1
ETP Transmission AB
Power TransmissionRepresentatives
WoodworkingTooling mfg
Metal machiningSandvik Coromant
2
ETP Transmission Characteristics”Concentrated on fastening and centering products,
based on the hydraulic and hydro-mechanical principles”
Product development Manufacturing Market support
Own unique productsKey operationsQuality control
ETP-Representativeswith qualified engineers
and stock in > 20 countries
With customersand partners
Subcontractorsand partners
Training,application assistance,product documentation
and www.etp.se
19
ETP-CLASSICETP-EXPRESS ETP-TECHNO ETP-POWERPrice 1 1,3 3,5 2,3Torque 1 ~ same ~same ~sameRadial load "high" low medium "medium/high"Nbr of mount. > 100 > 1 000 > 5000 > 300Run out, mm ~ 0,04 ~ 0,02 ~ 0,006 0,03
75OD small smallest smaller "small"Tight. torque low medium "medium"Flange size small medium "medium"Min. temp. - 30 C - 30 C - 30 C 0 CMax. temp. + 85 C + 85 C + 110 C + 70 CSteel ball, No Yes Noextra sealHub tol. H7 same same sameShaft tol. h8 - k6 h8/k6 - h7 h8 h8/k6 - h7OD, ID, flange turned turned ground turnedside finishSpace neededaxially Yes No No No
Unbalance (gmm) dim. 40 55 66 59
23
ETP-EXPRESS® R and C
• 15 - 80 mm• 5/8” – 2”• type R material :Euronorm 1.4057X19CrNi17-2• option type C electroless Ni coated
37
ETP-HYDROPRESS®
• 160 - 300 mm• on request• specials
Quick and precise fastening for larger shafts