+44 (0) 1429 867 388
© The Expanded Metal Company Limited 2018
exmeshsecurity.co.uk [email protected]
FastrackFencing
MESH MEASUREMENTS
0800 810 1182 [email protected] www.exmeshsecurity.co.uk
EXMESH Fastrack4095 Mesh
FENCING TECHNICAL SPECIFICATIONS
PanelsPanel Sizes (H x W) 1830 x 3050 mm 2440 x 3050 mm
Ground Clearance 25 mm 25 mm
Overlapping 50 mm 50 mm
Mesh 4095 4095
Open Area 81% 81%
Panel Weight (galvanised) 28.61 kg 38.15 kg
No. of Stringers 3 3
Coatings Hot Dipped Galvanised to BS EN 1461 as standard. Polyester power coatings are available in the RAL colour specifi cation range and is guaranteed in accordance with INTERPON D25/D525
FixingsType of Posts RHS 60 x 40 x 3 mm RHS 80 x 40 x 3 mm
Type of Fixings Carriage bolts and shear nuts Carriage bolts and shear nuts
Post Centres 3 m max 3 m max
Clamp Strip 1 off 40 x 5mm 1 off 40 x 5mm
How deep should posts be buried? 750 mm 750 mm
Foundation Sizes (concrete) L x W x D (guidance only)
250 x 250 x 850 mm 300 x 250 x 850 mm
Base PlateL x W x D
200 x 200 x 10 mm 250 x 250 x 10 mm
OtherConformity SBD (Secured by Design)
ExMesh Fastrack 4095.indd 1 09/09/2014 08:36
The ExMesh™ Fastrack system was developed in conjunction with the rail industry as a secure alternative to palisade or chain link fencing systems, and its robust construction means that it has a very long field life.
KEY FEATURES• Versatile design for use in a variety of applications• Simple to install and maintenance-free• Deters trespass and route crime• Suitable for sloping ground without stepping
Available in 4095, 4097, 2089 or 1576 Exmesh
101.6mm
50.8mm
4.5mm 3mm
4095
EX
MES
H
101.6mm
50.8mm
3.35mm 3mm
4097
EX
MES
H
38.1mm
16.93mm
4.75mm 3mm
1576
EX
MES
H
50.8mm
22.58mm
3.13mm3mm
2089
EX
MES
H
Open area: 72%
Open area: 82%
Open area: 44%
Open area: 87%
+44 (0) 1429 867 388
© The Expanded Metal Company Limited 2018
exmeshsecurity.co.uk [email protected]
Panel sizes (H x W) 1830 x 3000mm 2440 x 3000mm
Ground clearance 25mm 25mm
Overlapping 50mm 50mm
Coatings Hot dipped galvanised to BS EN 1461 as standard
Polyester power coatings are available in the RAL colour specification range and is guaranteed in accordance with INTERPON D25/D525
PANELS
Type of posts RHS 60 x 40 x 3mm RHS 80 x 40 x 3 mm
Type of fixings Carriage bolts and shear nuts Carriage bolts and shear nuts
Post centres 3m max 3m max
Clamp strip 1 off 40 x 5mm 1 off 40 x 5mm
How deep should posts be buried?
750mm 750mm
Foundation sizes (concrete) L x W x D
250 x 250 x 850mm 300 x 250 x 850mm
Baseplate sizesL x W x D
200 x 200 x 10mm 250 x 250 x 10mm
FIXINGS
Conformity SBD (Secured by Design) 2089 only
OTHER
FastrackFencing
Disclaimer: All finished product specifications and particulars including weights and dimensions stated are approximate only and should only be used for guidance. The Expanded Metal Company Ltd has the right to change the specifications at any time without notice.
+44 (0) 1429 867 388
© The Expanded Metal Company Limited 2018
exmeshsecurity.co.uk [email protected]
FastrackFencing
FENCE INSTALLATION
Ground level
Cus
tom
erre
quire
men
ts1.
8m /
2.4
m75
0mm
Extensions can be addedto any height of fenceif required (see note)
Each clamp strip boltedusing M8 carriagebolts and shear nut.- 4no bolts for 1.8m high- 5no bolts for 2.4m high
60x40x3 RHS for 1.8m high80x40x3 RHS for 2.4m high
40x5 flat clamp stripclamping mesh to post
Lugs welded to post toattach stringers, usinga square washer, completewith carriage bolt & nut
2465
mm
to to
p of
fenc
e (2
.4m
hig
h)18
55m
m to
top
of fe
nce
(1.8
m h
igh)
Soil flat welded tobottom of post
25mm ground clearance
3000mm post centres
Mesh overlaps post 50mmLatch clamps attach mesh to stringers(6no. per 3m stringer)
==
750m
m
ExMesh™ security products are manufactured by:
The Expanded Metal Company Limited PO Box 14 Longhill Industrial Estate Hartlepool TS25 1PR England
Tel: 0800 810 1182 Email: [email protected] www.exmesh.co.uk
FENCE INSTALLATION
E
Ground level
Elevation of standard fence panel
* * * * * **** * * **** * * * *
**
*** *
* *
Cus
tom
erre
quire
men
ts1.
8m /
2.4
m75
0mm
Extensions can be addedto any height of fenceif required (see note)
Each clamp strip boltedusing M8 carriagebolts and shear nut.- 4no bolts for 1.8m high- 5no bolts for 2.4m high
60x40x3 RHS for 1.8m high80x40x3 RHS for 2.4m high
40x5 flat clamp stripclamping mesh to post
Lugs welded to post toattach stringers, usinga square washer, completewith carriage bolt & nut
2465
to to
p of
fenc
e (2
.4m
hig
h)18
55 to
top
of fe
nce
(1.8
m h
igh)
Soil flat welded tobottom of post
25mm Ground clearence
3000mm post centres
Mesh overlaps post 50mmlatch clamps attach mesh to stringers(6no. per 3m stringer)
==
4095 mesh
750m
m
Fixings Posts
Quantity
1 x 5mm clamp strip (1830/2440mm long)
4 x M8 x 90 carriage bolts with shear nuts (for 1.8 system)
5 x M8 x 110 carriage bolts with shear nuts (for 2.4 system)
Stringer Assembly
Quantity
3 x Stringers (2920mm long)
18 x Latch clamps
18 x M8 x 25 cup square bolt & nut
Mesh Ref 4095
Elevation of single gate
Ground level
Slidinglatch
50x30x3 RHSlatch housing
Anti climb50x5 flat
Adjustablehinge
gatestile
Hinge post (sectiondepending on width
of gate leaves)
Section A - A
Section B - B
A A
B
B
75mm groundclearence
Width (inside of posts)Soil flat weldedto base of post
50x5 flat welded tohinge post, to protexthinges and prevent
climbing
Adjustable hinge toadjust gate leaves
99mmminimum gap
6mm gapapprox
50x50x3 SHSgate stiles
50x30x3 RHS horizontal &vetical bracing. Vertical bracingsplaced at 1200mm centres maximum
Mesh
Ground level
101.
6mm
5.03mm
3mm
4095mesh
50.8mm
2465
mm
(2.4
m h
igh
fenc
e)80
0mm
(2.4
m fe
nce)
Mesh weldedto front face
drop bolt detail(view from back of gate)
590
Drop bolt on back of gateleaf. See detail 'A'
Detail 'A'
Width (outside of posts)
DisclaimerAll finished product specifications and particulars including weights and dimensions stated are approximate only and should only be used for guidance. The Expanded Metal Company Ltd has the right to change the specifications at any time without notice.
Datasheet Version 2.0
ExMesh Fastrack 4095.indd 2 09/09/2014 08:36
ExMesh™ security products are manufactured by:
The Expanded Metal Company Limited PO Box 14 Longhill Industrial Estate Hartlepool TS25 1PR England
Tel: 0800 810 1182 Email: [email protected] www.exmesh.co.uk
FENCE INSTALLATION
E
Ground level
Elevation of standard fence panel
* * * * * **** * * **** * * * *
**
*** *
* *
Cus
tom
erre
quire
men
ts1.
8m /
2.4
m75
0mm
Extensions can be addedto any height of fenceif required (see note)
Each clamp strip boltedusing M8 carriagebolts and shear nut.- 4no bolts for 1.8m high- 5no bolts for 2.4m high
60x40x3 RHS for 1.8m high80x40x3 RHS for 2.4m high
40x5 flat clamp stripclamping mesh to post
Lugs welded to post toattach stringers, usinga square washer, completewith carriage bolt & nut
2465
to to
p of
fenc
e (2
.4m
hig
h)18
55 to
top
of fe
nce
(1.8
m h
igh)
Soil flat welded tobottom of post
25mm Ground clearence
3000mm post centres
Mesh overlaps post 50mmlatch clamps attach mesh to stringers(6no. per 3m stringer)
==
4095 mesh
750m
m
Fixings Posts
Quantity
1 x 5mm clamp strip (1830/2440mm long)
4 x M8 x 90 carriage bolts with shear nuts (for 1.8 system)
5 x M8 x 110 carriage bolts with shear nuts (for 2.4 system)
Stringer Assembly
Quantity
3 x Stringers (2920mm long)
18 x Latch clamps
18 x M8 x 25 cup square bolt & nut
Mesh Ref 4095
Elevation of single gate
Ground level
Slidinglatch
50x30x3 RHSlatch housing
Anti climb50x5 flat
Adjustablehinge
gatestile
Hinge post (sectiondepending on width
of gate leaves)
Section A - A
Section B - B
A A
B
B
75mm groundclearence
Width (inside of posts)Soil flat weldedto base of post
50x5 flat welded tohinge post, to protexthinges and prevent
climbing
Adjustable hinge toadjust gate leaves
99mmminimum gap
6mm gapapprox
50x50x3 SHSgate stiles
50x30x3 RHS horizontal &vetical bracing. Vertical bracingsplaced at 1200mm centres maximum
Mesh
Ground level
101.
6mm
5.03mm
3mm
4095mesh
50.8mm
2465
mm
(2.4
m h
igh
fenc
e)80
0mm
(2.4
m fe
nce)
Mesh weldedto front face
drop bolt detail(view from back of gate)
590
Drop bolt on back of gateleaf. See detail 'A'
Detail 'A'
Width (outside of posts)
DisclaimerAll finished product specifications and particulars including weights and dimensions stated are approximate only and should only be used for guidance. The Expanded Metal Company Ltd has the right to change the specifications at any time without notice.
Datasheet Version 2.0
ExMesh Fastrack 4095.indd 2 09/09/2014 08:36
FIXINGS/POSTS
QUANTITY1. 5mm clamp strip (1830/2440mm long)4. M8 x 90 security bolts with snap off nuts (for 1.8 system)5. M8 x 110 security bolts with snap off nuts (for 2.4 system)
STRINGER ASSEMBLY
QUANTITY3. Stringers (2930mm long)18. Latch clamps18. M8 x 25 cup square bolt & nut