Download - Excavator 7 Ton Class Application Chart - Slide Sledge · CASE CX75SR, CX80 CAT 307C, 308C CR DEERE 80C HITACHI Zaxis 80, ZX75US JCB JZ70 ... Excavator 7 Ton Class Application Chart

1. Wear Safety Equipment.2. Keep hands and feet clear.3. Beware of flying objects.

Prior to removing any pins or parts refer to Manufacturers Service manual for proper procedures for securing and stabilizing equipment.

MACHINE MODELSBOBCAT 442CASE CX75SR, CX80CAT 307C, 308C CRDEERE 80CHITACHI Zaxis 80, ZX75USJCB JZ70KOBELCO SK70SR, 80CSKOMATSU PC60-7B, PC75R-2, PC78US-6LINK-BELT 75SA

10

1

5 2

4 3

6

7

8

9

11

123456789

10

11

Bucket TeethBucket to Linkage PinBucket to Stick PinStick Linkage PinBucket Cylinder Rod End to LinkageBucket Cylinder PinStick Cylinder Rod End PinStick to Boom PinCylinder Pin to StickA. Boom to Frame (insert ONLY)B. Boom Cylinder Rod EndTrack Master Pin (Slip Pin)

See back for Pin Removal / Insertion specifications and recommended Slide Sledge® tool kit.

Excavator 7 Ton Class Application ChartOperating Weight: 15,000 - 17,000 lb.

10 A

B

The following removal and insertion tips are manufacturer recommendations for this model. Other model excavators may use similar tips and tools for similar removals. Consult with manufacturer for specific models and uses.

Removal and installation should only be performed on pins that have been properly serviced and maintained.

Tool/Tip Description#1

#2

#3

#4

#5

#6

#7

#8

#9

#10

#11

R/I ToolR/I TipR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipAccessory

9 lb./30" Slide Sledge1/2" Bucket Tooth Remover1/2" Bucket Tooth Inserter9 lb./30" Slide Sledge1 1/4" Pin Driver9 lb./30" Slide Sledge1 1/4" Pin Driver9 lb./30" Slide Sledge1 1/4" Pin Driver9 lb./30" Slide Sledge1 1/4" Pin Driver 9 lb./30" Slide Sledge1 1/4" Pin Driver9 lb./30" Slide Sledge1 1/4" Pin Driver9 lb./30" Slide Sledge1 1/4" Pin Driver9 lb./30" Slide Sledge1 1/4" Pin Driver9 lb./30" Slide Sledge1 1/4" Pin Driver9 lb./30" Slide Sledge7/8" Pin Driver5 lb. Handle Weight

Item

Recommended Tool Kit for 7 Ton Class ExcavatorsProduct Part#9 lb./36" Slide Sledge7/8" Pin Driver

211103213102213103213304213303213528211808

1 1/4" Pin Driver1/2" Bucket Tooth Remover1/2" Bucket Tooth InserterUtility Wedge Tip5 lb. Handle Weight

Part#211103213304213303211103213103211103213103211103213103211103213103211103213103211103213103211103213103211103213103211103213103211103213102211808

Excavator 7 Ton Class Application ChartOperating Weight: 15,000 - 17,000 lb.