DEMOLITION ATTACHMENTS AND DUST CONTROL
The fully automated V12 dust control turbine from EMI
Controls offers a universal, powerful and environmentally
friendly solution to demolition site dust control. The V12
can eject atomised water up to 60 metres
The fully automated V12s dust control turbine from EMI
Controls is the first turbine to be offered on the market with
silent running turbine this turbine only emits 60dBA at 20
meters. Ideal for sites where you have to work with
particular attention to noise
Italmek IC range of dedicated steel shears from 1.5 to 70
Tonnes. All shears come standard with Kinshofer rotators
and Bosch Rexroth speed valves.
Handheld and system integrated dust and noise monitors.
These monitors have the ability to detect localised dust
and operate the turbines to reduce dust levels on site.
Italmek IF range of primary and secondary concrete
pulverisers, from 2 to 70 tonne. All pulverisers come
standard with Kinshofer rotators and Bosch-Rexroth speed
valves.
Italmek IDS range of demolition selector grabs. From 2 to 35
tonnes. All our range of grabs come standard with Kinshofer
rotators and single ram action clam shells
Eurobrit by European Attachments Group is our own brand
of consumables including Premium High Quality Shear
Blades, High carbon content Greases and Excavator Bolt-on
Track pads.
Dust Control
Emicontrols V12 dust control turbines
Central located water nozzles for high performance dust control
Up to 70 meters throw distance
Fully remote controlled for totally hands free use
Emicontrols V12 dust control turbines
Double boost pump, Wireless Remote, Automatic De-watering after each use, 3 pump settings
for maximum effectiveness of water atomisation. Turbine can run on as little as 15 L/min. High
performance fan producing linear water ejection pattern for pinpoint accuracy. 12 kW Fan
To hire any of our Emicontrol turbines call the sales team on 0845 4745670
Emicontrols V12s Super silent dust control turbines
V12s is the first 2-speed turbine with low noise technology on the market
1500rpm and 1000rpm settings give a max of 63dBA @ 20 meters.
Dedicated to environments where you have to work with particular attention to noise.
Dust Control
To hire any of our Emicontrol turbines call our sales team on 0845 4745670
Emicontrols V12s Super silent dust control turbines
The all new V12s turbine form Emicontrols has all the, innovative technology and linear water ejection
as its counterparts but it also has a new super silent turbine fan which allows 2 speed settings one of
1500rpm and 1000rpm. This new fan technology is allowing us to reduce noise emissions by over 50%
Dust Control
Emicontrols V7 dust control turbines
Central located water nozzles for high performance dust control
Up to 40 meters throw distance
Fully remote controlled for totally hands free use
Emicontrols V7 dust control turbines
Double boost pump, Wireless Remote, Automatic De-watering after each use, 3 pump settings
for maximum effectiveness of water atomisation. Turbine can run on as little as 15 L/min.
High performance fan producing linear water ejection pattern for pinpoint accuracy. 7kW Fan
To hire any of our Emicontrol turbines call our sales team on 0845 4745670
Dust Control
Casella M.A.M
Remote Boundary Monitoring of noise and dust
Fully Intergratable with our range of Emicontrol Dust control turbines
The M.A.M will detect and locate dust then operate the turbine to reduce dust immediately
Casella dust and noise monitoring systems
M.A.M unit for remote and boundary monitoring of dust, noise, wind speed and direction. The
first simultaneous multi parameter monitor for dust and noise manufactured in the UK.
The systems are fully Intergratable with our range of EMI Control Turbines V12 and V7
Dedicated Steel Shears
ITALMEK IC Dedicated Steel Shears
Full Chassis, Jaw and throat made from HARDOX
Low weight and innovative geometry give the shear high productivity and greater cutting forces
All shears are manufactured standard with Kinshofer rotators and Bosch Rexroth speed valves
ITALMEK IC Dedicated Steel Shears
All shears are built using only high quality Hardox steel throughout the whole chassis.
Shears from 15 Tonnes up are now supplied with blade on tip as standard.
All the IC Range are fitted with a Speed Booster System for powerful and quick cycle times.
Concrete Pulverisers
ITALMEK IF Concrete Pulverisers
Full Chassis, Jaw and throat made from HARDOX
All pulveriser from 16 tonnes are fitted with replaceable bolt on teeth
All pulverisers are manufactured standard with Kinshofer rotators and Bosch Rexroth speed valves
ITALMEK IF Concrete Pulverisers
All pulverisers are built using only high quality Hardox steel throughout the whole chassis.
The IF rotary pulveriser is ideal for primary and secondary demolition of reinforced concrete structures
The IF Range is fitted with a Speed Booster System for powerful and quick cycle times.
Demolition Grabs
ITALMEK IDS Demolition Grabs
Superb durability with Hardox throughout the whole chassis.
Double Sphere Rotator for effortless 360° rotation.
Reversible Cutting Edges for increased durability and wear
Premium High Quality Shear Blades
All standard shear blades available from our stock in Manchester most blades delivered in 48 Hours
All blades manufactured to exacting tolerances and in accordance with ISO9002
EAG hold one of the largest stock ranges of shear blades in the UK
If we don't have your blade design on the shelf we can manufacture within 48 hours
Highly efficient hardened blade edges for precise high output production
All blades manufactured here in the UK
High Performance Blades And Consumables
To check for stock availability please contact our sales team on
0845 4745670 or e-mail [email protected]
We now also stock a full range of BLS ‘TUFFPAD’ Excavator Track pad sets
And High Carbon Hammer Greases for Hammer and General Maintenance Use
European Attachment's Group have over 20 years experience in supplying
innovative solutions to the Demolition, Recycling, Construction and Utilities
markets. We have evolved rapidly over the last three years to a point now
where we can offer premium brand products with a service to match.
As part of our evolution we now hold a fleet of dust control turbines for hire
including the award winning V12 and V7 turbines. These can be hired from a
minimum of 1 week to set term contracts. Also new in 2013 is our range of
demolition shear blades, excavator track pads and high carbon EP2 hammer
greases.
For more information on our full product portfolio please contact
Call 0845 4745670
E-mail [email protected]
European Attachments Group Ltd, Saxon Works, South Street, Openshaw, Manchester M11 2FY
T: 0845 4745670 E:[email protected] www.europeanattachmentsgroup.com
Customers with our equipment: