H
GARAGE DOORS
EN
DE
RS
ON
January 2005
SECTIONAL GARAGE DOOR
g30
Protective covers shieldthe moving partsof the door through the complete opening and closing cycle.
Door rollers are positioned away from areas where fingers can easily reach them
The g30 is one of the safest garage doors ever made, surpassingexisting European requirements and designed from the start tomeet the next generation of CEN safety standards.
Created to be safe for all the family, the door has panel joints whichare shaped to push wayward fingers away from danger as the dooropens and closes.
Designed and developed in Scandinavia, the g30 is arevolution in garage door design.During 3 years of research, investigation and designwork, we've listened to homeowners and garage doorinstallers, safety professionals and security professionalsand we've used our experience to create a garage doorwhich we believe gives you more value for your money
So, what's the secret?Like all sectional garage doors the g30 consists ofhorizontal panels which rise vertically then glidehorizontally into the garage, requiring the minimum ofeffort to open and close.
However, this is where the similarity to other doorsends.The g30 has a host of secrets, designed to give youincreased safety, more warmth and strength, morebeauty and more space, all with the simplicity of gooddesign.
The SECRETS are in the detail
2
SECRET 1 Safety
Offset door rollers keepthem out of harms way
Warmth and strengthSingle sized g30 doors have a panel depth of 32 mm, up to 60% more than other doors in the same class.Doubles (over 3 metres wide) are 42 mm deep. This gives a strong, stable door panel with enough insulation for a Scandinavian winter.
An in-built 'air gap' between the inside and outside skins gives a broken cold bridge.This provides improved insulation and prevents thebuild up of condensation in the door.All round weatherproofing completes the superb insulation.
A revolutionary ventilation system is built into the full width of thebottom rubber weatherseal. If you require air to circulate in yourgarage, the vents can be left open. If not, they can be closed. Simple.
3
SECRET 2
Consistent panel depth(rear face shown)
Vents closed
Door cutaway section
Vents openMinimum 32mm deep
Ribbed style in fully finished white
And unlike other sectional doors,which have the handle towards theside edge of the door, the g30 handle is positioned in the middle.Thismeans that the door is opened and closed from the centre - thecorrect and easiest position, ensuring the door runs smoothly andevenly into the opening.
The g30 is available in 3 stylish designs:Georgian,Ribbed and the new,unique Ellipse style.There's a choice of either fully finished White orBrown colour, requiring only the occasional wash to keep the doorlooking like new. Or, if you prefer, the door can be supplied in a'primed' coat, ready for you to paint to match the existing colourscheme of your home.
If you want your door supplied in a RAL colour of your choice, wecan do that too. All you need to do is provide the RAL number andwe'll factory paint your door in a 30% gloss finish to suit.
SECRET 3
We've given a breath of fresh air to garage door skin design.Traditional fake woodgrain and stucco patterns are long past theirsell-by dates. The Henderson g30 has a beautiful and unique new skinfeaturing small triangular patterns, designed to catch the beauty ofnatural light.
A prominent Scandinavian design company has re-invented thegarage door handle,using concepts from the automobile industry togive superb style and easy use.
Traditional sectional door handles, which are gripped and turned to open, can be difficult for some people to use. The g30 handleworks in the direction of the door movement - simply lift the handleup to open and pull the handle down to close.
Real Beauty
4
The SECRETS are in the detail
The g30 gives you more of the 'daylight opening' to your garage,making life easier for owners of MPV and 4 wheel drive vehicles andideal for garages where the roof is low.
In addition, the door can be installed where there is only 70mmclearance on either side,making the g30 perfect for even the smallestgarage and ideal for replacing an old up and over door.
SECRET 4
Ellipse style in fully finished white
More Space SECRET 5Simplicity
An important principle in designing the g30 was the drive to 'keep itsimple'. The result is that the door has the minimum number ofdifferent fixing items and can be fitted with the minimum number oftools. No more fiddling for spanners or socket heads of differentsizes. Fewer tools means less hassle and fewer different fixingsmeans true simplicity of design.
5
The window surround is supplied in white if the door colour is whiteand in black if the door is any other colour.If you've ever had to leave the warmth of your car to open the garagedoor on a cold, wet or windy day, you can probably appreciate theluxury a remote control system could add to your life.
Order your g30 with a Henderson remote control system and thisluxury will be yours. Simply press a button and drive into anilluminated garage before closing the door behind you - all from thewarmth and safety of your car. We've created a unique g30 remotecontrol package, including 2 handsets to make this luxury possible ata surprisingly low price.
The g30 is available with a range of optional extras and accessories,from virtually any colour your imagination can create to a remotecontrol system which will add a touch of luxury to your life.
Each of the 3 door styles is available in a choice of white or brownpolyester paint finish as standard (brown finish costs slightly more).Your door will be fully finished,with no further painting required andonly an occasional wash with warm water needed to keep it lookinglike new.
If you want to paint your door to match the existing colour schemeof your home or if you want your imagination to run riot, we cansupply your g30 in a 'primed' finish, ready for you to paint to yourchosen colour scheme. Alternatively we can factory paint your doorto any RAL colour you choose. Your door will be supplied in a 30%gloss finish, ensuring a crisp colour without the 'glare' of a high glossfinish.
If you wish to maximise the natural daylight in your garage, the g30can be factory fitted with vision windows in the top panel section.
OPTIONS and ACCESSORIES
6
7
For security way beyond the norm, the g30 can be fitted with a HighSecurity anti-burglar kit.This kit adds even greater protection to theside track to prevent virtually any attempt to attack the door and togive you even greater peace of mind about the security of yourproperty and possessions. In addition, a remote control packageprovides upgraded security to the garage door.
When replacing your old garage door with a new g30, you can alsoupdate the side entrance door to the garage.Each of the three styleshave matching side doors, available in colours to match.
Georgian style in fully finished white
The RIGHT SIZE
To fit a g30 door behind the brickwork opening
Measure the brickwork opening width (A) and height (B). Ensure youhave adequate sideroom, headroom and clear space (depth) into thegarage. The space required is determined by the operating gearchosen. See the table below for details.
To fit a g30 door to a timber frame within the brickworkopening
Measure the brickwork opening width (A) and height (B). Subtractthe required side and headroom (as shown below) and install atimber frame to suit. For example, a door with standard tension gearwill require a timber frame of minimum nominal 3”x 3” (70mm x70mm) size for the frame legs and 6”x 3” (150mm x 70mm) for theframe head.
Garage doors are not always straightforward to install and Henderson recommend that you use a recognisedtradesperson to measure for and install your new door. To help you understand the size of garage door which is right foryour property, use the following guidelines.
The Henderson g30 sectional door can be fitted either to a goodquality timber frame or direct to sound brickwork and can be fittedeither within or behind the brickwork opening. If fitted within thebrickwork opening, the door must be fitted to a timber frame.
Tension
Tension (low headroom)
Torsion front
Torsion rear (low headroom)
OPERATING GEAR SIDEROOM(mm) MANUAL MANUAL*
HEADROOM (mm) DEPTH INTO GARAGE (mm)
AUTOMATIC AUTOMATIC
70
120
70
70
150
100
200
100
150
120
200
120
opening height (B) + 700mm
opening height (B)+ 750mm
opening height (B)+ 700mm
opening height (B)+ 800mm
B ≤ 2250 = 3350B ≥ 2375 = 4450
B ≤ 2250 = 3350B ≥ 2375 = 4450
B ≤ 2250 = 3350B ≥ 2375 = 4450
B ≤ 2250 = 3350B ≥ 2375 = 4450
SIDEROOM/HEADROOM REQUIRED AND DEPTH OF TRAVEL INTO GARAGE
8
When measuring the garage opening, always measure from more thanone point as the brickwork may not be consistent. Always ensure thereis sufficient internal clearance in the garage for the door to be installedand operate fully.
* when opening height is 1900mm, add on an extra 100mm
B
A
g30 DESIGN details
H
C XYZ
Daylight Width (DW)
Panel Width = Daylight Width + 42.5mm
XH
C
J GS
Daylight Width (DW)
Panel Width = Daylight Width + 42.5mm
XH
C
JG
S
(H) PANELHEIGHT
NUMBEROF RIBS
(X) RIBBEDAREA
(Y) SPACEBETWEEN RIBS
(Z) RIBWIDTH
(C) BOTTOMSPACING
See number Min 113mmof panels 6 300mm 58mm 9mm Max 146mm
by door height
DOOR HEIGHT (mm)
NUMBEROF PANELS
PANELHEIGHT (mm)
3000 6 4832800 5 5452650 5 5142500 5 4832375 5 4582250 4 5452125 4 5142000 4 4831900 4 458
RIBBED DOOR - PANEL DETAILS
(H) PANELHEIGHT
(DW) DAYLIGHTWIDTH mm
NUMBER OFEMBOSSES
(J) ENDSPACING
(S) LANDSPACING
(X) EMBOSSHEIGHT
(G) EMBOSSWIDTH
(C) BOTTOMSPACING
1800-2399 32400-3099 43100-3649 53650-4249 64250-5000 7
GEORGIAN DOOR - PANEL DETAILS
NUMBER OF PANELS BYDOOR HEIGHT
See numberof panels bydoor height
Min 71mmMax 231mm
Min 100mmMax 200mm
Min 91mmMax 151mm
310mm 500mm
(H) PANELHEIGHT
(DW) DAYLIGHTWIDTH mm
NUMBER OFELLIPSES
(J) ENDSPACING
(S) LANDSPACING
(X) ELLIPSEHEIGHT
(G) ELLIPSEWIDTH
(C) BOTTOMSPACING
1800-2199 52200-2599 62600-2999 73000-3399 83400-3799 93800-4199 104200-4599 114600-5000 12
ELLIPSE DOOR - PANEL DETAILS
See numberof panels bydoor height
Min 121mmMax 321mm
400mmMin 113mmMax 156mm
300mm 33mm
9
FRONT VIEW
FRONT VIEW
SIDE VIEW
10
CLEARANCES REQUIRED TO GIVE MAXIMUMPASS THROUGH OPENING
PASS THROUGH OPENING(FITTED WITHIN THE BRICKWORK OPENING)
45 45
45
68 68
52
68
10 10
10
4119.5
68
68
FITMENT BEHIND THE OPENING:OUTWARD OPENING DOOR
FITMENT BEHIND THE OPENING:INWARD OPENING DOOR
FITMENT WITHIN THE OPENING:
ORDER SIZE (mm)WIDTH x HEIGHT
OUTSIDE FRAME SIZE(mm)WIDTH x HEIGHT
PASS THROUGHOPENING (mm)
WIDTH x HEIGHTINWARD OPENING DOOR
MINIMUM MAXIMUM
OUTWARD OPENING DOOR
BRICKWORK OPENINGSIZE (mm) IF FITTED
WITHIN THE OPENING
BRICKWORK OPENING SIZE (mm) IF FITTED BEHIND THE OPENING - WIDTH x HEIGHT
T2 1000 x 2000 1136 x 2068 941 x 1980 1000 x 2000 - 1090 x 2045 1046 x 2023 - 1126 x 2063 1156 x 2078
T3 875 X 2125 1011 X 2193 816 x 2105 875 x 2125 - 988 x 2170 921 x 2148 - 1006 x 2188 1031 x 2203
T4 875 x 2000 1011 x 2068 816 x 1980 875 x 2000 - 988 x 2045 921 x 2023 - 1006 x 2063 1031 x 2078
T5 1000 x 2125 1136 x 2193 941 x 2105 1000 x 2125 - 1090 x 2170 1046 x 2148 - 1126 x 2188 1156 x 2203
DOORCODE
WIDTH HEIGHT
PASS THROUGH OPENING
WIDTH = OUTER FRAME SIZE - 195mm (127mm + 68mm)
HEIGHT = OUTER FRAME SIZE - 88mm (68mm + 19.5mm)
FRAME CLEARANCE RECOMMENDED (FITTED WITHIN THE BRICKWORK OPENING)
WIDTH 20mm - HEIGHT 10mm
10
127
90°19.5Threshold
41
10
68
6810
SIDE ENTRANCE DOOR SPECIFICATION
STYLES AVAILABLEGeorgian, Ellipse, Ribbed in 42mm profile
FINISHES AVAILABLETwo standard colours: White RAL 9016 and Brown RAL 8014 (brown chargable) or inspecial paint according to RAL and NCS colour systems.
HANDLEAll doors are supplied with a black aluminium handle and eurocylinder lock as standard
OPENING/HANDINGDoors can be supplied for opening to the left or to the right and to the inside or outside.Please state handing as viewed from the outside. ● Inward opening door, handle on the left (hinges on the right) = left handed● Outward opening door, handle on the left (hinges on the right) = right handed
g30 SIDE entrance DOORS
MINIMUM MAXIMUM
1. GARAGE DOORS AND REMOTE CONTROL SYSTEMS
Garage doors and remote control systems are warranted for a period of two years from the date ofinstallation (see General Conditions 2) against defective manufacture for both materials and workmanship,subject to the General Conditions stated below.In the event that warranty service is required, you should immediately contact the retailer from whom theproduct was purchased.
GENERAL CONDITIONS1. The product must be used solely for the purpose for which it was designed and must not be modifiedin any way without prior written permission.2. All claims under this guarantee must be made as soon as possible through the retailer or supplierfrom whom the goods were purchased and must be accompanied by an invoice or other recognisedcommercial document showing the date at which the guarantee commenced. The date of installation willnormally be taken as the date of purchase except where a door is part of a newly built property where theguarantee will commence from the date of first occupation provided the delay between installation andoccupation is of a reasonable duration.3. All Henderson garage doors and associated products must have been installed maintained andserviced in accordance with the user care and maintenance instructions and installation instructionsprovided. In particular, all pivot points, bearings, springs and rollers (not tracks) on doors should be oiledregularly and at least every six months. Primed doors must be "finished" as stated in the ‘caring for yourgarage door’ instructions immediately after installation. Because of the wide range of such paints andfinishes that are available, this warranty does not apply to any finish applied after shipment. In additionall doors should have their surfaces maintained and/or cleaned in accordance with these instructions atregular intervals and must have adequate air circulation and drainage to allow rainwater to clear.
4. During the period of this guarantee the product must be subject to regular inspection for generalwear and tear as well as correct operation by a competent person such as a trained garage door installer.Please note that repairs made by a non-competent person will invalidate this warranty.5. Subject to these conditions Henderson will repair or replace the product or components at itsdiscretion. Any replaced product or component will become the property of P C Henderson Ltd.6. The maximum liability under this warranty shall be the purchase price, including Value Added Tax,prevailing when the product was purchased. It does not cover consequential damage, nor does it coverdamage arising from incorrect handling, storage, installation or use, and impact or mechanical damagecaused on or after delivery. 7. Corrosion, discolouration and other effects arising from elements within the building or fromabnormal pollution or contact with bird droppings or aggressive fumes, chemicals or other such likeenvironments are also excluded.The guarantee under this warranty does not cover wear and tear on either the product or its component parts8. It is a fundamental condition of this guarantee that the product has been installed, maintained andserviced correctly and is used solely for the purpose for which it was designed. Incorrect installation,maintenance and service will invalidate this warranty, as will the use of spares not supplied by Henderson.The ‘caring for your garage door’ instructions are supplied with the door.9. Any claim made under this guarantee relating to a garage door must be accompanied by theinformation shown on the information label that is normally attached to the door. This information will beneeded when making a claim. 10. Henderson products are sold subject to its Standard Terms and Conditions of Sale. This guaranteeshall only apply to goods sold against these Conditions and after 1st May 2002.
All guarantees only apply to products, components and parts supplied bythis company.
PRODUCT GUARANTEE INFORMATION
OPERATING (LIFTING) GEARPivot points, bearings, springs and rollers should be oiled regularly (at least every 6 months). Anytracks (along which rollers or guides run) should not be oiled. Every 12 months, clean the rubber sealsand lightly coat with ‘Vaseline’ or a similar product.Check the condition of the door operating gear regularly, with particular attention to the condition of the springsand any cables.The spring tension may need to be adjusted as part of routine maintenance. We strongly recommend thata trained installer carries out this adjustment.If your door is supplied in a factory primed finish, it will require painting with a good quality semi-gloss or matt exterior household paint and appropriate undercoat as soon as possible after installation.
The primer coat is applied as a base coat only. Any marks or scratches on the primer coat should berubbed down and painted as part of the finishing process. Before applying the paint ensure the surfaceof the door has been washed down using a mild solution of water and non-abrasive detergent, (such aswashing up liquid). Then thoroughly wash the door with warm water a number of times removing anyevidence of the detergent. Check the paint to be used on a small test area on the rear face beforepainting the whole door. The final door coating is not covered by the Henderson Guarantee.Fully Factory Finished doors should require no further painting. To help preserve the appearance of thedoor periodically wash with warm water.
THE g30 DOOR IS CONSTRUCTED TO FULFILL THE FOLLOWING REQUIREMENTS
Resistance to Wind Load: EN 12426 Class 2
Operating Temperature Range: -30°C to +65°C
Thermal Transmittance: U Value U Value (with windows) Installed Door (width x height x panel thickness)
1,27 W/m2°C 1,37 W/m2°C 2500 x 2125 x 32mm
1,00 W/m2°C 1,10 W/m2°C 5000 x 2125 x 42mm
Resistance to Water Penetration: Without handle With handle
EN 12425 Class 3 EN 12425 Class 0
Air Permeability: Georgian Ellipse Ribbed
EN 12426 Class 2 EN 12426 Class 2 EN 12426 Class 1
Minimum No. of door openings tested: 20,000
CARING FOR YOUR g30 GARAGE DOOR
TECHNICAL INFORMATION
11
U.K. Customer Services Department
Telephone: 0191 377 1441 Facsimile: 0191 377 2972E-mail: [email protected]
Durham Road, Bowburn, County Durham DH6 5NG, England Telephone: 0191 377 0701 Facsimile: 0191 377 1309
www.pchenderson.com
P C Henderson (Ireland) LtdWest Link Industrial Estate, Kylemore Road, Dublin 10, Ireland
Telephone: 01626 0444 Fax: 01626 0455www.pchenderson.ie E-mail: [email protected]
