1
Design ProcessOur unique process is designed to quickly
create unique travel experiences that
generate exceptional profit margins and
high returns on capital. We add value at
every step of the way, giving you every
assurance you’re investing in the highest
quality, longest lasting glamping products
available today.
2
Our project delivery process
Identify project scope - High level consultation brief
Here we ask a range of questions including: Overall project objectives, number of accommodation units required, expected room rate, auxiliary buildings required, level of service, environment and logistical considerations and more.
Eco Structures to prove recommendations based on Brief
Here, we’ll draw on our global expertise to add invaluable insights that shape better outcomes. These recommendations will be drawn from the results of the high level brief.
Project Estimate
Once you have decided on the units required, we’ll provide a detailed project estimate, and construction schedule.
High level master planning (design)
Inclusions: Architectural drawings, detailed floor plans of accommodation and auxiliary buildings, site layout and more.
Site specific design
If required, we can assist you with landscaping concepts and interior design. FF&E and more.
Approval required from Client
Approval Required from Client
3
Identify project scope - High level consultation brief
Here we ask you a series of questions about your project vision, site location and requirements.
Some design constraint questions include;
• Development objectives: Overall project objective, land size, room requirements, other key amenities, expected
opening date.
• Financial objectives: Overall budget, planned room rates, expected occupancy
• Logistical considerations: Climate, terrain, soil, approvals, power
• Accommodation requirements: Total number of units, room sizes, special requirements and level of luxury
• Servicing requirements: Off-grid, power, water, solar
We also ask you to send through a range of photographs of the existing site. For example:
4
Design Requirements
Here you identify your project vision and design requirements.
After receiving this information we can provide an estimated cost per unit.
Concept design from client.
Elevation:
5
Floor Plans
We design suitable floor plans to match your concept vision and requirements.
SD4
INDOOR LIVING
W1
SD6
W1
INDOOR DINING
OUTDOOR DINING
BAR / DELI
OUTDOOR LIVING
RIM FLOR POOL
CLOAKROOM
SD6
SD4
SD4
D5
SD4
SUNSET FIRE PIT
DAY BED &POOL LOUNGE
FIRE PLACE& CHIMNEY
3500
8300
4500
6300
1000
7075 1000 1000
2000
2075
2500
6300
4500
6925
2000
SD4
SD4
SD4
SD4
7000
SCALE @ A3
PROJECT NO.
REVISION
DATE
DRAWING NO.
DRAWING
DRAWN
1. THIS DRAWING IS COPYRIGHT PROTECTED & REMAINS THE PROPERTY OF OPENHOUSE DESIGN (ABN 74 148 215 070) & ECO STRUCTURES AUSTRALIA (ABN 76 112 623 284) & SHALL NOT BE USED FOR ANY OTHER PURPOSE THAN ORIGINALLY INTENDED.
2. READ FIGURED DIMENSIONS IN PREFERENCE TO SCALE ALL DIMENSIONS IN mm U.O.N.3. BUILDER TO CHECK AND CONFIRM ALL MEASUREMENTS, LEVELS & DETAILS PRIOR TO THE COMMENCEMENT OF ANY WORK OR
FINANCIAL COMMITMENT. BUILDER TO CHECK AND CONFIRM MEASUREMENTS OF EXISTING BUILDING.4. THIS DRAWING TO BE READ IN CONJUNCTION WITH ALL BUILDING DESIGN DRAWINGS, ARCHITECTURAL NATSPEC SPECIFICATION, ALL
CONSULTANTS DRAWINGS AND SPECIFICATIONS & MANUFACTURERS SPECIFICATION. 5. ALL WORKMANSHIP & MATERIALS TO BE IN ACCORDANCE WITH THE MOST CURRENT BUILDING REGULATIONS, S.A.A. CODES &
AUSTRALIA STANDARDS.6. CONCEPTS SHOWN ARE SUBJECT TO RELEVANT AUTHORITY APPROVALS.7. FURNITURE, FIXTURE & LANDSCAPING FOR ILLUSTRATIVE PURPOSES ONLY.8. 3D IMAGES FOR ILLUSTRATIVE PURPOSES ONLY.
CLIENT:
PROJECT:
ADDRESS:
DRAWN FOR:
1 : 100
C
01‐May‐18 1:07:56 PM
4.0002
SK12PLAN
SKETCH DESIGN
WH
PROPOSED MUTENDELE MAIN LODGE
ZAMBIA
ECO STRUCTURES AUSTRALIA
REVISION SCHEDULEREV. DATE DESCRIPTIONA 20.03.18 FOR REVIEWB 24.04.18 OVERALL DESIGN REVISEDC 01.05.18 GENERAL REVISION
1 : 100FLOOR PLAN
DOOR SCHEDULE
Model Width Height CountSD4 2710 2435 8SD6 4065 2435 2
WINDOW SCHEDULE
Model Width Height CountW1 1350 2435 2
6
3D Drawings and Models
We can engage in 3D depending on the level of detail required.
This exercise can cost between $2,000 - $4,000.
7
Final Product
8
GAPP ARCHITECTS & URBAN DESIGNERS 150 Longmarket Street Cape Town. 8001 South Africa
19 November 2019
To whom it may concern:
REFERENCE LETTER FOR ECO STRUCTURES
In 2017, GAPP Architects were appointed as the designers of a new tented camp in Zambia. After assessing
the work of a few tent specialists around the world, Eco Structures were appointed, based on their quick
turnaround of the designs, their experience working in remote locations, their willing cooperation and the fact
they had the capability to deliver the structure as well as the tent envelope. Throughout the project they
were quick to react and professional in advice and execution of the work.
The design process was relatively smooth. GAPP Architects prepared conceptual layouts and 3D views that
demonstrated the proposed design intent, which Eco Structures then interpreted and, with their specialist
expertise, translated into construction drawings. Through extensive discussion and a rigorous redlining process,
we were able to ensure the Eco Structures design complied with our design intent. Much of the time we
were guided by Eco Structures as to what was possible and what was not. Where specific details were
required to be incorporated by us, these were forwarded to Eco Structures for inclusion in the design.
A full-scale mock-up was built by Eco Structures for our review. It was an essential part of the process and
we were very grateful for Karl Plunkett’s willingness to produce this. Throughout the process GAPP worked
interactively with the competent Eco Structures team and despite the distance between us, the camp
was successfully delivered - and the Clients love it.
Kind Regards
SALLY TSILIYIANNIS DIRECTOR / GAPP ARCHITECTS & URBAN DESIGNE
GAPP Architects & Urban Designers (Pty) Ltd | www.gapp.net