EMC Unity - iSCSI Route Operations
This chapter contains the following sections:
• EMC Unity - Create iSCSI Route, on page 2• EMC Unity - Delete iSCSI Route, on page 3• EMC Unity - Modify iSCSI Route, on page 4
EMC Unity - iSCSI Route Operations1
EMC Unity - Create iSCSI RouteSummary
Create a new iSCSI route on an EMC Unity array.Description
This task creates an iSCSI Route on an EMCUnity storage array. iSCSI route is created on iSCSI Portal.Prefix length in case of IPv6, should be in range 1 to 128. Gateway input is not required for IPv6destination. Input Format:
• EMC Unity Account Name: podName@AccountName. For example: Vblock@Unity_Hybrid• EMC Unity iSCSI Portal:podName@AccountName@ipPortId@ipPortName@iqn@ipId@[email protected] example:Default Pod@Unity-136@SP A@spa@SP A I/O Module 0 Ethernet [email protected]:cx.apm00164209556.a4@[email protected]@if_7
• Destination: Valid IPv4 or IPv6 Address. Route Target node IP Address• Subnet Mask or Prefix Length: Valid IPv4 Address for IPv4 Address or a valid prefix Length forIPv6 Address.
• Gateway: Valid IPv4 Address
Inputs
MandatoryMappable To TypeDescriptionInput
YEMCUnityAccountIdentity
Select EMC Unity Account to create iSCSI Route
EMC Unity Account
YEMCUnityIscsiPortalIdentity
Select EMCUnity iSCSI Portal to createRoute
EMC Unity iSCSIPortal
Ygen_text_inputEnter the IP address of the target node ofthe route in IPv4/IPv6
Destination
Ygen_text_inputEnter the Subnet Mask if IPv4/PrefixLength within range [1-128] if IPv6 forRoute
Subnet Mask/PrefixLength
gen_text_inputEnter the IP address of the gatewayassociated with the route
Gateway
Outputs
TypeDescriptionOutput
EMCUnityAccountIdentityEMC Unity Account Identity.OUTPUT_EMC_UNITY_ACCOUNT_IDENTITY
EMCUnityIscsiRouteIdentityEMC Unity iSCSI RouteIdentity
OUTPUT_EMC_UNITY_ISCSI_ROUTE_IDENTITY
EMCUnityIscsiPortalIdentityEMC Unity iSCSI PortalIdentity
OUTPUT_EMC_UNITY_ISCSI_PORTAL_IDENTITY
EMC Unity - iSCSI Route Operations2
EMC Unity - iSCSI Route OperationsEMC Unity - Create iSCSI Route
EMC Unity - Delete iSCSI RouteSummary
Delete an iSCSI Route on an EMC Unity array.Description
This task deletes an iSCSI Route on an EMC Unity storage array. Delete EMC Unity iSCSI Route isalso the rollback task for Create EMC Unity iSCSI Route. Input Format:
• EMC Unity iSCSI Route:podName@AccountName@ipPortId@ipPortName@iqn@ipId@ipAdddress@[email protected] example: Default Pod@Unity-136@SP A@spa@SP A I/O Module 0 Ethernet [email protected]:cx.apm00164209556.a4@[email protected]@[email protected]@route_94
Inputs
MandatoryMappable To TypeDescriptionInput
YEMCUnityIscsiRouteIdentitySelect EMCUnity iSCSI Routeto delete
EMC Unity iSCSIRoute
Outputs
TypeDescriptionOutput
EMCUnityAccountIdentityEMC Unity Account Identity.OUTPUT_EMC_UNITY_ACCOUNT_IDENTITY
EMCUnityIscsiRouteIdentityEMC Unity iSCSI RouteIdentity
OUTPUT_EMC_UNITY_ISCSI_ROUTE_IDENTITY
EMCUnityIscsiPortalIdentityEMC Unity iSCSI PortalIdentity
OUTPUT_EMC_UNITY_ISCSI_PORTAL_IDENTITY
EMC Unity - iSCSI Route Operations3
EMC Unity - iSCSI Route OperationsEMC Unity - Delete iSCSI Route
EMC Unity - Modify iSCSI RouteSummary
Modify an iSCSI Route on an EMC Unity array.Description
This task modifies an existing iSCSI Route on an EMCUnity storage array. Prefix length in case of IPv6,should be in range 1 to 128. Gateway input is not required for IPv6 destination. Input Format:
• EMC Unity Account Name: podName@AccountName. For example: Vblock@Unity_Hybrid• EMC Unity iSCSI Route:podName@AccountName@ipPortId@ipPortName@iqn@ipId@ipAdddress@[email protected] example: Default Pod@Unity-136@SP A@spa@SP A I/O Module 0 Ethernet [email protected]:cx.apm00164209556.a4@[email protected]@[email protected]@route_94
• Destination: Valid IPv4 or IPv6 Address. Route Target node IP Address• Subnet Mask or Prefix Length: Valid IPv4 Address for IPv4 Address or a valid prefix Length forIPv6 Address.
• Gateway: Valid IPv4 Address
Inputs
MandatoryMappable To TypeDescriptionInput
YEMCUnityIscsiRouteIdentity
Select EMC Unity iSCSI RouteEMC Unity iSCSIPortal
gen_text_inputEnter the IP address of the target node ofthe route in IPv4/IPv6
Destination
gen_text_inputEnter the Subnet Mask if IPv4/PrefixLength within range [1-128] if IPv6 forRoute
Subnet Mask/PrefixLength
gen_text_inputEnter the IP address of the gatewayassociated with the route
Gateway
Outputs
TypeDescriptionOutput
EMCUnityAccountIdentityEMC Unity Account Identity.OUTPUT_EMC_UNITY_ACCOUNT_IDENTITY
EMCUnityIscsiRouteIdentityEMC Unity iSCSI RouteIdentity
OUTPUT_EMC_UNITY_ISCSI_ROUTE_IDENTITY
EMCUnityIscsiPortalIdentityEMC Unity iSCSI PortalIdentity
OUTPUT_EMC_UNITY_ISCSI_PORTAL_IDENTITY
EMC Unity - iSCSI Route Operations4
EMC Unity - iSCSI Route OperationsEMC Unity - Modify iSCSI Route