1 Old panel 2 Unscrew 4 screwsaround panel frame 4 Notice the part number

on the Fanuc keysheetat the lower right corner and make sure the newreplacement panel is correct.

A98L-xxxx-xxxx#x

7 Picture of the rubberbacking included withour replacement panel5 Carefully peel off the old membrane keysheet. Remove

all the glue, otherwise the added bumpiness from the glue can affect installation.

10 Put the outer frameand replacement panel together 11Place frame and

replacement panel on top of the rubber backing.

Fasten the 4 screws on the panel frame.12 13 Enjoy the new panel.

3 Remove the panelframe

6 Keysheet membraneremoved. Notice thereare 4 locating pins.

8Carefully align the holeson the rubber backingwith the locating pins. Overlay the rubber backing.

9 Close up of locatingpin and the rubber backing.