GasesGasesChapter 14
Review from Chapter 13 Pressure Describing gases: To describe a gas fully,
you need to state the 4 measurable quantities:1. Volume 3. Temperature
2. # of molecules 4. Pressure
Definition: The force per unit of area on a surface
Equation:
Measuring Pressure A barometer is a device used to measure
atmospheric pressure Introduced by Torricelli with experiments
involving mercury (Hg) He determined the air (atmosphere) could support
a column of Hg 760 mm high The height of the Hg depends on the air pressure
What would happen to the height of the column in the mountains?
What would happen to the height of the column 100ft under water?
Units of Pressure Pressure can be measured in many unitsmany units Most common: mm of Hg 1 mm Hg = 1 torr (in honor of Torricelli) Atmospheric Pressure at sea level and 0oC
is 760 mm Hg Other units of pressure include:
Atmospheres (atm) and Pascal (Pa)
CONVERSIONS760 mm Hg=
= 760 torr = 1 atm= 29.92 in Hg= 14.7 psi = 101325 Pa= 101.325 kPa
Standard Temperature and Pressure (STP) To compare volume of gases, it is necessary
to know the pressure at which the volume is measured
For purpose of comparison, scientists have agreed on standard conditions
STP= 1 atm pressure and 0oC
Review Calculation The atmospheric pressure in Denver is 0.830
atm. Express this in mmHg and kPa.
Boyle’s Law Robert Boyle studied the relationship
between pressure and volume Boyle’s Law: States that the volume
of a fixed mass of gas varies inversely with the pressure at constant temperature
Can be written as: PP11VV11= P= P22VV22
Practice Problem PP11VV11= P= P22VV22 A sample of oxygen gas has a volume of 150.
mL when its pressure is 0.947 atm. What will the volume of the gas be at a pressure of 0.987 atm if the temperature remains constant? P1= V1= P2= V2=
Charles’s Law Jacques Charles studied the
relationship between volume and temperature
Charle’s Law: States that the volume of a fixed mass of gas at constant pressure varies directly with the Kelvin temperature.
Can be written as:
Kelvin Temperature?
The Kelvin scale is K= 273 + oC -273 oC is the lowest possible temperature to
achieve (absolute zero) Absolute zero is given the value of zero on
the Kelvin scale
Practice ProblemA sample of neon gas occupies a volume of 752
mL at 25 oC. What will the volume of the gas occupy at 50oC if the pressure remains constant? V1=
T1=
V2=
T2=
Gay-Lussac’s Law
Gay-Lussac determined the relationship between temperature and pressure
Gay-Lussac’s Law: The pressure of a fixed mass of gas at constant volume varies directly with the Kelvin temperature
Can be written as:
Pre
ssu
re
(atm
)
Practice Problem The gas in an aerosol can is at a pressure of 3.00 atm
at 25oC. Directions on the can warn the user not to keep in a place where the temperature exceeds 52oC. What would the pressure in the can be at the 52oC? P1=
T1=
P2=
T2=
The Combined Gas Law A gas sample often undergoes changes in
temperature, pressure and volume. Combining all three (Boyle’s, Charles’, and
Gay-Lussac’s) will give us a valid equation Can be written as:
Practice Problem A helium filled balloon has a volume of 50.0 L at
25oC and 1.08 atm. What volume will it have at 0.855 atm and 10.oC? P1=
T1=
V1 =
P2=
T2=
V2 =
Avogadro’s Principal Equal volumes of gases at the same temperature and
pressure contain equal numbers of particles From Chapter 11: 1 mole= 6.02 x1023 particles
Molar volume for a gas is the volume that one mole occupies at 0.00oC and 1.00 atm pressure. (STP conditions)
Avogadro showed experimentally that one mole of any gas will occupy a volume of 22.4L at STP.
Conversion Factor: mol 1
L 4.22
Practice Problem What volume will 0.416 g of krypton gas
occupy at STP?
The Ideal Gas Law Describes the physical behavior of an ideal
gas in terms of pressure, volume, temperature, and the number of moles of gas present
PV=nRT R represents an experimentally determined constant that is
referred to as the ideal gas constant (depends on the units
used for pressure)
Numerical Values of the Gas Constant, R
Units of
R
Numerical Value of R
Units of
P
Units of
V
Units of
T
Units of
n
0.0821 atm L K mol
8.314 kPa L K mol
62.4 mm Hg L K mol
K mol
atm L
K mol
kPa L
K mol
mmHg L
Real vs. Ideal Gas An ideal gas is one whose particles take up
no space and have no intermolecular attractive forces In the real world, no gas is truly ideal.
Real gases deviate most from ideal gas behavior at extremely high pressures and low temperatures
Practice Problem What is the pressure in atm exerted by a 0.500 mol
samples of nitrogen gas in a 10.0L container at 298K?
Applying the Ideal Gas Law
Rearranging the PV=nRT equation allows you to also calculate the molar mass and density of a gas sample if the mass of the sample is known Recall from Chapter 12-
n (moles) = m (mass)/ M (molar mass) D= Density (mass/volume)
P
DRT
PV
mRT M
RT
MP D
Practice Problem Calculate the grams of N2 gas present in a
0.600 L sample kept at 1.00 atm pressure and a temperature of 22.0oC.
Gas StoichiometryWhy are we using stoichiometry? Suppose we need to determine the volume of something other than
our known (the given), we can apply stoichiometry to achieve the desired products/reactants
“Plan of Attack” Start with a BALANCED equation. Use stoichiometry first to get into the desired substance Use the Ideal Gas Law (IGL) to convert into volume of that
substance
Gas volume A moles A moles B mass B
Mass A moles A moles B gas volume B
Practice Problem What volume of chlorine gas at 38oC and 1.63 atm is
needed to react completely with 10.4 g of sodium to form NaCl? (Cl2 + 2Na 2NaCl)