INDUSTRY F340industrial dual extruder 3D printerwith interchangeable printing modules
3DGence Sp. z o. o.Przyszowice OfficeGraniczna 66, 44-178 PrzyszowicePoland
+48 32 438 98 65www.3dgence.com
SUPPORT
www.3dgence.com/support
+48 32 438 98 64
+48 600 959 [email protected]
TRAININGS
3D PRINTING SERVICES+48 519 381 731
www.faktoria3d.com
* Depend on the module; for up to date information check www.3dgence.com/support
SALES
+48 32 438 98 [email protected]
SALES
SPECIFICATION*
HEATED CHAMBERINTERCHANGEABLEMODULES
PEEK DEDICATED SUPPORTMATERIAL
Register your device at www.3dgence.com/support and get access to 3DGence Slicer, user manualand other materials.
Build volume (w×d×h)
Layer resolution (min)*
Printing nozzles
Nozzle diameter*
260 × 300 × 340 mm
0.04 mm
2
160°C
85°C
70°C
3DGence Slicer
–
Additional accessories – –
Table temperature (max)*
Chamber temperature (max)
Filament chamber temperature (max)
Software
Certification
stand
WEEE: DE 17684907
zasilacz UPS
MODULE PRO: ABS, PET, PA, PLA, ASA, PP, TPUMODULE HF: ABS, ASA, PA-CFMODULE HT: PC, PC-ABS, PC-ESD, PC-CFMODULE HTmax: PEEK
solublebreakaway
Support material type*
0.4/0.4 mm0.6/0.6 mm
Wall thickness (min)*
Filament diameter
Model material type*
0.4 mm
1.75 mm
SAFE WORKING ENVIRONMENT CONTROLLED PRINTINGCONDITION
DEDICATED SOFTWARE
SOLUTIONS FOR INDUSTRIAL
APPLICATIONSINTERCHANGEABLE
PRINTING MODULES
COST OPTIMIZATION
EASE OF SUPPORT REMOVAL
AEROSPACEAUTOMOTIVE MACHINERY INDUSTRY
WIDE RANGE OF MATERIALS
Take advantage of 3D printing technology in your business – INDUSTRY F340 is a 3D printer designed for professionals.
Print with materials which are beyond the reach of the competition. Create durable and high temperature resistant details made from PEEK, PC and ABS.
Reduce the cost of prints from technical materials. The use of dedicated support material allow cutting expenditure on filaments.
Create complex models with advanced geometry. Dedicated support material connected with 3DGence Slicer software guarantee easy support removal.
The modular system used in INDUSTRY F340 allows user to change the required module in no time.
EASE OF USE
Make your work easier with advanced solutions provided within the INDUSTRY F340 – the SMM system recognizes loaded material, weight and automatically feed’s it to the printing modules.
Work in controlled condition – air filtration system that is used in the printer stops dangerous particles and smells.
Create high quality and durable prints with actively heated chamber.
Prepare models for 3D printing in a quick and easy way with the use of intuitive 3DGence Slicer software.
PEEKbreakaway
support materialPLAsoluble
support material
FULL AUTOMATION
Don’t waste your time on printer calibration. Tensometric system automatically calibrate the printer. All modules are equipped with internal memory where calibration values are saved. New calibration values are loaded automatically upon module change.
HF
190°C–265°C 190°C–265°Ctemperature:
ABS, PET, PA,PLA, ASA, PP, TPU
model material:
HIPS (breakaway),
BVOH (water-soluble)
ESM-10 (soluble)
support material:
PRO HTmax
ABS, ASA, PA-CFmodel material:
HIPS (breakaway),ESM-10 (soluble)
support material:
265°C–340°Ctemperature:
PC, PC-ABS,PC-ESD, PC-CF
model material:
ABS (breakaway)
support material:
HT
temperature:
0.4 mmnozzle diameters:
0.6 mmnozzle diameters:
0.4 mmnozzle diameters:
340°C–500°C
PEEKmodel material:
dedicated breakaway,ESM-10 (soluble)
support material:
temperature:
0.4 mmnozzle diameters: