EDITION 2019
EquipmentFire Hydrant
BS EN 14384 : 2005Cert / LPCB ref. 1280Ga
EVERSAFECORPORATE PROFILE
(053162-V)EXTINGUISHER SDN. BHD.
About Us:1Eversafe Extinguisher Sdn. Bhd. incorporated in year 1979, a member of Leeden National Oxygen Ltd, Singapore. Our production of fire-fighting equipment is housed within 2.844 acres of manufacturing and R&D facilities which allows us to offer an extensive range of high-quality products and systems.
We aim to be the global leader in the production and marketing of firefighting equipment, systems, and solutions, through the use of innovative design.
Core Values3
Vision:2
Quality Control:4Manufacturing process and quality management systems have been approved to BS EN ISO 9001 by British Standards Institution.
Manufacturer/Distributor of:5
Portable and MobileFire ExtinguishersFire Hose ReelsLanding ValvesBreeching InletsHydrant
NozzleSmoke AlarmFire BlanketCanvas HoseCabinetsCO2 Fire Extinguishing System
NAF S227 Fire Extinguishing System(FM200 Alternative)NAF S125 Fire Extinguishing System
Kerr Fire Foam CompoundWet Chemical Fire Suppression System
Product Standards/Certification/Directives:6Our products are in compliance with the following product standards / certification bodies:
Australian Standard (SAI Global)European Standard (BSI)Malaysian Standard (SIRIM / IKRAM)Singapore Standard (TϋV SϋD PSB / SETSCO)Construction Product Directive, CPD / CPR (BRE)Pressure Equipment Directive, CE mark (Lloyd's Register)
Marine Equipment Directive, Wheel mark(Apragaz)Offshore Special Requirement -Sarawak Shell Bhd / Sarawak Shell Petroleum Co (SSB / SSPC)Kuwait National Petroleum Co (KNPC)Kuwait Oil Company (KOC)
a)b)c)d)e)f )
g)
h)
i)j)
PRODUCT APPROVALS
Quality First
Safety is Our Priority Provide Solutions Customer Focus
Positive ChangeIntegrity AlwaysTeamwork
1 In accordance to policy of continuous improvement, specifications are subject to change without notice.
:
Inert Gases Fire Extinguishing System
Screw Right Angle Landing Valve
InletOutletNominal Inlet Working PressureBody Test PressureSeat Test PressureBody MaterialHandwheel MaterialWeightPaint Finishing*Manufactured & Cer�fied to
Female Instantaneous to BS 336R 2 1⁄2” Screw Thread to EN 10226
Up to 15 bar
16.5 bar @ 2 min Copper Alloy to BS 1400
3.7 kg Grey Cast Iron / Aluminium Alloy
RAL 3000 Flame Red Epoxy Polyester Powder Coa�ng
22.5 bar @ 2 min
BS 5041 Part 1
VLRSModel
Screw Bib Nosed Pressure Regulating Landing Valve (E-Type)
InletOutletNominal Inlet Working PressureBody Test PressureSeat Test PressureBody MaterialHandwheel MaterialWeightPaint Finishing*Manufactured & Cer�fied to
Female Instantaneous to BS 336R 21⁄2” Screw Thread to EN 10226
Up to 20 bar
16.5 bar @ 2 min Copper Alloy to BS 1400
14 kg Grey Cast Iron / Aluminium Alloy
RAL 3000 Flame Red Epoxy Polyester Powder Coa�ng
22.5 bar @ 2 min
BS 5041 Part 1
RLOSModel
Screw Oblique Landing Valve
InletOutletNominal Inlet Working PressureBody Test PressureSeat Test PressureBody MaterialHandwheel MaterialWeightPaint Finishing*Manufactured & Cer�fied to
Female Instantaneous to BS 336R 2 1⁄2” Screw Thread to EN 10226
Up to 15 bar
16.5 bar @ 2 min Copper Alloy to BS 1400
4.2 kg Grey Cast Iron / Aluminium Alloy
RAL 3000 Flame Red Epoxy Polyester Powder Coa�ng
22.5 bar @ 2 min
BS 5041 Part 1
VLOSModel
In accordance to policy of continuous improvement, specifications are subject to change without notice. 2
Landing ValvesFire Hydrant Equipment
*Yellow finishing available upon request
*Yellow finishing available upon request
*Yellow finishing available upon request
Flanged Oblique Landing Valve
InletOutletNominal Inlet Working PressureBody Test PressureSeat Test PressureBody MaterialHandwheel MaterialWeightPaint Finishing*Manufactured & Cer�fied to
Female Instantaneous to BS 336DN 65 Flanged to EN1092-3 Table 16/21
Up to 15 bar
16.5 bar @ 2 min Copper Alloy to BS 1400
6.4 kg Grey Cast Iron / Aluminium Alloy
RAL 3000 Flame Red Epoxy Polyester Powder Coa�ng
22.5 bar @ 2 min
BS 5041 Part 1
VLOFModel
Flanged Right Angle Landing Valve
InletOutletNominal Inlet Working PressureBody Test PressureSeat Test PressureBody MaterialHandwheel MaterialWeightPaint Finishing*Manufactured & Cer�fied to
Female Instantaneous to BS 336DN 65 Flanged to EN1092-3 Table 16/21
Up to 15 bar
16.5 bar @ 2 minCopper Alloy to BS 1400
5.9 kg Grey Cast Iron / Aluminium Alloy
RAL 3000 Flame Red Epoxy Polyester Powder Coa�ng
22.5 bar @ 2 min
BS 5041 Part 1
VLRFModel
Flanged Bib Nosed Pressure Regulating Landing Valve (E-Type)
InletOutletNominal Inlet Working PressureBody Test PressureSeat Test PressureBody MaterialHandwheel MaterialWeightPaint Finishing*Manufactured & Cer�fied to
Female Instantaneous to BS 336DN 65 Flanged to EN1092-3 Table 16/21
Up to 20 bar
22 bar @ 2 minCopper Alloy to BS 1400
15.7 kg Grey Cast Iron / Aluminium Alloy
RAL 3000 Flame Red Epoxy Polyester Powder Coa�ng
30 bar @ 2 min
BS 5041 Part 1
RLOFModel
In accordance to policy of continuous improvement, specifications are subject to change without notice.3
Landing ValvesFire Hydrant Equipment
*Yellow finishing available upon request
*Yellow finishing available upon request
*Yellow finishing available upon request
4 Way Breeching Inlet
InletOutletPressure Ra�ng
Overall WeightBody MaterialCapPaint Finishing*
Test PressureOverall WidthOverall Height
Manufactured & Cer�fied to
Ø65 mm Male Copper Alloy Inst. Non Return Valve150 mm Flanged to EN 1092-2
Duc�le Iron / Cast Iron**Plas�c with chromed chained
BS 5041 Part 3RAL 3000 Flame Red Epoxy Polyester Powder Coa�ng
PN 16
285 mm20 bar
215 mm
BI 4
33 kg
Model
2 Way Breeching Inlet
InletOutletPressure Ra�ng
Overall WeightBody MaterialCapPaint Finishing*
Test PressureOverall WidthOverall Height
Manufactured & Cer�fied to
Ø65 mm Male Copper Alloy Inst. Non Return Valve100 mm Flanged to EN 1092-2
Duc�le Iron / Cast Iron**Plas�c with chromed chained
BS 5041 Part 3RAL 3000 Flame Red Epoxy Polyester Powder Coa�ng
PN 16
279 mm20 bar
215 mm
BI 2
17 kg
Model
In accordance to policy of continuous improvement, specifications are subject to change without notice. 4
Breeching Inlet & Cabinets Fire Hydrant Equipment
2 Way Breeching Cabinet
Body MaterialDimensionGlassPaint FinishingManufactured to
Model
595 mm x 364 mm x 295 mm1.2 mm Mild Steel Sheet
Clear GlassRAL 3000 Flame Red Epoxy Polyester Powder Coa�ng
BS 5401 Part 5
BC-2M
4 Way Breeching Cabinet
582 mm x 564 mm x 295 mm1.2 mm Mild Steel Sheet
Clear GlassRAL 3000 Flame Red Epoxy Polyester Powder Coa�ng
BS 5401 Part 5
BC-4MBody MaterialDimensionGlassPaint FinishingManufactured to
Model
*Yellow finishing avaliable upon request**Factory tested
*Yellow finishing avaliable upon request**Factory tested
In accordance to policy of continuous improvement, specifications are subject to change without notice.5
Fire HydrantsFire Hydrant Equipment
2 Way Fire Hydrant c/w Adaptor & Blank Cap
2 x 65 mm Male V Blank Cap & Chain100 mm Flanged to EN 1092-2 Table 9 Inlet
16 bar
RAL 3000 Flame Red Epoxy Polyester Powder Coa�ng
JKR 20200-0042-99
OutletWorking Pressure
24 barTest Pressure
Paint Finishing*Manufactured & Cer�fied to
Cast Iron** / Duc�le Iron to BS 27892000 L / min @ 1.7 bar
Copper Alloy to BS 1400
Overall FlowrateBody MaterialOutlet Material
PH2TModel
*Yellow finishing available upon request**Factory tested
2 Way Fire Hydrant c/w Landing Valve
2 x 65 mm Landing Valve With Female Inst. to BS 336 100 mm Flanged to EN 1092-2 Table 9 Inlet
16 bar
RAL 3000 Flame Red Epoxy Polyester Powder Coa�ng
JKR 20200-0042-99
OutletWorking Pressure
24 barTest Pressure
Paint Finishing*Manufactured & Cer�fied to
Cast Iron** / Duc�le Iron to BS 27892000 L / min @ 1.7 bar
Copper Alloy to BS 1400
Overall FlowrateBody MaterialOutlet Material
PH2QModel
*Yellow finishing available upon request**Factory tested
2 Way Fire Hydrant c/w Pressure Regulating Valve
2 x 65 mm Pressure Regula�ng ValveWith Female Inst. to BS 336
100 mm Flanged to EN 1092-2 Table 9 Inlet
20 bar
RAL 3000 Flame Red Epoxy Polyester Powder Coa�ng
JKR 20200-0042-99
Outlet
Working Pressure30 barTest Pressure
Paint Finishing*Manufactured & Cer�fied to
Cast Iron** / Duc�le Iron to BS 27892000 L / min @ 1.7 bar
Copper Alloy to BS 1400
Overall FlowrateBody MaterialOutlet Material
PH2RModel
*Yellow finishing available upon request**Factory tested
A
B
C
A
B
C
In accordance to policy of continuous improvement, specifications are subject to change without notice. 6
Dry Barrel Fire HydrantsFire Hydrant Equipment
Dry Barrel Hydrant Without Break System
DN 100 Flange DN 150 FlangeInlet
16 bar
≤ 10 min≤ 150 ml ≤ 200 ml
BS EN 14384, LPCB
OutletABDimensionC
Working Pressure
Time for DrainingRetained WaterManufactured & Cer�fied to
16 15Clockwise
207 mm395 mm
195 mm455 mm
800 mm 1200 mm 800 mm 1200 mm
Red Electrosta�c Powder Coa�ngBlack Bituminous Paint
Duc�le Iron
Closing Direc�onOpening TurnsUpper Barrel FinishingLower Barrel FinishingShell Material
EE16-082S EE16-083SModel
Two 2.5” BSP Hose Outlet and One 4“ BSP Pumper (add Coupling or Valves)
Dry Barrel Hydrant Without Break System c/w Instantaneous Hose Connector
DN 100 Flange DN 150 FlangeInlet
16 bar
≤ 10 min≤ 150 ml ≤ 200 ml
BS EN 14384, LPCB
OutletABDimensionC
Working Pressure
Time for DrainingRetained WaterManufactured & Cer�fied to
17 16.5Clockwise
225 mm403 mm
195 mm455 mm
800 mm 1200 mm 1450 mm 600 mm 1200 mm800 mm
Red Electrosta�c Powder Coa�ngBlack Bituminous Paint
Duc�le Iron
Closing Direc�onOpening TurnsUpper Barrel FinishingLower Barrel FinishingShell Material
EE16-082S EE16-083SModel
Two 2.5” BS 336 Hose Connectors and One 4“ BSP Pumper
BS EN 14384:2005Cert/LPCB ref.1280Ga
BS EN 14384:2005Cert/LPCB ref.1280Ga
In accordance to policy of continuous improvement, specifications are subject to change without notice.
Dry Barrel Pillar HydrantsFire Hydrant Equipment
7
Dry Barrel Hydrant With Break System
DN 100 Flange DN 150 FlangeInlet
16 bar
≤ 10 min≤ 150 ml
BS EN 14384, LPCB
OutletAB
DimensionCD
Working Pressure
Time for DrainingRetained WaterManufactured & Cer�fied to
11Clockwise
100 mm70 mm
413 mm563 mm 716 mm 943 mm
Red Electrosta�c Powder Coa�ngBlack Bituminous Paint
Duc�le Iron
Closing Direc�onOpening TurnsUpper Barrel FinishingLower Barrel FinishingShell Material
EE16-117S EE16-117TModel
Two 2.5” BSP Hose Outlets and One 4“ BSP Pumper (add Coupling or Valves)
A
B
C
D
A
B
C
D
Dry Barrel Hydrant With Break System c/w Instantaneous Hose Connector
DN 100 Flange DN 150 FlangeInlet
16 bar
≤ 10 min≤ 150 ml
BS EN 14384, LPCB
OutletAB
DimensionCD
Working Pressure
Time for DrainingRetained WaterManufactured & Cer�fied to
11Clockwise
100 mm70 mm
413 mm563 mm 716 mm 943 mm
Red Electrosta�c Powder Coa�ngBlack Bituminous Paint
Duc�le Iron
Closing Direc�onOpening TurnsUpper Barrel FinishingLower Barrel FinishingShell Material
EE16-117U EE16-117VModel
Two 2.5” BS 336 Hose Connector and One 4“ BSP Pumper
BS EN 14384:2005Cert/LPCB ref.1280Ga
BS EN 14384:2005Cert/LPCB ref.1280Ga
In accordance to policy of continuous improvement, specifications are subject to change without notice.
3 Way Pillar Hydrant & 4 Way Pillar HydrantFire Hydrant Equipment
Model PH4R
7-16 bar
65 mm Self Regula�ng Valve Flange to BS 5041 : 1
5” Female STORZ
Outlet
Outlet Pressure Se�ng (max) 7 bar for Each Outlet
16 barInlet Working Pressure (max)
Hydrant Working Pressure
24 barHydrant Test Pressure
5” Bu�erfly Valve PN16 to BS 4504Inlet*
Pumper Material Gun Metal
Galvanized / Sandblasted and Painted RAL 3000 Flame Red
Pumper Connec�on
Finishing
4 Way Pillar Hydrant c/w Pressure Regulating Valve
*Other connection available upon request
8
Inlet
Outlet
Working Pressure
Test Pressure
Finishing
Designed & Manufactured to
2 x 2 1⁄2” BSP and 1 x 4” BSP Threaded Connectors
Flange 150mm to Table 16/21 BS 4504 : 2
16 bar
24 bar
RAL 3000 Red Coa�ngFactory Tested
PH3TModel
3 Way Pillar Hydrant
In accordance to policy of continuous improvement, specifications are subject to change without notice.9
Hydrant AdaptorsFire Hydrant Equipment
BS Male Instantaneous With Male Screw Thread Hydrant Adaptor
Body Material
Head Size
Tail Size
Finishing
2 1⁄2” BS 336
Brass
2 1⁄2” NST 2 1⁄2” BSP2” BSP
Plain
ADH-MIMSModel
BS Male Instantaneous Hydrant Blank Cap
Body Material
Head Size
Finishing2 1⁄2” BS 3361 1⁄2” BS 336
Brass
Plain
CAH-MIModel
BS Male Instantaneous With Female Screw ThreadHydrant Adaptor
Body Material
Head Size
Tail Size
Finishing
2 1⁄2” BS 336
Brass
2 1⁄2” NST 2 1⁄2” BSP2” BSP
Plain
ADH-MIFSModel
BS Female Instantaneous & Female Screw Thread Hydrant Adaptor
Body Material
Size
Connec�on
Paint Finishing
2 1⁄2”
Aluminium Alloy
2” Female BS 336 Instantaneous Coupling and Female BSPT Screw Thread
RAL 3000 Flame Red Epoxy Polyester
ADH-FIFSModel
In accordance to policy of continuous improvement, specifications are subject to change without notice.
Hose Cradle & Hydrant CabinetFire Hydrant Equipment
10
Hydrant Equipment Cabinets (c/w Stand)
2 Coils of 2 1⁄2” x 30 m Hose and 2 units of Nozzles
560 mm x 1180 mm x 330 mm
0.9 mm Mild Steel Sheet 1.2 mm Mild Steel Sheet
Model
Body Material
Standard Capacity
Dimension (W x H x D)
Floor MountedInstalla�on
RAL 3000 Flame Red Epoxy Polyester Powder Coa�ngPaint Finishing
HC-01 HC-02
W
H
D
Hose Cradle
680mm ± 10mm
155mm ± 5mm
180° (le� to right)
680 mm x 155 mm x 180 mm
Aluminium Alloy and Steel
HCD-01
RAL 3000 Flame Red Epoxy Polyester Powder Coa�ng
Model
Body Material
Movement
Dimension (L x H x W)
Paint Finishing
In accordance to policy of continuous improvement, specifications are subject to change without notice.11
Lay Flat Fire HosesFire Hydrant Equipment
Lay Flat Canvas Fire Hose
65 mm38 mm
Instantaneous LA Coupling
White
14 bar42 bar31 bar
EPDMPolyester
10 bar14 bar42 bar
10 bar31 bar
SH10-38E SH14-38E SH10-65E SH14-65E DH21-38E DH21-65E SH15-38P SH15-52P SH15-38E SH15-52E
63 bar21 bar
38 mm
21 bar63 bar
PVC
65 mm
45 bar15 bar
38 mm
45 bar15 bar
52 mm
45 bar15 bar
38 mm
45 barEPDM
15 bar
52 mmDouble JacketSingle Jacket Single Jacket
20 m / 25 m / 30 m / 40 m
EN 14540 MEDNFPA 1961 UL Listed
50’ / 75’ / 100’SizeType
Standard LengthCouplingWorking PressureBurst PressureInner MaterialOuter MaterialColourManufactured & Certified to
Model
Note: Various hose length and coupling type available upon request
Type 1 & Type 3 Fire Hose
Instantaneous LA Coupling / GOST Coupling30 m
50 mm
T113-50
65 mm
T110-65 T113-65 T116-50 T116-65Model
65 mm 50 mm 65 mm
13 bar10 bar26 bar / 39 bar 16 bar / 32 bar 24 bar / 48 bar15 bar / 30 bar
16 bar
T316-65
65 mmSizeType Type 1 Type 3
CouplingStandard Length
Working PressureTest/Burst PressureColourMaterialManufactured to
Canvas RubberWhite Red
BS 6391
Note: Various hose length and coupling type available upon request
In accordance to policy of continuous improvement, specifications are subject to change without notice.
Fire Hose Rack Assembly & ComponentsFire Hydrant Equipment
12
Fire Hose Rack Assembly 1 ½” & 2 ½”
Automa�c
1½” Hose Rack Assemblyc/w Angle Valve
1½” Hose Rack Assemblyc/w Pressure Reducing Valve
2½” Hose Rack Assemblyc/w Angle Valve
2½” Hose Rack Assemblyc/w Pressure Reducing Valve
HRA-38-AV-JS HRA-38-RV-JS HRA-65-AV-JS HRA-65-RV-JS
1½” Polyester Single Jacket Rack Hosewith EPDM Lining and Filament Polyester Yarn
2½” Polyester Single Jacket Rack Hosewith EPDM Lining and Filament Polyester Yarn
ModelDescrip�on
Hose Release Mechanism
Fire Hose Type1½” Angle Hose Valve 1½” Pressure Reducing Valve 2½” Angle Hose Valve 2½” Pressure Reducing ValveHose Valve Type
1½” Portable Jet/Spray Nozzle 2½” Portable Jet/Spray Nozzle1½” x 100 � 2½” x 100 �
White200 psi600 psi
Nozzle TypeHose SizeHose ColourService PressureBurst Pressure
Fire Hose Rack Assembly 1 ½”
Note: UL/FM approved components
Fire Hose Rack Assembly 2 ½”
The Fire Hose Rack Assembly is used to provide immediate and e�cient water
source for �re suppression, and permits one-man operation. The assembly is for occupants use,
Class II service under NFPA 14 standard class of service. The pin rack features an automatic
release mechanism where water �ow through the hose after the last fold is released.
Lay Flat UL Fire Hose
38 mm 65 mm50’ / 75’ / 100’
Type Single JacketSizeStandard Length
NH Threaded Coupling200 psi600 psiEPDM
PolyesterWhite
CouplingWorking PressureBurst PressureInner MaterialOuter MaterialColour
NFPA 1961 UL ListedManufactured & Cer�fied to
SH14-38ET SH14-65ETModel
175 psiSize 2 ½”1 ½”Rated Adjustable Pressure
BrassUL 1468 ; UL/FM Listed
MaterialManufactured & Cer�fied to
PRHV-38 PRHV-65Model
Pressure Reducing Hose Valve
Size 2 ½”1 ½”200 psiPressure Ra�ng
20 - 200 psi
130 gpm 280 gpm
A & BUL 401
Service Pressure RangeDischarge Rate WideOpen @ 100 psiApplicable Fire ClassManufactured & Cer�fied to
PN-38JS PN-65JSModel
Portable Jet/Spray Nozzle UL
Automa�cSize 2 ½”1 ½”Mechanism
Mild SteelBody MaterialRAL 3000 Painted RedFinishing
HPR-38 HPR-65Model
Hose Pin Rack
Size 2 ½”1 ½”BrassBody Material
HN-38 HN-65Model
Hose Rack Nipple
In accordance to policy of continuous improvement, specifications are subject to change without notice.13
Fire Hose Rack Assembly & ComponentsFire Hydrant Equipment
300 psiSize 2 ½”1 ½”Rated Pressure
BrassUL 668 ; UL/FM Listed
MaterialManufactured & Cer�fied to
AHV-38 AHV-65Model
Angle Hose Valve
*FM approved Pressure Restricting Valve rated pressure 300 psi available upon request
Jet / Spray Diffuser Nozzle (Standard)
NaturalAluminium Alloy to BS 1490Body Material
Male Instantaneous BS 336FinishingInlet Size
500 L / min (Jet)Flow Rate @ 65 PSI590 L / min (Spray)
26 m (Jet)Throwrange @ 65 PSI15 m (Spray)
JSN-003-AL-SModel
In accordance to policy of continuous improvement, specifications are subject to change without notice. 14
Aluminium Jet NozzleFire Hydrant Equipment
Jet Nozzle Complete With Branchpipe
NaturalAluminium Alloy to BS 1490Body Material
Male Instantaneous BS 336FinishingInlet Size
210 L / min @ 12 mm DiameterFlow Rate @ 65 PSI510 L / min @ 19 mm Diameter
16 m @ 12 mm Diameter22 m @ 19 mm Diameter
Throwrange @ 65 PSI
JSN-001-ALModel
Jet / Spray Diffuser Nozzle Complete With Branchpipe
NaturalAluminium Alloy to BS 1490Body Material
Male Instantaneous BS 336FinishingInlet Size
500 L / min (Jet)Flow Rate @ 65 PSI590 L / min (Spray)
26 m (Jet)Throwrange @ 65 PSI15 m (Spray)
JSN-004-AL-S-BPModel
Jet / Spray Nozzle Complete With Control Valve
NaturalAluminium Alloy to BS 1490Body Material
2 1⁄2” BSP Male Instantaneous BS 336FinishingInlet Size
160 L / min (Jet)Flow Rate @ 65 PSI140 L / min (Spray)
14 m (Jet/Spray)Throwrange @ 65 PSI
JSN-007-AL-CV-065Model
Jet / Spray Nozzle Complete With Control Valve (Screw Thread)
NaturalAluminium Alloy to BS 1490Body Material
2” BSP Male ThreadFinishingInlet Size
160 L / min (Jet)Flow Rate @ 65 PSI140 L / min (Spray)
14 m (Jet/Spray)Throwrange @ 65 PSI
JSN-007-AL-CV-050Model
EVERSAFE® products are available in more than 45 countries worldwide
Our Global Network
+603 - 8024 9898 +603 - 8024 7878 / 9623 www.eversafe.net
[email protected] / [email protected] / [email protected]
www.facebook.com/eversafe.extinguisher
DO
C. :
CTL
-FH
E R
EV 0
2 D
ATE:
MAR
CH 2
019
Lot 878, Jalan Subang 9, Taman Perindustrian Subang, 47500 Subang Jaya, Selangor Darul Ehsan, Malaysia.