8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
1/119
1
SAP® BUSINESSOBJECTS™ FINANCIAL
CONSOLIDATION 10.0, STARTER KIT FOR IFRS Operating Guide
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
2/119
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
3/119
3
Copyright © 2011 SAP AG. All rights reserved. SAP, R/3, SAP NetWeaver, Duet, PartnerEdge,ByDesign, SAP Business ByDesign, and other SAP products and services mentionedherein as well as their respective logos are trademarks or registered trademarks of SAP AGin Germany and other countries. Business Objects and the Business Objects logo,BusinessObjects, Crystal Reports, Crystal Decisions, Web Intelligence, Xcelsius, and otherBusiness Objects products and services mentioned herein as well as their respective logosare trademarks or registered trademarks of Business Objects S.A. in the United States andin other countries. Business Objects is an SAP company. All other product and service
names mentioned are the trademarks of their respective companies. Data contained in thisdocument serves informational purposes only. National product specifications may vary.These materials are subject to change without notice. These materials are provided by SAP
AG and its affiliated companies ("SAP Group") for informational purposes only, withoutrepresentation or warranty of any kind, and SAP Group shall not be liable for errors oromissions with respect to the materials. The only warranties for SAP Group products andservices are those that are set forth in the express warranty statements accompanyingsuch products and services, if any. Nothing herein should be construed as constituting anadditional warranty.
2011-03-01
Legal No part of this starter kit may be reproduced or transmitted in any form or for any purposeDisclaimer without the express permission of SAP AG. The information contained herein may be
changed without prior notice.Some software products marketed by SAP AG and its distributors contain proprietarysoftware components of other software vendors.The information in this starter kit is proprietary to SAP. No part of this starter kit‟s contentmay be reproduced, copied, or transmitted in any form or for any purpose without theexpress prior permission of SAP AG. This starter kit is not subject to your licenseagreement or any other agreement with SAP. This starter kit contains only intended content,and pre-customized elements of the SAP® product and is not intended to be binding uponSAP to any particular course of business, product strategy, and/or development. Pleasenote that this starter kit is subject to change and may be changed by SAP at any time
without notice. SAP assumes no responsibility for errors or omissions in this starter kit. SAPdoes not warrant the accuracy or completeness of the information, text, pre-configuredelements, or other items contained within this starter kit.SAP DOES NOT PROVIDE LEGAL, FINANCIAL OR ACCOUNTING ADVISE ORSERVICES. SAP WILL NOT BE RESPONSIBLE FOR ANY NONCOMPLIANCE OR
ADVERSE RESULTS AS A RESULT OF YOUR USE OR RELIANCE ON THE STARTERKIT.THIS STARTER KIT IS PROVIDED WITHOUT A WARRANTY OF ANY KIND, EITHEREXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIEDWARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ORNON-INFRINGEMENT.SAP SHALL HAVE NO LIABILITY FOR DAMAGES OF ANY KIND INCLUDING WITHOUTLIMITATION DIRECT, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES THAT
MAY RESULT FROM THE USE OF THIS STARTER KIT. THIS LIMITATION SHALL NOT APPLY IN CASES OF INTENT OR GROSS NEGLIGENCE.The statutory liability for personal injury and defective products (under German law) is notaffected. SAP has no control over the use of pre-customized elements contained in thisstarter kit and does not endorse your use of the starter kit nor provide any warrantywhatsoever relating to third-party use of the starter kit.
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
4/119
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
5/119
5
Contents
Chapter 1 Introduction ........................................................................................................................ 10
Presentation ......................................................................................................................... 10
Organization ................................................................................................................ 10
Other Documentation................................................................................................... 10
Database Structure .............................................................................................................. 10
Flow-Based Consolidation ................................................................................................... 11
List of Accounting Flows .............................................................................................. 12
Entering Data in Flows................................................................................................. 14
Balancing Flows........................................................................................................... 15
Chapter 2 Initializing the Consolidation ............................................................................................ 16
Section Objectives ....................................................................................................... 16
Key Points .................................................................................................................... 16
Suggested Approach ................................................................................................... 16
Documents to be kept .................................................................................................. 16
Updating Reporting Units ..................................................................................................... 16
Key Concepts .............................................................................................................. 16
Structure of the Reporting Unit Table .......................................................................... 17
Procedure .................................................................................................................... 17
Breakdown by Division ................................................................................................ 18
Creating Packages ............................................................................................................... 18
Creating a Reporting ID ............................................................................................... 19
Creating Reporting Sets .............................................................................................. 20
Sending Opening Packages ........................................................................................ 20
Entering and Updating Conversion Rates ........................................................................... 20
Conversion Rate Tables .............................................................................................. 20
Conversion Rate Types ............................................................................................... 21
Entering Conversion Rates .......................................................................................... 21
Chapter 3 Collecting Data ................................................................................................................... 23
Section Objectives ....................................................................................................... 23
Key Points .................................................................................................................... 23
Suggested Approach ................................................................................................... 23
Entering Data at Data Entry Site .......................................................................................... 23
Receiving Packages .................................................................................................... 23
Loading Data into Packages ........................................................................................ 24
Publishing Packages ................................................................................................... 24
Receiving, Checking and Integrating Packages .................................................................. 24
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
6/119
Contents
6
Receiving Packages .................................................................................................... 24
Running Package Controls .......................................................................................... 24
Integrating Packages ................................................................................................... 24
Sending a Given Package Several Times ................................................................... 24
Chapter 4 Consolidation Scope ......................................................................................................... 26
Section Objectives ....................................................................................................... 26
Key Points .................................................................................................................... 26
Suggested Approach ................................................................................................... 26
Documents to be kept .................................................................................................. 26
Concepts and Definitions ..................................................................................................... 26
Definitions .................................................................................................................... 26
Defining Scopes........................................................................................................... 28
Portfolios .............................................................................................................................. 29
Creating Portfolios and Portfolio Occurrences ............................................................ 29
Copying a Portfolio Occurrence ................................................................................... 30
Controls and Corrections ............................................................................................. 30
Printing a Portfolio Occurrence .................................................................................... 31
Scopes ................................................................................................................................. 32
Statutory and Reporting Scopes .................................................................................. 32
Creating a Scope ......................................................................................................... 32
Making Changes to a Statutory Scope Manually ........................................................ 32
Specific Cases ............................................................................................................. 33
Hierarchical Scope ....................................................................................................... 33
Printing a Scope .......................................................................................................... 33
Chapter 5 Processing the Data: Key concepts ................................................................................. 34
Section Objectives ....................................................................................................... 34
Key Points .................................................................................................................... 34
Suggested Approach ................................................................................................... 34
Introduction .......................................................................................................................... 35
Manual Journal Entries ........................................................................................................ 37
Procedure .................................................................................................................... 37
Defining a Journal Entry Header ................................................................................. 37
Audit IDs ...................................................................................................................... 38
Converting Data ................................................................................................................... 40
Main Principles ............................................................................................................ 40
YTD and Periodic Conversion ..................................................................................... 41
Consolidation Processing .................................................................................................... 42
Defining a Consolidation .............................................................................................. 42
Running a Consolidation Processing........................................................................... 42
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
7/119
Contents
7
Retrieving and Checking Data ............................................................................................. 43
Data Retrieval Reports ................................................................................................ 43
Checking Consolidated Data ....................................................................................... 43
Chapter 6 Making adjustments to individual accounts ................................................................... 46
Section Objectives ....................................................................................................... 46
Key Points .................................................................................................................... 46
Correcting Package Data ..................................................................................................... 46
Correcting Differences for Net Income N-1 ................................................................. 46
Recommended Solution: Package Processing ........................................................... 46
Other Package Corrections ......................................................................................... 50
Making Adjustments to Packages ........................................................................................ 51
Making Fair Value Adjustments ................................................................................... 51
Other Adjustments ....................................................................................................... 53
Making IFRS Adjustments ................................................................................................... 53
Chapter 7 Intercompany Transactions .............................................................................................. 56
Section Objectives ....................................................................................................... 56
Key Points .................................................................................................................... 56
Suggested Approach ................................................................................................... 56
Checking Intercompany Declarations .................................................................................. 56
Running Intercompany Reconciliations ....................................................................... 56
Correcting Differences ................................................................................................. 59
Elimination of Internal Transactions..................................................................................... 61
Elimination of Reciprocal Transactions ....................................................................... 61
Dividends ..................................................................................................................... 64
Provisions .................................................................................................................... 67
Gains or Losses on Internal Transfer of Assets .......................................................... 70
Chapter 8 Deferred Taxation .............................................................................................................. 75
Section Objectives ....................................................................................................... 75
Key Points .................................................................................................................... 75
Overview .............................................................................................................................. 75
Identifying the Bases of Deferred Tax ......................................................................... 75
Booking Deferred Tax .................................................................................................. 75
Accounting for Deferred Tax ........................................................................................ 76
Chapter 9 Consolidation Entries ........................................................................................................ 77
Section objectives ........................................................................................................ 77
Calculation of Non-controlling Interests ............................................................................... 78
Principles ..................................................................................................................... 78
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
8/119
Contents
8
Elimination of Investments ................................................................................................... 80
Principles ..................................................................................................................... 80
Converting Consolidated Shareholders' Equity and Investments in Subsidiaries ............... 85
Principles ..................................................................................................................... 85
Manual Journal Entries ................................................................................................ 85
Analysing the changes in the foreign currency exchange reserve for the Group ....... 89
Optional Conversion Process on Investment and Capital/Share Premium ................. 90
Equity Method ...................................................................................................................... 92
Principles ..................................................................................................................... 92
Booking of Goodwill ............................................................................................................. 96
Full and Proportionate Consolidation Methods ........................................................... 96
Goodwill for EM Entities .............................................................................................. 98
Chapter 10 Scope Changes .................................................................................................................. 99
Section Objectives ....................................................................................................... 99
Key Points .................................................................................................................... 99
Overview of the Scope Changes ......................................................................................... 99
Typology of Scope Changes ....................................................................................... 99
Scope Changes: Using the Right Flow ...................................................................... 100
Events Covered in this Documentation ..................................................................... 101
Incoming Entities ................................................................................................................ 101
Preparing the Reporting Cycle .................................................................................. 101
Automatic Processing ................................................................................................ 102
Manual Processing .................................................................................................... 103
Outgoing Entities ................................................................................................................ 104
Preparing the Reporting Cycle .................................................................................. 104
Automatic Processing ................................................................................................ 106
Manual Processing .................................................................................................... 107
Chapter 11 Completing the Consolidation ........................................................................................ 108
Section Objectives ..................................................................................................... 108
Key Points .................................................................................................................. 108
Checking the Statement of Comprehensive Income ......................................................... 108
Overview of the Statement of Comprehensive Income Reports ............................... 108
Calculation matrix ...................................................................................................... 109
Manual Journal Entries .............................................................................................. 110
Path between the Statement of Comprehensive Income and the Statement ofChanges in Equity ...................................................................................................... 110
Checking the Statement of Changes in Equity .................................................................. 111
Checks Specific to Certain Accounts ......................................................................... 111
Checking Variation Flows .......................................................................................... 111
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
9/119
Contents
9
Performing Detailed Checks for Reporting Units ....................................................... 113
Calculation matrix ...................................................................................................... 114
Checking the Statement of Cash Flows ............................................................................. 114
Overview of the Statement of Cash Flows Reports ................................................... 114
Analyzing Differences ................................................................................................ 115
Manual Journal Entries .............................................................................................. 117
Checking IFRS adoption .................................................................................................... 119
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
10/119
Introduction
10
Introduction
Presentation
Organization
The operating guide is organized according to the steps performed in a consolidation processing.
Preparing the reporting cycle: This step describes how the consolidation is initialized (seeInitializing the Consolidation on page 16), how package data is collected (see Collecting Data onpage 23) and how the Group structure is defined (see Consolidation Scope on page 26).
Processing the data: This step describes the main concepts (see Processing the Data: Key concepts on page 34), how intercompany transactions are eliminated (see Intercompany Transactions onpage 53), how deferred taxes are computed (see Deferred Taxation on page 75) and how
technical consolidated journal entries are posted (see Consolidation Entries on page 77).
Completing the consolidation: in this step the entire consolidation is validated on the basis of theStatement of Changes in Equity and the Cash Flow Statement (see Completing the Consolidation on page 108).
Each section presents:
Key points
A detailed approach with references to other sections for more information.
Other Documentation
The following documentation is available:
Product Documentation: This document, available in the application, describes functions andprocedures.
Configuration Design Documentation: This document offers in-depth knowledge aboutcustomizing the database structure.
You should refer to this documentation to get detailed information about:
using the application for operations and customization purposes.
making changes to the setup of the Starter kit.
Database Structure
All of the information in the database is identified by a set of elements required for storing, processing andretrieving data. These elements are called dimensions.
The following dimensions are used in the configuration:
Required dimensions
All of the data stored in the database must be identified by these dimensions.
CATEGORYThe configuration provides one category scenario, called A-Actual , to be used for statutoryconsolidations.
DATA ENTRY PERIOD: The date on which the information is entered for all of the defined
periods using the following format: YYYY.MM PERIOD: The same value as the data entry period in a statutory consolidation.
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
11/119
Introduction
11
REPORTING UNIT: The company or Business Unit whose data is being entered.
CURRENCY: The currency in which the data is stored.
ACCOUNT: The balance sheet and income statement accounts as well as technical accounts
for consolidation purposes, for example suspense accounts. FLOW (see Flow-Based Consolidation).
AUDIT ID: The ID that identif ies the origin of the data for packages, local adjustments,manual journal entries, and automatic journal entries.
Analysis dimensions
PARTNER: The reporting unit involved in an intercompany transaction.
MANAGEMENT UNIT: In-built dimension not used in the starter kit
PARTNER MANAGEMENT UNIT: In-built dimension not used in the starter kit.
SHARE: The held company in the investment portfolios.
COUNTRY: The breakdown of external sales by geographical area.
ANALYSISUsed to build the Statements of Cash Flows, Changes in equity, Comprehensive income. Alsoused for data entry on a daily basis for flows F20/F40 on Investment, F40 on Issuedcapital/Share premium and F06 on Dividends.
Note: These dimensions do not always contain values.
Dimensions specific to consolidation processing
SCOPE, VARIANT and CONSOLIDATION CURRENCY: These dimensions are used to identifya consolidation definition.
Technical dimensions
JOURNAL ENTRY NUMBER
LEDGER
ORIGINAL REPORTING UNIT
TECHNICAL ORIGIN
GEOGRAPHICAL ORIGIN
Note: Data for these dimensions is automatically loaded by the application.
Example
Reporting unit RU1 has € 5 000 in cash at the end of the 2009 fiscal year.This information, which originates from the data entry package, is stored as follows in the database:
CategoryData Entry
PeriodPeriod
Reporting
unitCurrency Account Flow Audit ID Amount
A 2009.12 2009.12 RU1 EUR A2610-Cash
on hand
F99-
Closing
PACK01-
Package Data5 000
For more information on the database structure, see the functional design documentation.
Flow-Based Consolidation
The flow dimension is used to identify and analyze the changes between the opening and closing balances.The accuracy of automatic processing depends on whether data has been correctly entered in flows. Flowsdiffer according to the account being analyzed.
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
12/119
Introduction
12
List of Accounting Flows
Types of Flow
Opening and closing balances correspond respectively to flows F00 and F99. Variation flows can beorganized into the following categories:
Flows for Current Transactions
Income statement
Transactions for the income statement are posted in flow Y99.
Debt management
Movements in debt management items, made up of current assets and liabilities (excluding provisions) andthe cash flow are posted in variation flow F15 .
Example
You want to enter an amount of 100 € excluding VAT from the sale of goods.
In company accounts:
Account Debit Credit
Sale of goods 100
Accounts receivables 100
In the application:
Account Flow Debit Credit
P1100 Revenues Y99 100
A2210 Trade receivables, Gross F15 100
Depreciation, impairment and provisions
The balance sheet movements due to depreciation, impairment and provisions are posted using thefollowing flows:
F25 - Increase in depreciation
F35 - Decrease in depreciation
Example
You want to enter a gross amount of 100 as allowances for provisions on shares.
In the accounting system:
Account Debit Credit
Depreciation on investment 100
Allowance/depreciation of investments 100
In the application:
Account Flow Debit Credit
A1812 Investments in subsidiaries, JV andassociates, Impair.
F25 100
P2210 Allowances for provisions on shares Y99 100
Equity
In equity accounts, shareholders' equity is processed separately from the other items.
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
13/119
Introduction
13
Movements in shareholders' equity usually originate from:
The distribution of dividends (posted in flow F06 )
The income of the current fiscal year (recorded in F10 )
The increase or decrease in capital (posted in F40 )
Movements that come under “Other comprehensive income”, for example, flow F55 on fair valuereserve
Other specific operations, like acquisition (flow F20 ) and disposal (flow F30) of treasury shares
Note: In the Equity section of the Balance sheet, there is no specific account for the Net profit of the period.This net profit must be included in account E1610-Retained earnings.
Non-current assets and liabilities
For the non-current assets and liabilities:
Increases are posted in F20 .
Decreases are posted in F30 .
Investments in subsidiaries and capital subscription (increase, decrease or creation of capital)are posted in F40 .
Example
You invest in the creation of Company F by subscribing 1 000 to its capital. During the year, you buy anassociate‟s share for 250. This investment is financed by a bank loan.
In the accounting system:
Account Debit Credit
Investments in subsidiaries 1 250
Bank loans 1 250
In the application:
Account Flow Debit Credit
A1810 Investments in subsidiaries, JV and associates F40 1 000
A1810 Investments in subsidiaries, JV and associates F20 250
L1510 Borrowings, Non current F20 1 250
Transfers between items
Transfers between balance sheet accounts are recorded in F50-Reclassification.
Adjustment to IFRS standards
Variations in fair value for financial assets and liabilities are posted in F55-Fair value.
Flows for Specific Transactions
The flows used for specific transactions are as follows:
Changes in accounting policies: The impact on balance sheet items is posted in F09-Change inaccounting policies, which must balance (Total Assets = Total Liabilities).
Contribution to capital and merger transactions: The impact on balance sheet items, includingissue of shares for capital contribution, is posted in F70-Internal mergers. Any impact on the netincome for the period is recorded in account P1620-Merger result .
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
14/119
Introduction
14
Flows Specific to Consolidated Accounts
The flows specific to consolidated accounts are generated automatically by the application and are asfollows:
Effect of foreign exchange rate variations: F80
Effect of variations in scope:
F01: Incoming units
F02: Change in consolidation method (old). This flow is used as the reverse opening flowfor reporting units that change their consolidation method, for example from the equitymethod to a full or proportionate consolidation or vice versa.
F03: Change in consolidation method (new). This flow is used as the incoming flow of thenew consolidation method.
F04: Change in consolidation rate. This flow records the impact of change in consolidationrate for subsidiaries consolidated using the proportionate or equity method.
F92: Change in interest rate. This flow corresponds to the impact of change in Group
financial interest on the equity.F98: Outgoing units
Entering Data in Flows
In Data Entry Packages
In the consolidation package, you must enter the closing balance in F99. Flow F15-Net variation is thenautomatically calculated by subtracting the sum of the opening flow and other movement flows from theclosing flow (F99).
Flow F15 is used as a control flow that should be analyzed using the relevant variation flows, for all thebalance sheet items except:
Cash accounts
Current assets/liabilities accounts, excluding depreciation, impairment and provisions, for which nodetailed analysis by flow, like increase/decrease, is required to build the Statement of cash flows.
Example
Company A has assets of up to 100 at closing, as compared to 50 at opening. After entering or importingdata, the assets variation table should be as follows:
ACCOUNTS CODE F00 F99F20
IncreaseF30
DecreaseF50
Reclass.Other
Control(F15)
Assets A11xx 50 100 50
Movements during the fiscal year correspond to an investment of 80 and a sale of 30. Data shouldtherefore be entered in the schedule as follows:
ACCOUNTS CODE F00 F99F20
IncreaseF30
DecreaseF50
Reclass.Other
Control(F15)
Assets A11xx 50 100 80 -30 0
In Journal Entries
Regardless of whether they are automatic or manual journal entries, they are automatically saved in amovement flow that carries over data to the closing balance of the balance sheet.
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
15/119
Introduction
15
Balancing Flows
Certain flows must be balanced for assets and liabilities/equity. Others must ensure that assets - liabilities =income.
Flow Assets –Liabilities =
Equity Assets - Liabilities = Income(income statement accounts)
F00 – Opening X
F01 – Incoming units X
F03 – Change in consolidation method (new) X
F09 – Change in accounting policies X
F50 – Reclassification X
F70 – Internal mergers X (P1620)
F80 – Currency translation adjustment X
F99 – Closing X
If these principles are not respected in manual journal entries, then cash flow statements maynot be balanced. Data retrieval reports are used to ensure that flows are balanced.
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
16/119
Initializing the Consolidation
16
Initializing the Consolidation
Section ObjectivesTo present all of the tasks required to run a new consolidation processing.
Key Points
To initialize a new consolidation processing, you should:
Update the list of companies and data entry sites
Create packages for the data entry period or send opening packages to the subsidiaries
Enter the conversion rate for the period
Before creating packages or sending packages to subsidiaries, you should add all of the Group's
incoming companies to the list of companies. You can manage the list of companies in the DimensionBuilder module of the Setup domain.
You can manage the opening packages to be sent to subsidiaries and opening balances, if required, in theReporting Organizer and RU Organizer modules of the Operation domain.
Conversion rates for the period can be entered before or after you send the packages to the subsidiaries.For the list of companies, however, you must update it first in order to determine exact ly whichcurrencies will be required for the consolidation.
Suggested Approach
1. Update the list of companies in the group and the list of data entry sites.
2. Create packages or send opening packages to subsidiaries.
3. Enter conversion rates for the period.
Documents to be kept
Printout of the conversion rate tables
Updating Reporting Units
The Reporting Unit is the elementary component of the Group‟s structure. Each Reporting Unit populates apackage.
In a statutory consolidation, a Reporting Unit is usually a legal entity, but it can also be a sub-group, abranch, a business unit, or a department.
Key Concepts
The reporting unit table contains all of the reporting units for which the Group has defined a code,regardless of whether or not they will be consolidated.
You can assign a code to companies that are not linked by their capital to the Group. You usually do soin the following cases:
When the Group is included in the consolidated accounts of another Group, even though itconsolidates data at its own level. By specifying a code for sister or parent companies, you
can manage all of the data required for the top level consolidation process (for example,investments and intercompany transactions).
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
17/119
Initializing the Consolidation
17
When the Group wants to perform breakdowns by partner (customers/suppliers) using consolidateddata.
The code TP-999-Third parties corresponds to all of the reporting units that do not have acode. You should never delete it.
Structure of the Reporting Unit Table
A certain amount of information for each Reporting Unit is stored in the database. This information includescharacteristics or sub-characteristics. This information is required because it enables the Reporting Unit tobe correctly included in the consolidation processing.
Currency
This identifies the currency in which data is collected.
Country
This indicates the country in which the Reporting Unit's headquarters are located. This characteristic isused to produce geographical area analysis.
Company
This is the legal entity to which the Reporting Unit belongs. A Reporting Unit may be its own legal entity.This information is required when the consolidation scope is being defined.
Several business units (BUs) may correspond to the split of one legal entity. In that case, all these BUs willhave the same Company (corresponding to the Head BU).
Purpose
This characteristic is used to distinguish between Legal entity, Business unit, Sub-consolidation, Archived,and Technical Reporting Units.
Division
When your consolidation definition is based on a hierarchical scope, the Division characteristic is used toeliminate intercompany transactions by distinguishing between inter/intra segment transactionsduring a consolidation processing.
Branch
This sub-characteristic identifies the branch for each Division. It is used to create a Reporting Unit hierarchythat can be used in the Scope Builder module.
The Division characteristic and Branch sub-characteristic share the same reference table.
Procedure
To add a Reporting Unit (Dimension Bu i lder module, Setup dom ain )
1. Expand the tree structure to display Data sources > Amounts > RU-Reporting unit. Check thatthe Load data mode is enabled.
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
18/119
Initializing the Consolidation
18
2. Select File > New.
In the General tab, enter the code, short description and long description you want to assign tothe new reporting unit.
In the Properties tab, enter the characteristics and properties for the new reporting unit.3. Translate the descriptions in the Translate tab.
If you do not translate the descriptions into other languages, then when subsidiariesopen the application in a language other than English, they will not be able to seethe descriptions of their partners when entering intercompany data.
4. Select File > Save.
5. Select File > Close.
Breakdown by Division
To ensure a correct breakdown by Division/Branch, you should:
Create new members in the Division/Branch list.
Select the Branch sub-characteristic for each of the divisions.
Select the Division characteristic in the Reporting unit table for each of the reporting units.
Note: The breakdown by division as proposed in the IFRS Starter kit is based on the following principle: 1 reporting unit = 1 division = 1 branch.
If your Group holds companies corresponding to multiple divisions, you have to split the legal entityor entities into several mono-division reporting units.
To create a new Division or Branch
1. In the Dimension Builder module of the Setup domain, expand the tree structure to displayReference tables > EN-DIVISION and check that the Load data mode is enabled.
2. Select File New.
In the General tab, enter the code, short description and long description you want to assign to thenew activity or branch.
3. For a new Division, enter the Branch sub-characteristic in the Properties tab.
4. Select File > Save.
5. Select File > Close.
Creating Packages
You create packages in three stages:
Create a reporting ID in the Reporting Organizer module of the Operation domain.
Define the list of reporting units included in the reporting ID in the RU Organizer module of theOperation domain and adapt these settings for some of the reporting units, if needed.
Generate the packages on the current site or send packages to another data entry site in the
RU Organizer module of the Operation domain.
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
19/119
Initializing the Consolidation
19
Creating a Reporting ID
A Reporting ID consists of:
A category, like a type of data to be processed. For example category A for statutory consolidations.
A data entry period, for example 2009.12 for the yearly consolidation on 31 December 2009.
A Reporting ID contains properties that are applied by default to all of the packages includedin it, except for changes made individually to the properties of certain Reporting sets (RU Organizer module).
In the IFRS Starter kit, the following options must be considered when creating a Reporting ID:
Category Scenario
The Starter Kit comes with one category scenario: A-Actual , version C-Current .
Data Entry Folders
In the IFRS Starter kit, two package formats are available:
P-A - Package for Actual
This package is used when entering data for entities consolidated using the Full or Proportionateconsolidation method.
P-E - Package for EM companies
This is a package dedicated to entities consolidated using the Equity method. The list of accounts toenter is much smaller, including only Equity accounts, Net Income for the period and Dividends paid.
In case an EM entity holds subsidiaries, it should be included in the group‟s consolidated financialstatements based on its own sub-consolidated accounts, according to IAS 28. For this reason, someconsolidation flows are available in the P-E package schedules.
Note: The same folders are available for data entry via both the Windows and Web interfaces.
Sets of Controls
Two sets of controls have been defined in the starter kit, and correspond to the package formats availablefor data entry.
Depending on which data entry folder you choose, you have to specify the corresponding set of controls (P- A or P-E).
Control Level
Two control levels can be applied to packages:
LEV1 – Balance Analysis is used to group together basic accounting controls, such as Assets – Liabilities = Equity. The controls checking the breakdown of Investments and Equity by flows alsocome under LEV1.
LEV2 – Flow Analysis is used to check that flow analyses are complete.
Origin of Opening Balances
We recommend that you use data from consolidated tables rather than preconsolidated tables (seeProcessing the Data: Key concepts on page 34) so that the data used for package opening balances isconsistent with data from the consolidated opening balances.
When several consolidations have been run using different variants, you can choose any variant for the
package opening balances, as long as the package data and corrections are identical for all variants.When initializing a consolidation for the first time, the "Opening balance data" option should be disabled.
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
20/119
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
21/119
Initializing the Consolidation
21
The rate versions enable you to specify different conversion rates for the same period and thereforesimulate different consolidations. You usually use this functionality:
To produce temporary accounts when the currency exchange rate is not yet known, for examplewhen publishing data in advance for intercompany transactions.
To run simulations using different currency scenarios.
In the Starter Kit, two conversion options are available, depending on whether you apply YTD or periodic(Monthly or Quarterly) exchange rates (this will be dealt with in detail in chapter YTD and PeriodicConversion on page 41). As a result, two rate versions are available by default: A-YTD and A-PER .
You can also create new conversion rate versions.
Conversion Rate Types
For a given rate version and period, the following conversion rate types are available:
ARPP - Average exchange rate, prior period
OR - Opening exchange rate, current period
AR - Average exchange rate, current period
CR - Closing exchange rate, current period
Daily-specific rates
The ARPP rate type is used only if you apply Monthly or Quarterly conversion (see YTD and PeriodicConversion on page 41).
Daily-specific rates were created to enable the conversion of paid dividend (F06) at the rate of distribution.Paid dividends are entered by beneficiary and date in the package and converted by default to the averagerate or at the rate of the day when entered (see Dividends page 64).
Daily rates also enable the conversion of F20/F40 on Investment and Issued capital/Share premium, basedon daily rates rather than the average rate for the period (see Optional Conversion Process on Investmentand Capital/Share Premium page 90).
A report checks the consistency between the analysis by date entered in the package and daily ratesentered in the conversion rate table.
The conversion rates entered are based on the base currency selected by users for each conversion ratetable. This currency has a conversion rate equal to one for all rate types.
The choice of this base currency is not related to the currency in which the consolidation is run.
Entering Conversion Rates
You can enter conversion rates in one of the following ways:
Enter the different rate types in the conversion rate table.
Import data from a file (see the product documentation).
Calculation Methods
Conversion rates can be expressed as follows:
Divide: The amounts entered are divided by the conversion rate for the "Certain for uncertain"
calculation method.
Multiply: The amounts entered are multiplied by the conversion rate for the "Uncertain for certain"calculation method.
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
22/119
Initializing the Consolidation
22
Example
The base currency is USD. Exchange rate for USD and EUR are entered as follows, depending on thecalculation method you choose:
Currency Divide Multiply
USD 1 1
EUR 0.67253 1.48692
Conversion Rates Specific to Certain Reporting Units
You can enter a conversion rate specific to one reporting unit. You use this option for incoming andoutgoing companies, for example the opening rate for an incoming reporting unit is the rate applicable atthe time it was included in the scope and not the rate applicable on the first day of the data entry period.This is explained in chapter Incoming Entities on page 101.
Daily Rates
To enter daily-specific rates for a given currency you should add columns in the right part of the conversionrate table. The list of additional rate types corresponds to the days of the year.
For example, if a particular consolidation event occurred on Sept 14th, first add the 09.14-September 14
rate type in the list of available columns, then enter the exchange rate for the relevant currencies at thisdate.
The exchange rate for the pivot currency must always be populated (with a value of 1) for any of thedate-specific rate types to ensure a correct conversion process.
Besides, if the consolidation currency differs from the pivot currency, you must also populate theexchange rates of the consolidation currency for any of the date-specific rate types.
In case you apply periodic conversion, enter daily-specific rates only for the dates included in the period(month or quarter).
For example, if you use quarterly conversion, the conversion rate table for Q3 should only include rates fordates from Jul 1
st to Sept 30
th. Indeed, if a consolidation event occurred in Q2 and you entered specific
exchange rates for the corresponding date in Q2 conversion rate table, the conversion for F20 or F40 hasalready been done in the consolidation for Q2 and should not be re-processed in Q3.
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
23/119
Collecting Data
23
Collecting Data
Section ObjectivesTo describe how package data is collected.
Key Points
At local data entry sites, data is loaded manually into consolidation packages by entering data , orautomatically by interfacing with the accounting system or by importing data tables.
After the data is entered or imported, controls must be run on packages, which are then published and sentto the consolidation department (in the case where data entry is decentralized).
In order for the package data to be included in the consolidation, packages must be integrated into thedatabase.
Suggested Approach
At data entry site:
1. Receive the opening package sent by the consolidation department (if applicable).
2. Enter or import data to the package.
3. Run controls on the package.
4. Publish the package so that its data is made available to the consolidation department.
At the consolidation department:
1. Receive the packages (if applicable).2. If there are no send conditions, check that the package sent has reached the control level required.
If this is not the case, then run controls and correct the errors.
3. Integrate package data into the database.
Entering Data at Data Entry Site
Receiving Packages
To receive packages, perform the following actions:
Define an inspection task so that it can detect the objects to be received. If objects are detected bythis task, then a new reception task RYYMMDD.000x will be automatically created.
Run the reception task.
This procedure only applies to the Windows client when the packages are filled out on a decentralized dataentry site. In any other case, the packages are directly available on the current site without performing anyadditional action.
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
24/119
Collecting Data
24
Loading Data into Packages
The procedure to enter or import data into a package and to run package controls is described in detail in
the Package Data Entry Guide.
Publishing Packages
After a package has been filled out, it must be published so that it will be available at the central level whenthe consolidation is processed.
When the data entry is done on a different site from the consolidation site, the publication of a packagecreates a “Send objects” task with the package.
There are several publication options. To learn more about them, refer to the application help.
Receiving, Checking and Integrating Packages
Receiving Packages
Just like at data entry sites, to receive packages, perform the following actions (see Receiving Packages onpage 23):
Define an inspection task so that it can detect the objects to be received. If objects are detected bythis task, then a new reception task RYYMMDD.000x will be automatically created.
Run the reception task.
Running Package Controls
If the "Blocking" option was checked when the packages were created or sent to the subsidiaries, then thecontrol level set must be reached before the subsidiaries can publish or send their packages back to you.
However, the send condition is not always required for a reporting process that is carried out for thefirst time or for incoming entities. For these two cases, you will, however, need to know the control levelreached by the package before integrating it. If the package does not comply with the control level set, you willalso need to rerun controls in order to obtain details on the errors.
Integrating Packages
This step is used to integrate packages automatically in the preconsolidated table that will be used when
the consolidation is processed. This step is mandatory for running the consolidation processing and mustbe performed:
Once you have received the package and checked that its data is correct.
When changes are made to a package which is then published again, if you want these changes tobe included in the consolidated accounts.
Sending a Given Package Several Times
A subsidiary may need to send its package several times to central site if it incrementally corrected orcompleted its package data.
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
25/119
Collecting Data
25
If the consolidation department wants to find out which changes were made to the accounting data ascompared to the previous version, it can display/print the following schedule for the relevant Reporting Unit:
Folder Book Schedule
C4 C41 C41-05 – Compare local/pre-consolidated data
An overall control report (not detailed by elementary accounts) can also be run for all the packages relatedto one Reporting ID:
Folder Book Schedule
C4 C41 C41-10 – Check integration by Reporting Unit
You should consult these schedules before integrating the new version of package data.
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
26/119
Consolidation Scope
26
Consolidation Scope
Section ObjectivesTo define the consolidation scope.
Key Points
The configuration proposes three ways to define your scope:
An automatic mode, where you first enter data in packages, and then generate the portfolio and thescope automatically.
A semi-automatic mode, where you first enter data in the portfolio manually, and then generate thescope automatically.
A manual mode, where you enter data in the scope manually or copy an existing scope.Before creating the consolidation scope, you should first have updated the list of companies in the Group(see Initializing the Consolidation on page 16). This is done in the Scope Builder module of the Operationdomain.
The Starter Kit offers segment reporting capabilities, based on hierarchical scopes.
Suggested Approach
1. Create a portfolio.
2. Load data in the portfolio in one of the following ways:
Initialize it using the data collected in the packages. (mode 1)
Enter data manually or copy an existing portfolio. (mode 2)
3. Create a scope.
4. Load data in the scope in one of the following ways:
Initialize it using the portfolio. (mode 1 and 2)
Enter data manually or copy an existing scope. (mode 3)
5. Define the hierarchy to be applied for Reporting Unit Rollup calculations
Documents to be kept
Printout of the portfolio Printout of the scope
Concepts and Definitions
Definitions
Portfolios
A portfolio consists of information about the direct legal investments between companies in the samecorporation. It:
stores the number of shares and voting rights owned by companies.
stores the number of shares and voting rights held by one company in another.
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
27/119
Consolidation Scope
27
uses shares and voting rights to calculate the direct investment, financial interest and ownershipinterest of one company in another (see Rates Used ).
Consolidation Scope
The scope shows the following for all of the companies included in it:
The consolidation method, like Not consolidated (NC), Full (FC), Proportionate consolidation (PC)and Equity method (EM).
The financial interest, ownership interest and consolidation rate.
Besides this data displayed at period closing, the application also displays the data from the previousperiod. This enables you to identify scope changes:
Incoming entities (I)
Outgoing entities (O)
No variation (N)
Segment Analyses
The segment reporting, especially the Revenue by segment, relies on the Reporting Unit Rollupfunctionality. It automatically calculates the inter-intra segment eliminations using the hierarchical scopeentered in the consolidation definition. Therefore, it is mandatory to define the unit hierarchy to be appliedin the Hierarchical scope step; otherwise, the reports dedicated to segment analyses will not retrieveconsistent data.
Rates Used
Direct Shareholding, Financial Interest and Ownership Interest
The portfolio refers to three types of rate:
Direct shareholding: This represents the percentage of shares a parent company holds in the heldcompany.
Financial interest: This represents the percentage of capital that a parent company holds directly orindirectly in the held company.
Ownership interest:
When one company holds another company directly, the ownership interest is the same as theshareholding percentage.
When one company holds another one via intermediate companies, the ownership interest iscalculated by adding together the direct shareholding percentages held by the companies inwhich there is an interest greater than 50% (because the default control threshold is 50%).
Example 1
60%
50%
50%
F2
F1
M
SubsidiaryParent
companyDirect
shareholdingFinancialinterest
Ownershipinterest
F1 M 60% 60% 60%
F2 M
F1
50%
50%
80% (1)
50%
100% (2)
50%
(1)Percentage of financial interest of M in F2 = 50% (direct) + 60% x 50% (indirect via F1) = 80%
(2)Percentage of ownership interest of M in F2 = 50% (direct) + 50% (indirect via F1, as morethan 50% of F1 is held)
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
28/119
Consolidation Scope
28
Example 2
20%
50%
50%
F2
F1
M
SubsidiaryParent
companyDirect
shareholdingFinancialinterest
Ownershipinterest
F1 M 20% 20% 20%F2 M
F1
50%
50%
60% (1)
50%
50% (2)
50%
(1) Percentage of financial interest of M in F2 = 50% (direct) + 20% x 50% (indirect via F1) = 60%
(2)The percentage of F1 in F2 is not taken into account because M's interest in F1 is less thanthe threshold.
Consolidation Rate
Besides the financial and ownership interests, scopes also display the consolidation rate. This ratedepends on the consolidation method:
For a fully consolidated company, it is 100%.
For a proportionate consolidation, it represents the share of assets and liabilities(or expenses and income) included in the Group balance sheet (or income statement). It is equalto the sum of all direct shareholdings in the subsidiary held by companies in the scope, after theconsolidation rates for the latter have been applied accordingly.
For a company consolidated using the equity method, it represents the Group share used tocalculate the consolidated value of the investments in associated undertakings. It is calculated in thesame way as in a proportionate consolidation.
Example
20%
80%
F2
F1
M
CompanyOwnership
interestConsolidation
methodFinancialinterest
Consolidationrate
F1 80% Full 80% 100% (1)
F2 20% Equity method 16% 20% (2)
(1)F1 fully consolidated so consolidation rate = 100%
(2)Consolidation rate for F2 = direct rate via F1 (20%) x F1 consolidation rate (100%) = 20%
Initial Values/Revised Values
The number of shares as well as the rates displayed in portfolios and scopes have two different values:
Initial value: This is the value calculated by the application using source data when initializing thefollowing automatically:
Portfolios (source data = preconsolidated data)
Scopes (source data = portfolio)
Revised value: You can enter this value manually in a scope or portfolio. If this value exists,then it will take priority over the initial value when applying rates in consolidation processing.
Defining Scopes
The configuration proposes three ways to define consolidation scopes in order to select which entities areto be consolidated, the consolidation method and rates to be used.
You must define the unit hierarchy to be applied, whichever way for defining scopes you choose.Otherwise, consolidations using a set of rules that includes a Reporting Unit Rollup rule cannot be
processed.
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
29/119
Consolidation Scope
29
Automatically
Portfolio is automatically generated by loading data entered in consolidation packages:
By the subsidiaries in schedule PA2600 : This schedule outlines the distribution of capital in number
of securities per shareholder (group and third party) after having entered the total amount of capital(account E1110 ) and the total number of shares (account XE1110 ).
By the shareholder in schedule PA2400 : This schedule analyzes the variation in investmentsecurities held, by number (account XA1810 ).
The direct shareholding rate is derived from the total number of capital shares declared by the subsidiaryand the number of shares held declared by the parent company or companies. The scope is thengenerated automatically using the portfolio.
This is the surest method because you can check that shares declared by subsidiaries and parentcompanies correspond, and because the rates for direct shareholding, financial interest, ownership interestand consolidation are calculated automatically.
Semi-AutomaticallyIn this method, you enter the portfolio manually and then generate the consolidation scope automatically.
This method is often used when the consolidation department wants to build the scope before havingreceived all the packages, assuming that legal data is available and up-to-date in the central database.
Manually
This method consists of loading data in the scope either by entering it manually, or by copying anexisting scope. This method is adopted when defining pro forma accounts, or when performing simulations.It does not, however, enable you to check the consistency of the data entered.
PortfoliosCreating Portfolios and Portfolio Occurrences
You manage portfolios in the Scope Builder module of the Operation domain. You enter datain a portfolio in two stages:
Create a portfolio with a code and description, and specify a number of settings for loading andcalculating rates. This is only mandatory when performing the reporting cycle for the first time.
Create a portfolio occurrence in order to enter data for a given data entry period.
Properties Tab
“Voting rights are proportionate to shares” Option
If you select the "Voting rights are proportionate to shares" option, then the number of shares that you enterare applied automatically to the number of voting rights, which are then used for calculating ownershipinterest.
Moreover, the fields displaying the number of voting rights are grayed out. You can only change this valueby changing the value for the number of shares.
Therefore, this option is:
to be deactivated when you initialize the portfolio with data entered in packages, which is therecommended method,
only advisable when portfolio is entered manually, in order to avoid a double keying.
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
30/119
Consolidation Scope
30
Other Parameters
The table below indicates the manner in which you should enter the other Properties tab‟s parameterswhen defining either a Portfolio or a Portfolio occurrence. These parameters are required only if you want toinitialize the portfolio using the data collected in the packages.
Parameter ValueOnly available for aportfolio occurrence
Reporting ID (Category) A – Actual
Reporting ID (Data entryperiod)
[Data entry period of theconsolidation]
X
Period [Same value as Data entry period] X
Flow F99 – Closing position
Non-group reporting unit TP-999 – Third parties
Audit ID filter AU1-S-R – Level S and R, i.e.
package origin
Initialization Tab
If you want to initialize the Portfolio occurrence using the information collected in the packages, theInitialization tab should be filled out as follows:
Parameter Value
For declaring
capital stock
Parent company SH - Share
Subsidiary RU – Reporting unit
Shares AC1-001 – Issued capital – Number of stocks
Voting rights AC1-001 – Issued capital – Number of stocks
For declaring
portfolio
Parent company RU – Reporting unit
Subsidiary SH - Share
Shares AC1-002 – Investment in subsidiaries, JV,
associates – Number of shares
Voting rights AC1-002 – Investment in subsidiaries, JV,
associates – Number of shares
Copying a Portfolio Occurrence
In the application, you can copy a list of investments from one portfolio occurrence to another, regardless ofthe other initialization settings.
Controls and Corrections
Controls of the Investment
Control reports are available in the software to check the consistency of portfolio data. The Control reportsavailable are the following:
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
31/119
Consolidation Scope
31
Investments Greater than 100%
This report displays errors coming from stockholdings greater than 100%, for instance, when the totalnumber of shares held is bigger than the share capital declared by the subsidiary or when the sum of directand indirect stockholding is greater than 100%. We recommend that you print this report using revised
data, which is used to generate consolidation scope from portfolio.
Missing Capital Stock
This report shows the list of reporting units that have not entered the number of shares included in theircapital, on the account used for the initialization of the investment.
Revised Data/Declarations
This report shows the discrepancies between a holding and its subsidiary on revised values. The subsidiaryenters in its data package the number of shares by shareholders. The holding enters the number of sharesit holds. This report reconciles these two declarations.
Note: The “Control for declarations” report also shows the reconciliation, but on initial values. We
recommend that you check the revised values, given that they are used for the initialization of theconsolidation scope.
Initial Data/Declarations Control
The discrepancies displayed in this report between the initial value of the shares and the declared sharesindicate that the pre-consolidated data (integrated data packages and manual journal entries) has beenmodified since the last initialization of the investment.
This report should be used only if the portfolio was initialized using the data collected in the packages.
Correcting ErrorsUse one of the following methods to correct errors:
Direct correction of the package data
It is the easiest way for correcting, but the following steps must strictly be performed:
1. Enter the corrections in the data package.
2. Control and save the data package.
3. Publish and integrate the package.
4. Re-initialize the investment in the portfolio occurrence. This step is critical.
When the dialog box “Do you want to save your changes” appears, click Yes if you want to
keep any manual modification you might have made within to the portfolio occurrence.
Manual correction of the investment
The major drawback of this solution is the fact that the corrections recorded in the investment will not becarried forward on the opening balance of the following year.
Printing a Portfolio Occurrence
You can customize the display of portfolio occurrence investments on screen or paper by adding, removingand sorting the columns displaying rates, number of shares and voting rights.
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
32/119
Consolidation Scope
32
Scopes
Statutory and Reporting Scopes
In the application, you can create two types of scope:
Statutory scopes: These scopes must be generated using a portfolio. They cannot be changed
without first changing the capital and investment rows in the portfolio.
Reporting scopes: These scopes can be created with or without a portfolio and all of their
data can be changed directly.
The consistency between the basic information (the number of shares and voting rights) and the rates inthe scope can only be guaranteed by using statutory scopes .
Creating a Scope
There are two ways of populating a scope, depending on whether or not you want to use a portfolio.
Setting up a Scope using a Portfolio
This can be done with a Statutory scope or a Reporting scope.
You can specify the settings for the opening scope. The application uses this information to identify theincoming and outgoing reporting units and the rate variations to be used in consolidation processing.
When using the built-in unit Rollup functionality, you must define the hierarchy of the Reporting Units in the„hierarchical scope‟ step.
Note: All reporting units belonging to the scope at opening and closing must be included in the hierarchy sothat the Rollup calculations can be performed.
Setting up a Scope without a Portfolio
This can only be done with a Reporting scope.
For each Reporting Unit, all the parameters (consolidation method, rates, and so on) can beentered/modified.
You must define the Reporting Unit hierarchy if you want to retrieve consistent segment analyses.
If needed, an opening scope can be specified.
Making Changes to a Statutory Scope Manually
Adding and Deleting Companies
It is possible to add a company to the scope. To do this, the modification must be done in the Investmentsstep of the scope. Then, in the Scope step, check the consolidation method and change it if needed.
The same method applies when you want to delete a company from the scope. In the Scope step, youneed to make sure the consolidation method is “Not consolidated (NC)”.
Changing the Consolidation Method
Consolidation methods are automatically assigned according to the ownership interest threshold defined inthe “Initialize using a portfolio” step in the scope editor.
If you select the “Full Consolidation” method, the consolidation rate will automatically be 100%. In the other
cases, for example for proportionate or equity methods, however, you must change the consolidation ratemanually to ensure that the consolidated accounts are valid.
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
33/119
Consolidation Scope
33
Financial Interest and Ownership Interest
In statutory scopes, you cannot change the financial and ownership interests directly. You should thereforechange the number of shares and voting rights in the Investments step.
Specific Cases
Incoming Companies
By default, the processing applied to incoming companies uses the financial interest and consolidation rateat closing. You can specify intermediate rates
(1)in order to process the incoming transaction in the incoming
flow and one subsequent operation (purchase or partial disposal) in a variation flow.
Outgoing Companies
In the application, you can manage Reporting Units:
leaving the scope at the start of the period
leaving the scope during the period
acquired, “merged”, at the start of the period
acquired, “merged” during the period
By default, an outgoing company is considered as leaving the consolidation at the beginning of the period.To manage the other three cases, select the Incoming/Outgoing tab, and enter the following parameters:
If the company is merged with another Reporting Unit in the Group, enter the code of this
reporting unit.
If the company is outgoing, “merged”, during the period, you can consolidate its income and
expenses until the effective outgoing date. To do this, enter the data entry period corresponding tothe package whose data you want to integrate.
Opening rates are applied by default to companies outgoing or acquired during the period. If you want touse different rates to calculate the non-controlling interests in the net income for the period, check the"Intermediate rate" option and enter these rates.
Hierarchical Scope
As mentioned before (see Segment Analyses on page 27), some of the segment analyses provided by theIFRS Starter Kit are based on Reporting Unit Rollup rules. Consequently, defining a hierarchical scope isrequired in order to retrieve consistent segment analysis data. The secondary hierarchy tab is not used inthe starter kit.
Printing a ScopeThe procedure is identical to the one described for printing a portfolio occurrence (see above).
(1) In the current version of Financial Consolidation, you cannot manage intermediate consolidation rates for companiesconsolidated using the proportionate method. Therefore, you should enter an intermediate consolidation rate that is equal to theconsolidation rate at closing.
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
34/119
Processing the Data: Key concepts
34
Processing the Data: Key concepts
Section ObjectivesThis chapter is the first section that describes how data is processed. It will provide a general overview ofthe transition made by package data as it is processed to produce the Group's consolidated accounts.
Key Points
The steps involved in processing package data in order to produce consolidated accounts are:
Integrate data from consolidation packages.
Enter manual journal entries.
Run the consolidation processing to:
Integrate package data according to the consolidation method and consolidation rate.
Convert amounts in foreign subsidiary accounts.
Generate automatic processing.
Each type of data is assigned with a different audit ID to facilitate the analysis of the transition from local toconsolidated figures. An audit ID is used to:
Provide an audit trail for the amount:
Data entered in packages is associated with audit ID PACK01 or local adjustment audit IDs
Data from automatic processing or manual journal entries is associated with other audit IDs
Indicate (in its long description) the purpose of non-package entries, for example PRO20-Elimination
of internal provisions - Auto.Besides the audit ID, each data is identified by its technical origin, which is used, for example, to distinguishbetween automatic processing, manual journal entries, opening balance data.
The following sections will present in greater detail how package data is processed automatically andmanually:
Adjustments to company accounts (see Making adjustments to individual accounts on page 46)
Checking and eliminating intercompany transactions (see Intercompany Transactions on page 53)
Posting consolidation journal entries (see Consolidation Entries on page 77)
Suggested Approach
Our approach for checking and analyzing data is closely linked to the methods used by the consolidationdepartment.
Regardless of the methods used, we recommend that you use reports available in the application (seeChecking Consolidated Data on page 43) to check that the consolidated accounts are generated correctlybefore ensuring that the data meets accounting requirements.
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
35/119
Processing the Data: Key concepts
35
Introduction
Before running a consolidation processing, there are two data sources available:
Package data, which corresponds to data entered in packages only, regardless of whether it wasentered in data entry schedules or posted by manual journal entry by the subsidiary.
Unlike consolidation data, package data is not identified by scope, variant or consolidation currency. Toconsult this data in the Report Navigator module, you should therefore run data retrieval reportswithout specifying any variable for the scope, variant and consolidation currency fields.
Preconsolidated data, which corresponds to:
Package data that is integrated in the central site's database. When you integrate package data,preconsolidated data is generated.
Data from manual journal entries posted in the Manual Journal Entries module.
Data from automatic journal entries produced by running preconsolidation rules, if these rules havebeen set up as an enhancement to the current configuration.
After running a consolidation processing, there are three levels of consolidated data for each consolidation:
Package amounts in the original data entry currency, corresponding to:
The previously defined preconsolidated amounts limited to the companies in the scope used inthe consolidation definition and to the manual journal entries posted using an audit ID taken intoaccount at the original currency level.
Certain automatic journal entries generated by running consolidation rules that are triggered atthe original currency level.
Automatic journal entries are generated by running a consolidation processing. Depending on
the purpose of the automatic journal entry, it may be generated at the local, converted orconsolidated level.
Converted amounts:
This includes all of the package amounts in the original data entry currency that are convertedusing the consolidation currency
The currency conversion is performed during the consolidation processing.The concepts underlying the currency conversion are described in chapter Converting Data onpage 40.
Additionally, this amount level includes the manual journal entries posted using an audit IDtaken into account at the converted level and automatic journal entries generated at
converted level.
Consolidated amounts:
This includes all of the data at the converted level after the consolidation rates are applied.
The consolidation rates are applied during consolidation processing.
This also includes the manual journal entries posted using an audit ID taken into account atconsolidated level and automatic journal entries generated at consolidated level.
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
36/119
Processing the Data: Key concepts
36
Each of the amount levels described above is stored in a separate data table. The relationship between thedifferent amount levels is seen in the following diagram:
Example:
Company A is held by the Group at 50% and consolidated using the proportionate method (consolidationrate = 50%) in scope P1 and fully consolidated in scope P2. Company A enters 100 CUR for Revenues(account: P1100 ). The average conversion rate for CUR is 0.08 for 1 EUR.
Retrieval of the data without scope/variant
Account Flow Package Preconsolidated
P1100 Y99 100 100
Retrieval of the data with scope/variant
Scope Variant Account Flow Original
Currency Converted Consolidated
S1 1 P1100 Y99 100 1 250 (=100/0.08) 625 (= 1 250 x 50%)
S2 1 P1100 Y99 100 1 250 (=100/0.08) 1 250 (= 1 250 x 100%)
Run consolidation processing 2(scope S2, variant 1)
Run consolidation processing 1(scope S1, variant 1)
PACKAGE AMOUNTS
Enter manual journalentries in the ManualJournal Entriesmodule
Applyconsolidation
rates
Convert toconsolidation
currency
PRECONSOLIDATED AMOUNTS
Enter datain consolidationpackages
Integrate packages
PACKAGE AMOUNTS(Original Currency)
CONVERTED AMOUNTS
CONSOLIDATED AMOUNTS
PACKAGE AMOUNTS(Original Currency)
CONVERTED AMOUNTS
CONSOLIDATED AMOUNTS
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
37/119
Processing the Data: Key concepts
37
Manual Journal Entries
Procedure
You manage manual journal entries in the Manual Journal Entries module of the Operation domain.
Manual journal entries are organized:
by reporting ID A reporting ID corresponds to a category and data entry period pair. In the configuration, thecategory is A.
by ledger within the reporting ID
Ledgers are created by the accountant depending on requirements and on the method usedto organize manual journal entries. You can, for example, have one ledger per type of journal
entry, (for example journal entries with the same audit ID, such as goodwill impairment, orcorrection of package data), or one ledger per reporting unit. You can also use one ledgeronly to group together all of the journal entries in the consolidation.
You define a ledger for:
A given environment (package and/or central manual journal entries)
A set of audit IDs
One or more categories
A journal entry can only be posted for one Reporting Unit and one audit ID.
Defining a Journal Entry Header
When you create a journal entry, the header fields should be filled out as follows
Compulsory fields:
Reporting Unit: Entity for which the journal entry is posted.
Audit ID.
Period: The default value is the current data entry period.
Journal entry currency: Currency in which the journal entry is posted. The default value is thedata entry currency. It can be changed except for certain audit IDs whose journal entriesmust be in the data entry currency.
Note: The Reporting currency field is grayed out and its value is the data entry currency, as
defined in the reporting unit table or as specified later in the reporting set.
Restrict values to be included:
Scope: This is used to restrict the journal entry to the specified scope. If there is no value inthis field, then the journal entry is taken into account for all scopes in which the company isconsolidated.
Variant: This is used to restrict the journal entry to the selected variant.
Consolidation currency: This is used to restrict the journal entry to consolidations using a
specific currency. When you select certain audit IDs that only accept the consolidationcurrency, then the value here is identical to the value of the journal entry currency.
Parent reporting unit: In this configuration, you should not select a value for this field.
8/9/2019 FC 10.0 Starter Kit for IFRS Operating Guide.pdf
38/119
Processing the Data: Key concepts
38
The controls run on manual journal entries are as follows:
Controls to check the global debit/credit balance when the journal entry is posted forba