PRODUCT CATALOG
BETTER PARTS BETTER PROFITS
DURMA800 FORM911 (367-4911) | DURMAUSA.COM
HD-F/L SERIES LASERS
DURMA
STANDARD EQUIPMENT � Siemens 840D CNC Controller � Laser source (Resonator) � High pressure cutting option (25 Bar) � Central lubrication � Tropical Level Cooling unit � Scrap collector � Automatic pallet changer (manual on Smart Series) � Filter � Special laser cutting options � Sharp corner overheat protection (Speed-Power modulation) � Fast follow property of the head for high precision � Simple user interface parameter page (Power-speed-pressure combination) � Sheet identification and detection system (Ref. Point) � Two Cutting Heads: 5’’, 7,5’’ � Exchangeable Lens Holder System for Different Focal lengths (1,5’’ lens) � Under Table Small Part & Scrap Conveyor � Dust Collection Filtration
OPTIONAL EQUIPMENT � 3 & 4 kw IPG Fiber Resonators � Transverse Mounted Scrap Conveyor � Automation � Siemens Linear Motion System � CadCam Software
CAPACITIES � 5’ x 10’ � 6’6” x 13’ � 6’6” x 20’ � 8’ x 40’ � Larger sizes upon request � 2, 3 & 4 kw
HD 3015 SMART SERIES � 5’ x 10’ � 1 kw or 2 kw IPG Fiber � Manual Pallet Exchange
HD-F/L SERIES LASERS SPECIFICATIONS
DURMA
SIEMENS RACK & PINION MOTION SYSTEM
SIEMENS LINEAR MOTION SYSTEM (OPTIONAL)
SIEMENS 840D SERIES CONTROL
IPG FIBER RESONATOR
Dynamics Unit Rack & Pinion Linear Rack & Pinion Linear Rack & Pinion Linear
X Axis ipm 3374 6947 3374 6947 3374 6947Y Axis ipm 3970 6947 3970 6947 3970 6947Synchronous (X+Y) ipm 5200 9945 5200 9945 5200 9945Acceleration (starting) 39"/s^2 2G 3G 2G 3G 2G 3GPositional Accuracy in ± 0.002 ± 0.002 ± 0.002 ± 0.002 ± 0.002 ± 0.002Repeatability in ± 0.002 ± 0.001 ± 0.002 ± 0.001 ± 0.002 ± 0.001
X Axis in 120 120 157.5 157.5 240 240Y Axis in 59 59 78.7 78.7 80 80Z Axis in 3.1 3.1 3.1 3.1 3.1 3.1Max Sheet Size in 120x60 120x60 157.5x78.7 157.5x78.7 236.2x78.7 236.2x78.7Max Sheet Weight lb 2756 2756 3307 3307 5291 5291
Type
Working Area inMachine Width inMachine Height inTotal Length in
16578.7590.5409.4 488.2
512x256 630x256
Precitec
1.5" Lens (Kartridge system)5", 7.5" (Optional 10")
Precitec
Dimensions
Type
5", 7.5" (Optional 10")Focal LengthsLaser Cutting Lengths
433x236145.778.7
16578.7
1.5" Lens (Kartridge system)
Precitec
1.5" Lens (Kartridge system)5", 7.5" (Optional 10")
included
Filter
HD-F/L 3015 HD-F/L4020 HD-F/L6020
Cutting Axes
Cutting Head
HD Series
COMPACT AUTOMATION
INTELLIGENT AUTO FOCUS CUTTING HEAD
AUTOMATIC SHUTTLE TABLE EFFICIENT BEAM PATH
FLYING OPTICS CONCEPT
HD/L SERIES LASERS
DURMA
STANDARD EQUIPMENT � Siemens 840D CNC Controller � CadCam Software � Laser source (Resonator) � High pressure cutting option (25 Bar) � Central lubrication � Tropical Level Cooling unit � Scrap collector � Shuttle table (Automatic pallet changer) � Filter � Special laser cutting options � Sharp corner overheat protection (Speed-Power modulation) � Fast follow property of the head for high precision � Simple user interface parameter page (Power-speed-pressure combination) � Sheet identification and detection system (Ref. Point) � Two Cutting Heads: 5’’, 7,5’’ � Exchangeable Lens Holder System for Different Focal lengths (1,5’’ lens) � Under Table Small Part & Scrap Conveyor
OPTIONAL EQUIPMENT � Dust Collection Filtration � 3-4-5-7 kw PRC Resonator � Transverse Mounted Scrap Conveyor � Automation � Siemens Linear Motion System
CAPACITIES � 5’ x 10’ � 6’6” x 13’ � 6’6” x 20’ � 3, 4, 5 & 6 kw
SIEMENS RACK & PINION MOTION SYSTEM
SIEMENS LINEAR MOTION SYSTEM (OPTIONAL)
SIEMENS 840D SERIES CONTROL
HD/L SERIES LASERS SPECIFICATIONS
DURMA
Dynamics Unit Rack & Pinion Linear Rack & Pinion Linear Rack & Pinion Linear Rack & Pinion Linear
X Axis ft/min 3573 6947 3573 6947 3573 6947 3573 6947Y Axis ft/min 3970 6947 3970 6947 3970 6947 3970 6947Synchronous (X+Y) ft/min 5200 9925 5200 9925 5200 9925 5200 9925
Acceleration (starting) 39"/s^2 2G 3G 2G 3G 2G 3G 2G 3GPositional Accuracy in ± 0.002 ± 0.002 ± 0.002 ± 0.002 ± 0.002 ± 0.002 ± 0.002 ± 0.002Repeatability in ± 0.002 ± 0.001 ± 0.002 ± 0.001 ± 0.002 ± 0.001 ± 0.002 ± 0.001
X Axis in 120 120 157.5 157.5 240 240 480 480Y Axis in 59 59 78.7 78.7 80 80 120 120Z Axis in 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1Max Sheet Size in 118x59 118x59 157.5x78.7 157.5x78.7 236.2x78.7 236.2x78.7 480x120 480x120Max Sheet Weight lb 2756 2756 3307 3307 5291 5291 7900 7900
Working Area inMachine Width inMachine Height inTotal Length in
Ral 7040 Ral7040 Ral 7040 Ral 7040 Ral 7040 Ral 7040 Ral 7040 Ral 7040
Durma Special Durma Special Durma Special Durma Special Durma Special Durma Special Durma Special Durma Special
Durma Special
590.5
Durma Special
Colors (Body)
Ral 7040
Durma SpecialColors (Body)Ral 7040
Durma Special
Ral 7040Ral 7040
409.4 488.2Colors (Protection Sheets)
Colors (Protection Sheets)
2xPCI; 1xCF Card15" TFT Color Monitor
Precitec
830
1.5" Lens (Kartridge system)5", 7.5" (Optional 10")
870x298
78.7
Laser Cutting HeadExpansion SlotsPort
512x256 630x25616578.7
Type
5", 7.5" (Optional 10")Focal LengthsLaser Cutting Lengths
Dimensions433x236
145.7 20778.7
16578.7
Precitec
1.5" Lens (Kartridge system)5", 7.5" (Optional 10")
Precitec
1.5" Lens (Kartridge system)
included
Precitec
1.5" Lens (Kartridge system)5", 7.5" (Optional 10")
FilterType
HD/L 3015 HD/L4020 HD/L6020
Control Unit
Win XP pro, 2 GHz Intel Processor, 40GB HD
HD/L 12030
Cutting Axes
6MB User RAM Memory840D, NCU 573.5
6MB User RAM Memory
Win XP pro, 2 GHz Intel Processor, 40GB HD
HD Series
2xPCI; 1xCF Card15" TFT Color Monitor
MemoryCNC
PC:PCU50.3Win XP pro, 2 GHz Intel
Processor, 40GB HD
2xPCI; 1xCF Card15" TFT Color Monitor
840D, NCU 573.5
15" TFT Color Monitor
840D, NCU 573.56MB User RAM Memory
Win XP pro, 2 GHz Intel Processor, 40GB HD
2xPCI; 1xCF Card
6MB User RAM Memory840D, NCU 573.5
FRAME MOUNTED RESONATOR COMPACT AUTOMATION
INTELLIGENT AUTO FOCUS CUTTING HEAD
AUTOMATIC SHUTTLE TABLE EFFICIENT BEAM PATH
FLYING OPTICS CONCEPT
PL & PL-C SERIES PLASMA
DURMA
STANDARD EQUIPMENT � Independent Zoned & Partitioned
Table � Hypertherm Automatic Gas Console � Siemens AC Digital Servo Motors � Rack & Pinion/Linear Drive System � + - .004 Positioning Accuracy � 1,389 IPM Positioning � Laser Locator (auto plate position
locator)
� Remote Diagnostics via Ethernet Connection
� HPR 130xd � Break Away Torch Head � Stress Relieved Frame � Marking System � AC Digital Servomotors � Speed Control Device � Plasma Ignition Console
PL CAPACITIES � 5’ - 20’ widths � 10’ - 125’ lengths � Custom sizes upon request
PL-C CAPACITIES � 5’ and 6’ Widths � 10’ – 13’ – 20’ Lengths
PL SERIES PLASMA PRODUCT HIGHLIGHTS
DURMA
HYPERTHERM POWER SOURCE
ZONED & PARTITIONED TABLE EXHAUST
CADCAM NESTING SOFTWARE
SIX STATION MACHINING HEAD
SIEMENS 840D SERIES CONTROL
BEVELING HEAD
PLASMA AUTOMATION & LARGE FORMAT CUTTING
TP SERIES TURRET PUNCH
DURMA
STANDARD EQUIPMENT � Siemens 840Dsl CNC Control � Up to Six Indexable Multi-Tool
Stations � Remote Diagnostic via
Ethernet � Network via Ethernet � Automatic Clamp Positioning � Automatic Tool Lubrication
� Alignment Tool � USB Port � Auto Sheet X Axis
Repositioning � Oil Cooler � Brush Table � Work Chute
OPTIONAL EQUIPMENT � Load/Unload Systems � Indexable Multi-Tool � Tool Holders � CAD/CAM Nesting Software � Wheel Programming Software � Parts Chute
CAPACITIES � 49” x 78” x 22/33 Tons � 49” x 100” x 22/33 Tons � 60” x 120” x 22/33 Tons
STRESS-RELIEVED BRIDGE FRAME CONSTRUCTION
SIEMENS AC SERVODIRECT DRIVE MOTION SYSTEM
SIEMENS 840 DSI CONTROL
TP SERIES TURRET PUNCH SPECIFICATIONS
DURMA
TP Series Unit TP6 TP9 TP63 TP93 TP123 TPL63 TPL93Maximum Tonnage U.S. ton 33 22 33 22 22 33 22X Axis Movement inch 78 + R 78 + R 98 + R 98 + R 96 + R 118 + R 118 + R
Y Axis Movement with Single Tool inch 49.2 49.2 49.2 49.2 49.2 59.1 59.1Automatic Repositioning Range * inch 393 393 393 393 393 393 393Y Axis Speed ipm 2.7 2.8 2.8 2.8 3.1 2.7 2.8X Axis Speed ipm 3 3.5 3 3.5 3.8 3 3.5Lateral Speed Y + X ipm 3.5 4.5 3.5 4.5 4.9 3.5 4.5Max Hit Rate (1mm pitch, 1mm thickness) hpm 600 900 600 900 1200 600 900Max Hit Rate (25mm pitch, 1mm thickness) hpm 300 350 250 300 400 300 300Max Hit Rate: Marking hpm 850 1200 900 1200 1800 850 1200Main Cylinder Stroke inch 1.6 1.6 1.6 1.6 1.6 1.6 1.6Maximum Punching Stroke inch 1 1 1 1 1 1 1Max Cutting Thickness: Mild Steel mm 6 6 6 6 6 6 6Max Cutting Thickness: Stainless Steel mm 6 6 6 6 6 6 6Positioning Accuracy inch ±.004 ±.004 ±.004 ±.004 ±.004 ±.004 ±.004Repeatable Accuracy inch ±.002 ±.002 ±.002 ±.002 ±.002 ±.002 ±.002Turret Rotation Speed rpm 30 30 22 22 22 22 22Auto Index Rotational Speed rpm 150 150 150 150 150 150 150Max Weight of Sheet lbs 220 265 265 265 265 441 441
Height inch 98.4 98.4 98.4 98.4 90.9 90.9 90.9Width (without light barrier) inch 166.0 166.0 1170 / 211 170 / 211 169.0 248.0 248.0Width (with light barrier) inch 244.0 244.0 247 / 286 247 / 286 247.0 327.0 327.0Length (without light barrier) inch 205.0 236.0 227.0 227.0 189.0 262.0 262.0Length (with light barrier) inch 244.0 276.0 268.0 268.0 229.0 302.0 302.0Table Height inch 37.0 37.0 37.0 37.0 37.0 37.0 37.0Approx. Weight lbs 27558 27558 27558 27558 30424 42990 42990Motor kw 11 7.5 11 7.5 15 11 7.5Oil Tank lt 180 200 180 180 180 200 200No. of Clamps 2 2 3 3 3 4 4
Machine Dimensions
* Special table must be added to the machine, and the light barriers must be located at the correct position. Max weight 220 pounds.
Specifications are approximate and subject to change without notice.
AUTOMATIC SHEET CLAMP POSITION
AUTOMATION
PROGRAMMABLE WORK CHUTE(OPTIONAL)
MANUAL NESTING
INDEXABLE MULTI-TOOLS(EXCEPT TP 6 & 9)
AD-R SERIES PRESS BRAKES
DURMA
STANDARD EQUIPMENT � Y1, Y2 Servo Ram Positioning � X Axis Back Gauge with Fingertip Lateral
Adjustment � Delem DA 52 Angle Programming Control � Quickset Front Sheet Supports via
Linear Guide � Universal Wedge Style Punch Clamp for
American or Euro Style Punches
OPTIONAL EQUIPMENT � R Axis Back Gauge � Manual Table Crowning � Automatic Table Crowning � Delem DA 56 Graphical Control � Quick Release Punch Clamping � Akas Ram Mounted Laser
Operational Guarding � Additional Finger Blocks
� 39” Back Gauge � Hydraulic Tool Clamping � Tooling
DA 52 CONTROL 2D GRAPHICAL CONTROL (OPTIONAL) SHIMLESS BENDING (OPTIONAL)
AD-R SERIES PRESS BRAKES SPECIFICATIONS
DURMA
QUICKSET FRONT SHEET SUPPORTSUNIVERSAL BOX FORMING STYLE PUNCH CLAMPS
R-AXIS PROGRAMMABLE BACK GAUGE HEIGHT
12 20 20 25 30 30 30 37 14 30 37 43 30 40 43 40 43 60 60 60R Series Model 40 40 66 100 100 135 175 175 175 220 220 220 320 320 320 400 400 220 320 400
Bending force U.S. ton 44 44 66 110 110 150 195 195 195 245 245 245 350 350 350 440 440 245 350 440Bending length inch 49 80 80 100 120 120 120 145 168 120 145 168 120 159 168 159 168 240 240 240Between columns inch 41 67 67 86 102 102 102 122 146``` 102 122 146 102 141 146 134 146 200 200 200Daylight inch 17 17 21 21 21 21 21 21 21 21 21 21 25 25 25 25 25 21 25 25Stroke inch 6 6 10 10 10 10 10 10 10 10 10 10 10 14 14 14 14 10 14 14Throat depth inch 14 14 16 16 16 16 16 16 16 16 16 16 16 16 16 20 20 16 16 20X Axis Speed ipm 590 590 590 590 590 590 590 590 590 5900 590 590 590 590 590 590 590 590 590 590X Axis Travel inch 19.7 19.7 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 29.5 29.5 29.5 29.5 29.5Weight (approx) pounds 7,040 7716 12897 19070 20393 22597 24802 28600 29842 27007 31592 32518 38030 45746 47643 58974 59873 45393 62281 78815
12 20 20 25 30 30 30 37 14 30 37 43 30 40 43 40 43 60 60 60R Series Model 40 40 66 100 100 135 175 175 175 220 220 220 320 320 320 400 400 220 320 400
Bending force U.S. ton 44 44 66 110 110 150 195 195 195 245 245 245 350 350 350 440 440 245 350 440Bending length inch 49 80 80 100 120 120 120 145 168 120 145 168 120 159 168 159 168 240 240 240Between columns inch 41 67 67 86 102 102 102 122 146``` 102 122 146 102 141 146 134 146 200 200 200Daylight inch 17 17 21 21 21 21 21 21 21 21 21 21 25 25 25 25 25 21 25 25Stroke inch 6 6 10 10 10 10 10 10 10 10 10 10 10 14 14 14 14 10 14 14Throat depth inch 14 14 16 16 16 16 16 16 16 16 16 16 16 16 16 20 20 16 16 20X Axis Speed ipm 590 590 590 590 590 590 590 590 590 5900 590 590 590 590 590 590 590 590 590 590X Axis Travel inch 19.7 19.7 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 29.5 29.5 29.5 29.5 29.5Weight (approx) pounds 7,040 7716 12897 19070 20393 22597 24802 28600 29842 27007 31592 32518 38030 45746 47643 58974 59873 45393 62281 78815
12 20 20 25 30 30 30 37 14 30 37 43 30 40 43 40 43 60 60 60R Series Model 40 40 66 100 100 135 175 175 175 220 220 220 320 320 320 400 400 220 320 400
Bending force U.S. ton 44 44 66 110 110 150 195 195 195 245 245 245 350 350 350 440 440 245 350 440Bending length inch 49 80 80 100 120 120 120 145 168 120 145 168 120 159 168 159 168 240 240 240Between columns inch 41 67 67 86 102 102 102 122 146``` 102 122 146 102 141 146 134 146 200 200 200Daylight inch 17 17 21 21 21 21 21 21 21 21 21 21 25 25 25 25 25 21 25 25Stroke inch 6 6 10 10 10 10 10 10 10 10 10 10 10 14 14 14 14 10 14 14Throat depth inch 14 14 16 16 16 16 16 16 16 16 16 16 16 16 16 20 20 16 16 20X Axis Speed ipm 590 590 590 590 590 590 590 590 590 5900 590 590 590 590 590 590 590 590 590 590X Axis Travel inch 19.7 19.7 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 25.6 29.5 29.5 29.5 29.5 29.5Weight (approx) pounds 7,040 7716 12897 19070 20393 22597 24802 28600 29842 27007 31592 32518 38030 45746 47643 58974 59873 45393 62281 78815
AD-S SERIES PRESS BRAKES
DURMA
STANDARD EQUIPMENT � Large Stroke - Daylight - Throat � Y1, Y2 Ram Positioning � Delem DA 66 Graphic Control � Euro/American Style Punch Clamp � X/R Back Gauge
� Quickset Sliding Front Sheet Support � Automatic Table Crowning � Rear Work Light � Side and Rear Safety Doors
OPTIONAL EQUIPMENT � Up to Six Axis Back Gauge � Laser Style Angle Measuring System � CNC Controlled Sheet Followers � CNC Controlled Die Shuttle Systems � 3D Controller � 2D & 3D Programming Software � Operational Laser Guarding
15” TOUCHSCREEN CONTROL UP TO SIX AXIS BACK GAUGINGHYDRAULIC TOOL CLAMPING
AD-S SERIES PRESS BRAKES SPECIFICATIONS
DURMA
SHIMLESS BENDING LARGE STROKE & DAYLIGHTCNC SHEET FOLLOWERS
12 20 20 25 30 30 30 30 30 37 37 43 40 40 43 40 43 40S Series Model 40 40 66 100 100 135 175 220 320 175 220 175 175 220 220 320 320 400Tons US Tons 44 44 66 110 110 150 195 245 350 195 245 195 195 245 245 350 350 440
Bend Length inch 49 80 81 100 120 120 120 120 120 145 145 168 159 159 168 159 168 159
Between Columns inch 41 67 67 86 102 102 102 102 102 122 122 146 141 141 146 141 146 141
Open Ht(bed to ram) inch 15 15 21 21 21 21 21 21 21 21 21 21 21 21 21 25 25 25
Stroke (Std/Opt) inch 14 14 10 10 10 10 10 10 10 10 10 16 10 10 16 14 16 14
Throat Depth inch 14 14 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 20
X Axis Speed ipm 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181
X Axis Travel inch 20 20 26 26 26 26 26 26 26 26 26 25 26 26 30 26 50 30
R Axis Speed ipm 827 827 827 827 827 827 827 827 827 827 827 827 827 827 827 827 708 708
R-Axis Travel inch 6 6 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
Approx Weight lbs 7040 7716 13448 19621 20944 23149 25353 27558 25353 28660 31658 29842 28881 33069 32518 46297 47643 59524
12 20 20 25 30 30 30 30 30 37 37 43 40 40 43 40 43 40S Series Model 40 40 66 100 100 135 175 220 320 175 220 175 175 220 220 320 320 400Tons US Tons 44 44 66 110 110 150 195 245 350 195 245 195 195 245 245 350 350 440
Bend Length inch 49 80 81 100 120 120 120 120 120 145 145 168 159 159 168 159 168 159
Between Columns inch 41 67 67 86 102 102 102 102 102 122 122 146 141 141 146 141 146 141
Open Ht(bed to ram) inch 15 15 21 21 21 21 21 21 21 21 21 21 21 21 21 25 25 25
Stroke (Std/Opt) inch 14 14 10 10 10 10 10 10 10 10 10 16 10 10 16 14 16 14
Throat Depth inch 14 14 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 20
X Axis Speed ipm 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181
X Axis Travel inch 20 20 26 26 26 26 26 26 26 26 26 25 26 26 30 26 50 30
R Axis Speed ipm 827 827 827 827 827 827 827 827 827 827 827 827 827 827 827 827 708 708
R-Axis Travel inch 6 6 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
Approx Weight lbs 7040 7716 13448 19621 20944 23149 25353 27558 25353 28660 31658 29842 28881 33069 32518 46297 47643 59524
60 60 60 60 60 70 70 70 80 80 80 80 80S Series Model 220 320 400 600 800 800 1000 1250 800 1000 1250 1600 2000Tons US Tons 245 350 440 660 880 880 1100 1375 880 1100 1375 1760 2200
Bend Length inch 238 238 238 238 238 277 277 277 317 317 317 318 318
Between Columns inch 200 200 200 200 200 200 200 200 252 252 252 252 252
Open Ht. (bed to ram) inch 28 21 25 28 28 28 32 32 28 32 32 39 39
Stroke (Std/Opt) inch 14 10 14 14 16 16 20 24 14 16 16 24 24
Throat Depth inch 20 16 20 20 24 24 24 24 24 24 24 24 30
X Axis Speed ipm 1181 1181 827 827 827 827 708 708 708 708 708 708 708
X Axis Travel inch 30 30 30 30 30 30 39 39 30 39 39 39 49
R Axis Speed inch / sec 12 12 12 12 12 12 10 10 12 10 10 10 10
R-Axis Travel inch 10 10 10 10 10 10 10 10 10 10 10 10 10
Approx Weight lbs 89287 45944 79366 119050 158733 175268 210541 242509 187392 224872 297624 359354 548941
12 20 20 25 30 30 30 30 30 37 37 43 40 40 43 40 43 40S Series Model 40 40 66 100 100 135 175 220 320 175 220 175 175 220 220 320 320 400Tons US Tons 44 44 66 110 110 150 195 245 350 195 245 195 195 245 245 350 350 440
Bend Length inch 49 80 81 100 120 120 120 120 120 145 145 168 159 159 168 159 168 159
Between Columns inch 41 67 67 86 102 102 102 102 102 122 122 146 141 141 146 141 146 141
Open Ht(bed to ram) inch 15 15 21 21 21 21 21 21 21 21 21 21 21 21 21 25 25 25
Stroke (Std/Opt) inch 14 14 10 10 10 10 10 10 10 10 10 16 10 10 16 14 16 14
Throat Depth inch 14 14 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 20
X Axis Speed ipm 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181 1181
X Axis Travel inch 20 20 26 26 26 26 26 26 26 26 26 25 26 26 30 26 50 30
R Axis Speed ipm 827 827 827 827 827 827 827 827 827 827 827 827 827 827 827 827 708 708
R-Axis Travel inch 6 6 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
Approx Weight lbs 7040 7716 13448 19621 20944 23149 25353 27558 25353 28660 31658 29842 28881 33069 32518 46297 47643 59524
AD-H SERIES PRESS BRAKES
DURMA
STANDARD EQUIPMENT � Energy Savings
� 62% During Idle � 44% During Cycle
� Lower Per Part Cost � Silent Operation � Increased Ram Speeds � Better Accuracy � Smoother Ram Positioning
at High Speeds � Less Oil Requirement
OPTIONAL EQUIPMENT � Robotics � Up to Six Axis Back Gauge � Laser Style Angle Measuring System � CNC Controlled Sheet Followers � CNC Controlled Die Shuttle Systems � 3D Controller 2D & 3D Programming
Software � Operational Laser Guarding
CAPACITIES � 8’ & 10’ Lengths � 110 - 150 - 195 Tons
15” TOUCHSCREEN CONTROL UP TO SIX AXIS BACK GAUGINGELECTRO HYDRAULIC OPERATION
AD-H SERIES PRESS BRAKES SPECIFICATIONS
DURMA
SHIMLESS BENDING LARGE STROKE & DAYLIGHTCNC SHEET FOLLOWERS (OPTIONAL)
25 30 30 30Model 100 100 135 175
Tons US Tons 112 112 151 196Bend Length inch 100 120 120 120Between Columns inch 86 102 102 102Open Ht(bed to ram) inch 21 / 25 21 / 25 21 / 25 21 / 25
Stroke (Std/Opt) inch 10 / 14 10 / 14 10.4 10 / 14Throat Depth inch 16 16 16 16X Axis Speed ipm 1181 1181 1181 1181X Axis Travel inch 26 26 26 26R Axis Speed ipm 827 827 827 827R-Axis Travel inch 10 10 10 10Approx Weight lbs 19621 20944 23149 25353
Specifications Conventional Press Brakes
SvP Press Brakes
Motor Power (HP) 20 2 x 5Hydraulic Oil Capacity (gallons) 53 2 x 11Noise Level (dB(A)) 76 63Total Energy per Cycle (kWh) 0.034 0.019Standby Power (kw/hr) 1.85 0.7Rapid Approach Speed (ipm) 230 to 280 472Return Speed Beam (ipm) 210 250 425
ADSL LARGE FORMAT PRESS BRAKES
FEATURES � Unique Box Frame Construction (Dependent Tons, Stroke, Daylight & Gap) � Stress Relieved Frame � Large Gaps-Strokes-Daylight Openings � Special Reinforcements for Heavy Center Loads � Over a Small Area � Special Front and Back Feed Systems for the � Pole Manufacturing Industries � Automatic Table Crowning � Programmable V Openings � Tandem & Trio Systems � Automatic Blank Loading � Automatic Part Discharge
STANDARD FEATURES � Large Stroke-Daylight-Throat � Y1,Y2 Ram Positioning � Delem DA 66 Graphic Control � Euro/American Style Punch Clamp � X/R Back Gauge � Quickset Sliding Front Sheet Support � Automatic Table Crowning � Rear Work Light � Side and Rear Safety Doors
CAPACITIES � Lengths 13’ - 30’ + Tandem/Trio � 660 - 3,300 Tons
15” TOUCHSCREEN CONTROL
DURMA
CNC FEED & GAUGE SYSTEMS POLE OR PART DISCHARGE DEVICE
DURMA
DUMP TRUCK PRODUCTION
ADSL SERIES PRESS BRAKES SPECIFICATIONS
POLE MANUFACTURER ROAD BARRIER INDUSTRY
ADSL Large Format Press Brakes Series
60 60 60 60 60 70 70 70 80 80 80 80 80S Series Model 220 320 400 600 800 800 1000 1250 800 1000 1250 1600 2000Tons US Tons 245 350 440 660 880 880 1100 1375 880 1100 1375 1760 2200
Bend Length ( A ) inch 238 238 238 238 238 277 277 277 317 317 317 318 318
Between Columns ( B ) inch 200 200 200 200 200 200 200 200 252 252 252 252 252
Y Rapid Speed ipm 236 236 236 189 189 189 165 165 189 165 165 165 165
Y Working Speed ipm 24 24 19 17 17 17 14 14 17 14 16 14 14
Y Return Speed ipm 236 236 189 189 165 165 165 165 165 165 168 168 144
Open Ht. (bed to ram) ( D ) inch 28 21 25 28 28 28 32 32 28 32 32 39 39
Table Width ( G ) inch 4 6 12 12 16 16 16 16 16 16 20 20 28
Table Height ( F ) inch 39 43 48 39 32 32 32 35 32 32 35 35 37
Stroke (Std/Opt) ( C ) inch 14 10 14 14 16 16 20 24 14 16 16 24 24
Throat Depth ( E ) inch 20 16 20 20 24 24 24 24 24 24 24 24 30
Support Arms qty 4 4 4 4 4 4 4 4 4 4 4 4 4
B.G.Fingers qty 4 4 4 4 4 4 4 4 6 6 6 6 6
X Axis Speed ipm 1181 1181 827 827 827 827 708 708 708 708 708 708 708
X Axis Travel inch 30 30 30 30 30 30 39 39 30 39 39 39 49
R Axis Speed inch / sec 12 12 12 12 12 12 10 10 12 10 10 10 10
R-Axis Travel inch 10 10 10 10 10 10 10 10 10 10 10 10 10
Main Motor HP 30 30 50 60 75 75 75 100 75 75 100 120 150
Oil Capacity gal 132 66 132 132 198 198 264 330 198 264 330 330 528
Length ( L ) inch 222 295 295 299 317 343 347 347 386 394 394 398 413
Width ( W ) inch 128 70 83 104 126 126 128 128 126 128 128 138 171
Height ( H ) inch 151 128 146 152 167 167 232 252 167 232 252 276 319
Approx Weight lbs 89287 45944 79366 119050 158733 175268 210541 242509 187392 224872 297624 359354 548941
VS SERIES SHEARS
DURMA
STANDARD EQUIPMENT � User-Friendly CNC
Touchscreen Control � Flexibility for Thick/Thin,
Narrow/Wide Sheets � Automatic Swing-up Back
Gauge
� T-slotted Sheet Support Arms � Tabletop Ball Transfers � CNC Front Feeding � Support, Conveying &
Stacking Systems � Anti-Twist Device to Reduce
Strip Distortion
OPTIONAL EQUIPMENT � Return to sender � Automatic feeding � Sheet support systems � Conveyor systems
CAPACITIES � 1/4” - 1” � 10’ - 30’ Lengths
D-TOUCH 7 CONTROL REAR PNEUMATIC SHEET SUPPORTS REAR SIDE AUTOMATION
VS SERIES SHEARS SPECIFICATIONS
DURMA
3006 3010 3013 3016 3020 4006 4013 4016in 121 121 121 121 121 121 121 121
MS in 0.24 0.39 0.51 0.63 0.79 0.24 0.51 0.63SS in 0.16 0.31 0.39 0.51 0.63 0.16 0.39 0.39min 12 10 9 7 6 10 7 5max 20 20 17 12 12 20 13 9min 21 15 15 11 9 19 13 10max 33 27 27 18 17 31 25 17min 0°30' 0°30' 0°30' 0°30' 0°30' 0°30' 0°30' 0°30'max 2° 2° 2°30' 2°30' 2°30' 2° 2°30' 2°30'
16 16 17 14 14 20 20 17min ton 4.4 4.4 8.0 11 17.0 4.0 10.0 50.0max ton 22 22 40 55 83 20 48 100
min 1000 1000 1000 1000 1000 1000 1000 1000ips 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9hp 15 30 40 60 60 15 40 60gal 33 48 79 119 132 33 87 106in 13.8 13.8 13.8 13.8 13.8 13.8 13.8 13.8
High speed stroke / min
Cutting Angle
Number of holddowns
Throat depth
Holddown force
Back gauge courseBack gauge speedMotor powerOil capacity
VS Series
Cutting Capacity
Stroke per minute
Cutting Length
4020 6006 6013 6016 6020 6025 8010 10013in 121 239 239 239 239 240 319 398
MS in 0.79 0.24 0.51 0.63 0.79 1.00 0.39 0.51SS in 0.63 0.16 0.31 0.39 0.51 0.79 0.24 0.31min 4 6 5 4 3 3 3 3max 8 10 10 10 6 6 6 6min 8 - - - - - - -max 16 - - - - - - -min 0°30' 0°30' 0°30' 0°30' 0°30' 0°30' 0°30' 0°30'max 2°30' 2° 2°30' 2°30' 3°15' 3°25' 2° 2°12'
21 29 29 29 29 30 40 52min ton 50.0 10 29 29 48 150 40 60max ton 100 20 58 58 100 250 60 81
min 1000 1000 1000 1000 1000 1000 1000 1500ips 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9hp 60 30 50 60 60 74 40 60gal 132 53 106 145 185 198 145 172in 13.8 13.8 13.8 13.8 13.8 13.8 19.7 29.5
High speed stroke / min
Cutting Angle
Holddown force
Back gauge courseBack gauge speedMotor powerOil capacityThroat depth
VS Series
Cutting Capacity
Stroke per minute
Number of holddowns
Cutting Length
Specifications are approximate and subject to change without notice.
CNC CONTROLLED FRONT FEED SYSTEM
FLIP-UP FINGER GUARDS &TABLETOP TRANSFERS
LARGE GAP
SBT SERIES SHEARS
DURMA
STANDARD EQUIPMENT � Touch Screen Control � Programmable Back Gauge
Positions � Program Storage � Programmable Stroke Length � 39” High Speed Back Gauge � Swing Away or Up Back
Gauge Bar
� 60” Squaring Arm � T-Slotted Support Arms with
Disappearing Stops (2/10’ - 3/13’)
� Tabletop Ball Transfers � Quickset Blade Clearance
Setting
OPTIONAL EQUIPMENT � High Speed Package � Rear Pneumatic Sheet
Supports � Conveying & Stacking
Systems � Protractor � Longer Support & Squaring Arms
CAPACITIES � 1/4” to 3/4” � 10’ and 13’ Lengths
SBT SERIES SHEAR SPECIFICATIONS
DURMA
Model 3006 3010 3013 3016 3020 4006 4013Cutting Length (A) inch 122 122 122 122 122 161 161
MS inch .250 .375 .500 .625 .750 .250 .500SS inch .157 .250 .314 .375 .500 .157 .314
Throat Depth (D) inch 2 2 2 2 2 2 2Strokes - full length spm 17 15 15 11 7 13 9Strokes -full length (high-speed option) spm 26 21 20 15 8 25 19Cutting Angle degree 1°30' 1°30' 1°45' 2° 2° 1°30' 1°45'
Holddowns 16 16 16 14 14 20 18
Holddown Force ton 15 24 41 67 85 19 68
Back Gauge Range inch 39.4 39.4 39.4 39.4 39.4 39.4 39.4Back Gauge Power hp 1 1 1 1 1 1 1
Back Gauge Speed ipm 472 472 472 472 472 472 472Motor Power hp 20 30 40 50 60 20 40Oil Capacity U.S. gallon 52.8 52.8 87.2 108.3 118.9 52.8 87.2
Sheet Supports 2 2 2 2 2 3 3
Table Height (C) inch 34 34 34 33 35 34 33Table Width (B) inch 19.7 22.8 23.6 21.7 22.4 22.8 21.7Table Length (R) inch 138.4 138.4 139.8 140.9 144.5 177.6 178.0Length (L) inch 161.8 165.4 168.5 179.1 175.2 205.9 210.6Width (W1) inch 86.6 88.6 90.6 88.6 89.0 90.6 88.6Total Width (W) inch 145.7 141.7 141.7 150.6 133.9 141.7 151.6Height (H) inch 82.7 82.7 92.5 88.6 96.5 84.6 88.6
SBT Series
Cutting Capacity
Model 3006 3010 3013 3016 3020 4006 4013Cutting Length (A) inch 122 122 122 122 122 161 161
MS inch .250 .375 .500 .625 .750 .250 .500SS inch .157 .250 .314 .375 .500 .157 .314
Throat Depth (D) inch 2 2 2 2 2 2 2Strokes - full length spm 17 15 15 11 7 13 9Strokes -full length (high-speed option) spm 26 21 20 15 8 25 19Cutting Angle degree 1°30' 1°30' 1°45' 2° 2° 1°30' 1°45'
Holddowns 16 16 16 14 14 20 18
Holddown Force ton 15 24 41 67 85 19 68
Back Gauge Range inch 39.4 39.4 39.4 39.4 39.4 39.4 39.4Back Gauge Power hp 1 1 1 1 1 1 1
Back Gauge Speed ipm 472 472 472 472 472 472 472Motor Power hp 20 30 40 50 60 20 40Oil Capacity U.S. gallon 52.8 52.8 87.2 108.3 118.9 52.8 87.2
Sheet Supports 2 2 2 2 2 3 3
Table Height (C) inch 34 34 34 33 35 34 33Table Width (B) inch 19.7 22.8 23.6 21.7 22.4 22.8 21.7Table Length (R) inch 138.4 138.4 139.8 140.9 144.5 177.6 178.0Length (L) inch 161.8 165.4 168.5 179.1 175.2 205.9 210.6Width (W1) inch 86.6 88.6 90.6 88.6 89.0 90.6 88.6Total Width (W) inch 145.7 141.7 141.7 150.6 133.9 141.7 151.6Height (H) inch 82.7 82.7 92.5 88.6 96.5 84.6 88.6
SBT Series
Cutting Capacity
D-TOUCH 7 CONTROL REAR VIEW WITH SUPPORT SYSTEMFAST & ACCURATE PROGRAMMABLE BACK GAUGE
REAR PNEUMATIC SHEET SUPPORTS (OPTIONAL)
QUICKSET BLADE CLEARANCEFLIP-UP FINGER GUARD
MS SERIES MECHANICAL SHEARS
DURMA
STANDARD EQUIPMENT � DT7 Touchscreen Control (10 Gauge) � 40” Squaring Arm with T-Slotted and
Disappearing Stop � Two 40” Front Support Arms � 17” Rear Operated Manual Back Gauge
(11, 12 & 14 Gauge) � Solid Hold-down with Non-slip Rubber Pad � Portable Foot Control with Emergency
Stop Button � Tabletop Ball Transfers (10 Gauge) � 29.5” Programmable Back Gauge (10 Gauge)
OPTIONAL EQUIPMENT � DT7 Touchscreen Control (11, 12 & 14
Gauge) � Protractor for Angle Shearing � Rear Pneumatic Sheet Support System � Stroke Counter � Extended Squaring and Support Arms
(3004) � 29.5” Programmable Back Gauge (11, 12
& 14 Gauge)
CAPACITIES � 10 - 11 - 12 - 14 Gauges � 4 - 10’ Lengths
MS SERIES MECHANICAL SHEARS SPECIFICATIONS
DURMA
MS Series Unit 1303 2003 2525 2005 2504 3004
Cutting Capacity inch 0.12 0.12 0.10 0.16 0.16 0.16
Cutting length inch 53 81 100 81 100 122
Cutting angle 2°30' 2°12' 1°30' 1°30' 1°30' 1°30'Stroke per minute 35 35 35 42 42 42
Motor power kw 3 3 3 7.5 7.5 7.5Back gauge range ipm 22 22 22 30 30 30
Table width inch 16 16 16 18 18 18
Table height inch 33 33 33 32 32 32
Height inch 47 47 47 52 52 52
Width inch 53 53 53 91 91 91
Length inch 67 94 113 100 120 144
Approx. Weight pounds 2425 2866 3086 6173 7121 8223
D-TOUCH 7 CONTROL REAR PNEUMATIC SHEET SUPPORTSFAST & ACCURATE PROGRAMMABLE BACK GAUGE
TABLETOP BALL TRANSFERS REAR PNEUMATIC SHEET SUPPORTS PROTRACTOR (OPTIONAL)
MRB SERIES PLATE ROLLS
DURMA
STANDARD EQUIPMENT � Conical Bending � Top & Bottom Rolls Gear Driven � Motorized Back Roll � Pendant Control � SAE 1050 Steel Rolls � Induction Hardened Rolls � Stress Relieved Frame � Material Support (8’& 10’) � Brake for Precise Control
OPTIONAL EQUIPMENT � Digital Readouts � Remote Control � Motorized Bottom Roll � Ground Rolls � Roll Extension for Profiles
CAPACITIES � Bend Length 5-10’ � Bend Thickness 10 ga. – 1/4”
STANDARD EQUIPMENT � Conical Bending � Bottom & Back Rolls Man. Driven � Top & Bottom Rolls Gear DrivenChain � Portable Control � SAE 1050 Steel Rolls � Cast Iron Frame � Grooves on Bottom & Back Roll
OPTIONAL EQUIPMENT � Hardened Rolls � Ground Rolls
CAPACITIES � Bend Length 40” – 78” � Bend Thickness .040 – 11 Ga.
MRB-E SERIES
MRB SERIES PLATE ROLLS SPECIFICATIONS
DURMA
MRB-S Series 1506 2005 2006 2007 2503 2504 2506 2508 3004 3006Bending Length in 60.2 79.9 79.9 79.9 99.6 99.6 99.6 99.6 119.3 119.3Bending Capacity in 0.25 0.20 0.25 0.28 0.12 0.16 0.25 0.32 0.16 0.25Pre Bending in 0.16 0.16 0.20 0.25 0.08 0.12 0.16 0.25 0.08 0.16Top Roll Ø in 5.9 6.3 6.7 7.5 5.9 6.7 7.5 8.7 7.1 8.7Motor Power hp 5.5 5.5 5.5 5.5 5.5 5.5 7.5 7.5 5.5 7.5L x H x W in 122 x 44 x 40 142 x 44 x 40 142 x 44 x 40 148 x 47 x 45 161 x 44 x 40 161 x 44 x 40 167 x 47 x 45 167 x 47 x 45 181 x 44 x 40 187 x 47 x 45Weight lbs 4630 5071 5291 7496T 5952 5952 8267 9766 9370 10847
MRB-E Series 1001 1002 1003 1202 1225 1203 1525 2015 2002Bending Length in 40.6 40.6 40.6 50.4 50.4 50.4 60.2 79.9 79.9Bending Capacity in 0.04 0.08 0.12 0.08 0.10 0.12 0.10 0.06 0.08Pre Bending in 0.03 0.05 0.08 0.05 0.06 0.08 0.06 0.03 0.04Top Roll Ø in 2.2 3 3.5 3 3.5 3.7 3.7 3.5 3.7Motor Power kw 1.0 1.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0L x H x W in 69 x 43 x 33 69 x 45 x 33 69 x 45 x 33 79 x 45 x 33 79 x 45 x 33 79 x 45 x 33 89 x 45 x 33 108 x 45 x 33 108 x 45 x 33Weight lbs 617 849 970 1003 1168 1224 1389 1499 1576
MRB Series 1004 1005 1204 1205 1206 1503 1504 1505 2004Bending Length in 40.6 40.6 50.4 50.4 50.4 60.2 50.4 50.4 50.4Bending Capacity in 0.16 0.2 0.16 0.2 0.25 0.12 0.2 0.2 0.2Pre Bending in 0.12 0.16 0.12 0.14 0.16 0.08 0.14 0.14 0.14Top Roll Ø in 4.3 5.1 4.7 5.1 5.5 4.3 5.1 5.1 5.1Motor Power kw 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0L x H x W in 75 x 44 x 37 75 x 44 x 37 85 x 44 x 37 85 x 44 x 37 85 x 44 x 37 94 x 44 x 37 85 x 44 x 37 85 x 44 x 37 85 x 44 x 37Weight lbs 2635 2811 2965 3053 3208 3060 3053 3053 3053
MRB-E SERIES MRB-S SERIES
HRB4 SERIES PLATE ROLLS
DURMA
STANDARD EQUIPMENT � Control Unit with DROs � Conical Bending � Bearing Seated Rolls � Stress Relieved Frame
� Induction Hardened Rolls � PLC Synchronized Side Rolls � Hyd. Top Roll Opening � Pressure Adj. Bottom Rolls
CAPACITIES � Bend Length 5 - 20’ � Bend Thickness 1/4” - 6”
OPTIONAL EQUIPMENT � NC Control (far right) � Polished Rolls � Side Supports � Profile Bending Rolls � Welding at Machine
� Material Feed Table � CNC Control w/Color Graphics (right) � Oil Cooler � Vertical Support Crane � Changeable Top Roll (for smaller dia.) � Special Wind Tower Application
HRB4 SERIES PLATE ROLLS SPECIFICATIONS
DURMA
ødx1.5 ødx3 ødx5
HRB 4 SeriesBending Leight
Pre-Bending
CapacitiesBending
CapacitiesBending
CapacitiesTop Roll
Bottom Roll
Side Rolls
Max. Pass
Through Length Width HeightWorking Height Weight
Motor Power
Unit inch inch inch inch inch inch inch inch inch inch inch inch pound hp1504 61 0.12 0.16 0.20 5.5 5.1 5.1 0.5 120 35 45 35 5225 51505 61 0.16 0.20 0.24 5.9 5.5 5.1 0.5 120 35 45 34 5357 7.51507 61 0.20 0.28 0.31 6.7 5.9 5.5 0.5 120 35 45 34 5732 7.5
2003 81 0.08 0.12 0.16 5.5 5.1 5.1 0.5 139 35 45 35 6019 42004 81 0.12 0.16 0.20 5.9 5.5 5.1 0.5 139 35 45 34 6217 72006 81 0.16 0.24 0.28 6.7 5.9 5.5 0.6 139 35 45 34 6680 7.52008 81 0.24 0.31 0.39 7.9 7.5 6.7 1.2 151 46 46 33 10428 102010 81 0.31 0.39 0.47 8.3 7.5 7.1 1.2 151 46 46 33 10891 102013 81 0.39 0.51 0.59 9.1 8.3 7.5 1.2 151 46 46 32 11640 152016 81 0.51 0.63 0.71 10.6 9.8 8.7 2 168 65 63 45 21164 202020 81 0.63 0.79 0.87 11.8 10.6 8.7 2 168 65 63 45 22046 252025 81 0.79 0.98 1.10 13 11.8 9.4 2 168 65 63 44 23810 302030 81 0.98 1.18 1.30 14.2 13 10.6 2.4 178 81 81 59 34613 402035 81 1.18 1.38 1.50 15.7 14.6 11.4 2.6 178 81 81 59 37038 502040 81 1.38 1.57 1.73 16.9 15.7 12.6 2.8 178 81 81 58 39463 602050 81 1.57 1.97 2.17 18.1 18.1 14.6 3.5 203 91 100 74 63934 702065 81 1.97 2.56 2.76 19.3 19.3 15.4 3.9 207 91 102 73 66139 80
2506 100 0.16 0.24 0.28 7.9 7.5 6.7 1.2 170 46 46 33 11552 102508 100 0.24 0.31 0.39 8.3 7.5 7.1 1.2 170 46 46 33 12125 102510 100 0.31 0.39 0.47 9.1 8.3 7.5 1.2 170 46 46 32 13051 152513 100 0.39 0.51 0.59 10.6 9.8 8.7 2 187 65 63 45 23369 202516 100 0.51 0.63 0.71 11.8 10.6 8.7 2 187 65 63 45 24471 252520 100 0.63 0.79 0.87 13 11.8 9.4 2 187 65 63 44 26676 302525 100 0.79 0.98 1.10 14.2 13 10.6 2.4 197 81 81 59 38581 302530 100 0.98 1.18 1.30 15.7 14.6 11.4 2.6 197 81 81 59 41447 402535 100 1.18 1.38 1.50 16.9 15.7 12.6 2.8 197 81 81 58 44754 502540 100 1.38 1.57 1.73 18.1 18.1 14.6 3.5 222 91 100 74 68343 602550 100 1.57 1.97 2.17 19.3 19.3 14.6 3.9 226 91 102 73 77162 702565 * 100 1.97 2.56 2.76 19.7 19.7 16.1 3.9 230 93 104 72 85980 80
Specifications are approximate and subject to change without notice.
SPECIAL WIND TOWER APPLICATION CONICAL BENDINGSTRESS RELIEVED FRAME
HRB3 SERIES PLATE ROLLS
DURMA
CAPACITIES � Bend Length 8 - 13’ � Bend Thickness 1/4” - 1”
STANDARD EQUIPMENT � Control Unit with DROs � Conical Bending � Bearing Seated Rolls � Stress Relieved Frame � Induction Hardened Rolls
� PLC Synchronized Side Rolls � Hyd. Drop End w/Easy Remove � Pressure Adj. Bottom Rolls � Rectilinear Guides (machines with
rolls 17.72” or greater)
OPTIONAL EQUIPMENT � Variable Speed Control � Oil Cooler � Vertical Supports � Welding at Machine � Special Wind Tower Application
� Changeable Top Roll (for smaller dia.) � Polished Rolls � Side Supports � Profile Bending Rolls � Material Feed Table
CNC CONTROL NC CONTROL
HRB3 SERIES PLATE ROLLS SPECIFICATIONS
DURMASpecifications are approximate and subject to change without notice.
ødx1.5 ødx3 ødx5
HRB 3 SeriesBending Leight
Pre-Bending
CapacitiesBending
CapacitiesBending
Capacities Top Roll Side Rolls
Max. Pass
Through Length Width HeightWorking Height Weight
Motor Power
Unit inch inch inch inch inch inch inch inch inch inch inch pound hp
2006 81 0.157 0.236 0.276 7.3 6.5 2.8 152 51 45 32 5512 5.52010 81 0.315 0.394 0.472 8.3 7.5 3 151 46 46 33 8818 7.52013 81 0.394 0.512 0.591 9.1 7.9 3 151 46 46 32 10582 11
2508 100 0.236 0.315 0.394 8.3 7.5 3 170 46 46 33 9921 7.52513 100 0.394 0.512 0.591 10.6 9.8 3.9 187 65 63 45 14771 152520 100 0.630 0.787 0.866 13 11.4 3.9 187 65 63 44 22928 22
3006 122 0.157 0.236 0.276 8.3 7.5 3 192 46 46 33 11023 7.53010 122 0.315 0.394 0.472 10.6 9.8 3.9 209 65 63 45 16535 113013 122 0.394 0.512 0.591 11.8 10.6 3.9 209 65 63 45 19842 153016 122 0.512 0.63 0.709 13 11.4 3.9 209 65 63 44 26015 18.53020 122 0.63 0.787 0.866 14.2 13 4.9 219 81 81 59 27558 223025 122 0.787 0.984 1.102 15.7 13.8 4.9 219 81 81 59 37479 30
PLC CONTROL SYSTEM DURMA RECTILINEAR ROLLS STRESS RELIEVED FRAME
HB SERIES BANDSAWS
DURMA
STANDARD EQUIPMENT � Hydraulic Vice � Electronic Variable Cutting Speed Adjustment with Inverter � Bimetal Bandsaw and Cooling System � Blade Tensioning - Hydro Mechanical (HB-S) � Bearing and Carbide Tape Blade Housing � Cutting Height Adjustment � Motorized Roller Feeding (HB-S) � Bi-directional 45° Adjustable Angle Vice (HB-S) � Top Clamping - Mechanical � Length Adjustment - Electrical � Part Counter (HB-S) � Roller Table
OPTIONAL EQUIPMENT � Chip Brush � Motorized Chip Brush � Chip Conveyor � Blade Tensioning - Hydro Mechanical � Blade Tensioning - Hydraulic � Laser Marking System � NC Control System (HB-S) � Top Clamping - Hydraulic � Turn Table (HB-S) � Micro-spray Cooling System � Automatic Cutting Pressure Control � 47” Material Roller Table � 118” Motorized Roller Table (HB-S)
HB Series Bandsaws are available in two models: HB-S (Semi-Automatic) and HB-S (Automatic).
DCB SERIES BANDSAWS
DURMA
� Two-way 45° Angle Adjustable Clamp
� Hydraulic Vice � Electronic Variable Cutting Speed
Adjustment with Inverter
� Bimetal Bandsaw and Cooling System � Chip Brush � Blade Tensioning - Hydro Mechanical � Bearing and Carbide Tape Blade Housing � Cutting Height Adjustment
� Motorized Roller Feeding � Top Clamping - Mechanical � Length Adjustment - Electrical � Part Counter � 47” Roller Table
� One-Way 60° Adjustable Turn Table Base � Hydraulic Vice � Electronic Variable Cutting Speed
Adjustment with Inverter � Bimetal Bandsaw and Cooling System
� Blade Tensioning - Hydro Mechanical � Bearing and Carbide Tape Blade Housing � Cutting Height Adjustment � Motorized Roller Feeding � Top Clamping - Mechanical
� Length Adjustment - Electrical � Chip Brush � Part Counter � 47” Roller Table
� Hydraulic Vice � Synchronized Cutting Arm &
Clamp System � Bilateral 60° Angled Cut � Digital Readout of Turn Table � Motorized Turn Table
� Electronic Variable Cutting Speed Adjustment with Inverter
� Bimetal Bandsaw and Cooling System � Blade Tensioning - Hydro Mechanical � Bearing and Carbide Tape Blade Housing � Cutting Height Adjustment
� Motorized Roller Feeding � Top Clamping - Mechanical � Length Adjustment - Electrical � Chip Brush � Part Counter � 47” Roller Table
� Hydraulic Vice � Electronic Variable Cutting Speed
Adjustment with Inverter � Bimetal Bandsaw and Cooling System
� Blade Tensioning - Hydromechanical � Bearing and Carbide Tape Blade Housing � Cutting Height Adjustment � Motorized Roller Feeding � Top Clamping - Mechanical
� Length Adjustment - Electrical � Chip Brush � Part Counter � Roller Table - 47”
� Hydraulic Vice � Motorized Feeding Vice � One-way 60° Adjustable Cutting Angle � Electronic Variable Cutting Speed
Adjustment with Inverter
� Bimetal Bandsaw and Cutting System � Blade Tensioning - Hydro Mechanical � Bearing and Carbide Tape Blade Housing � Cutting Height Adjustment � Motorized Roller Feeding
� Top Clamping - Mechanical � Length Adjustment - Electrical � Chip Brush � Part Counter � Roller Table - 47”
DCB-S
DCB-M
DCB-DM
DCB-A
DCB-FA
IW SERIES IRONWORKERS
DURMA
STANDARD EQUIPMENT � Swing Away Stripper � Punching Station � Section Cutting � Angle Cutting � Flat Bar Shearing � Notching � Twist and Drop Punch Holder � Touch and Cut Back Stop � Angle Mitering & Flat Bar Station � Angle Station � Large Throat and Gauging Table � Channel Web Punching � Bending Attachment
IW SINGLE CYLINDERCAPACITIES � 40 - 45 Tons � Five Stations
IW DUAL CYLINDERCAPACITIES � 60 - 88 - 121 - 188 Tons � Five Stations
IW SERIES IRONWORKERS SPECIFICATIONS
DURMA
Triangular Notch (Thickness) Inch 0.19 0.19 0.25 0.25 0.25 0.25 0.25 0.25Triangular Notching Width Inch 3 3 3 3 5 5 5 5Triangulat Notching Depth Inch 3 3 3 3 5 5 5 5
Motorpower HP 4 4 8 8 15 15 15 15Oil Capacity Gallon 9 9 20 20 20 20 20 40Net Weight (Approx.) lb 1742 1830 2822 3009 5908 5908 8223 17666Machine Dimension (Approx.) Inch 62x57x56 62x57x61 66x68x70 82x70x80 82x70x80 92x70x80 104x70x89 127x43x90Packing Dimension (Approx.) mm 63x28x58 63x28x72 67x28x72 83x32x72 83x32x82 93x32x82 104x32x92 43
Optional Equipment
Technical Data
IW Series 45 45D 55 55DT 80 80DT 110DT 165 DTPunching Tons Inch 50 50 60 60 88 88 121 180Punch Capacity Inch 1 1 1 1 1 1 1 1Throat Depth Inch 6 6 9 20 11 20 24 24
Maximum Stroke Length Inch 0.75 0.75 0.375 0.375 0.5 0.5 0.125 0.5Strokes Per Minute Quat. 20 20 37 37 38 38 28 31Table Size Inch 17x 6 17 x 6 21 x 9 21x 20 21 x 11 21 x 20 21x 24 30 x 20Table Height Inch 40 40 42 43 47 47 49 59
Largest Hole Inch 4 4 6 6 6 6 6 6Single Vee Press Brake Inch 0 0 10 10 12 12 12 15Multi-Vee Press Brake Inch 0 0 19 19 19 23 23 33Pipe Notching Inch 0 0 2 2 2 2 2 2
Flat Bar (Max Thickness) Inch 8 8 8 8 12 12 15 16Flat Bar (Max Width) Inch 12 12 11 11 18 18 23 30Blade Length Inch 12 12 12 12 18 18 24 30Angle Flange Trim Inch 3 3 2 2 3 3 4 5Working Height Inch 39 39 35 35 40 40 42 39
At 90˚ Shearing Inch 3x3x5/16 3x3x5/16 4x4x3/8 4x4x3/8 5x5x1/2 5x5x1/2 6x6x1/2 8x8x3/4At 45˚ Miter Shearing Inch 2x2x1/4 3x3x1/4 3x3x1/4 3x3x1/4 3x3x1/4 3x3x1/4 3x3x1/4Working Height Inch 40 40 40 43 49 49 52 52
Round Bar Inch 1 1 1 1 1 1 2 2Square Bar Inch 1 1 1 1 1 1 2 2Working Height Inch 41 44 41 41 51 51 54 54
U- Profit Shear Inch 4 4 4 4 5 5 6 8T- Profit Shear Inch 1 1 2 2 2 2 2 3I- Profit Shear Inch 4 4 4 5 5 6 8
Material Thickness Inch 0.25 0.25 0.38 0.38 0.47 0.47 0.5 0.6Rectangular (Width) Inch 1 1 1 1 2 2 2 2Rectangular Notch (Depth) Inch 2 2 3 3 3 3 3 4Vee Notcher (Side Depth x Thickness) mm 1 1 1 1 2 2 2 2
Optional Equipment
Angle Shearing
Flat Shearing
Bar Shearing
Optional Equipment
Notching
FN & VN SERIES VARIABLE ANGLE NOTCHERS
DURMA
STANDARD EQUIPMENT � 30-140° Quickset Adjustment of Notch Angle (VN Series Only) � Two Protractor Gauges Material Holddowns (VN Series Only) � T-Slotted Table with Recessed Measuring Scales
� Hand & Foot Control � Slug Chute � Adjustable Back Stop for Side Shearing � Automatic Blade Clearance
Angle Adjustment Degrees 90 30-140 30-140Maximum Cutting Thickness inch .135 .135 .250Blade Length inch 7.9 x 7.9 7.9 x 7.9 7.9 x 7.9
Horsepower inch 5.5 5.5 5.5
DURMA AIMS FOR CONTINUOUS DEVELOPMENT
DURMA’s large investment in machining centers and production equipment, as well as its ISO-certified factories totaling 1,350,000 square feet and 1,000 employees in Bursa, Turkey, make one of the world’s largest, efficient and most contemporary facilities in the world.
In order to offer customer solutions and further develop patents, the Durma Research and Development center opened in 2010. Fifty engineers were added over the last two years.
Designed and engineered with modern technology, Durma products are equipped with high quality and proven readily available components.
Established in 1956, Durma has vast experience in building and supplying quality products. With over 60,000 machines delivered worldwide, Durma has earned a reputation as a supplier of innovative “value oriented” solutions.
Your partner today, tomorrow, and forever.
© ALL RIGHTS RESERVED VERSION 13.0206DURMA