Barozzi vernici S.r.l.
pag. 4
pag. 5
pag. 6-7
pag. 8
pag. 9
pag. 10
pag. 11
pag. 12
pag. 13
pag. 14
pag. 15
pag. 16-17
RUSTPROOF Products - Solvent-Based PRIMERS
L' altrosmalto, Idroprimer, Radiator, Oxifer, Idroflatting U.V., Idrowood
UNREGENERATED
Nuovo Galvant, Antifos, Sivifer, Siviopac, Coprimacchia antifumo
FIRE RESISTANT AND INTUMESCENT PAINTS
PENETRATING SEALERS, solvent-based PAINTS SUITABLE FOR WOOD
ECOLOGICAL Range - odourless, water-dilutable produ cts
Sintesol, Nitrosol, Aquarex INODOROTHINNERS formulated with pure raw materials
Resiol "gloss and matt", Minicolor, Hiltomar, Ottocento, Agricolor "gloss and matt"
BUILDING RANGE
Legnolack, Micotex Legno, Regent, Vampiro
Solvent-Based ENAMELS
FIXATIVES AND SEALERSFis-sol, Harz-acril, Muracril, Nanofix, Primer-sil
Barozzi paint, Divina, Decorpaint
Ecopaint breathable Ecopaint water-repellent Ecopaint washable
BREATHABLE WATER-REPELLENT PAINTS
PAINT FOR INTERIOR WALLS
Sivicolor, Bicolor
ECO-FRIENDLY PRODUCTS, V.O.C. free
WASHABLE WATER-BASED PAINTS
Maxicolor, Tintabella, spray , Supertempera, Candy
ANTI-MOULDGermosol, Germo fix, Germostop, Germocide, Germo-kill, Germopaint, Isothermica
pag. 1 di 28
Barozzi vernici S.r.l.
pag. 18
pag. 18
pag. 19
pag. 20
pag. 21
pag. 21
pag. 22
pag. 23
pag. 24-25
pag. 26
pag. 27
pag. 28
PAINT REMOVERS AND UNIVERSAL COLOURINGS
PRODUCTS ON REQUEST
Decazin, Ferbel, Nero Imperial catramina, Carbolineum 1°, Catrame liquido
Interamianto 257, Incapsulo AP163, Coverbit murale, Protex legno, Biowood
Beton colorPROTECTION OF FACING CONCRETE
Intocap
Superstrada, Sint-al 600, Nuovo Segnalinee
Owatrol, Oleorex, Idrorex, Flexigum, Colorgum 100, Silimat Murale, Rep-SIL, Idrorep
SILOXANES
WASHABLE QUARTZ PAINTS FOR EXTERIORS
ELASTOMERICS
FILLERS - STUCCOS AND NON-SHRINK MORTAR
SPECIAL PRODUCTS
WALL COATINGS
Collarasante, Maltanova, Cempexo, Stuccoben, Ben Hur
SQS linking ground, Contact plus, Twin Ground
Rasasil, Primersil, Intosil, Idrosil, Quarzosil
BUILDING RANGE
OTHER COMPLEMENTS
Magnum 5 Stelle, Realquarz
ELASTOfond 03, ELASTOquarz, ELASTOriv 1.2
Atomich, Atomich Murale, Unisystem, Iridex, Ossidi di Ferro
LINKING GROUNDS
PRODUCTS ON REQUEST
pag. 2 di 28
Barozzi vernici S.r.l.
and humidity is higher, and some unsightly looking, translucent and
sticky leakages could appear.
This temporary phenomenon, does not affect the performances of the
products and may be removed by washing or waiting for the next rainfall
event.
In unsuitable conditions, the application of the products is adversely
affected in drying times, and the achievement of the optimal appearance
and performance could be compromised.
WARNING
Apply products in suitable climatic conditions as mentioned in the
relevant technical sheets.
The physiological deterioration of the product or its colour over time is
not a sign of nonconformity of the same.
Not matured plasters and patches can cause fading, stains and
appearing of efflorescences.
In ideal weather conditions, drying and physical crosslinking occur in
about 7 days; yet, drying may take longer when temperatures are lower
pag. 3 di 28
Barozzi vernici S.r.l.
DESCRIPTION COLOURS CODE
Bright silicon enamel RESIOL "lucido"Extra-bright silicon enamel
for exteriors and interiors colour chart
RESIOL "gloss"RESIOL "matt" 001-002 • Kgs 20
Thinness 5-10% with Sintesol synthetic solvent 015-031 • Kgs 4
Application: brush – roller – spray
Yield: 9-10 m2/kg
miniCOLOR Resiol colour chart
000 – 001 – 050 – 051 – 013 – 021 – 024 standard 001.5L Lts 0,125
031 – 034 – 038 – 933 – 999
Resiol strong 002.5L Lts 0,125
025 – 030
Synthetic enamel HILTOMAR colour chart
Standard synthetic enamel for interiors standard 007.4L Lts 2,5
and exteriors 007.2L Lts 0,75
007.3L Lts 0,375
Thinness 3-10% with Sintesol synthetic solvent strong 008.4L Lts 2,5
Application: brush – roller – spray 225 - 226 - 230 008.2L Lts 0,75
Yield: 10-12 m2/lt 008.3L Lts 0,375
Micaceous enamel OTTOCENTO Anti-corrosive synthetic enamel 109 graphite 359.4L Lts 2,5
with ancient, micaceous effect 104 anthracite 359.3L Lts 0,75
Thinness: 3-10% with Sintesol synthetic solvent
Application: brush – spray
Yield: 8-10 m2/lt
Quick drying enamel AGRICOLOR "gloss" gloss white
Anticorrosive, lucid, quick drying, standard RAL 350.2L Lts 2,5
synthetic enamel 350.3L Lts 0,75
strong RAL 351.2L Lts 2,5
Yield: 8-10 m2/lt 351.3L Lts 0,75
AGRICOLOR "gloss"AGRICOLOR "matt" 350-351 • Kgs 20
Thinness: spray 10-15% with NITROsol 352-353 • Kgs 4
brush 5-10% with SINTEsol
Application: brush – spray
Yield: 7-8 m2/kg
UNISYSTEM tinting system
• available on request, in industrial packaging
PACK.
• available on request, in industrial packaging
UNISYSTEM tinting system
Solvent-Based ENAMELS
pag. 4 di 28
Barozzi vernici S.r.l.
DESCRIPTION COLOURS CODE
Primer-finish suitable for zinc NUOVO GALVANT Anti-corrosive satin primer-finish for iron, particularly matt black 047.6N • Kgs 20
suitable for galvanized supports and PVC.
For the aging of galvanized supports 047.6N • Kgs 20
we recommend "water-based" DECAZIN 047.4N • Kgs 4
Thinness: max 15% Sintesol synthetic solvent
Application: brush – roller – spray
Yield: 8-10 m2/kg
Rustproof F.D. ANTIFOS Fast drying rustproof primer, overcoatable with 003 pearl gray 063.3L Lts 2,5
synthetic - nitro - R.E. - polyurethane enamels 063.4L Lts 0,5
NITRO RESISTANT 063.6N • Kgs 26
Thinness: 5-10% with Sintesol synthetic solvent 063.3N • Kgs 5
10-15% with Nitrosol nitro solvent
Application: brush – spray
Yield: 8-10 m2/lt – 6-7 m2/kg
Traditional rustproof SIVIFER glycerophtalic anti-rust with anti-corrosive grey 070.2L Lts 2,5
pigments, overcoatable with synthetic enamels oxide red 070.3L Lts 0,5
Thinness: 5-10% with Sintesol synthetic solvent
10-15% with Nitrosol nitro solvent
Application: brush – spray
Yield: 6-8 m2/lt
Primer SIVIOPAC Matt filler for wood and walls matt white 079.2L Lts 2,5
easy to sand 079.3L Lts 0,5
Thinness: 3-5% with Sintesol synthetic solvent
Application: brush – roller – spray
Yield: 10-12 m2/lt
ODOURLESS anti-smoke smell COPRIMACCHIA antifumoIt blocks most stains on the walls including white colour 607.1L • Lts 15
smoke - nicotine - humidity - soot etc.
Thinness: 5-15% with Aquarex odourless solvent
Application: brush – roller
Yield: 8-10 m2/lt
• Product available on request
• available on request, in industrial packaging
• available on request, in industrial packaging
UNISYSTEM tinting system
Ral 7035 grey
PACK.
RUSTPROOF Products - Solvent-Based PRIMERS
pag. 5 di 28
Barozzi vernici S.r.l.
DESCRIPTION COLOURS CODE
Enamel L'ALTROSMALTO colour chart
Odourless, water-based acrylic enamel suitable standard 012.1L Lts 15
for interior and exterior bright finishes 012.2L Lts 2,5
012.3L Lts 0,75
strong 013.1L • Lts 15
013.2L Lts 2,5
013.3L Lts 0,75
standard RAL or 012.1L • Lts 15standard-pastel 012.9L • Lts 5
Thinness: max 5% with water strong RAL or 013.1L • Lts 15
Application: brush – roller – spray bright for interiors013.9L • Lts 5
Yield: 10-12 m2/lt 013.1L • Lts 15
• product available on request 013.9L • Lts 5
Rustproof primer IDROPRIMER universalewater-dilutable rustproof primer, suitable for wood, grey 018.2L Lts 2,5
iron, galvanized supports, aluminum, PVC, etc. Ral 7035 018.4L Lts 0,75
Thinness: 2-10% with water
Application: brush - roller - spray - dipping
Yield: 8-9 m2/lt (1 coat)
Primer finish paint RADIATOR Water-based primer/finish paint suitable for steel satin white 122.1L Lts 15
- cast iron - and aluminum radiators. 122.2L Lts 2,5
122.5L Lts 0,75
Thinness: 0-10% with water
Application: brush – spray
Yield: 7-8 m2/lt
Rust converter OXIFER IT PREVENTS, BLOCKS AND CONVERTS RUST milk white 077.2L Lts 4
077.4L Lts 0,375
when dry, it becomes BLACK ANTHRACITE 077.5L Lts 0,125
Thinness: max 0-5% with water only for spray application
Application: brush – spray
Yield: 16-18 m2/lt
ECOLOGICAL Range - odourless, water-dilutable products
UNISYSTEM tinting system
white 800-glossy 900-
eggshell satin
606-607 608-609
extra bright for interiors
PACK.
pag. 6 di 28
Barozzi vernici S.r.l.
DESCRIPTION COLOURS CODE
Paint IDROFLATTING U.V. Water-based transparent and protective paint transparent 118.6L Lts 20
NOT FLAKING AND WATER-REPELLENT gloss 118.2L Lts 2,5
118.4L Lts 0,75
transparent 118.6L Lts 20
satin 118.2L Lts 2,5
Thinness: ready to use 118.4L Lts 0,75
Application: brush – spray
Yield: 12-14 m2/lt
lacquered effect wood primer IDROWOOD water-based penetrating sealer transparent 119.6L Lts 20
with LACQUERED EFFECT satin 119.2L Lts 2,5
119.3L Lts 0,75
Thinness: ready to use dark walnut 119.6L • Lts 20
Application: brush – spray mahogany 119.2L Lts 2,5
dipping walnut 119.3L Lts 0,75
Yield: 14-16 m2/lt rosewood
• product available on request douglas
PACK.
ECOLOGICAL Range - odourless, water-dilutable products
pag. 7 di 28
Barozzi vernici S.r.l.
DESCRIPTION COLOURS CODE
Penetrating sealer LEGNOLACK Protective finish with impregnation properties transparent 024.1L Lts 15
suitable for wood satin 024.2L Lts 2,5
LACQUERED EFFECT 024.3L Lts 0,75
dark walnut 024.1L • Lts 15
Thinness: 0-4% with Sintesol synthetic solvent durmast 024.2L Lts 2,5
Application: brush – spray antique walnut 024.3L Lts 0,75
dipping mahogany
Yield: 14-16 m2/lt walnut
• product available on request douglas
Penetrating sealer MICOTEX LEGNO Penetrating sealer for wood preservation transparent 022.1L Lts 15
against mould, fungi and bacteria satin 022.2L Lts 2,5
022.3L Lts 0,75
Thinness: ready to use colour chart 023.1L • Lts 15
Application: brush – spray 023.2L Lts 2,5
dipping - pad 023.3L Lts 0,75
Yield: 14-16 m2/lt
• product available on request
Varnish suitable for wood REGENT Urethane, thin, monocomponent varnish transparent 025.1L • Lts 15
ideal for exteriors gloss 025.2L Lts 2,5
025.3L Lts 0,75
Thinness: 3-10% with Sintesol synthetic solvent transparent 027.1L • Lts 15
Application: brush – spray satin 027.2L Lts 2,5
Yield: 12-14 m2/lt 027.3L Lts 0,75
• product available on request
VAMPIRO preventive and curative liquid transparent 634.2L Lts 5
against all wood attacking insects 634.3L Lts 1
Suitable for all kind of essences
Thinness: ready to use
Application: brush – dipping - injection
Yield: not quantifiable
anti woodworm, solvent-based product
PENETRATING SEALERS, solvent-based PAINTS SUITABLE FOR WOOD
PACK.
pag. 8 di 28
Barozzi vernici S.r.l.
DESCRIPTION COLOURS CODEFire resistant and intumescent paint
Years of successful co-operation with qualified suppliers allowed
CERTIFIED PRODUCTS
PACK.
Full service with technical reports and calculation of requested material
for the fire reaction (class 1)
and for the increase in the fire resistance
to offer FIRE RESISTANT and INTUMESCENT products
available for wood, steel and wall supports
FIRE RESISTANT AND INTUMESCENT PAINTS
(on request)
pag. 9 di 28
Barozzi vernici S.r.l.
DESCRIPTION COLOURS CODE
Synthetic thinner SINTEsol Universal thinner colourless 310.2L Lts 5
ideal for synthetic products and chlorinated rubber 310.3L Lts 1
(enamels – primers – rust inhibitors)
310.5L • Lts 25
Nitre thinner NITROsol anti-fog thinnerStandard thinner ideal for nitre and synthetic 308.2L Lts 5
products, R.E. and central reservation colourless 308.3L Lts 1
(enamels – primers – rust inhibitors)
308.6L • Lts 200
308.5L • Lts 25
Odourless thinner AQUAREX INODORODearomatized odourless thinner colourless 309.3L Lts 1
ideal for general synthetic products,
and suitable for COPRIMACCHIA ANTIFUMO products
ODOURLESS
• available on request, in industrial packaging
• available on request, in industrial packaging
THINNERS formulated with pure raw materials
UNREGENERATEDPACK.
pag. 10 di 28
Barozzi vernici S.r.l.
DESCRIPTION COLOURS CODE
Solvent-based fixative FIS-SOL "prontouso"Solvent-based penetrating sealer transparent 106.2L Lts 25
ideal for exteriors, based on Goodyear pliolite 106.3L Lts 5
Thinness: ready to use
Application: brush – roller – spray
Yield: 6-7 m2/lt
water-based fixative HARZ-ACRIL Vinyl acrylic fixative transparent 114.6L Lts 20
ideal for interior and exterior walls 114.3L Lts 5
114.5L Lts 1
Thinness: 1 part over 4 water
Application: brush – roller – spray
Yield: 4-5 m2/lt
Consolidating fixative MURACRIL Water-based acrylic sealer ideal for exteriors, transparent 116.6L Lts 20
with high penetration capacity 116.3L Lts 5
Thinness: 1 part over 5 water
Application: brush – roller – spray
Yield: 5-6 m2/lt
Nanotecnology NANOFIX
Acrylic primer for interior/exterior walls transparent 135.6L Lts 20
based on nanoparticles in emulsion 135.3L Lts 5
135.5L Lts 1
thinness: 1 part nanofix + 1 part water white 140,1L Lts 15
application: brush colours (no TC) 140,1L Lts 15
Yield: 6 m2/lt
Siloxane fixative PRIMERsil Consolidating acryl-siloxanic fixative transparent 210 6L Lts 20
210.3L Lts 5
Thinness: 1 part over 1 with water
Application: brush – roller
Yield: 5-6 m2/lt
FIXATIVES AND SEALERSPACK.
pag. 11 di 28
Barozzi vernici S.r.l.
DESCRIPTION COLOURS CODE
Professional paint MAXICOLOR Breathable wall paint with high covering power white 207.1L Lts 15
Thinness: 20-30% with water
Application: brush – roller – spray
Yield: 7-8 m2/lt
Extra wall paint TINTABELLA Semi-washable breathable paint white 217.1L Lts 15
GOOD COVERAGE 217.3L Lts 5
colour chart
002 - 004 218.1L Lts 15
006 - 007 - 009 218.3L Lts 5
Thinness: 30-40% with water
Application: brush – roller – spray 218.1L Lts 15
Yield: 7-8 m2/lt pastel
"spray" paint AIRLESS ideal for interiorssemi-washable, high coverage paint white 220.1L Lts 15
MICRONIZED formula TC2407 ice
Thinness: 30-40% with water
Application: brush – roller – spray 220.1L Lts 15
Yield: 7-8 m2/lt pastel
Wall paint SUPERTEMPERA semi-washable breathable wall paint white 209.1L Lts 15
high coverage 209.2L Lts 10
209.3L Lts 5
209.5L Lts 2,5
Thinness: 20-30% withf water
Application: brush – roller – spray
Yield: 6-7 m2/lt
Tempera paint CANDY Wall tempera paint for interiors white 221.1L Lts 15
Thinness: 25-30% with water
Application: brush – roller – spray
Yield: 6-7 m2/lt
PACK.
TC2482 ice - TC2860 ivory available on request - minimum 80 pcs
TC 3633 ivory available on request - minimum 80 pcs
UNISYSTEM tinting system
PAINT FOR INTERIOR WALLS
UNISYSTEM tinting system
pag. 12 di 28
Barozzi vernici S.r.l.
DESCRIPTION COLOURS CODE
Water-repellent paint SIVICOLOR Water-repellent, washable, breathable white 095.1L Lts 15
and self-cleaning paint with high coverage 095.2L Lts 4
ideal for interiors and exteriors 095.4L Lts 0,75
colour chart 096.1L Lts 15
096.3L Lts 4
096.4L Lts 0,75
Thinness: 20-30% with water
Application: brush – roller – spray pastel 096.1L Lts 15
Yield: 8-9 m2/lt
SIVICOLOR standard coloursWashable, breathable paint 097.1L Lts 15
with high dye concentration 001 - 002 097.3L Lts 4
003 - 004 097.4L Lts 0,75
098.1L Lts 15
Thinness: 20-30% with water 011 - 012 - 013 098.3L Lts 4
Application: brush – roller – spray 014 - 015 - 016 098.4L Lts 0,75
Yield: 8-9 m2/lt
BICOLOR white breathable water-based titanium paint white 102.1L Lts 15
ideal for interiors with high coverage 102.3L Lts 4
Thinness: 20-30% with water
Application: brush – roller pastel 102.1L Lts 15
Yield: 7-8 m2/lt
thin-based colours
Breathable paint for interiors
BREATHABLE WATER-REPELLENT PAINTS
UNISYSTEM tinting system
PACK.
oxide-based colours
UNISYSTEM tinting system
pag. 13 di 28
Barozzi vernici S.r.l.
DESCRIPTION COLOURS CODE PACK. 0
Washable paint for exteriors BAROZZI PAINT Extra washable premium quality acrylic paint white 174.1L Lts 14
ideal for exteriors 174.3L Lts 5
174.4L Lts 0,75
standard-pastel 174.1L Lts 14
174.3L Lts 5
bright 174.1L Lts 14
Thinness: 30-40% with water 174.3L Lts 5
Application: brush – roller – spray extra bright 174.1L Lts 14
Yield: 8-9 m2/lt 174.3L Lts 5
Nanotechnology DIVINA Washable, water-based paint for interiors white 194.2L Lts 14
with high covering power. Easy to paint
LOW V.O.C. CONTENT
Thinness: 30% with water
Application: brush – roller – spray
Yield: 9-10 m2/lt
Washable paint for interiors DECORPAINT Washable, acrylic, water-based paint white 181.1L Lts 15
breathable and eco-friendly
Thinness: 30-40% with water
Application: brush – roller – spray standard-pastel 181.1L Lts 15
Yield: 8-10 m2/lt
WASHABLE WATER-BASED PAINTS
UNISYSTEM tinting system
UNISYSTEM tinting system
pag. 14 di 28
Barozzi vernici S.r.l.
DESCRIPTION COLOURS CODE
Breathable paint ECOPAINT BreathableBreathable water-based paint for interiors white 129.2L • Lts 14
with high coverage 129.4L • Lts 4
V.O.C. free
NO
Thinness: 30-40% with water
Application: brush – roller – spray
Yield: 8-10 m2/lt
• product available on request
(minimum batch: 600 lts)
water-repellent paint ECOPAINT Water-repellentBreathable water-repellent, water-based paint white 130.2L • Lts 14
for interiors, with high coverage and yield
V.O.C. free
Thinness: 30-40% with water NO
Application: brush – roller – spray
Yield: 10-11 m2/lt
• product available on request
(minimum batch: 40 pcs)
Washable paint ECOPAINT WashableWashable water-based paint for interiors white 131.2L • Lts 14
with high coverage and yield
V.O.C. free
Thinness: 35-40% with water NO
Application: brush – roller – spray
Yield: 11-13 m2/lt
• product available on request
(minimum batch: 40 pcs)
UNISYSTEM tinting system
ECO-FRIENDLY PRODUCTS, V.O.C. free
UNISYSTEM tinting system
UNISYSTEM tinting system
PACK.
pag. 15 di 28
Barozzi vernici S.r.l.
DESCRIPTION COLOURS CODE
Detergent GERMOSOL Anti-mould bacterical detergent transparent 201.3L Lts 5
201.5L * Lts 0,5
Thinness:: ready to use
Application: brush – spray
Yield: 8-10 m2/lt
* spray
Disinfectant GERMO FIX Disinfectant for fungi and bacteria transparent 200.6L Lts 20
ideal for interiors. 200.3L Lts 5
it prevents mould formation 200.4L Lts 1
Thinness: 1 part over 1 water
Application: brush – spray
Yield: 9-11 m2/lt of solution each coat
Disinfectant for exteriors GERMOSTOP ready to useAnti-mould and ANTI-ALGAE treatment transparent 204.6L Lts 20
specific for exterior northern walls. 204.3L Lts 5
Thinness: ready to use
Application: brush
Yield: 5 m2/lt
Additive GERMOCIDE Anti-mould additive for water-based paints neutral white 205.5L Lts 0,5
non covering
Thinness: ready to use
Application:
To be added directly
lts 0,5 Germocide per lts 5 of water-based paint
PACK.
ANTI-MOULD
pag. 16 di 28
Barozzi vernici S.r.l.
DESCRIPTION COLOURS CODE
anti-mould water-based paint GERMO-KILL Water-based paint for hard interior wall surfaces white 203.1L Lt 15
with high anti-mould and sanitizing properties
Thinness: 30% with water
Application: brush – roller – spray
Yield : 8-9 m2/lt
anti-mould water-based paint GERMO PAINT Special breathable paint for interior wall surfaces white 202.1L Lt 15
with antibacterial properties. 202.3L Lt 4
202.4L Lt 0,75
Thinness: 20-30% with water
Application: brush – roller
Yield: 8-9 m2/lt
Anticondensation paint ISOTHERMICA Breathable water-based paint for interiors with white 191.1L Lt 15
anticondensation, anti-mould. 191.4L Lt 4
Sound absorbing properties.
Thinness: 20-25% with water
Application: brush – roller
Yield: 1st coat 6-8 m2/lt
2nd coat 3-4 m2/lt (200 microns)
ANTI-MOULDPACK.
pag. 17 di 28
Barozzi vernici S.r.l.
DESCRIPTION COLOURS CODE
Algae resistant MAGNUM 5 stelle Extra washable quartz acrylic paint white 182.1L Lts 15
medium flexibility
algae resistant for exteriors
standard-pastel 182.1L Lts 15
Thinness: 15-20% with water bright 182.1L Lts 15
Application: brush – roller extra bright 182.1L Lts 15
Yield: 7-8 m2/lt
For interiors and exteriors REALQUARZ Quartz paint for interior and exterior surfaces white 178.1L Lts 15
178.3L Lts 5
standard-pastel 178.1L Lts 15
Thinness: 20-30% with water 178.3L Lts 5
Application: brush – roller bright 178.1L Lts 15
Yield: 7-8 m2/lt 178.3L Lts 5
DESCRIPTION COLOURS CODE PACK.
Paint for concrete BETON color water-resistant covering water-based paint white 180.1L Lts 14
for the protection of exposed concrete
standard-pastel 180.1L Lts 14
Thinness: 10-20% with water bright 180.1L Lts 14
Application: brush – roller – spray extra bright 180.1L Lts 14
Yield: 10-11 m2/lt
PACK.
PROTECTION OF FACING CONCRETE
UNISYSTEM tinting system
UNISYSTEM tinting system
about prices and delivery times
To ask for sample colours, talk to the Sales Offic e
UNISYSTEM tinting system
WASHABLE QUARTZ PAINTS FOR EXTERIORS
pag. 18 di 28
Barozzi vernici S.r.l.
DESCRIPTION COLOURS CODE PACK.
Covering primer SQS LINKING GROUNDUniforming primer for acrylic, siloxanic
water-based paints and silicates white 216.1L Lts 15
(granulometry 0,7 mm.) pastel colours 216.1L Lts 15
Ideal on plasterboard to obtain
plaster effect
Thinness: 15-20% with water
Application: brush – roller
Yield: 5-6 m2/lt
Overpaintable after 6/8 hours
Linking ground CONTACT plus Acrylic uniforming linking ground, added with fibers
(granulometry 0,7 mm.) white 219.1L Lt 15
Ideal on plasterboard to obtain pastel colours 219.1L Lt 15
plaster effect
Thinness: 15-20% with water
Application: brush – roller
Yield: 3-4 m2/lt
Overpaintable after 6/8 hours
Linking ground TWIN GROUND Medium-grained pigmented acrylic linking ground
(granulometry 0,3 mm.) with filling and uniforming white 223.1L Lts 15
properties for smooth or irregular surfaces. pastel colours 223.1L Lts 15
Ideal on plasterboard to obtain
plaster effect
Thinness: 15-20% with water
Application: brush – roller
Yield: 4-5 m2/lt (1 coat)
Overcoatable after 6/8 hours
LINKING GROUNDS
pag. 19 di 28
Barozzi vernici S.r.l.
DESCRIPTION COLOURS CODE PACK.
Leveling RASAsil Siloxanic leveling with uniforming property white 214.1L Lts 15
for deteriorated walls coloured 214.1L Lts 15
Thinness: 15-20% with water
Application: brush
Yield: 4-6 m2/lt
Fixative PRIMERsil Consolidating acryl-siloxanic fixative transparent 210 6L Lts 20
210.3L Lts 5
Thinness: 1 part over 1 with water
Application: brush – roller
Yield: 5-6 m2/lt
Plaster INTOSIL Waterproof siloxanic coating white 588.2N Kgs 25
ANTI-ALGAE, plaster effect
Thinness: ready for use standard-pastel 588.2N Kgs 25
Application: stainless steel float + plastic bright 588.2N Kgs 25
Yield: 2-2,2 m2/kg extra bright 588.2N Kgs 25
water-based paint IDROsil Water-based acrylic paint for exteriors white 215.1L Lts 15
modified with siloxanes.
Waterproofing and ANTI-ALGAE properties
Thinness: 15-20% with water standard-pastel 215.1L Lts 15
Application: brush – roller bright 215.1L Lts 15
Yield: 8-9 m2/lt extra bright 215.1L Lts 15
quartz paint QUARZOsil Protective siloxanic quartz paint white 212.1L Lts 15
for exteriors
breathable, waterproof, ANTI-ALGAE
Thinness: 15-20% with water standard-pastel 212.1L Lts 15
Application: brush – roller bright 212.1L Lts 15
Yield: 8-9 m2/lt extra bright 212.1L Lts 15
UNISYSTEM tinting system
UNISYSTEM tinting system
UNISYSTEM tinting system
SILOXANES
pag. 20 di 28
Barozzi vernici S.r.l.
DESCRIPTION COLOURS CODE PACK.
Plaster INTOCAP Acrylic coating with PLATER effect. white 154.2N Kgs 25
Thinness: ready to use (max 1%) standard-pastel 154.2N Kgs 25
Application: stainless steel float + plastic bright 154.2N Kgs 25
Yield: 2-2,2 m2/kg (1 coat) extra bright 154.2N Kgs 25
DESCRIPTION COLOURS CODE PACK.
Filling ground ELASTOfond 03 Elastomeric filling ground white 173.1L Lts 15
ideal for micro-crackled supports
Thinness: 5-15% with water
Application: brush – roller pastel 173.1L Lts 15
Yield: 5-6 m2/lt (1 coat)
Paint ELASTOquarz Elastomeric quartz finish white 167.1L Lts 15
waterproofing, permanent flexibility
fibre-reinforced
Thinness: 5% with water standard-pastel 167.1L Lts 15
Application: brush – roller bright 167.1L Lts 15
Yield: 7-8 m2/lt extra bright 167.1L Lts 15
Plaster ELASTOriv 1.2 Elastomeric coating white 170.2N Kgs 25
PLASTER effect
anti-algae, fiber reinforced
Thinness: ready for use standard-pastel 170.2N Kgs 25
Application: stainless steel float + plastic bright 170.2N Kgs 25
Yield: 2 m2/kg (1 coat) extra bright 170.2N Kgs 25
WALL COATINGS
UNISYSTEM tinting system
UNISYSTEM tinting system
UNISYSTEM tinting system
ELASTOMERICS
UNISYSTEM tinting system
pag. 21 di 28
Barozzi vernici S.r.l.
DESCRIPTION COLOURS CODE PACK.
Fibre-reinforced COLLARASANTE Fibre-reinforced bicomponent adhesive and leveling quartz grey 540.1N Kgs 25
paste for thermal insulation composite systems
Thinness: 1:1 Collarasante: concrete + water
Application: stainless steel float or sponge
Yield: 0,5-1 m2/kg
Plaster for levelings MALTANOVA Non-shrink filling mortar light grey 537.2N Kgs 25
for internal and external shaving and plastering
it does not drop or crack, invisibile touch-ups
work with clean water till you get
the desired consistency. AVOID HUMIDITY
Thinness: water (5-6 Lts each sack)
Application: stainless steel float or sponge
Resa: 1,5-1,8 m2/kg for 1mm thickness
CEMPEXO Special breathable paint-coating white 595.1N # Kgs 25
against humidity and spots grey
Thinness: water – 25% brush 18% palette knife
Application: brush – palette knife
Yield: not quantifiable
# packaged in gross weight
Paste plaster STUCCOBEN French paste plaster white 233.2N Kgs 5
for wood and masonry 233.3N Kg 1
233.4N Kgs 0,5
Thinness: ready for use 233.5N Kgs 0,25
Application: palette knife
Yield: not quantifiable
Powder plaster BEN HUR Filling powder plaster for white 235.1N Kgs 25
wood, walls and minor plaster constructions 235.3N Kgs 5
235.4N Kg 1
Thinness: 2:1 ben hur : water
Application: palette knife – float
Yield: not quantifiable
Leveling for: plasterworks - crackled facades - plasterboard - coat
Paint-Coating against humidity
FILLERS - STUCCOS AND NON-SHRINK MORTAR
Adhesive for: ceramics - skirting board - polystyrene - electrical boxes - fill-ins
pag. 22 di 28
Barozzi vernici S.r.l.
DESCRIPTION COLOURS CODE PACK.
Universal ATOMICH Strong universal paint remover NOT FLAMMABLE transparent 250.1L Lts 17
for enamels - paints - grounds 250.3L Lts 4
FREE FROM METHYLENE CHLORIDE 250.4L Lts 0,75
Thinness: ready for use
Application: brush – pad – palette knife
Yield: not quantifiable
Mural ATOMICH murale Strong paint remover NOT FLAMMABLE transparent 249.1L Lts 17
for water-based paints - wall plastic coatings 249.3L Lts 4
FREE FROM METHYLENE CHLORIDE
Thinness: ready for use
Application: brush – pad – palette knife
Yield: not quantifiable
Colourings UNISYSTEM Universal colourings oxides 229.5L Lts 0,5
for the colouring and correction of LW1 yellow ox
water-based paints - plastic coatings - enamels LW11 red ox
lime-based products, etc. LW41 black
LW21 burnt sienna
LW - for interiors and exteriors thin: 230.5L Lts 0,5
L - ONLY for interiors LW51 bleu
LW62 bright green
L2 sun yellow
Thinness: ready for use L12 bright red
L32 orange
Universal colourings IRIDEX Concentrated universal colourings for
water based and solvent based products 227.3 ml 40
Thinness: ready for use
227.5 ml 20
Powder oxides OSSIDI DI FERRO Powder iron oxides yellow 361.4N Kgs 0,5
red 362.4N Kgs 0,5
black 363.4N Kgs 0,5
brown 364.4N Kgs 0,5
concrete blue 365.4N Kgs 0,5
chrome green 366.4N Kgs 0,5
PAINT REMOVERS AND UNIVERSAL COLOURINGS
10-forest green 20-bright red
30-oxide black 50-violet
60-oxide brown 70-lemon yellow
90-orange 110-grass green 120-oxide yellow
130-blue 140-chrome
yellow 220-oxide red
pag. 23 di 28
Barozzi vernici S.r.l.
DESCRIPTION COLOURS CODE PACK.
Anti rust bloom OWATROLAnti rust bloom product transparent AC9.3L Lts 5
and additive for synthetic enamels AC9.5L Lts 0,5
Yield: not quantifiable
OLEOREX 50Fluorinated solvent-based protective transparent 036.1L Lts 25
with water-oil repellent effect 036.2L Lts 5
Thinness: ready for use
Application: brush – spray
Yield: 4-5 m2/lt (1 coat)
IDROREX 50Fluorinated water-based protective NON-TOXIC transparent 038.6L Lts 20
with water-oil repellent effect 038.3L Lts 5
Thinness: ready for use
Application: brush – spray
Yield: 4-5 m2/lt (1 coat)
IDROREX 200Concentrated fluorinated water-based protective transparent 040.6L Lts 20
NON-TOXIC with water-oil repellent effect 040.3L Lts 5
IDEAL for CONCRETE TANKS used
for permanent containment of water
Thinness: ready to use
Application: brush – spray
Yield: 5 m2/lt (1 coat)
Fluorinated solvent-based protective
Fluorinated water-based protective
Fluorinated water-based protective
• available on request, in
industrial packaging
SPECIAL PRODUCTS
• lts 50 - 200 - 1000
• lts 50 - 200 - 1000
• available on request, in
industrial packaging
pag. 24 di 28
Barozzi vernici S.r.l.
DESCRIPTION COLOURS CODE PACK.
Membrane FLEXIGUM Waterproofing flexible membrane white 162.1L Lts 15
for roofs and terraces 162.2L Lts 5
Thinness: max 20% with water
Application: brush - roller - spray
Yield: 3 m2/lt each coat
Clorinated rubber enamel COLORGUM - 100Pure clorinated rubber finish and plasticizers 612.4N • Kgs 4
for swimming pools, floors, waterproofings standard RAL 613.4N Kgs 4
and maintenance in marine environment strong RAL 612.4N Kgs 4
Thinness: 1st coat 15% - subsequent coats 10% 613-612 • Kgs 20
with Sintesol synthetic thinner
Application: brush - roller - spray
Yield: 5-6 m2/kg
Silicon protective SILIMAT muraleRain-proof protective silicon filler transparent 035.1L Lts 25
FOR UPRIGHT SURFACES 035.2L Lts 5
water-repellent for porous and face view buildings 035.3L Lts 1
IT DOES NOT CHANGE THE ASPECT OF THE SUPPORT
Thinness: 5% with Sintesol synthetic thinnerApplication: brush – roller – spray APPLY 2 COATS TO REACH SATURATION
Yield: 8-10 m2/lt
Water-repellent solvent REP-SIL Highly water-repellent solution transparent 037.1L Lts 25
for absorbent minor constructions 037.2L Lts 5
IT DOES NOT CHANGE THE ASPECT OF THE SUPPORT
Thinness: ready to useApplication: brush – roller APPLY 1 COAT TO REACH SATURATION
Yield: 5-6 m2/lt
Water-repellent solution IDROREP Water-repellent silicon water-based solution transparent 039.7L Lts 20
(suitable for plaster) 039.2L Lts 5
Thinness: ready to useApplication: brush – roller APPLY 1 COAT TO REACH SATURATION
Yield: about 5-6 m2/lt (according to the support)
• available on request
002 swimming pool blue
SPECIAL PRODUCTS
UNISYSTEM tinting system
pag. 25 di 28
Barozzi vernici S.r.l.
DESCRIPTION COLOURS CODE PACK.
Detergent for zinc supports DECAZIN "all'acqua"Detergent and degreasing solution transparent 051.7L Lts 20
FOR ZINC-COATED SUPPORTS 051.1L Lts 5
fast ageing
Thinness: ready for use
Application: brush – dipping
Yield: 18-20 m2/lt
Degreaser for iron FERBEL Water-based industrial detergent-degreaser colourless 312.1L Lts 5
for iron minor constructions
Thinness: ready for use
Application: brush – rag – dipping
roller – spray
Yield: not quantifiable
Tar NERO IMPERIAL "catramina"Black paint for iron, scaffolds, pipings and tanks bright black 274.6N Kgs 4
to be laid underground 274.5N Kgs 1
Thinness: spray NITRO/SINTEsol all that is necessary
brush 5-10% SINTEsol 274.1N • Kgs 200
Application: brush – spray – dipping 274.3N • Kgs 20
Yield: 7-8 m2/kg
• product available on request
Chemical distillate CARBOLINEUM 1° RESINATE matt black 276.1N • # Kgs 200
Liquid chemical distillate compound 276.6N # Kgs 18
275.4N # Kgs 4
Thinness: ready to use 275.5N # Kgs 1
Application: brush – spray – dipping
Yield: 5-6 m2/kg
• product available on request
# packaged in gross weight
CATRAME LIQUIDOLiquid chemical distillate 279.5N # Kgs 18
278.4N # Kgs 4
278.5N # Kgs 1
# packaged in gross weight
• available on request, in industrial packaging
OTHER COMPLEMENTS
pag. 26 di 28
Barozzi vernici S.r.l.
DESCRIPTION COLOURS CODE PACK.
For removal INTERAMIANTO 257 Insulating - fixative - inertizing for the removal type 000 112.6L Lts 20
of concrete/asbestos minor constructions (ready for use)
(encapsulation type D) type 050 113.6L Lts 20
colours: red/transparent green + on request (thin. 2:1 water)
type 100 134.6L Lts 20
(thin. 1:1 water)
type 300 126.6L Lts 20
Application: brush – roller – spray (thin. 1:3 water)
Yield: 4-5 m2/lt when thinned
For encapsulation INCAPSULO AP163 Protective paint for encapsulation white 165.xL Kgs 20
of concrete/asbestos minor constructions grey 165.xL Kgs 8
red
Thinness: 1st coat 40% - 2nd coat 10% with water oxide green
Application: brush – roller – spray
Yield: please see data sheet
Water-based enamel COVERBIT muraleWater-based acrylic enamel white 625.1L Lts 15
for basements and footings 625.3L Lts 5
standard-pastel 625.1L Lts 15
625.3L Lts 5
bright for interiors 625.1L Lts 15
Thinness: 10-12% with water 625.3L Lts 5
Application: brush – roller 625.1L Lts 15
Yield: 8-10 m2/lt 625.3L Lts 5
Penetrating wood sealer PROTEX Legno Solvent-based penetrating wood sealer 020.2L Lts 15
Thinness: ready to use coloured 020.2L • Lts 15
Application: brush – dipping
Yield: 14-16 m2/lt
• product available on request = minimum 100 Lts
Penetrating wood sealer BIOWOOD Water-based penetrating wood sealer 125.2L Lts 15
coloured 125.2L Lts 15
Thinness: ready to use
Application: brush – spray – dipping
Yield: 10-12 m2/lt
satin transparent
PRODUCTS ON REQUEST
on request: industrial packagings
Approved and Certified
extra bright for interiors
UNISYSTEM tinting system
satin transparent
pag. 27 di 28
Barozzi vernici S.r.l.
DESCRIPTION COLOURS CODE PACK.
Central reservation line SUPERSTRADA Paint for central reservation lines
refracting white 617.1N Kgs 30
not refracting 620.1N Kgs 30
Thinness: 8-10% with Nitro thinner Nitrosol
Application: brush – spray
Yield: 5-7 m2/lt
Aluminium paint SINT-AL 600 Silicon aluminium paint for bright 005.6L • Lts 15
working temperature up to 600° C aluminium 005.4L Lts 4
Thinness: ready for use
Application: brush – roller – spray
Yield: 10-12 m2/lt
• product available on request
Paint NUOVO SEGNALINEE Ecological paint for football fields white 621.1L Lts 15
Thinness: up to 300% with water
Application: spray
Yield: not quantifiable
PRODUCTS ON REQUEST
pag. 28 di 28