For CoralDraw X7 & X8
To disable color management select:
- Tools
- Color Management
- Default Settings
- Under Presets. Select Simulate Color Management Off
To enable color palettes select:
- Windows
- Dockers
- Color Palette Manager
Enable color palettes by double clicking on them.
To edit PDF settings select:
- File
- Publish to PDF
- PDF/X-3
Select:
- File
- Save As
- Change Format to PDF
- Make sure “selected only” check box is ticked off
To see if there is cut data in the saved file:
There must be an “A” displayed next to special items.
For CoralDraw X4, X5 & X6
To disable color management select:
- Tools
- Color Management
- Default Settings
Under Presets. Select Simulate Color Management Off
To enable color palettes select:
- Windows
- Dockers
- Color Palette Manager
Enable color palettes by double clicking on them.
To save as PDF Select:
- File
- Save As
- Change Format to PDF
- Make sure “selected only” check box is ticked off