SPECIFICATIONS:TECHNICAL
APPLICATION:
RESISTANCE:
ALL-FIRE LEVEL:
NO-FIRE LEVEL:
STATIC SENSITIVITY:
BASE CHARGE:
PRIMARY EXPLOSIVE:
TEMPERATURE RATING:
IMPORTANT NOTES:
QUANTITY PER BOX:
NET EXPLOSIVE WEIGHT:
NET ITEM WEIGHT:
TOTAL PACKAGE WEIGHT:
BOX DIMENSIONS:
SHELF LIFE:
PACKAGE TYPE:
DETONATOR PACKAGING:
EXPLOSIVES:
ELECTRICAL SPECIFICATIONS:
RATINGS:
Owen Oil Tools & Paci�c Scienti�c
Cobalt based CLCP (lead free, non-primary energetic material) initiating detonator used in wireline operations to initiate non-exposed gun systems with a 99.99% initiation reliability @ 95% con�dence level.
Owen Interrupter is used for armed gun transport. Compatible detonatingcords and interrupter speci�cations are listed in the manual (MAN-DET-RF). Do not use PETN cord with interrupter!
Detonator Part Number:
Crimp Sleeve Part Number:
D.O.T. EX Number:
Shipping Class:
CE Number:
UN Number:
2-300750-1
DET-0010-074 (sold separately)
EX2014010681
1.4S
0080.EXP.14.0036
UN0456400°F (200°C) for 1 hour300°F (150°C) for 100 hoursNote: Duration limits due to det cord limits
0.800 MΩ - 1.100 MΩ
300 volts (DC)
55 volts (DC)
MIL-DTL-23659F
5.12 grains (CLCP)
None
10
3.3 grams
90 grams
2.87 lbs
12 in. X 9 in. X 6 in.
5 years from DOM (in original packaging)
4G �berboard box
DET-0010-074-DS (R00)
Note: Detonator should be electrically connected with red wire to hot lead and blue wire to ground.
This detonator with the crimp sleeve accessory (P/N DET-0010-074)is designed for use in non-exposed gun systems to initiate detonatingcord (see MAN-DET-RF for compatible cords). Simply slide the detonating cord into the crimp sleeve until it is �ush with the �uidhole and then crimp into place (see �gure above). This detonator is NOT made for 100 gr round detonating cord. This detonator is �uiddisabled (no soak time required when used with crimp sleeve) and ONLYinterruptible with Owen Oil Tools’ Interrupter (INT-3050-125I).
Crimp Sleeve with InterrupterRF-Safe Green Det™
Interrupter Part Number: INT-3050-125I (sold separately)