, RDW Vehicle Technology Division
@)
THE NETHERLANDS(NED ERLAND)
cd:D-COMMUNICATION
Conceming (1):
-approval granted-approval extended
approval refusedapf'roval withdra'.vnproduetion definitely diseoR-t:im1ed
of a type of mechanical coupling device or component pursuant to Regulation number 55.
Approval number: E4-55R-010027 Extension number: 01
Approval mark:E4 55R-Ol 0027
1.
2.
3.
4.
5.
6.
7.
Trade name or mark of the device or
component
-: STEELPRESS
Manufacturer's name for the type ofdevice or component : ZSK-750
Manufacturer' s name and address : STEELPRESS Sp. z 0.0.u1.PowstancowWielkopolskich 48PL-62-031 Lubon - Poman
If applicable, name and address of themanufacturer's representative
Altemative supplier' s name or trademarks applied to the device orcomponent
Name and address of company or bodytaking responsibility for the conformityof production : STEELPRESS Sp. z 0.0.
u1.PowstancowWielkopolskich 48PL-62-031 Lubon - Poman
Submitted for approval on
..
P.O. Box 777
2700 AT ZoeterrneerThe Netherlands
Tel. + 31 (0)793458143Fax + 31 (0)79 345 8043www.rdw.nl
Vehicle Approval and Information
Coupling-component R55-01 v5.00 Page l oj3
Approval number: E4-55R-010027
8. Technical service responsible forcondueting approval tests
J/r
9. Brief description
Extension number: 01
: DEKRA Automobil GmbHAutomobil Test CenterSenftenberger StraBe30D-01998 Klettwitz
9.1. Type and class of device or component : Coupling head, Class B50-X
9.2. Characteristic values
9.2.1. P'
Altemative values:
I ~ I
U(tonnes)
De(kN)
S
(kg)
V
(kN)
9.3. For class A mechanical coupling devices or components, including towing brackets:
Vehicle manufacturer's maximumpermissible vehicle mass
Distribution of maximum permissiblevehicle mass between the axles
Vehicle manufacturer' s maximumpermissible towabIe trailer mass
Vehicle manufacturer' s maximumpermissible static mass on couplingball
Maximum mass of the vehicle, withbodywork, in running order, includingcoolant, oils, fuel, tools and sparewheel (if supplied) but not includingdriver
Loading condition under which thetow ball height of a mechanicalcoupling device fitted to category MIvehicles is to be measured - seeparagraph 2 of annex 7, appendix 1:
: ... kg
: ... kg
: ... kg
: ... kg
: not applicable
Instructions for the attachment of the coupling device or component type to the vehicle andphotographs or drawings of the mounting points given by the vehicle manufacturer:see instructions for attachment and use
10.
Coupling-component R55-01 v5.00
..
Page 2 oj3
--_U-J . -------
I
D
I
U
I
De
I
V
I
S
I
(kN) (tonnes) (kN) (kN) (kg)7,2 - - - 75
Approval number: E4-55R-010027 Extension number: 01
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
Information on the fitting of any special reinforcing brackets or plates or spacingcomponents necessary for the attachment of the coupling device or component:not applicable
Additional information where the use ofthe coupling device or component is restricted tospecial types ofvehicles - see annex 5, paragraph 3.4.:not applicable
For Class K hook type couplings, details ofthe drawbar eyes suitable for use with theparticular hook type:not applicable .Date of test report : 27-7-2007
Number of test report : 200106973 Extension 01
Approval mark position : on housing
Reason( s) for extension of approval . constructive modifications
Approval : grantedlextendedlrefusedlwithdrawn (1)
Place
Date
Signature
The list of documents deposited with the Administration Service which has granted.approval is annexed to this communication and may be obtained on request.
- Test report as mentioned in item 15- Instruction for attachment and use-Drawings
(I) Strike out what does not apply.
.
Coupling-component R55-01 v5.00 Page3013