Item number LEDsGO : 13-61103
WWW.LEDSGO.EU
page 1 of 4
23/05/2018
Technical Data
Features
unit unit
/ PCS
/ W
2θ1/2 W
type lm/M
M lm/W
IP VDC
/ A
/ ℃
℃
3000K [cm2/m]
year
Hr/
RaCRI ≥80
2700-3200K X=0.44 Y=0.403
Length 5
IP20
WW/NW/CW
Protectiondegree
Tape 3M VHB-4229P
Color
Epistar or equivalent
120
1+ 2oz copper / 12mm Wide
LED type
LED brand
Beam angle
PCB type
SMD 5050
Efficacy(typical)
Operating Voltage 24
20
Luminous flux(typical)
Strip power dissipation / m
350-400
16.8
LED power dissipation / m
LED quantity / m
12.6
60
Item DataDataItem
-20℃~ 60℃
0.7
Ta (ambient temperature)
Operating current / m
Warranty period 3
Lifetime 30000
Tc (surface temperature) Max. 67
Heatsink / m 504
★ Environmental friendly, no UV, no infrared, no radiation
★ Use high quality LED
★ 6 pcs LED / cutting section
★ High quality flexible PCB strip with ETL and CE certification.
★ Use 5050 SMD LED as light source with high brightness and large view angle
13-61103
R: 620-630nm (0,17A/m; 4,08W/m)G: 515-530nm (0,17A/m; 4,08W/m)B: 460-470nm (0,17A/m; 4,08W/m)W: (0,19A/m; 4,56W/m)
23/05/2018
Item number LEDsGO : 13-61103
WWW.LEDSGO.EU
page 2 of 4
23/05/2018
X,Y Chromacity co-ordinates
Layout
23/05/2018
Item number LEDsGO : 13-61103
WWW.LEDSGO.EU
page 3 of 4
23/05/2018
Connection Diagram
Outline Drawing
Controller
Wifi
Power
N L + + - -
23/05/2018
Item number LEDsGO : 13-61103
WWW.LEDSGO.EU
page 4 of 4
23/05/2018
※
※
★ The LEDs are not replaceable
★ The minimal bending radius :25mm, diameter=50mm
Power supply used has to be with suitable voltage and current.
On lighting up the strip, please use power supply with 20% more power rating than the strip's power consumption.
★ Do not cut the strip while connecting to the power supply.
★ Do not connect to power higher than the rated voltage.
★ Do not twist the strip
★ Do not pull the strip
convolved Bagging Sealed boxed
1. Use the tape ( model 3M VHB-4229P ) at the back of the strip for installation.
2. Take off liner of the tape ( model 3M VHB-4229P ) and stick the strip on surface of the object.
3. The strip can be cut to different length according to cutting section on the strip.
Take off the liner of the tape ( model 3M VHB-4229P ), stick the strip on surface of the object and fix the strip with mounting clips as below.-
Warning
Package 5m
Mounting
Notice