GBR System SD-Screw SetThe GBR System is comprised of bone screws and bone plates that are used for bone fixation surgery. The bone screws and plates are notreusable. The bone screws are composed of the Titanium alloy (ASTM F136) and the bone plates are composed of the pure Titanium (ASTM F67 Grade 1). The screws are offered in following range; diameter (1.4, 1.6 mm) and length (6.0, 8.0, 10.0 mm). Also, the tip of screw has single type: the self-drilling and self-tapping available type and the type that require the pre-drilling (Surgeon's option). The bone plate is offered in 0.1 mm thickness and in length 36 mm × 22 mm. Each device is provided non-sterile. Steam sterilization is Recommendeded.
Product Code
GBR-System SD-SCREW Standard Set SD-SCR
SD-ScrewName Size Pieces Code
SD-Screw Ø1.4 mm / 6 mm 8 SDS-140-060
SD-Screw Ø1.4 mm / 8 mm 8 SDS-140-080
SD-Screw Ø1.4 mm / 10 mm 4 SDS-140-100
SD-Screw Ø1.6 mm / 6 mm 8 SDS-160-060
SD-Screw Ø1.6 mm / 8 mm 8 SDS-160-080
SD-Screw Ø1.6 mm / 10 mm 4 SDS-160-100
Ttanium Mesh Ø1.4 / 36x22x0.1t 1 SDP-S36-022
SD-SCRT (Equal composition)Name Size Code
Pilot Drill Ø1.2 mm / 28 mm SD-PD12
Pilot Drill Ø1.4 mm / 28 mm SD-PD14
Pilot Drill Ø1.6 mm / 28 mm SD-PD18
Remover Driver 20 mm TR-01
Remover Driver 26 mm TR-02
Remover Driver 52 mm TR-03
Turning handle TH-01
Driver handle DH-01
GBR System SD-Mesh-Tack Membrane Set
Product Code
SD-MESH-TAC Membrane Standard Set SD-MTAC
Titanium MeshName Size Code
Ttanium Mesh S Ø1.4 / 22x15x0.1t SDP-S22-015
Ttanium Mesh M Ø1.4 / 36x22x0.1t SDP-S36-022
Ttanium Mesh L Ø1.4 / 44x44x0.1t SDP-S44-044
Bone TacName Size Pieces Code
Standard Tac Ø2.0 mm / 3.5 mm 10 SBD-140-035
Standard Tac Ø2.0 mm / 5.0 mm 10 SBD-140-050
SD-MTACT (Equal composition)Name Code
Bone Tac Case Red BT-035
Bone Tac Case Blue BT-05
Remover Driver 20 mm TR-01
Remover Driver 26 mm TR-02
Mallet MT-414
Tac Applicator TA-01
Titanium MeshName Size Code
Ttanium Mesh Ø1.4 / 22x15x0.1 SDP-S22-015
GBR System SD-Screw Mini SetWe designed the best GBR kit that can exist in the market, and every part of it is a masterpiece nonetheless. This kit is a mini screw kit version for a minor to moderate GBR procedures.
Product Code
SD-SCREW-MINI Set SD-SCRM
SD-ScrewName Size Pieces Code
SD-Screw Ø1.4 mm / 3 mm 5 SDS-140-030
SD-Screw Ø1.4 mm / 4 mm 5 SDS-140-040
SD-Screw Ø1.4 mm / 6 mm 5 SDS-140-060
SD-Screw Ø1.6 mm / 8 mm 5 SDS-160-080
SD-Screw Ø1.6 mm / 10 mm 5 SDS-160-100
SD-Screw Ø1.6 mm / 12 mm 5 SDS-160-120
Equal compositionName Size Code
Remover Driver 20 mm TR-01
Remover Driver 52 mm TR-03
Driver handle DH-01
GBR System SD-GBR-Comfix Standard Set
Product Code
SD-GBR-COMFIX Standard Set SD-GBR
Bone TacName Size Pieces Code
Standard Tac Ø2.0 mm / 3.5 mm 10 SBD-140-035
Standard Tac Ø2.0 mm / 5.0 mm 10 SBD-140-050
Titanium MeshName Size Code
Ttanium Mesh S Ø1.4 / 22x15x0.1t SDP-S22-015
Ttanium Mesh M Ø1.4 / 36x22x0.1t SDP-S36-022
Ttanium Mesh L Ø1.4 / 44x44x0.1t SDP-S44-044
SD-ScrewName Size Pieces Code
SD-Screw Ø1.4 mm / 6 mm 4 SDS-140-060
SD-Screw Ø1.4 mm / 8 mm 4 SDS-140-080
SD-Screw Ø1.4 mm / 10 mm 2 SDS-140-100
SD-Screw Ø1.6 mm / 6 mm 4 SDS-160-060
SD-Screw Ø1.6 mm / 8 mm 4 SDS-160-080
SD-Screw Ø1.6 mm / 10 mm 2 SDS-160-100
SD-GBRT (Equal composition)Name Size Code
Pilot Drill Ø1.2 mm / 28 mm SD-PD12
Pilot Drill Ø1.4 mm / 28 mm SD-PD14
Pilot Drill Ø1.6 mm / 28 mm SD-PD18
Remover Driver 20 mm TR-01
Remover Driver 26 mm TR-02
Remover Driver 52 mm TR-03
Mallet MT-414
Tac Applicator TA-01
Turning handle TH-01
Driver handle DH-01
NLBC Ø5.0 mm with Stopper NLBC-ST5
Bone Tac Case Red for Tac 3.5 mm BT-035
Bone Tac Case Blue for Tac 5.0 mm BT-05