7/29/2019 Eld Brochure
1/10
7/29/2019 Eld Brochure
2/10
Strictly controlled Alloy andAlloy andCarbon steelCarbon steel from the bestItalian steel mills.
For high performances alsoat low temperatures, and for
longer lifespan.
High resistance safety catchHigh resistance safety catch
Lifting and Wire Rope Accessories.Lifting and Wire Rope Accessories.According to EN 1677.
Swivel HooksSwivel Hooks.New improved model.The changes are the result
of many years of experience
and millions of pieces sold.
Lifting capacity from 0.8 tons
up to 30 tons.
A large number of possible
applications.
Two configurations are
available: with and without
under-load rotation.
Series 168 and 167.Series 168 and 167.
Light and heavy dutyLight and heavy dutybearingsbearings
Eye Hoo k 101 seriesEye Hook 101 series
7/29/2019 Eld Brochure
3/10
General recommendationsGeneral recommendationsabout Lifting Components.about Lifting Components.
You can get the warning and application instructions of
our products by contacting ELD technical department or bydownloading them yourself from internet together with the
updated catalogue.
ELD distributors have to be concerned that end-users are
knowledgeable with, use, inspection and maintenance of
our products.
O.E.M.s that install ELD lifting components on their machi-
nes, are responsible for their correct application.
ELD lifting devices must always be used in full compliance
with the manufacturers instructions and with the regula-tions in force.
Do not make modifications without specific approval by
the ELD technical office.
Do not exceed the Working Load Limit. Shock loading must
be avoided.
Fitness, positioning and grip of the loads must always be
checked before lifting operations.
Markings and ID tags must never be altered.
The WLL must be adequately reduced in case of severe
and corrosive environments. In these operating conditions
and in the presence of possible wear or damage, it is ne-
cessary to have a comprehensive examination made by a
qualified inspector.
Improper use can create a seriously dangerous situationImproper use can create a seriously dangerous situationfor the safety of exposed persons.for the safety of exposed persons.
A complete range ofaccessories for one
or more leg chain
slings according to
EN 818-4.
Single Master LinkSingle Master Linkand Sub-Assembly:and Sub-Assembly:151-302 series.151-302 series.Grade 8 Chain:Grade 8 Chain:180 series.180 series.
Spare Parts always available in stock
Our lifting accessories
are supplied in ELD
standard color
Matt Red.
Other colors availablewith manufacturing
batch size.
7/29/2019 Eld Brochure
4/10
Grade 8 Chain Fittings.Grade 8 Chain Fittings.According to EN 1677.According to EN 1677.
Clevis andClevis andEye Grab Hooks:Eye Grab Hooks:184 and 183 series184 and 183 seriesConnecting link:Connecting link:181 series.181 series.
Precise machining and
controlled heat treatment in
order to obtain a real fatigue
resistance.
Self Locking HooksSelf Locking Hooksfor the highest safety:
Eye 102, Clevis 103,Eye 102, Clevis 103,Swivel 105 and 106, series.Swivel 105 and 106, series.
Il BG-PRFZERTBG-PRFZERT is pro-of of the specific competenceown by ELD.We are committed to supplyinga reliable product which is infull compliance with industrynorms.
Clevis Hook: 179 seriesClevis Hook: 179 series
8888
7/29/2019 Eld Brochure
5/10
C
Bottom BlocksBottom Blocksof all sizesand geometries, from the simplest
to the most complex.
The special bottom blocks aremanufactured in a dedicated de-
partment.
A team of engineers has achieved
an International reputation in the
sector of: overhead, mobile, tow-
er, marine, offshore cranes and in
the problem solving connected to
the lifting field in general.
The design and the relating cal-culations of bottom blocks are
developed by maintaining a con-
stant dialogue with the customer,
focusing on the final application
of the product in order to obtain
the best overall result.
All products are developed in con-
formity with F.E.M. 1.001 norms
and following the latest and most
important national and interna-
tional required rules.
ELD Standard Overhead CraneblockELD Standard Overhead Craneblock from oneup to four sheaves, (1UB1UB, 1HB1HB, 1HA1HA seriesseries) thesimplest and most tested solution
7/29/2019 Eld Brochure
6/10
We can manufacture
batches of spe-
cial accessories
in drop forged
steel, com-
plete withdesign and
i n s p e c t i o n
test in order to
fulfill specific
requirements of
the customers.
cture
pe-
Our patented Weld-On Bucket HooksWeld-On Bucket Hooksmade in Sweden, are well known all
over the world.
We can adapt our
standard components
to new applications.
C and U seriesC and U series
Bow S hackle Screw PinBow Shackle Screw Pinand Safety Bolt: 122 123 seriesand Safety Bolt: 122 123 series
Plain Swivel underloadPlain Swivel underload1 18 series118 series
Sliding Choker HookSliding Choker Hook112 series.112 series.
Also available optionAlso available optionwith greaser on rotatingwith greaser on rotatingelementselements
7/29/2019 Eld Brochure
7/10
The chemical analysis of steel,
the heat treatment and the
controls imposed by the norms
are scrupulously respected.
Quality accepts no compromises.Quality accepts no compromises.
We can supply a single
item or serial production
in order to obtain the best
quality-price ratio.
We can offer various
compact solutions for
motorized blocks.
Hook Block for steel mill.
7/29/2019 Eld Brochure
8/10
ELD is the Division of FEAT Group SpA which
specializes in hooks and other components for
the lifting industry.
Feat is located in the Milano area which is known
as a worldwide leader in engineered steel hot
forgings for high performance and safety appli-
cations.
FEAT makes use of technologically advanced
closed die mechanical presses which are auto-mated using robots.
The combination of ELDs engineering expertise
in designing lifting components and the produc-
tion forging expertise of FEAT, allows us to sup-
ply a superior product in compliance with indus-
trial norms and the highest quality standards.
The information contained in this brochure is for
commercial and illustrative use only.
The photos and data may vary with the actual
product. For more information please contact
our technical office or consult our official cata-
logue.
ELD is a dynamic company and its range ofproducts can be modified or integrated as nec-
essary per customer requirements, or changes
to industry standards.
ELD guarantees quick deliveries by keeping in
stock all of the standardstandard items shown in thisbrochure.
ELD International distributors are carefully se-
lected directly by our head office and are re-
quired to uphold the highest lever of profession-
alism.
Thanks to a vertical organization it is always
possible to develop strategic projects directly
with company owners. Our board direction and
engineers are always available for offering tech-
nical and production assistance.
ELD can offer customized solutions for important
clients. The technical co-operation with custom-
ers is essential in order to develop a final prod-
uct which fully fulfills the application required.
Unhealthy, risky and difficult maintenance
areas; Extreme temperature, explosive and
chemical aggressive zones; Intensive cycles
of work and exposure to severe weather condi-
tions, are just some of the elements to be kept
into consideration when designing a block or
specialspecial lifting accessory.
7/29/2019 Eld Brochure
9/10
Forged Lifting ComponentsForged Lifting Componentseither raw pieces or machined
ready to be assembled.
We can su pply up to Nr 250,We can supply up to Nr 250,in strength class P / T and Vin strength class P / T and Vrop forged Cross HeadsDrop forged Cross Heads
Shank m achin ing accordingShank machining accordingto customers drawing onto customers drawing ondemanddemand
Faithful compliance
with the most wide-
spread and reliable
norm, the DIN 15400.DIN 15400.
Large stocks of
DIN 15401 / 15402
Single and RamshornSingle and RamshornHooksHooks and DIN 1541SuspensionsSuspensionsare available.
Final surface treatment for
extreme applications andexplosive areas.
(paint, galvanic coating,
nickel-copper plating).
High performing SheavesSheaves inforged steel up to 500 mm
diameter. Possibility for special
treatment for increasing throat
hardness and high resistance
bearings.
Typical products destined to OEM
and to companies that are special-
ized in maintenance and after mar-
ket service
7/29/2019 Eld Brochure
10/10
E.L.D. EUROPEAN LIFTING DEVICES
Division of FEAT GROUP S.p.A.
Via Portoni, 205 - 21044 Cavaria con Premezzo (VA) - ITALY
Tel. +39 0331.73571 Fax +39 0331.219933
Sito Web: www featgroup com - e-mail: eld@featgroup com
The quality of the final product is strongly influenced by the skill of
the forger. Feat Group is historically recognized - from the most well
known brands as a reference supplier in the steel forming sector.
ELD guarantees the traceability of all
products through a marking code for
the forgings and ID tags for the hook
blocks.
Each code is linked to its owncertificate which is available (by
means of a password) in the web site
and recorded in our databases.
The conformity certificate contains data
relating to the manufacturing batch,
as well as the material chemical and
mechanical properties in compliance
with industry norms.
We can issue special inspection
certificates for additional controls, and
welcome external inspectors when
requested.
Technicians use modern Computer Aided Design, forging simulation software, and Finite Element Modeling.
www.targetadv.i
t
Our quality system imposes rigid production cycles and 100% visual inspection before packaging.
Destructive and non destructive tests and metallurgical analysis on forgings are carried out in the central lab of Feat.
ELD is internally equipped with dedicated machines for tests on the final product: Manufacturing Proof Test, 20,000 Cycle
Fatigue Test and Tensile Strength Test.
Once the hook reaches the breaking load limit it withstands a strong deformation but does not break.