l MAKERS OF BESPOKE KITCHEN AND BATHROOM FURNITURE l
F R A M E D & S T A N D A R D D O O R S
We produce a range of kitchen and wardrobe ready to paint doors. We offer a choice of styles from period favourites to the American Shaker style.
Doors are produced from high quality MDF in two thicknesses 18mm and 22mm.
New to our range are the fixed frame doors ready to fix to your existing kitchen units/wardrobes or to your new installation. The doors are shown primed ready for painting.
STANDARD DOORS
CHAMFERED SHAKER
VICTORIAN
CLASSIC
EDWARDIANGEORGIAN
COUNTRY
SHAKER
FRAMED DOORS
FLAT PANELGEORGIANEDWARDIAN
Chamfered Shaker Chamfered rail and flat panel
Shaker Flat rail and flat panel
Country Flat rail and grooved panel
Classic Fluted rail and panel
Edwardian Fluted rail and panel
Victorian Flat rail and panel with moulding
Georgian Fluted rail and panel
How To Order Our doors are made to measure and can be used to replace your existing kitchen or wardrobe doors or for new installations. You will need to read our technical information to enable you to order the correct sizes. If you are replacing existing doors simply measure your old ones.
You will need to list all doors on the order form, giving height x width and style. To cost the doors take the nearest size above the size you require from the prices, remembering to select the correct price banding. Fill in the quantity in the box provided with the total for each size as the example.
Any accessories that are required can be added beneath the doors e.g. cornice, light pelmet, end panels, plinth, skirting etc.
If you require your doors and accessories to be given a coat primer simply add 20% to the total cost. Add any hinges and hinge drillings to your list and then calculate the delivery cost.
Please enclose your cheque or credit card details for total price and send to us at our address on the order form.
Our fixed frame doors are ordered using the fixed frame order form. Details of the required dimensions are included in the fixed frame doors technical information. All boxes on the order form require filling in to enable us to make your doors.
As with the standard doors simply add any accessories to your list of fixed frame doors and priming.
We produce doors in two thicknesses 18mm and 22mm for added choice. Please add 5% to your price for 22mm doors and indicate on the order form.
Georgian, Classic and Edwardian shown overleaf with Ovolo edge available at no extra cost, please request when ordering. All other doors have square edges.
MDF Replacement Doors and Accessories
F R A M E D & S T A N D A R D D O O R S
Classic Flat Panel Fluted rail and flat panel
CJF TradingUnit 14 Mount Street Business Centre Nechells, Birmingham B7 5RD
All designs are copyright of CJF Trading “The Paint It Range”
Tel: 0121 327 7973 / 0121 730 2085
The standard position for the hinge when ordered. If a different place is required please state clearly the exact position
Measuring Your Doors Door heights on base units: doors and drawer fronts require clearances to allow for opening. If you are replacing doors that can be measured follow the instructions below.
Any door or combination of a door and drawer/drawers will be 5mm less than the height of the carcass with the door being flush with the bottom of the carcass. Gaps between the doors and drawers on the same unit will be 3mm (see fig 1).
Wall units heights: doors for wall units are 6mm less than carcass heights to allow a 3mm gap top and bottom (see fig 2)
Tall unit heights: doors for tall units are 3mm less than the carcass height. The doors are flush at the bottom with a 3mm gap at the top.
Door widths: Individual doors are 5mm less than the carcass width to allow a 2.5mm gap either side (see fig 3). Where doors are double each door is 4mm less than half the width of the carcass.
Door Specifications Drawer fronts up to 150mm high are 18mm or 22mm solid MDF (see fig 4). Drawer fronts from 150mm to 200mm have a 40mm top and bottom rail and a flat panel (see fig 5). Drawer fronts and doors above this have 75mm rails all round (see fig 6). Doors above 1600mm will have a centre rail above a 100mm rail 700mm panel. This rail can be positioned at a different height if required (see fig 7). Price grid relates to 18mm thick doors, for 22mm add 5% to price. Door centre panels will be either 6mm/12mm/15mm or 18mm depending on style and thickness.
Hinge Positions Hinge holes can be positioned anywhere. The exact location of the hinge must be specified when ordering. If hinge holes are ordered and no custom position is required they will be at 22mm centres from the edge of the door and 85mm centres from the top and bottom of the door (see fig 8). Doors over 1500mm require a third hinge.
Technical Information for Standard Doors
F R A M E D & S T A N D A R D D O O R S
5mm less than carcass height
Fig 1Single doors are 5mm less than the carcass width giving a 2.5mm gap either side
3mm gap between doors and drawers
Fig 2
Flush at the bottom
Door heights on wall units are 6mm less than overall height of unit to give a 3mm gap at the top and bottom
Solid drawer fronts up to 150mm
Drawer fronts between 150mm and 200mm have 40mm top and bottom rails
Fig 3
Door fronts and drawers above 200mm have 75mm rails all round
Centre rails on doors above 1600mm in height. Rail is positioned over a 700mm high
bottom panel. The rail is 100mm wide
22mm
85mm
Fig 6
Fig 4
Fig 5
Fig 8
Fig 7
All designs are copyright of CJF Trading “The Paint It Range”CJF Trading Unit 14 Mount Street Business Centre Nechells, Birmingham B7 5RD
Tel: 0121 327 7973 / 0121 730 2085
Accessories Details and Prices
F R A M E D & S T A N D A R D D O O R S
Lighting Pelmet The lighting pelmet fixes under the wall units. The front face of the pelmet comes flush with the front face of the doors. In 2400mm lengths.
Cornice The cornice is designed to fit to the top of the wall units and tall units. In 2400mm lengths.
Plinth The plinth can be fitted over the top of existing plinths. The plinth comes in two sizes 150mm x 15mm and 175mm x 15mm.
Additional Accessories End Panels End panels are designed to fix onto the end of wall units and base units to come level with the front face of the doors. Base unit panels should be ordered the same height as the carcass. The wall unit panels should be ordered 50mm taller if the lighting pelmet is to be used on the bottom of the units.
The end panels come in either 15mm or 12mm thicknesses with both available in a country style which is V grooved to match the country style doors.
Accessories Price Guide End panels 12mm or 15mm thick plain MDF. For the Country style with the v groove simply add 20% to the 12mm or 15mm price
Lighting Pelmet 2400 with edge mould £28.00
Cornice 2400 length fluted cornice in softwood £37.50
Plinth 2400 x 150 x 15 £16.00 2400 x 175 x 15 £18.00
Hinge Holes Each 35mm hole £0.50
Hinge Fully adjustable 35mm hinge each £2.75
Height (up to) 300mm 600mm
720 12mm £17.00 £20.50
15mm £19 .50 £24.00
1000 12mm £23.00 £27.00
15mm £25.50 £30.00
1800 12mm £28.00 £35.00
15mm £33.50 £40.00
2400 12mm £36.00 £43.00
15mm £41.00 £49.00
Width (up to)
Cornice
Plinth
Lighting Pelmet
End Panels - Plain or Country Style (V grooved)
Plinth
Lighting Pelmet
Cornice profile
Standard Kitchen/Wardrobe Door Price List
F R A M E D & S T A N D A R D D O O R S
Multypaned Glazed Doors These doors are available on the
Classic & Georgian panel only. They
are designed for a single
pane of glass at the rear
which is held in with
the beading supplied.
Available when ordering
22mm doors only
Kitchen/Wardrobe Multypaned & Framed Only Glazed Doors
Frame Only Doors These doors are
available in any style
and are rebated to the
rear and supplied with
glazing bead.
Please note: glass is
not included
Price Band A Plain/Moulded Edge
These doors have a 50% surcharge
over the price of the equivalent panel
door.
These doors have a 20% surcharge over the price
of the equivalent panel door.
Please note: glass is not included
Price Band B Shaker, Chamfered Shaker, Country
Door Width (upto)
300 400 500 600 700 800 900 1000 1200 150 7.10 8.20 8.97 10.42 11.09 12.84 14.14 15.53 18.90 200 9.17 11.99 13.04 13.30 16.48 17.23 18.43 18.70 20.30 350 13.42 16.95 19.81 24.57 25.39 29.58 31.28 35.43 25.20 720 23.10 28.16 32.60 38.49 41.93 900 29.82 39.69 41.23 46.20 51.71 1600 39.38 50.84 49.72 57.70 61.62 2000 53.94 62.60 69.99 79.88 86.68 2400 58.66 65.01 80.91 84.55 95.66
300 400 500 600 700 800 900 1000 1200 150 4.95 5.45 6.50 7.70 8.25 9.70 11.10 12.30 14.00 200 9.95 11.70 12.20 16.10 18.50 21.15 23.90 25.40 28.43 350 13.20 15.90 18.80 21.00 23.30 24.50 28.00 31.50 34.22 720 21.80 26.90 29.80 33.85 37.70 900 29.40 37.00 42.00 43.90 45.50 1600 39.00 41.40 48.90 55.50 61.90 2000 55.00 62.80 66.60 73.25 77.70 2400 60.00 68.40 75.60 83.20 88.90
Door Width (upto)
Do
or
Hei
gh
t (u
pto
)D
oo
r H
eig
ht
(up
to)
Price Band C Edwardian, Georgian, Victorian, ClassicDoor Width (upto)
300 400 500 600 700 800 900 1000 1200150 7.10 8.20 8.97 10.42 11.09 12.84 14.14 15.53 18.9200 13.83 18.08 19.66 20.06 24.85 25.98 27.79 28.20 30.6350 20.24 25.56 29.88 37.06 38.29 42.61 47.18 53.43 37.9720 34.84 42.47 49.17 58.04 63.23900 44.97 56.85 59.17 66.67 69.981600 55.39 65.67 66.98 82.01 80.932000 72.35 78.40 89.55 93.46 98.722400 78.66 88.04 98.01 106.50 118.25
Do
or
Hei
gh
t (u
pto
)
W A R D R O B E D O O R S
Wardrobe Door Specifications and Styles
Also available Georgian or Chamfered Shaker and moulded rails and stiles on Country style ( as
Georgian ). All doors are avilable either 18mm or 22mm. If ordering multypane doors we advise you
go for the thicker doors. They are priced from the standard doors
price list. These doors require a minimum of three hinges when above 1500mm in height. Profiles of
the doors are shown on the rear of the framed and standard door leaflett.
For technical information or if you wish to order Tel 0121 327 7973
CJF TradingUnit 14 Mount Street Business Centre Nechells, Birmingham B7 5RD
All designs are copyright of CJF Trading “The Paint It Range”
Tel: 0121 327 7973 / 0121 730 2085
COUNTRY
SHAKER
EDWARDIAN
FLAT PANEL
CLASSIC
VICTORIAN
NAME
ADDRESS
POST CODE
TELEPHONE No.
Send your completed order form to C.J.F. Trading Unit 14 Mount Street Business Centre, Nechells Birmingham B7 5RD.
Your order will be acknowleged within a few days. All cheques must be made payable to C.J.F. Trading
ORDER FORM Please list all of the doors you require giving the exact sizes. Remember to use the correct price band when filling in the form. After you
have listed the doors add any of the extras with their costs and then the postage and
packing. Don’t forget to give your full name, address and telephone numder in the space
provided.
Postage & PackingPlease add £30.00 for orders up to £200.00
and £10.00 for each additional £100.00 or part of for postage and packing
Quanity Height x Width Door Style Cost Each Total
Credit Card Payments
CHARGE TO MY : VISA DELTA JCB MASTERCARD
Card No:
Card Expiry Date Date Signature
3 Digit Security Code
l MAKERS OF BESPOKE KITCHEN AND BATHROOM FURNITURE l
F I X E D F R A M E D O O R S
Treat yourself to a bespoke kitchen. Our framed doors simply fix to your new or existing carcasses and transform a tired kitchen/bedroom with stunning results. Available in a range of styles to suit every taste. Each unit is supplied with all fixings for installation.
FRAMED DOORS
F I X E D F R A M E D O O R S
Measuring for your frame units The first measurement we require is the thickness of your existing or new carcasses. They are usually 15mm or 18mm thick (please mark the thickness on fixed frame door order form).
Carcase heights We need to know the height of your carcasses base and wall units (excluding plinth see fig 1). Also mark this on the order sheet along with the width and style for each frame in the appropriate places.Please check all carcasses.
Appliances When ordering frames for carcasses which house appliances we will require the inside measurement. To allow the appliance to be fully accessed as most appliances fit snugly to the inside of the carcasses. A sketch of the unit with sizes would assist (see fig 2,3).Your carcase will need space either side for the frame to fit. (as fig 2) If you are unable to alter the position of your carcase, units can be made for the doors only (as fig 3)
Drawers Your existing drawers will have to be cut down in size to operate correctly with the fixed frames. If you don’t fancy trying to cut your existing drawers down you can order new ones already sized for your frames. The drawers will be supplied with packing pieces to fit to your existing units so they will operate correctly.
Corner units Where you have a corner unit measure the width of both frames required, marking them A+B, so we know it is a corner. One unit will be made with an extra piece to go into the corner with the other one butting up.
Order Form List all frames with required measurements, thicknesses, styles, accessories etc. Calculate your total price including delivery charge. If you have any problems calulating your frame size give us a ring for assistance.
Technical Information for fixed frame Doors
Frame A
Frame B
Appliance drawing
Fixed frame
Drawer
Packing pieces
Plan view of drawer
Corner units
Every Fixed Frame unit comes complete with frame, the door/door ready hung drawer fronts and fixings to fit to your carcasses. Units can be supplied blank or primed for an extra cost. Full hand painted finishes are offered. You will have to discuss your requirements with us.
Plinth
Measure the height
of your carases
but not the plinth
Carcase
How to measure
Appliance completely framed where space allows. Internal measurements of carcase will be required.Where space is tight frames for top and bottom or whatever the combination can be made.
fig 1
fig 2 fig 3
CJF TradingUnit 14 Mount Street Business Centre Nechells, Birmingham B7 5RD
All designs are copyright of CJF Trading “The Paint It Range”
Tel: 0121 327 7973 / 0121 730 2085
Do not forget to order your End Panels, Skirting or Cornice
Drawers carcases are available for your new fixed frames. Supplied in a simple kit form, for you to
assemble, with high quality metal sides and runners. The draw carcases come with backets to fit to the
draw fronts and packing pieces to allow fitting to your existing carcaes for smooth operation. The bottom and
back of the draw is supplied in MFC.
use style B for wall units
Fixed Frame Kitchen /Wardrobe Door Price ListF I X E D F R A M E D O O R S
Frame Width (upto)
Frame Style
C
Drawer Height
Frame Width (upto)Carcase Height (upto)
300 400 500 600 720 86.25 94.10 98.40 103.85 900 92.60 99.45 102.50 112.70
Standard unit
drawrline
3Drawer unit
Frame Width (upto)
113.25 123.30 134.202000
Carcase Height (upto)
300 400 500 600 800 1000 Glass Doors 720 71.20 75.80 82.70 89.40 112.30 132.00 add 20% 900 79.15 84.70 89.10 96.90 122.20 139.25 for single 1200 92.40 98.00 109.15 119.00 130.40 148.90 pane doors 1600 101.50 107.25 121.00 129.35 and 50% for multiypane 146.40
300 400 500 600 800 1000 720 83.95 89.40 94.80 99.10 129.00 147.07 900 95.20 98.18 109.40 117.35 1600 107.00 113.05 124.20 132.00 2000 119.00 128.45 139.40 152.60
Frame Width (upto)
Carcase Height (upto)
Frame Style
A
Frame Style
B
ALL UNITS OVER 600 mm WIDE WILL
BE SPLIT INTO 2 DOOR STYLES
Standard unit Double unit
Double unitdrawline
Tall unit2 door
Tall unitsingle door
Note: All Fixed Frame doors and frames are produced from 22 mm thick MDF
300 400 500 600 118 36.00 39.00 42.00 45.00
Frame Unit Height
Carcase Height
40mm Approx
Plinth
Carcase
Please note Fixed Frame Units finish approximateley 40mm below bottom of carcase. If you require the unit to be an
exact size, for a dresser unit that sits on top of the worktop for example then put
the letter E next to the unit on your order form
l MAKERS OF BESPOKE KITCHEN AND BATHROOM FURNITURE l
S I M P L Y C H A M F E R E D S H A K E R
Treat yourself to a bespoke kitchen. Our shaker doors simply fix to your new or existing carcasses and transform a tired kitchen/bedroom with stunning results. Available in chamfered or standard shaker styles to suit every taste. Each unit is supplied with all fixings for installation.
SHAKER DOORS
use style B for wall units
Why not send for a sample doorbefore you order
R E P L A C E M E N T D O O R S
Create your dream kitchen. From theAmerican Shaker to the classic FixedFrame Doors. The choice is yours at aprice you can afford.
the ideal way to transform thatR E P L A C E M E N T D O O R S
Kitchen
Bedroom
BathroomBathroom Kits to give thatopulent feeling with vanity unitsand panelling to complementthe look. If you don't see whatyou want give us a call, we canusually make what you require.
Make your bedroom complete with ourrange of wardrobe doors. With a rangeof accessories forthe finishing touch.
Tel: 0121 327 7973 or 0121 730 2085 Website: www.cjftrading.co.uk
e-mail: [email protected]
For just £16.00 (including P & P) we will send you a sample door in the style of yourchoice. Sample doors are approx 350mm wide by 450mm high. For fixedframed doors add £1.50 for a sample of the frame . The cost of your sampledoor is redeemable against your first order (orders over £200)
Please send me sample door type ...........................................................................
Method of PaymentI enclose a cheque Postal Order (made payable to C.J.F. Trading) VISA DELTA SWITCH MASTERCARD
Card No:
DELIVERY DETAILS
NAME
ADDRESS
POST CODE
TEL:
SIGNATURE
Why not send for a sample doorbefore you order
Month Year Switch Issue No.3 Digit Security Code
Please list all of the doors you require giving the exact sizes. Remember to use the correct price
band when filling in the form. After you have listed the doors add any of the extras with their costs and then the postage and packing. Don’t forget to give your full name, address and telephone numder in
the space provided.
FIXED FRAME ORDER FORMNAME
ADDRESS
POST CODE
TELEPHONE No.
Send your completed order form to C.J.F. Trading Unit 14 Mount Street Business Centre, Nechells, Birmingham B7 5RD.
Your order will be acknowleged within a few days. All cheques must be made payable to C.J.F. Trading
Postage & PackingPlease add £30.00 for orders up to £200.00
and £10.00 for each additional £100.00 or part of for postage and packing
Please state the thickness of your Carcase 15mm or 18mm etc ...................................................
Date SignatureCard Expiry Date
Credit Card Payments
CHARGE TO MY : VISA DELTA JCB MASTERCARD
Card No:
Quanity Carcase Carcase Frame Side required for Door Style Cost Each Total Height Width Style hinges (L or R) (i.e. Shaker)
F o r t e c h n i c a l q u e r i e s o r to order call 0121 707 4466
3 Digit Security Code
M A K E R S O F B E S P O K E K I T C H E N A N D B A T H R O O M F U R N I T U R E
M D F W A L L P A N E L L I N G
W A L L P A N E L L I N G R A N G E
All our panelling is supplied in kit form with easyto follow assembly instructions. Each kit covers alenght of approximately 2300mm with skirtingand dado sold seperate. The four styles ofpanelling can be supplied with any of the
Shaker Style
The shaker style recreates the oldAmerican feel and looks greatanywhere.
Tongue & Groove
Looks like tongue and groove but in acomplete no mess sheet and is easyto fit.
Victorian
The same as shaker but with pre cut mouldingready to fix into the panels. Materials for fixingare supplied.
Edwardian
A classic style for any room. As the panels are raisedand fielded exact measurements are required whenordering. If fitting to a room individual sections toexact sizes can be produced.
This style rThis style rThis style rThis style rThis style requirequirequirequirequireseseseses
exact measurexact measurexact measurexact measurexact measurementsementsementsementsements
Wall Panelling Styles & Dimensionsthree types of skirting (chamfered, torus orvictorian at extra cost) and either of the dado rail styles ( standard or moulded) The panelling isavailable in two heights 900mm and 1100mm.
2300mm2300mm
2300mm
2300mm
Our traditional panelling is fully slotted together giving a rigid panel even before fittingsettle for nothing less! Don`t forget your skirting
900mmor
1100mm
900mmor
1100mm
900mmor
1100mm
900mmor
1100mm
W A L L P A N E L L I N G R A N G E
All our panelling is supplied in kit form with easyto follow assembly instructions. Each kit covers alenght of approximately 2300mm with skirtingand dado sold seperate. The four styles ofpanelling can be supplied with any of the
Shaker Style
The shaker style recreates the oldAmerican feel and looks greatanywhere.
Tongue & Groove
Looks like tongue and groove but in acomplete no mess sheet and is easyto fit.
Victorian
The same as shaker but with pre cut mouldingready to fix into the panels. Materials for fixingare supplied.
Edwardian
A classic style for any room. As the panels are raisedand fielded exact measurements are required whenordering. If fitting to a room individual sections toexact sizes can be produced.
This style rThis style rThis style rThis style rThis style requirequirequirequirequireseseseses
exact measurexact measurexact measurexact measurexact measurementsementsementsementsements
Wall Panelling Styles & Dimensionsthree types of skirting (chamfered, torus orvictorian at extra cost) and either of the dado rail styles ( standard or moulded) The panelling isavailable in two heights 900mm and 1100mm.
2300mm2300mm
2300mm
2300mm
Our traditional panelling is fully slotted together giving a rigid panel even before fittingsettle for nothing less! Don`t forget your skirting
900mmor
1100mm
900mmor
1100mm
900mmor
1100mm
900mmor
1100mm
Victorian Panelling900mm x 2300mm.....................................£99.00
1100mm x 2300mm.................................£105.00
Edwardian Panelling900mm x 2300mm per metre......................£62.00
1100mm x 2300mm per metre....................£71.00
Primed ready for painting.....................add 20%
Panelling FOR KITCHEN BATHROOM & BEDROOMSShaker Style Panelling900mm x 2300mm.....................................£87.00
1100mm x 2300mm...................................£95.00
Tongue and Grooved900mm x 2300mm.....................................£85.00
1100mm x 2300mm...................................£92.00
Wall Panelling Range Price List