1
ESIC e-Tender enquiry form for the supply of
Medical / Surgical Instrumentse -Tender enquiry form (Free of cost)
Employees’ State Insurance
Corporation Medical College Hospital
SANATHNAGAR,
Hyderabad – 38 ISO
9001:2008 certified E-mail: [email protected], [email protected]
Phone No: 040-23701096, 23814852
LAST DATE OF SUBMISSION OF ONLINE e-TENDER Dt: 03-02-2020 at 2-30pm
2
ESIC MEDICAL COLLEGE & HOSPITAL
SANATH NAGAR, HYDERABAD-38.
E-mail: [email protected] ,
[email protected] Phone no.- 040-23701096, 23814852
Tender No: 799-U/16/19/SURGICAL INSTRUMENTS/2018-19 Dated: 14-01-2020
Sub: Invitation of e-Tender for the supply of Medical equipments
E-TENDER NOTICE No.28/2019-20
e-Tenders in Two bid system are invited from manufacturers / authorized dealers / distributors for the supply of
medical equipments for the department of General Surgery, Detailed information regarding the items, application /
tender forms, EMD details, specifications, terms and conditions can be downloaded from the following websites:
www.esic.nic.in
The interested bidders shall submit their tender(s) through online mode at the e-procurement portal
https://etenders.gov.in/eprocure/app
https://eprocure.gov.in/eprocure/app
All the bidders are requested to participate the tenders online through the website
https://etenders.gov.in/eprocure/app /EMD should be submitted by the bidder in the form of DD and the
same should reach this office before the closing time of the tender.
No need of submitting the hard copy of the bid.
Any corrigendum to this tender will be notified through the aforesaid websites only.
The undersigned reserves the right to accept or reject any or all the bids without assigning any reason at any stage.
The schedule for different activities is as below:
S.No. Description /Name of the Dept. Schedule
I E-Tender document available at ESIC website / e-
procurement portal
https://etenders.gov.in/eprocure/app
https://eprocure.gov.in/eprocure/app
14.01.2020, 14.30 onwards
II Last date and time for submission of completed Tender
forms through on-line& for the receipt of
EMD
04.02.2020 Till 14.30
III Date of pre bid conference(Offline) 21.01.2020, 14.30
IV Date and Time for Opening of Technical Bids 05.01.2020 14.30
V Estimated contract value(Rs) 1500000/-
VI EMD 30000/-
VII Performance Security 10% of contract value
VIII Validity of the bid 365 Days from the opening of the
bid
For any clarifications contact through mail id : [email protected]
If the date of opening of tender happens to be a holiday, the tender will be opened on the next working day.
For Dean
3
TENDER DOCUMENT
The Dean, ESIC Medical College, Hospital, Sanathnagar, Hyderabad, invites e-tenders from eligible and qualified Bidders for the supply of Medical equipments proposed to use for ESIC Medical College & Hospital, Sanathnagar, Hyderabad.
EMD
1. Bidder has to submit the Earnest Money Deposit (EMD) in the form of demand draft drawn in favor of “ESI saving Fund Account No. I” payable at Hyderabad, along with the Undertaking letter on 100 rupees non judicial stamp paper(Annexure II)
2. Separate EMD and Undertaking letter has to be submitted for each quoted item.
3. It is not mandatory for the bidder to quote all the items in the tender.
4. The EMD should reach this office through register post/courier/Speed post before the closing time of the tender
5. Please mention the tender enquiry number on the envelope and equipment name on the back side of the Demand draft.
6. All Tenders must be accompanied by EMD as mentioned above.
7. Bids without EMD and Undertaking letter shall be rejected.
4
EMPLOYEES’ STATE INSURANCE CORPORATION
MEDICAL COLLEGE & HOSPITAL
SANATH NAGAR,
HYDERABAD-38. [email protected]
Phone no.- 040-23701096, 23814852
Tender No: 799-U-16/19/ SURGICAL INSTRUMENTS /2018-19 Dated: 14-01-2020
Sub: Invitation of Tender for MEDICAL/SURGICAL INSTRUMENTS– Reg.
The Dean, ESIC Medical College & Hospital,
Sanathnagar,Hyderabad-38, invites e- tender in Double Bid system for
procurement of MEDICAL / SURGICAL INSTRUMENTS as per the
specifications enclosed.
Bidders are requested to submit the requisite information / documents
as per the following annexures:-
Annexure – I (Compulsory documents or check list) Annexure – II (Forwarding of tender documents) Annexure –III (Tender Terms and Conditions) Annexure – IV (Company Profile) Annexure – V (Declaration Form) Annexure – VI (Request for refund of EMD) Annexure – VII (LIST OF QUOTED ITEMS) Annexure – VIII (VIGILANCE DECLARATION FORM) Annexure – IX (Price Bid) Annexure – X (Specifications)
For DEAN
5
ANNEXURE – I
COMPULSORY DOCUMENTS (OR) CHECK LIST
A Compulsory documents for Technical Bid : S.No. Title Status
(Fill Yes or
No)
Page no.(all
documents
to be
serially
numbered
by the
bidder)
1. Have you enclosed EMD of required amount for the
quoted schedules?
Please mention value of EMD &Date of issue from
Bank.
2. Have you Submitted tender document downloaded
from ESIC website and signed & seal in all
pages?(BLANK TENDER DOCUMENT TO BE UPLOADED)
3. Have you submitted tender specific manufacturer’s
authorization
4. Have you submitted The certificate of incorporation/Firm Registration, if a
firm / Valid trade license if a trader.
5. PAN Number of the firm/Partner/ owner as the case
may be
6. GST Registration certificate.
7. Have you furnished IT return with Balance Sheet and
Profit & Loss Account for last three years prior to the
date of Tender opening?
8. Have you accepted all terms and conditions of tender
document?(ON COMPANY LETTER HEAD)
9. Purchase Order copies of last three years prior to
the date of Tender opening, in the bidders name for
the quoted items to Government Hospitals/reputed
institutions
10. Satisfactory Performance of last three years of
similar nature, supply of similar products to the
hospitals of central government/State
government/PSU/Autonomous Bodies/Local Bodies
etc.
11. Have you submitted the List of quoted items separately (Proforma given at annexure-VII)
12. Certificate that the quoted items have not been
supplied to any other organization/institution at a rate
lower than quoted here in last three months
13. Have you submitted the vigilance declaration
form (ANNEXURE VIII)
6
B. Compulsory documents for Price Bid: (Fill Yes or No) (or) check list
1 Price Bid for the quoting items (ANNEXURE IX)
2 Price Catalogue for all the quoted items
7
ANNEXURE - II
tender for the supply of MEDICAL/SURGICAL INSTRUMENTS
REQUIRED FOR USE IN ESIC MEDICAL COLLEGE & HOSPITAL, SANATHNAGAR,HYDERABAD
To
The Dean,
ESIC Medical College& Hospital, Sanathnagar, Hyderabad-38.
Sir,
Sub: Forwarding of Tender document for
MEDICAL/SURGICAL INSTRUMENTS for - Reg.
***
We have pleasure in submitting our tender for: MEDICAL/SURGICAL INSTRUMENTS We enclose herewith a Demand Draft No. Dt. for Rs.
Drawn in favour of the ESI saving Fund account No.-I, Payable at
Hyderabad towards Earnest Money Deposit.
We bind ourselves to the conditions prescribed in the Tender Notification.
We agree to have the Earnest Money forfeited in case of failure in full or part to
undertake the contract upon the acceptance of this tender.
OFFICE SEAL: SIGNATURE:
DESIGNATION:
8
ANNEXURE – III
TENDER TERMS AND CONDITIONS
1. Tenders will be opened at MS/DMS/I/c STORES Chamber at ESIC Medical College & Hospital, Sanathnagar, Hyderabad-38, on the stipulated date and time.
2. The two part bids i.e. Techno - commercial (Unpriced Bid) and Price bid prepared by the Bidder shall comprise of the following:
3. Techno - commercial Bid (Unpriced Bid) Bidders should submit the documents as per the checklist A mentioned in Annexure-I
4. Price Bid Bidders should submit the documents as per the checklist mentioned in Annexure-I
5. Rates should be typed in words as well as in figures, free from
erasing, cutting and Overwriting.
6. Price quoted should match with the items quoted in techno - commercial bid.
7. In case the price quoted cannot be matched with the items/quoted in
technical bid, the bid shall be liable to be rejected.
8. The quoted price should be all inclusive lump sum price offered for each
item including cost of the individual item and GST.
9. The rates quoted should be for ESIC Medical College Hospital, Sanathnagar, Hyderabad.
10. No other charges in addition will be payable on any account over and
above the lump sum price quoted in the price bid.
11. Only Techno - commercial bid (un-priced bid) will be opened first on the
date mentioned. The price bid of the firm who are technically viable
fulfilling the specifications and all other conditions alone, will be
considered for evaluation
12. If it is found at any stage that the goods as stated have been supplied at
a lower price, Then that price, with due allowance for elapsed time will
be applicable to the present case and the difference in cost would be
refunded by the supplier to the purchaser, if the contract has already
been concluded.
13. Tender currencies: The tenderer supplying goods shall quote only in Indian Rupees.
9
14. Bid Security (EMD) : Each tender must be accompanied by a EMD in the
form of Demand Draft only drawn in favour of ESI saving Fund account no.-I, payable at Hyderabad. The tenders not accompanied by EMD are liable for rejection. For EMD exemption, if any necessary documents for exemption should be submitted, otherwise tender will be liable for rejection. Advance Stamp Receipt for the refund of EMD should be enclosed with the tender document. The EMD of unsuccessful Tenderers shall be refunded after the award of tender to the successful tenderer. The Envelope Containing EMD Should Be Superscribed “EMD For Tender No…………….., Dt………… For “Supply Of …………………………..” Last
15. The manufacturers or their authorized distributor/stockist would be considered for the tender.
16. The contract should not be sublet without the prior written permission of the Dean/Medical Superintendent.
17. Either the authorized Indian agent on behalf of the principal/OEM or principal/OEM himself can bid but both cannot bid simultaneously for the same item/product in the same tender.
18. If an agent submits bid on behalf of the principal/OEM, the same agent shall not submit a bid on behalf of another principal/OEM in the same tender for same item/product.
19. Successful bidder shall not be entitled to any rate revision of price for any reason except That allowed by Government of India.
20. Copies of Purchase Order for having supplied the quoted item to Government Hospitals/reputed institutions should be enclosed. The rates quoted in the purchase order should not be deleted or made illegible. A certificate duly authenticated satisfactory performance should also be enclosed.
21. Tenderer should be able to provide demonstration of the product quoted by them, to the Technical Evaluation Committee in Sanathnagar, Hyderabad, within the stipulated period. The date for demonstration shall be fixed with mutual consent on telephone/e-mail and the same shall be confirmed in writing or by fax. In any case, not more than two weeks time shall be given to arrange for demonstration.
22. The bidders/manufacturer/OEM will get only one chance for demonstration. In case, the company fails to arrange the demonstration the tender shall be liable for cancellation.
10
23. The successful bidder should furnish Performance Security Deposit @
10% of the value of the contract.
24. The Dean ESIC Medical College & Hospital, Sanathnagar, Hyderabad will be at liberty to terminate the tender proceedings without assigning any reasons thereof. The bidder will not be entitled for any compensation whatsoever in respect of such termination.
25. No articles shall be supplied to the hospital except on requisition in writing signed by competent authority in writing to do so.
26. Bidders in their own interest shall ascertain the eligibility of whatsoever concessions and exemptions are eligible and applicable to the ESIC Medical College & Hospital, Sanathnagar, Hyderabad and shall advise the purchaser and quote accordingly.
27. Delivery Schedule: Within 04 weeks from the date of dispatch of supply order. The delivery should be at the place shown by the receiving officer within the premises of the ESIC Medical College & Hospital, Sanathnagar , Hyderabad at the cost of the supplier. If the successful tenderer fails to execute the supply within the stipulated period, Penalty of 2% of the value of the order will be levied per week or a part of week will be recovered subject to maximum of 10 percent . Failure to execute the supply will lead to cancellation of supply Order and the Performance security will stand forfeited. If the items are not supplied by Cancelled at the supplier’s risk and expenses. The additional expenditure if any, involved in procuring similar supplies from other sources shall, in that case is recoverable from the supplier from any amount payable or Security Deposit.
28. Part supply should be avoided as far as possible. In case of part supply of
any items mentioned in the supply order or either quantity/goods
requisitioned, the supplier shall mention specifically when the balance
will be supplied but supply all items so left out should be made, in any
case not later than 04 weeks from the date of despatch of P.O,
failing which the portion not supplied will be deemed to have been
cancelled, and shall be treated as failure to supply.
29. Bills for part supply shall not normally be admitted for payment. Bills
normally shall be preferred only after executing the supply order in full.
The items should be delivered at the Hospital Stores Department i.e.
Door Delivery at Supplier’s Cost, before 2.00 PM on all working days.
30. In case of failure of supply, the goods as per the supply order, the supply
11
order shall be placed either on the next lowest rate supplier/bidder or
any other sources available and difference of price will be recovered
from the supplier either from the Security deposit or from any sum
due to him.
31. The supplier shall attach the certificate of Quality testing of items while
supplying ESIC Medical College & Hospital, sanathnagar, Hyderabad.
Reserves the right to test any of the items supplied. All rejected items
shall be lifted by the supplier at his own cost. The supplier should
mention the brand name for the price they have quoted, to supply.
32. The supplier shall enter into a contractual agreement with the
purchaser and the cost incurred in this connection shall be borne by
the supplier.
33. Mode of Payment: The payment towards the supply is subject to receipt of inspection note/performance certificate to the effect that the items supplied are conforming to the supply order placed. Bills for the supplies should be submitted along with the supplies but in any case not later than 7 days from the date of supply. The stamped pre-receipted bill in triplicate in the name of Dean, ESIC Medical College & Hospital, sanathnagar, Hyderabad shall be submitted to the hospital along with a copy of the receipt showing delivery of goods ordered, obtained from him. Order No. & date shall appear in all correspondence, delivery challans and invoices. Bills shall be prepared in whole rupees i.e. (fraction of Rupee below 50 Ps. to be ignored and 50Ps. above be rounded to the next higher rupee).
34. Termination for Default: The purchaser may, without prejudice to any other remedy for breach of contract, terminate the Contract in whole or part by giving a written notice of default to the supplier, if the supplier fails to deliver within the period specified in the contract, or within any extension thereof granted by the purchaser.
In the event of the purchaser terminating the contract in whole or in part, the purchaser may procure upon such items and in such manner as it deems appropriate, the goods similar to those undelivered, and the supplier shall be liable to the purchaser for any excess costs for such similar goods. However the supplier shall continue the performance of the contract to the extend not terminated.
If the selected firm holder defaults in supply or makes part supply/non supply the items more than three times during the contract period the purchaser can terminate the contract and purchaser can also black list the supplier from the further participation in any ESI tenders.
35. Resolution of Disputes The purchaser and the supplier shall make every effort to
resolve amicably by direct informal negotiation, any disagreement or dispute arising between them under or in connection with the Contract.
12
If after 30 days from the commencement of such informal negotiations, the purchaser and the supplier have been unable to resolve amicably a contract dispute, either party may require that the dispute be referred for resolution in the formal mechanisms such as an arbitrator nominated by the Dean, ESIC Medical college & Hospital, sanathnagar, Hyderabad. The award of the arbitrator shall be final and binding on both parties of the contracts. The venue of the arbitration shall be such place as may be fixed by the arbitrator in his sole discretion. The Arbitration and conciliation act, 1996, the rules there under and any statutory modification or reenactments thereof shall apply to the arbitration proceeding.
36. Purchaser reserves the right to modify and/or relax any of the terms and conditions of the tender/contract.
37. This is a standard tender document, if anything not relevant to the tender may please be ignored.
38. If no tender with purchase order in the name of bidder is received, then those tenders with purchase orders in the name of manufacture or for same product to the GOVT hospital/institutions or reputed institutions will be considered in respect of S.No. 09 of the check list.
For DEAN
13
ANNEXURE – IV COMPANY PROFILE
1 Name of the firm
2. Full Address:
3Telegraphic Address/E-mail Id:
4. Telephone No.
5. Telex/Fax No.
6. Date of Establishment of firm:
7. Is Your Firm registered under
a. The Factories Act
b. Companies Act
c. Any other Act
8. Name & address of your Bankers. Stating the name in which the Account stands
(Please give Account details)
11. Are you on the list of approved? Contractors of any other authority (if so please give details)
12. Give details of any Govt. contract Executed during the last 12 months
13. Are you a Manufacturer? If so Please furnish the items you Manufacture
14. Are you a small scale industry? Registered with the appropriate Authority. If so furnish details
15. Are your products certified by ISI? If so furnish details
16. Any other information which you Consider necessary to furnish
DATE SIGNATURE:
NAME & ADDRESS:
14
ANNEXURE – V
DECLARATION FORM
We ………..having our office at ............................... do declare that we have carefully read all
the terms &conditions of Tender for the supply of ........................................ and abide by all the
conditions set forth therein by the Dean, ESIC Medical College &
Hospital, Sanathnagar , Hyderabad-38.
We further declare that we .………….possess valid licence bearing No…
................................................................................................................................................. vali
d
upto............
DATE:
SIGNATURE:
SEAL: NAME & ADDRESS:
15
ANNEXURE – VI From
To
The Dean,
ESIC Medical College & Hospital Sanathnagar , Hyderabad-38.
Sub: Request for refund of EMD Amount – reg. * * * With reference to your advertisement dated _, we have submitted tender for
(tender name)……………………………..
In case we are not the successful bidder, we request you to kindly refund the EMD amount of Rs. The Cheque may be kindly be drawn in favour of
Beneficiary’s Name :
Account No.
A/C Savings /Current :
IFSC Code No. :
Bank Name :
Branch Name & Address :
Yours faithfully,
(SIGNATURE & SEAL)
PRE- RECEIPT
Received an amount of Rs…………………………… vide cheque No.......................... dated .................. from ESI Corporation towards refund of EMD amount.
RevenueStamp (SIGNATURE & SEAL)
16
ANNEXURE – VII (LIST OF QUOTED ITEMS)
S.NO ITEM NAME BRAND/MAKE
Signature of Bidder with date and seal
17
ANNEXURE – VIII VIGILANCE DECLARATION FORM
We declare that no central vigilance case is pending or existing on our firm name.
DATE: SIGNATURE:
SEAL: NAME & ADDRESS
18
ANNEXURE – IX
Price bid for the supply of MEDICAL/SURGICAL
INSTRUMENTS
I/We hereby offer to supply
MEDICAL/SURGICAL INSTRUMENTS at Medical College &
Hospital, Sanathnagar, Hyderabad-38 as per the specifications in the
Tender, at the rate given below.
S. No.
Item Description Rate Per
Unit (Rs.)
Taxes, if Applicable (in
Rs.)
Total Amount (Rs.)
01
Buyer
Vendor
Vendor Rate Per Unit +
Taxes
* In case the taxes not specified, quoted rate considered as inclusive of taxes.
* The L1 will be selected by comparing the rates along with taxes.
Signature of Bidder with date and seal
19
ANNEXURE-X
LIST OF MEDICAL/SURGICAL INSTRUMENTS
S.No DEPT INSTRUMENT
NAME
SPECIFICATION/CO
NTAINS REQ
UIRE
D
QTY
1 Paediatrics OTOSCOPE WITH
HALOGEN BULB,
RECHARGEABLE -
BATTERY AND SIEGLE
ATTACHMENT
1. LONG LASTING,
DURABLE 3.5 V
DIAGNOSTIC
OTOSCOPE
2. HALOGEN BULB 3. 3.5
V
RECHARGEABLE
HANDLE
4. BATTERY
CHARGER
5. INSUFFLATOR BULB
WITH TIP 6. SPECULA
01No
2
Finger pulse oxymeter
1. Pulse Oxymeter, line
Powered:A mains
electricity (AC-
powered) photoelectric
device intended for the
continuous
transcutaneous
measurement and
display of haemoglobin
oxygen saturation
(SpO2). The signals,
typically produced
by light-
emitting diodes (LEDs)
and a receiving detector
in a probe,
or
directly built-in, are
used to
make the
measurements using the principle of
02
No.s
20
spectrophotomet ry. The
oximeter displays the
SpO2 values
and may
calculate /
display other parameters,
e.g., pulse rate,
electrocardiogra m (ECG).
The device is
typically used at the
bedside."
2. SpO2
measurement range at
least 40-70 and
70 to
99 %, minimum
gradation 1%
3. Accuracy of SpO2 better
than ± 1% for range 40-70
and better than ± 3% for
range 70-99.
4. Pulse rate range at least 30
to
240 bpm, minimum
gradation 1 bpm
5. Accuracy of pulse rate
better than ± 5 bpm
6. Signal strength or quality
to be visually displayed
7. Audiovisual alarms
required: high and low
SpO2 and pulse rate
(operator variable
settings), sensor
disconnected,se nsor
failure, low battery 8. Display type-
19
9. Memory-
Minimum 24hrs
trend memory
for Spo2&PR
10. User's interface-
Easily
accessible touch
button to
operate machine
11. Inbuilt Software
and/or standard
of
communication
12. Protective
splashproof case
for clean storage
and safe
transport
13. Display must
allow easy
viewing in all
ambient light
levels
14. Heat
Dissipiation:
Should maitain
nominal Temp
and the heat
should be
disbursed
through a
exhaust cooling
fan
15. power input and
frequency-220-
240v,50Hz
16. Power cable
length (meter)-
3mtr
17. Electrical
protection
provided by
fuses in both
live and neutral
supply lines.
18. "Operating
condition:Capab
le of operating
20
continuously in
ambient
temperature of 0
to 50 deg C and
relative
humidity of 15
to 90% in ideal
circumstances.
circumstances"
19. "STANDARDS
AND
SAFETY:Shoul
d be FDA / CE
approved
product ISO
80601-2-61-
2011: Medical
Electrical
equipment- part
2-61: Particular
requirements for
the basic safety
snd essential
performance of
pulse oxymeter.
Electrical safety
conforms to
standards for
electrical safety
IEC-60601-1,
EMC safety
confirms to IEC
60601-1-2
standard
requirement;
Manufacturer /
supplier should
have ISO 13485
certificate for
quality standard
Electrical safety
conforms to
standards for
electrical safety
IEC-60601-1
Shall meet IEC-
60601-1-2
(General
requirements for
21
safety -
electromagnetic
compatibility)
and IEC 60601-
2-25 (essential
performance of
electrocardiogra
phs
20. Warranty-3
years warranty
and one year
with free
servicing
21. Others: List of
important spare
parts and
accessories with
their part
number and
costing.
Certificate of
Callibration and
Inspection to be
provided.
3 TUNING FORK TO TEST HEARING 32-
10000 CAPS (SETS-128,256, 512,1024HZ)
A TUNING FORK IS
AN ACOUSTIC
RESONATOR IN THE
FORM OF A TWO
PRONGED FORK
WITH THE ROUND
BASE.
EACH SET SHOULD
CONSIST OF 128, 256,
512HZ
01
22
4 Table top baby weighing Machiine 1. Handling –
portable
2. Display type-
LED
3. REadaptability-
5gm
4. Capacity-20kg
5. Pan Size-
550mmX330m
m
6. Response Time-
3 Secs
7. Power
Required-90-
250V,50/60Hz,1
0Watt
8. Operating
Temp:10-
45degree
Celsius
9. Noi.Of
Displays:Single
10. Material of
Platform:Plastic
11. Shape of
Platform:Rectan
gular
12. Weighing
Machine
Dimensions-
300X400mm
13. Weight of
Weighing
machine:5Kg
14. Internal
Calibration-Yes
15. N.of Recording
features-Yes
16. No.of Scale
Divison:10000
17. Power
Requirement:ma
ins
operated/Battery
Operated
18. Battery Back
UP-Yes
19. Battery Back up
time-10hrs
01
23
20. Alarm
f
or overload
a
nd
malfunctionin
g- Yes
21. Model
approval
Certificate-
Yes
24
5 Digital Weighing Machine Weigh upto
100kg LED
Display Internal
Calibration
Automatic tare
provision
02No.
s
6 Height scale Stainless steel 01No
7 B.P Apparatus LED
Non Mercury
04No.
s
8 Digital B.P Apparatus 02No.
s
9 Ambu
Bags
500ml-2
635ml-2
04No.
s
10 Rebreathing Marks Small-01
Medium-
01
Stainless
steel
02No.
s
11 EyE O.T Calibri forceps Stainless steel 20
12 Hydro dissection cannula Stainless steel 50
13 Screw speculum Stainless steel 30
14 Harskins Stainless steel 30
15 Vannas straight|curved Stainless steel Stainless steel 20
16 Small artery forceps Stainless steel 10
17 Small scissors Stainless steel 10
18 Bialers Stainless steel 30
19 Towel clips Stainless steel 20
20 Conjunctival scissors Stainless steel 10
21 Surgery
O.T&Orth
o O.T
Dressing set Stainless steel 25
22 Suture removal set Stainless steel 10
23 Suturing set Stainless steel 04
24 Post Natal
Ward
Suction apparatus Stainless steel 10
25 Height scale Stainless steel 02
26 Chittle foreceps Stainless steel 06
27 Chittle forceps holder bottle Stainless steel 06
28 Kidney trays Stainless steel 10
25
29 Thumb forceps Stainless steel 20
30 Bowl small Stainless steel 20
31 Suture removal scissor Stainless steel 20
32 Plastic
Surgery
Double approximator without frame 11
mm,for veins (ABB-22V)
German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
33 Double approximator without frame 17mm
for veins (ABB-33V)
German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
34 Microvascular single clamp 11mm
for veins(B-2V)
German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
35 Microvascular single clamp
17mmfor veins(B-3V)
German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
36 Approximator for vessel size
1.5- 3.5mm(HD-D)
German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
37 Approximator foe vessel size 1.5-3.5mm
single
German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
38 Clamp applying forceps 14 cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High durability
02
39 HUMBY’s knife-skin grafting handle
complete,32 cm
German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
40 Operating
scissors,BL/BL,STRAIGHT,16cm
German Chrome
Steel.Corrosion
Resistant.High
Quality And High durability
02
41 Dissecting scissors BL/BL,curved,15cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
42 Dissecting scissors,fine,curved,18cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High durability
02
43 Scissors,Reynolds,curved,10.5cm German Chrome 02
26
Steel.Corrosion
Resistant.High Quality
And High durability
44 Iris scissors,SH/SH,curved,10.5 cm German Chrome
Steel.Corrosion
Resistant.High Quality
And High durability
02
45 Strabismus scissors ,BL/BL,straight,12cm German Chrome
Steel.Corrosion
Resistant.High Quality
And High durability
02
46 Tissue ndissecting scissors,fine,curved20cm German Chrome
Steel.Corrosion
Resistant.High Quality And High durability
02
47 Dressing foreceps ,medium
wide,curved,13cm
German Chrome
Steel.Corrosion
Resistant.High Quality
And High durability
02
48 Tissue forceps,adsons1x2t,12cm German Chrome
Steel.Corrosion
Resistant.High Quality
And High durability
04
49 Micro adsons foreceps 1x2t,12cm German Chrome
Steel.Corrosion
Resistant.High Quality And High durability
02
50 Micro mosquito foreceps,straight,12cm German Chrome
Steel.Corrosion
Resistant.High Quality
And High durability
06
51 Micro mosquito foreceps,curved,12cm German Chrome
Steel.Corrosion
Resistant.High Quality
And High durability
08
52 Hooklet, mimi-langenbeck,12x6mm,16 cm German Chrome
Steel.Corrosion
Resistant.High Quality And High durability
04
53 Retracter,kocher-lang25x6mm,21.5cm German Chrome
Steel.Corrosion
Resistant.High Quality
And High durability
04
54 Needle holder mayo-hegar,14-15cm German Chrome
Steel.Corrosion
Resistant.High Quality
And High durability
02
55 Needle holder,Webster,13cm German Chrome Steel.Corrosion
02
27
Resistant.High
Quality And High
durability
56 Needle holder,crilewood 15cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
57 Needleholder ,microvascular,18cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
58 Skin hooket,gills,no.1,18cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High durability
04
59 Skin hooket ,joseph,2-pair,7mm,16cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
60 NST-red-FCPS,straight,SH,0.3,17cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
61 Dissecting scissors,curved,18cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High durability
02
62 Disseting scissors,fine,curved,18cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
63 Scissors ,Reynolds,curved,15cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
64 Scissors,Reynolds,curved,15 cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
65 Dressing forceps,Waugh,20cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
66 Dissecting forceps ,adson,1x2T,15 cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High durability
02
67 Dissecting forceps ,semkem,1x2t,13cm German Chrome
Steel.Corrosion
Resistant.High
Quality
02
28
And High durability
68 Tying forceps ,w,platue,0.3mm,12cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
69 Suction tube ,3.0m,20cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
04
70 Suction tube ,3.0.20cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
04
71 Suction tube 4.0mm.20cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
04
72 Needle holder,de bakey,1.5mm,20 cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High durability
02
73 Needle holder,de bakey,20cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
74 Artery forceps ,de bakey,1.5mm,20cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
75 Caliper ,castrov-schach,curved.0-20mm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
76 Mouth gag,dingman,complete German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
77 Palatal rasparatary,curved,L4mm,14cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
78 Palatal rasparatory, curved.R4mm,14 cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High durability
02
79 Gracey curette1/2:yellow German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
32 9
80 Gracey curette3/4:yellow German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
81 Gracey curette5/6:yellow German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
82 Tenotomy scissorsBL/BL,straight,11cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
83 Tenotomy scissors BL/BL,curved,11cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
84 Retractor., kohler-lang55x11mm,22cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
04
85 Retracter.,kohler-lang80x13mm,22cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High durability
04
86 Woundspreader,alm,blunt,4x4t.,7cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
87 Woundspreader,ALM,sharp,2x3T.,11cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
88 Woundspreader,ALM,blunt,3x4.,13cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
89 Wire cutting and bending forceps,15cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
02
33
durability
90 Bone rongeur,borhler,curved15cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
91 Bone rongeur,jansen,S-shape,18cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
92 Bone cutting forceps,liston,curved20cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02 2
93 Dura hooked,graham,curved.,BL16cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
94 Coding label,MS1,W/O text,W/O hole German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
95 Micro scissors,straight sh/sh 12cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High durability
02
96 Micro scissors, straight., 0.3mm.11cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
97 Micro forceps,straight,0.3mm.11cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
98 Dilating
forceps,10degree,5x0.2mm,11cm
German Chrome
Steel.Corrosion
Resistant.High
Quality And High durability
02
34
99 Dilating
forceps,10degree,5x0.3mm,11cm
German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
100 Needle holder barraquer straight 10-
11cm
German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
101 Micro needle holder ,curved.,w/o lock
10-12 cm
German Chrome
Steel.Corrosion
Resistant.High
Quality And High durability
02
02 Micro needle holder ,straight.,w/o
lock 10- 12cm
German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
103 Artery forceps,De bakey, 1.5mm,16cm German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
104 Artery forceps ,De bakey,1.5mm,20cm German Chrome Steel.Corrosion
02
Resistant.High
Quality And High
durability
105 MESH TRAY German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
106 Microstop minimist container appox
300x180x100mm
German Chrome
Steel.Corrosion
Resistant.High
Quality And High
durability
02
107 Logistic frame, red Fcontainer German Chrome
Steel.Corrosion
Resistant.High
Quality And High durability
02
108 Orthopedi
c Ward
Surgical scissors Stainless steel 08
109 Artery forceps Medium Stainless steel 12
110 Artery forceps Small Stainless steel 06
35
111 Dissecting forceps toothed Stainless steel 12
112 Dissecting forceps non toothed Stainless steel 12
113 Needle holder Stainless steel 04
114 Clip removar Stainless steel 04
115 Torniquet Stainless steel 10
116 BP Handle size 11 Stainless steel 02
117 Needle destroyer Stainless steel 02