10, 20, 30, 30, 100mm) 100 x 18mm, 5µm0 - 200mm 7221 10mm ±15µm 5 pcs. (10, 20, 30, 30, 100mm) 150 x 18mm, 5µm0 - 10mm 7222* 10mm ±15µm — ø16mm, 5µm0 - 10mm 7223 10mm ±15µm — ø25mm, 5µm0 - 10mm 7224 10mm ±15µm — ø40mm, 5µm0 - 200mm 7231 5mm ±15µm 5 pcs. (10, 20, 30, 30, 100mm) 63.5 x 16mm, 5µm
*with needle probe
Inch
Range Order No. Stroke Accuracy Extension rod Base (W x T, flatness)0 - 8” 7217S 1” ±.002” 3 pcs. (1”, 2”, 4”) 2.5” x .63”, .0002”0 - 8” 7218S 1” ±.002” 3 pcs. (1”, 2”, 4”) 4” x .63”, .0002”0 - 8” 7237 .2” ±.002” 4 pcs. (.5”, 1”, 2”, 4”) 2.5” x .63”, .0002”0 - 8” 7238 .2” ±.002” 4 pcs. (.5”, 1”, 2”, 4”) 4” x .63”, .0002”
.0005”/0.01mm graduation .00005”/0.001mm/ graduation
0.01mm graduation 0.001mm graduation
(Refer to page VIII for details.)
7211
7214
72227224
7231547-211
Digital Type
Digital Type
Dial Type
Dial Type
D-55
7210 7222
7220
7221
7231, 7237 A= 63.5mm7238 A= 101.6mm
7213, 7217S A= 63.5mm7214, 7218S A= 101.6mm
7223 A= ø25mm7224 A= ø40mm
7211 A= 63.5mm7212 A= 101.6mm
M2.5x0.45
25
(11)
ø16
ø5A
14
(11)
(35)
(65)
(100
)
(65)
(10)
(10)
(114
)
(65)
(104
)
ø5
(10)
A
17
ø16
12
35.5
ø15.4
12
65
114
35.5ø16
100
ø5
5025
ø16
ø11
(18)
(35.
7)
(10)
(100
)
(65)
(10)
(100
)
(65)
(30)
(104
)(6
5)
(35.
7)
(18)
ø11
ø16
25 75
ø5
150
ø16
17
A
(5)
(35)
(11)
(64)
ø39
1717
17
17
22
SR1.5
SR 1.5
SR 0.2
SR 0.2
SR 1.5
SR 1.5
SR 1.5
ø40
ø57
ø57
ø57
ø57ø57
ø8
ø6
ø8
ø8
ø5 ø3ø5
ø8
ø8
ø6 ø6.5
ø8
ø6.5ø6ø5
ø8
ø57
(35)
SR 1.5
547-211, 547-251, 547-217S, 547-257S A= 63.5mm547-212, 547-252, 547-218S, 547-258S A= 101.6mm
547-211, 547-212, 547-251, 547-252 B= 12mm547-217S, 547-218S, 547-257S, 547-258S B= 12.9mm( )
835
.5
(10)
A
17 SR1.5
ø57
ø8
ø5
ø16
ø5
(B)
17
(35)
(105
)
(67)
(11)
A
SR1.5
ø6
ø59
D
DIMENSIONSUnit: mm
D-56
2960
113
571-100MOT-10 700-104
83
164
4.3
ø1.5
ø3
13
25
10
87.2
(60) 16
(3.5
)
ø30.8
ø3
D
DIMENSIONSUnit: mm
Tire Tread Depth GageSERIES 571, 700
FEATURES• ABSOLUTE Digimatic Tread Depth Gage
keeps track of the origin point (once set) for the entire life of the battery (Series 571).
• Specially designed to measure tire tread depth.
• Plastic construction for lightweight use (Series 700).
• With SPC data output (Series 571).
Technical DataAccuracy: Refer to the list of specifications.
(excluding quantizing errorResolution: 0.01mm or .0005"/0.01mm (571 Series)
0.1mm or .001”/0.1mm (700 Series)Display: LCDBattery: SR44 (1 pc.), 938882Battery life: Approx. 2 years under normal use
(approx. 2000 hours: Series 571)
FunctionsOrigin-set*, Zero-setting, Data output* Power ON/OFF, inch/mm conversion (inch/mm models)Alarm: Low voltage, Counting value composition error* Series 571
Optional Accessories for Series 571959143: Data hold unit959149: SPC cable with data switch (1m)959150: SPC cable with data switch (2m)02AZD790C: SPC cable for U-WAVE w/ data switch (160mm)
SPECIFICATIONSMetric
Range Order No. Accuracy0 - 25mm 571-100MOT-10 ±0.02mm0 - 25mm 700-104 ±0.2mm
Inch/Metric
Range Order No. Accuracy0 - 1” 571-200MOT-10 ±.0005”0 - 1” 700-105 ±.008”
(Refer to page VIII for details.)
700-104
b
d
c
e
a
Depth Base AttachmentOptional Accessory for Calipers
FEATURES• For 100mm, 150mm, 200mm, 300mm, 4”,
6”, 8” and 12” vernier and dial calipers which have a depth measuring bar.
• Finely ground base surface and secure locking clamp.
SPECIFICATIONSMetric
Size Order No. Applicable measuring range of caliper75mm 050083-10 100mm, 15mm, 200mm, 4”, 6” and 8”100mm 050084-10 100mm, 15mm, 200mm, 4”, 6” and 8”125mm 050085-10 300mm and 12”
Size a b c d e75mm 25 75 24.5 9 16100mm 25 100 24.5 9 16125mm 30 125 28.5 11.5 20
f: Base thickness
050084-10
DIMENSIONS
Unit: mm
Depth baseattachment