MODEL 204FLOOR TO FLOOR SLIDER BED
Titans’ Model 204 Floor to Floor slider bed adds flexibility to your manufacturing process by allowing you to utilize valuable floor space more effectively. The double nose over with bend rollers allows a smooth transition of the product from incline to horizontal thus protecting fragile products. The Model 204 uses a 4” diameter crown faced rubber lagged drive pulley with a rug-ged 4” deep formed 12 gauge box style frame. Adjustable “H” type supports or ceiling hanger brackets are furnished as standard equipment. A center drive and take-up can be added for reversing applications. The design of all Titan conveyors allows you to add components easily to achieve a completely integrated material handling system.
NOTE: Specifications subject to change without notice
MODEL 204 FLOOR TO FLOOR SLIDER BED CONVEYORStandard Options
Belt Widths 12”, 14”, 16”, 18”, 20”, 24”, 30”, 36” 4”, 6”, 8”, 10”Lengths 5’ min. to 40’ max. 3’ min to 50’ maxBelt Type Rubber rough top Gum rubberDrive 1/2 HP 230/460/3/60 3/4, 1, HP, 115/230/1/60, TEFC, wahsdown, severe
duty, inverter duty, brake motorDrive Pulley 4” dia. crowned, rubber laggedFrame 4” deep formed 12 ga.
OptionalH.P., drive location, speed, fixed or variable speed, controls, power feeder, belt type, center drive & take-up, transfer roll-ers, bolt-on end stop, belt scrapper, galvanized, stainless, siderails, supports, casters, other belt types, siderail skirting,
special paintMany other options available, consult factory representative
MODEL 204FLOOR TO FLOOR SLIDER BED
Lit Sheet 0619_ 204GH
735 Industrial Loop Road • New London, WI 54961-9612 920-982-6600 • Fax 920-982-7750 • Toll Free 800-558-3616
Website: www.titanconveyors.com • Email: [email protected]
CAT204 NEW
BMQ #813 - 13 3/16"BMQ #815 - 13 5/8"BMQ #818 - 12 7/8"BMQ #821 - 13 3/8"BMQ #824 - 14"Req'd Incline
15° to 30°
5 1/2"
Req'dInfeedHeight
36" Std.Power Feeder
BeltWidth4 1/4" 2 1/2"
18"12"
7 1/8"
BMQ #813 - 7 11/16"BMQ #815 - 8 1/8"BMQ #818 - 7 3/8"BMQ #821 - 7 7/8"BMQ #824 - 8 1/2"
32"
18"12"
Standard Center Drive& Take-up
BeltWidth
B.W. + 4"
4"
Standard FrameCross Section Standard Drive
Cross Section
4"
B.W.4 1/2" 3 5/16"
Standard CenterDrive & Take-upCross Section