H4_Umschlag_EN 09.12.2010 10:33 Uhr Seite 1
C M Y CM MY CY CMY K
H4
SOFT FACE MALLETS
www.halder.com
EN
Erwin Halder KG
Erwin-Halder-Straße 5-988480 Achstetten-BronnenGermany
+49 (0)7392 7009-0� +49 (0)7392 7009-160
@ [email protected]� www.halder.com
3.00
0/E
N/1
2.10
The product range from Halder
Workholding Systems
Soft Face Mallets
Standard Parts
Aviation Products
Please ask for our actual product catalogues.
H4_U2_EN 09.12.2010 10:29 Uhr Seite 1
C M Y CM MY CY CMY K
In 1938 the company was founded by engineer ErwinHalder in order to produce the Simplex Soft Face Mallet.
What once started in a small mechanical workshophas developed to a worldwide operating companyhaving approx. 200 employees at five different sites.
After more than 70 years experience Erwin Halder KGas a manufacturer of high precision products has thenecessary performance and the profile of an idealpartner for industry and trade:
• professional competence,
• flexible adaptation to market requirements,
• individual customer consultation,
• development,
• excellent customer service,
• open-mindedness and internationalism,customers in more than 40 countries allover the world,
• manufacture of special and serial parts,according to our own or to customer design,
• sophisticated machinery,
• fully developed environmental consciousness,
• high level of investments.
Request for our services - we are preparedto meet the challenge.
...quality and service directly from the manufacturer
The Halder terms of delivery and payment as well as the current price list are valid for all parts and productscontained in this catalogue. Unless otherwise stated all dimensions are given in millimeters. We reserve theright to make alterations as a result of further development or printing errors. In order to assure a clear iden-tification of the parts, please use the order numbers specified.
Copyright Erwin Halder KG. Reproduction of this catalogue in whole or part is not allowedwithout our expresspermission.
H4_S1_inhaltsueb_EN 09.12.2010 10:16 Uhr Seite 1
C M Y CM MY CY CMY K
Halder Forestry Tools p.39 - 43
VPA
geprüfteSicherheit
Table of contents
Simplex Mallets p.3 - 13
Supercraft Mallets p.23 - 25
Punches, drop-mallets p.31 - 32
Inserts for punches, drop-mallets p.33
Matrix of applications p.2
Simplex Sledge Hammers p.14 - 15
Simplex inserts p.16 - 18
Simplex housings p.19
Simplex handles p.20
Supercraft Sledge Hammers p.25
Black Craft, Secural p.26
Supercraft handles p.28
Ferroplex Combi Hammer p.35 - 36
Supercraft inserts p.27
Sample case p.34
MaxxCraft Locksmith’s Hammer p.37 - 38
Safety instructions p.44
Fitting instruction Simplex Mallets p.22
Fitting “Supercraft” replacement parts p.29
The complete product catalogue forsoft face mallets H4 is also availableon Internet at www.halder.com
H4_S2_EN 09.12.2010 10:15 Uhr Seite 1
C M Y CM MY CY CMY K
Fields of Application:
Construction Industry
Paving
Floor tiling
Curbstone setting / Masonry work
Concrete form set-up
Scaffold construction
Tent and hall construction
Gardening and landscaping
Interior home construction
Metal-Working Industry
Motorcar assembly and repair work
Positioning of work pieces in the vice
Straightening work
Joining of work pieces
Repair and maintenance work
Car body work
Sheet-metal working
Dent removal
Housing assembly
Mould construction
Assembly of sharp-edged work pieces
Wood-Working Crafts
Furniture assembly
Window and door construction
Prefabricated-house construction
Joiner’s work
Carpenter’s work
Floor parqueting / laminating
Agriculture and Forestry
Fence construction
Wood splitting with wedge
Motor manual wood harvesting
Wood splitting
Maintenance and repair work on agricultural machines
* Various types of complete assembled Simplex Mallets you will find on p. 4 - 15We
reco
mm
end
:
TPE-
soft
*so
ftno
mar
ring
Com
posi
teru
bber
*m
ediu
m h
ard
TPE-
mid
*m
ediu
m h
ard
no m
arri
ng
Pla
stic
*ha
rd
Sup
erpl
astic
*m
ediu
m h
ard
Nyl
on *
hard
Sof
t met
al *
hard
Cop
per w
ithpl
astic
soc
ket *
hard
3366
. (p.
24)
3377
. (p.
24)
3389
. (p.
25)
3379
. (p.
26)
3380
. (p.
26)
3408
. (p.
32)
Application-Matrix
3677
. (p.
36)
3666
. (p.
38)
Spl
ittin
g in
sert
com
plet
e w
ithpl
astic
soc
ket
3007
. (p.
40)
Axe
bla
deco
mpl
ete
with
plas
tic s
ocke
t
3007
. (p.
41)
H4_S3_Zwiti_Simpl_EN 09.12.2010 10:15 Uhr Seite 1
C M Y CM MY CY CMY K
www.halder.com
Simplex Mallets
H4_S4_EN 09.12.2010 10:15 Uhr Seite 1
C M Y CM MY CY CMY K
*
*
*
4 * Inserts p.16 - 18, housings p.19, handles p.20, combination example p.13, fitting instruction p.22
EH 3001.
SimplexMallet
Design/Description:
Simplex Mallet with cast iron housing and wooden handle
Inserts:
TPE soft, blue on both sides, no marringsoft
Field of application:
Floor tiling, dent removal, furniture assembly, window and door construction,joiner's work
3001.030
3001.040
3001.050
3001.060
30
40
50
60
1.18
1.57
1.96
2.36
90
110
135
145
3.54
4.33
5.32
5.71
300
330
350
405
11.81
12.99
13.78
15.95
350
610
1070
1460
12
22
38
51
Art. No. mm inch mm inch mm inch g ozø
EH 3002.
SimplexMallet
Design/Description:
Simplex Mallet with cast iron housing and wooden handle
Inserts:
Composite rubber, black on both sidesmedium hard
Field of application:Paving, curbstone setting, scaffold construction, gardening and landscaping,concrete form set-up, prefabricated-house construction, carpenter's work,fence construction, finish work, dent removal
3002.030
3002.040
3002.050
3002.060
3002.080
30
40
50
60
80
1.18
1.57
1.96
2.36
3.14
90
110
135
145
175
3.54
4.33
5.32
5.71
6.89
300
330
350
405
490
11.81
12.99
13.78
15.95
19.27
345
660
1150
1550
2870
12
23
41
55
101
Art. No. mm inch mm inch mm inch g ozø
Design/Description:
Simplex Mallet with cast iron housing and wooden handle
Inserts:
TPE mid, grey on both sides, no marringmedium hard
Field of application:
Paving, floor tiling, finish work, furniture assembly, windowand door construction, joiner's work
EH 3003.
SimplexMallet
3003.030
3003.040
3003.050
3003.060
30
40
50
60
1.18
1.57
1.96
2.36
90
110
135
145
3.54
4.33
5.32
5.71
300
330
350
405
11.81
12.99
13.78
15.95
335
600
1070
1420
12
21
38
50
Art. No. mm inch mm inch mm inch g ozø
www.halder.com
H4_S5_EN 09.12.2010 10:15 Uhr Seite 1
C M Y CM MY CY CMY K
*
*
*
5* Inserts p.16 - 18, housings p.19, handles p.20, combination example p.13, fitting instruction p.22
EH 3006.
SimplexMallet
EH 3007.
SimplexMallet
EH 3008.
SimplexMallet
Design/Description:
Simplex Mallet with cast iron housing and wooden handle
Inserts:
Plastic, red on both sideshard
Field of application:
Automobile assembly and repair work, car body work, repairand maintenance work, sheet-metal working, dent removal,masonry work, scaffold construction
3006.030
3006.040
3006.050
3006.060
30
40
50
60
1.18
1.57
1.96
2.36
90
110
135
145
3.54
4.33
5.32
5.71
300
330
350
405
11.81
12.99
13.78
15.95
345
635
1120
1520
12
22
40
54
Art. No. mm inch mm inch mm inch g ozø
Design/Description:
Simplex Mallet with cast iron housing and wooden handle
Inserts:
Superplastic, white on both sidesmedium hard
Field of application:
Paving, curbstone setting, scaffold construction, tent and hall construction, gardeningand landscaping, sheet-metal working, dent removal, automobile assembly and repairwork, car body work, housing assembly, assembly of sharp-edged work pieces, fenceconstruction, wood splitting with wedge, concrete form set-up
3007.030
3007.040
3007.050
3007.060
3007.080
30
40
50
60
80
1.18
1.57
1.96
2.36
3.14
90
110
135
145
175
3.54
4.33
5.32
5.71
6.89
300
330
350
405
490
11.81
12.99
13.78
15.95
19.27
320
610
1040
1440
2660
11
22
37
51
94
Art. No. mm inch mm inch mm inch g ozø
Design/Description:
Simplex Mallet with cast iron housing and wooden handle
Inserts:
Nylon, white on both sideshard
Field of application:Scaffold construction, tent and hall construction, mould construction, automobileassembly and repair work, sheet-metal working, dent removal, housing assembly,assembly of sharp-edged work pieces, joining of work pieces, maintenance andrepair work on agricultural machinery
3008.030
3008.040
3008.050
3008.060
3008.080
30
40
50
60
80
1.18
1.57
1.96
2.36
3.14
90
110
135
145
175
3.54
4.33
5.32
5.71
6.89
300
330
350
405
490
11.81
12.99
13.78
15.95
19.27
340
650
1130
1500
2880
12
23
40
53
102
Art. No. mm inch mm inch mm inch g ozø
www.halder.com
H4_S6_EN 09.12.2010 10:15 Uhr Seite 1
C M Y CM MY CY CMY K
*
6
EH 3009.
SimplexMallet
Design/Description:
Simplex Mallet with cast iron housing and wooden handle
Inserts:
Soft metal, silver on both sideshard
Field of application:
Automobile assembly and repair work, straightening work,car body work, mould construction, foundries
3009.030
3009.040
3009.050
3009.060
3009.080
30
40
50
60
80
1.18
1.57
1.96
2.36
3.14
90
110
135
145
175
3.54
4.33
5.32
5.71
6.89
300
330
350
405
490
11.81
12.99
13.78
15.95
19.27
400
750
1380
1950
3860
14
26
49
69
136
Art. No. mm inch mm inch mm inch g ozø
* Inserts p.16 - 18, housings p.19, handles p.20, combination example p.13, fitting instruction p.22www.halder.com
H4_S7_EN 09.12.2010 10:14 Uhr Seite 1
C M Y CM MY CY CMY K
*
*
*
7* Inserts p.16 - 18, housings p.19, handles p.20, combination example p.13, fitting instruction p.22
Design/Description:
Simplex Mallet with cast iron housing and wooden handle
Inserts:
TPE soft, blue / composite rubber, blacksoft / medium hard
Field of application:
Paving, floor tiling, concrete form set-up, masonry work
EH 3012.
SimplexMallet
3012.030
3012.040
3012.050
3012.060
30
40
50
60
1.18
1.57
1.96
2.36
90
110
135
145
3.54
4.33
5.32
5.71
300
330
350
405
11.81
12.99
13.78
15.95
340
640
1095
1480
12
23
39
52
Art. No. mm inch mm inch mm inch g ozø
Design/Description:
Simplex Mallet with cast iron housing and wooden handle
Inserts:
TPE soft, blue / TPE mid, grey, no marringsoft / medium hard
Field of application:
Floor tiling, furniture construction, window and door construction,joiner's work
EH 3013.
SimplexMallet
3013.030
3013.040
3013.050
3013.060
30
40
50
60
1.18
1.57
1.96
2.36
90
110
135
145
3.54
4.33
5.32
5.71
300
330
350
405
11.81
12.99
13.78
15.95
340
620
1060
1420
12
22
37
50
Art. No. mm inch mm inch mm inch g ozø
Design/Description:
Simplex Mallet with cast iron housing and wooden handle
Inserts:
TPE soft, blue / superplastic, whitesoft / medium hard
Field of application:
Dent removal, furniture construction, window and door construction,joiner's work
EH 3017.
SimplexMallet
3017.030
3017.040
3017.050
3017.060
30
40
50
60
1.18
1.57
1.96
2.36
90
110
135
145
3.54
4.33
5.32
5.71
300
330
350
405
11.81
12.99
13.78
15.95
340
615
1055
1445
12
22
37
51
Art. No. mm inch mm inch mm inch g ozø
www.halder.com
H4_S8_EN 09.12.2010 10:13 Uhr Seite 1
C M Y CM MY CY CMY K
*
*
*
8 * Inserts p.16 - 18, housings p.19, handles p.20, combination example p.13, fitting instruction p.22
Design/Description:
Simplex Mallet with cast iron housing and wooden handle
Inserts:
Composite rubber, black / plastic, redmedium hard / hard
Field of application:
Paving, car body work, automobile assembly and repair work,scaffold construction, concrete form set-up, repair and main-tenance work, masonry work
EH 3026.
SimplexMallet
3026.030
3026.040
3026.050
3026.060
30
40
50
60
1.18
1.57
1.96
2.36
90
110
135
145
3.54
4.33
5.32
5.71
300
330
350
405
11.81
12.99
13.78
15.95
345
640
1130
1500
12
23
40
53
Art. No. mm inch mm inch mm inch g ozø
Design/Description:
Simplex Mallet with cast iron housing and wooden handle
Inserts:
Composite rubber, black / superplastic, whitemedium hard / medium hard
Field of application:Paving, curbstone setting, concrete form set-up, scaffold construction,tent and hall construction, gardening and landscaping, housing assembly,prefabricated-house construction, carpenter's work, fence construction,wood splitting with wedge
EH 3027.
SimplexMallet
Art. No. mm inch mm inch mm inch g ozø
3027.030
3027.040
3027.050
3027.060
3027.080
30
40
50
60
80
1.18
1.57
1.96
2.36
3.14
90
110
135
145
175
3.54
4.33
5.32
5.71
6.89
300
330
350
405
490
11.81
12.99
13.78
15.95
19.27
335
635
1105
1510
2770
12
22
39
53
98
Design/Description:
Simplex Mallet with cast iron housing and wooden handle
Inserts:
Composite rubber, black / nylon, whitemedium hard / hard
Field of application:
Automobile assembly and repair work, dent removal, repair andmaintenance work, joining of work pieces, housing assembly,maintenance and repair work on agricultural machinery
EH 3028.
SimplexMallet
3028.030
3028.040
3028.050
3028.060
3028.080
30
40
50
60
80
1.18
1.57
1.96
2.36
3.14
90
110
135
145
175
3.54
4.33
5.32
5.71
6.89
300
330
350
405
490
11.81
12.99
13.78
15.95
19.27
355
650
1140
1520
2890
13
23
40
54
102
Art. No. mm inch mm inch mm inch g ozø
www.halder.com
H4_S9_EN 09.12.2010 10:13 Uhr Seite 1
C M Y CM MY CY CMY K
*
*
*
9* Inserts p.16 - 18, housings p.19, handles p.20, combination example p.13, fitting instruction p.22
Design/Description:
Simplex Mallet with light alloy housing and wooden handle
Inserts:
TPE soft, blue on both sides, no marringsoft
Field of application:
Floor tiling, dent removal, furniture construction, joiner's work,window and door construction, assembly of delicate work pieces
EH 3101.
SimplexMallet
3101.030
3101.040
3101.050
3101.060
30
40
50
60
1.18
1.57
1.96
2.36
90
110
135
145
3.54
4.33
5.32
5.71
300
330
350
405
11.81
12.99
13.78
15.95
200
360
655
825
7
13
23
29
Art. No. mm inch mm inch mm inch g ozø
Design/Description:
Simplex Mallet with light alloy housing and wooden handle
Inserts:
Composite rubber, black on both sidesmedium hard
Field of application:
Dent removal, assembly of delicate work pieces, interiorhome construction
EH 3102.
SimplexMallet
3102.030
3102.040
3102.050
3102.060
30
40
50
60
1.18
1.57
1.96
2.36
90
110
135
145
3.54
4.33
5.32
5.71
300
330
350
405
11.81
12.99
13.78
15.95
210
405
740
980
7
14
26
35
Art. No. mm inch mm inch mm inch g ozø
Design/Description:
Simplex Mallet with light alloy housing and wooden handle
Inserts:
TPE mid, grey on both sides, no marringmedium hard
Field of application:
Floor tiling, furniture construction, window and door construction,joiner's work, assembly of delicate work pieces
EH 3103.
SimplexMallet
3103.030
3103.040
3103.050
3103.060
30
40
50
60
1.18
1.57
1.96
2.36
90
110
135
145
3.54
4.33
5.32
5.71
300
330
350
405
11.81
12.99
13.78
15.95
205
360
635
825
7
13
22
29
Art. No. mm inch mm inch mm inch g ozø
www.halder.com
H4_S10_EN 09.12.2010 10:13 Uhr Seite 1
C M Y CM MY CY CMY K
*
*
10
*
Design/Description:
Simplex Mallet with light alloy housing and wooden handle
Inserts:
Plastic, red on both sideshard
Field of application:
Automobile assembly and repair work, car body work,repair and maintenance work, sheet-metal working,dent removal, assembly of delicate work pieces
EH 3106.
SimplexMallet
3106.030
3106.040
3106.050
3106.060
30
40
50
60
1.18
1.57
1.96
2.36
90
110
135
145
3.54
4.33
5.32
5.71
300
330
350
405
11.81
12.99
13.78
15.95
205
390
720
920
7
14
25
32
Art. No. mm inch mm inch mm inch g ozø
Design/Description:
Simplex Mallet with light alloy housing and wooden handle
Inserts:
Superplastic, white on both sidesmedium hard
Field of application:
Automobile assembly and repair work, car body work, sheet-metalworking, dent removal, housing assembly, assembly of sharp-edgedwork pieces, assembly of delicate work pieces
EH 3107.
SimplexMallet
3107.030
3107.040
3107.050
3107.060
30
40
50
60
1.18
1.57
1.96
2.36
90
110
135
145
3.54
4.33
5.32
5.71
300
330
350
405
11.81
12.99
13.78
15.95
215
360
675
855
8
13
24
30
Art. No. mm inch mm inch mm inch g ozø
Design/Description:
Simplex Mallet with light alloy housing and wooden handle
Inserts:
Nylon, white on both sideshard
Field of application:
Automobile assembly and repair work, joining of work pieces, sheet-metalworking, dent removal, housing assembly, mould construction, assemblyof sharp-edged work pieces, assembly of delicate work pieces
EH 3108.
SimplexMallet
3108.030
3108.040
3108.050
3108.060
30
40
50
60
1.18
1.57
1.96
2.36
90
110
135
145
3.54
4.33
5.32
5.71
300
330
350
405
11.81
12.99
13.78
15.95
215
395
720
930
8
14
25
33
Art. No. mm inch mm inch mm inch g ozø
* Inserts p.16 - 18, housings p.19, handles p.20, combination example p.13, fitting instruction p.22www.halder.com
H4_S11_EN 09.12.2010 10:19 Uhr Seite 1
C M Y CM MY CY CMY K
*
*
11
*
* Inserts p.16 - 18, housings p.19, handles p.20, combination example p.13, fitting instruction p.22
Design/Description:
Simplex Mallet “C“ with reinforced cast iron housingand fibre-glass handle with rubber grip
Inserts:
TPE soft, blue on both sides, no marringsoft
Field of application:
Floor tiling, dent removal, furniture assembly,window and door construction, joiner's work
EH 3701.
SimplexMallet ”C”
3701.030
3701.040
3701.050
3701.060
30
40
50
60
1.18
1.57
1.96
2.36
90
110
135
145
3.54
4.33
5.32
5.71
300
330
330
410
11.81
12.99
12.99
16.14
450
850
1190
1710
16
30
42
60
Art. No. mm inch mm inch mm inch g ozø
Design/Description:
Simplex Mallet “C“ with reinforced cast iron housingand fibre-glass handle with rubber grip
Inserts:
Composite rubber, black on both sidesmedium hard
Field of application:Paving, curbstone setting, scaffold construction, gardeningand landscaping, concrete form set-up, prefabricated-houseconstruction, carpenter's work, fence construction, finish work
EH 3702.
SimplexMallet ”C”
3702.030
3702.040
3702.050
3702.060
3702.080
30
40
50
60
80
1.18
1.57
1.96
2.36
3,14
90
110
135
145
175
3.54
4.33
5.32
5.71
6,89
300
330
330
410
490
11.81
12.99
12.99
16.14
19.29
460
890
1250
1830
3420
16
31
44
65
121
Art. No. mm inch mm inch mm inch g ozø
Design/Description:
Simplex Mallet “C“ with reinforced cast iron housingand fibre-glass handle with rubber grip
Inserts:
TPE mid, grey on both sides, no marringmedium hard
Field of application:
Paving, floor tiling, finish work, furniture assembly,window and door construction, joiner's work
EH 3703.
SimplexMallet ”C”
3703.030
3703.040
3703.050
3703.060
30
40
50
60
1.18
1.57
1.96
2.36
90
110
135
145
3.54
4.33
5.32
5.71
300
330
330
410
11.81
12.99
12.99
16.14
450
850
1170
1710
16
30
41
60
Art. No. mm inch mm inch mm inch g ozø
www.halder.com
H4_S12_EN 09.12.2010 10:19 Uhr Seite 1
C M Y CM MY CY CMY K
*
*
*
12
Design/Description:
Simplex Mallet “C“ with reinforced cast iron housingand fibre-glass handle with rubber grip
Inserts:
Plastic, red on both sideshard
Field of application:
Automobile assembly and repair work, car body work, repairand maintenance work, sheet-metal working, dent removal,masonry work, scaffold construction
EH 3706.
SimplexMallet “C”
3706.030
3706.040
3706.050
3706.060
30
40
50
60
1.18
1.57
1.96
2.36
90
110
135
145
3.54
4.33
5.32
5.71
300
330
330
410
11.81
12.99
12.99
16.14
450
870
1230
1800
16
31
43
63
Art. No. mm inch mm inch mm inch g ozø
Design/Description:
Simplex Mallet “C“ with reinforced cast iron housingand fibre-glass handle with rubber grip
Inserts:
Superplastic, white on both sidesmedium hard
Field of application:
Paving, curbstone setting, scaffold construction, tent and hall construction, gardeningand landscaping, sheet-metal working, dent removal, automobile assembly and repairwork, car body work, housing assembly, assembly of sharp-edged work pieces, fenceconstruction, wood splitting with wedge, concrete form set-up
EH 3707.
SimplexMallet “C”
3707.030
3707.040
3707.050
3707.060
3707.080
30
40
50
60
80
1.18
1.57
1.96
2.36
3,14
90
110
135
145
175
3.54
4.33
5.32
5.71
6,89
300
330
330
410
490
11.81
12.99
12.99
16.14
19.29
450
860
1200
1750
3240
16
30
42
62
114
Art. No. mm inch mm inch mm inch g ozø
* Inserts p.16 - 18, housings p.19, handles p.20, combination example p.13, fitting instruction p.22
Design/Description:
Simplex Mallet “C“ with reinforced cast iron housingand fibre-glass handle with rubber grip
Inserts:
Copper with plastic socket on both sideshard
Field of application:
Automobile assembly and repair work, repair andmaintenance work, foundries
EH 3704.
SimplexMallet “C”
3704.030
3704.040
30
40
1.18
1.57
90
110
3.54
4.33
300
330
11.81
12.99
690
1410
24
50
Art. No. mm inch mm inch mm inch g ozø
www.halder.com
H4_S13_EN 09.12.2010 10:19 Uhr Seite 1
C M Y CM MY CY CMY K
*
*
13* Inserts p.16 - 18, housings p.19, handles p.20, fitting instruction p.22
Design/Description:
Simplex Mallet “C“ with reinforced cast iron housingand fibre-glass handle with rubber grip
Inserts:
Soft metal, silver on both sideshard
Field of application:
Automobile assembly and repair work, straightening work,car body work, mould construction, foundries
EH 3709.
SimplexMallet “C”
3709.030
3709.040
3709.050
3709.060
3709.080
30
40
50
60
80
1.18
1.57
1.96
2.36
3.14
90
110
135
145
175
3.54
4.33
5.32
5.71
6.89
300
330
330
410
490
11.81
12.99
12.99
16.14
19.29
520
1000
1490
2240
4290
18
35
53
79
151
Art. No. mm inch mm inch mm inch g ozø
You can combine the individual parts according to your specific requirements as follows:
For guarantee and safety reasons please only use Original Halder parts for all Halder Soft Face Mallets
Design/Description:
Simplex Mallet “C“ with reinforced cast iron housingand fibre-glass handle with rubber grip
Inserts:
Nylon, white on both sideshard
Field of application:Scaffold construction, tent and hall construction, mould construction, automobileassembly and repair work, sheet-metal working, dent removal, housing assembly,assembly of sharp-edged work pieces, joining of work pieces, maintenance andrepair work on agricultural machinery
3708.030
3708.040
3708.050
3708.060
3708.080
460
880
1240
1820
3390
16
31
44
64
120
Art. No. mm inch mm inch mm inch g ozø
30
40
50
60
80
1.18
1.57
1.96
2.36
3,14
90
110
135
145
175
3.54
4.33
5.32
5.71
6,89
300
330
330
410
490
11.81
12.99
12.99
16.14
19.29
EH 3708.
SimplexMallet “C”
www.halder.com
H4_S14_EN 09.12.2010 10:19 Uhr Seite 1
C M Y CM MY CY CMY K
*
*
14
3002.081 80 3.14 175 6.87 800 31.40 3270 7.2
Art. No. mm inch mm inch mm inch g lbø
* Inserts p.16 - 18, housings p.19, handles p.20, combination example p.18, fitting instruction p.22
Design/Description:
Simplex Sledge Hammer with cast iron housingand Hickory handle
Inserts:
Superplastic, white on both sidesmedium hard
Field of application:
Curbstone setting, tent and hall construction, fence construction,railway construction, gardening and landscaping, wood splittingwith wedge, concrete form set-up
EH 3007.
SimplexSledge Hammer
3007.081
3007.100
3007.125
3007.141
80
100
125
140
3.14
3.93
4.92
5.51
175
200
215
215
6.87
7.85
8.44
8.44
800
1000
1040
1045
31.40
39.25
40.82
41.02
3090
5200
7700
7900
6.8
11.4
16.9
17.3
Art. No. mm inch mm inch mm inch g lbø
Design/Description:
Simplex Sledge Hammer with cast iron housingand Hickory handle
Inserts:
Composite rubber, black on both sidesmedium hard
Field of application:
Curbstone setting, concrete form set-up, scaffold construction,fence construction, gardening and landscaping, prefabricated-house construction
EH 3002.
SimplexSledge Hammer
www.halder.com
H4_S15_EN 09.12.2010 10:18 Uhr Seite 1
C M Y CM MY CY CMY K
*
*
15* Inserts p.16 - 18, housings p.19, handles p.20, combination example p.18, fitting instruction p.22
Design/Description:
Simplex Sledge Hammer with cast iron housingand Hickory handle
Inserts:
Composite rubber, black / superplastic, whitemedium hard / medium hard
Field of application:
Curbstone setting, scaffold construction, prefabricated-house construction,tent and hall construction, fence construction, gardening and landscaping,wood splitting with wedge, concrete form set-up, railway construction
EH 3027.
SimplexSledge Hammer
3027.081 80 3.14 175 6.87 800 31.40 3170 7.0
Art. No. mm inch mm inch mm inch g lbø
Design/Description:
Simplex Sledge Hammer “C” with reinforced cast iron housingand fibre-glass handle with rubber grip
Inserts:
Soft metal, silver on both sideshard
Field of application:
Mould construction, foundries, repair and maintenance work
EH 3709.
SimplexSledge Hammer “C”
3709.081 80 3.14 175 6.87 800 31.40 4650 10.2
Art. No. mm inch mm inch mm inch g lbø
www.halder.com
H4_S16_EN 09.12.2010 10:18 Uhr Seite 1
C M Y CM MY CY CMY K
16 Housings p.19, handles p.20, combination example p.18, fitting instruction p.22
EH 3201.
Simplexinsert
EH 3202.
Simplexinsert
EH 3203.
Simplexinsert
Insert:
TPE soft, blue, no marringsoft
Field of application:
Floor tiling, dent removal, furniture assembly,window and door construction, joiner's work
3201.030
3201.040
3201.050
3201.060
30
40
50
60
1.18
1.57
1.96
2.36
Art. No. mm inch g ozø
Insert:
Composite rubber, blackmedium hard
Field of application:
Paving, curbstone setting, scaffold construction, gardening andlandscaping, concrete form set-up, prefabricated-house construction,carpenter's work, fence construction, dent removal
3202.030
3202.040
3202.050
3202.060
3202.080
30
40
50
60
80
1.18
1.57
1.96
2.36
3.14
Art. No. mm inch g ozø
Insert:
TPE mid, grey, no marringmedium hard
Field of application:
Paving, floor tiling, furniture assembly, window anddoor construction, joiner's work
3203.030
3203.040
3203.050
3203.060
30
40
50
60
1.18
1.57
1.96
2.36
Art. No. mm inch g ozø
23
47
90
135
1
2
3
5
30
65
125
205
430
1
2
4
7
15
22
45
85
140
1
2
3
5
www.halder.com
H4_S17_EN 09.12.2010 10:18 Uhr Seite 1
C M Y CM MY CY CMY K
17Housings p.19, handles p.20, combination example p.18, fitting instruction p.22
Insert:
Plastic, redhard
Field of application:
Automobile assembly and repair work, car body work, repair and maintenance work,sheet-metal working, dent removal, concrete form set-up, masonry work, scaffold construction
3206.030
3206.040
3206.050
3206.060
30
40
50
60
1.18
1.57
1.96
2.36
Art. No. mm inch g ozø
EH 3206.
Simplexinsert
EH 3207.
Simplexinsert
EH 3208.
Simplexinsert
Insert:
Superplastic, whitemedium hard
Field of application:
Paving, curbstone setting, scaffold construction, tent and hall construction, gardeningand landscaping, sheet-metal working, dent removal, automobile assembly and repairwork, car body work, housing assembly, assembly of sharp-edged work pieces, fenceconstruction, wood splitting with wedge
3207.030
3207.040
3207.050
3207.060
3207.080
3207.100
3207.125
3207.141
30
40
50
60
80
100
125
140
1.18
1.57
1.96
2.36
3.14
3.93
4.92
5.51
Art. No. mm inch g ozø
Insert:
Nylon, whitehard
Field of application:
Scaffold construction, tent and hall construction, mould construction, automobile assemblyand repair work, sheet-metal working, dent removal, housing assembly, assembly of sharp-edged work pieces, joining of work pieces
3208.030
3208.040
3208.050
3208.060
3208.080
30
40
50
60
80
1.18
1.57
1.96
2.36
3.14
Art. No. mm inch g ozø
25
60
115
190
1
2
4
7
22
50
100
160
325
450
735
860
1
2
4
6
11
16
26
30
26
65
120
195
405
1
2
4
7
14
www.halder.com
H4_S18_EN 09.12.2010 10:17 Uhr Seite 1
C M Y CM MY CY CMY K
18 Housings p.19, handles p.20, fitting instruction p.22
EH 3209.
Simplexinsert
EH 3804.
Simplexinsert
Insert:
Soft metal, silverhard
Field of application:
Automobile assembly and repair work, straightening work, car body work,mould construction, foundries
! Soft metal inserts 3209… must not be mounted into light alloy housing 3122…
3209.030
3209.040
3209.050
3209.060
3209.080
30
40
50
60
80
1.18
1.57
1.96
2.36
3.14
Art. No. mm inch g ozø
Insert:
Copper with plastic sockethard
Field of application:
Automobile assembly and repair work, repair and maintenance work, foundries
! Copper inserts 3804… must only be mounted into reinforced cast iron housing, black 3711…
3804.030
3804.040
30
40
1.18
1.57
Art. No. mm inch g ozø
You can combine the individual parts according to your specific requirements as follows:
For guarantee and safety reasons please only use Original Halder parts for all Halder Soft Face Mallets
55
120
250
405
855
2
4
9
14
30
145
325
5
11
www.halder.com
H4_S19_EN 09.12.2010 10:17 Uhr Seite 1
C M Y CM MY CY CMY K
19
EH 3011.
Simplexhousing
EH 3122.
Simplexhousing
EH 3711.
Simplexhousing
Housing:
Cast iron housing (complete with screw, nut and spring washer)
3011.030
3011.040
3011.050
3011.060
3011.080
3011.100
3011.125
3011.125
30
40
50
60
80
100
125
140
1.18
1.57
1.96
2.36
3.14
3.93
4.92
5.51
Art. No. mm inch g ozø
Housing:
Light alloy housing (complete with screw and nut)
! Soft metal inserts 3209… must not be mounted into light alloy housing 3122…
3122.030
3122.040
3122.050
3122.060
30
40
50
60
1.18
1.57
1.96
2.36
Art. No. mm inch g ozø
Housing:
Reinforced cast iron housing, black (complete with screw, nut and spring washer)
! Reinforced cast iron housing, black must only be mounted with fibre-glass handle 3844…
3711.030
3711.040
3711.050
3711.060
3711.080
30
40
50
60
80
1.18
1.57
1.96
2.36
3.14
Art. No. mm inch g ozø
Inserts p.16 - 18, handles p.20, combination example p.18, fitting instruction p.22
All insert types of our delivery programme can also be mounted intoreinforced cast iron housing, black.
225
420
725
975
1785
3550
5370
5370
8
15
26
34
63
125
189
189
90
170
330
395
3
6
12
14
265
530
785
1025
2160
9
19
28
36
76
www.halder.com
H4_S20_EN 09.12.2010 10:17 Uhr Seite 1
C M Y CM MY CY CMY K
20
EH 3244.
Simplexhandle
EH 3244.
Simplexhandle
EH 3844.
Simplexhandle
Inserts p.16 - 18, housings p.19, combination example p.18, fitting instruction p.22
Handle:
Hickory handlefor Simplex Sledge Hammer with cast iron housing
3244.030
3244.040
3244.050
3244.060
3244.080
30
40
50
60
80
1.18
1.57
1.96
2.36
3.14
260
275
310
335
395
9.1
9.6
10.8
11.7
13.8
Art. No. mm inch mm inch g ozø
Handle:
Wooden handlefor Simplex Mallet with cast iron housing or light alloy housing
3844.030
3844.040
3844.040
3844.060
3844.080
3844.081
30
40
50
60
80
80
1.18
1.57
1.96
2.36
3.14
3.14
260
267
267
340
400
700
9.1
9.3
9.3
11.9
14.0
24.5
Art. No. mm inch mm inch g ozø
Handle:
Fibre-glass handle with rubber gripfor Simplex Mallets “C” with reinforced cast iron housing, black
! Fibre glass handles must only be mounted into reinforced cast iron housing, black 3711…
3244.081
3244.100
3244.100
3244.100
80
100
125
140
3.14
3.93
4.92
5.51
700
900
900
900
24.5
31.5
31.5
31.5
Art. No. mm inch mm inch g ozø
65
100
130
150
255
2
4
5
5
9
610
890
890
890
22
31
31
31
130
220
220
400
435
790
5
8
8
14
15
28
www.halder.com
H4_S21_EN 09.12.2010 10:23 Uhr Seite 1
C M Y CM MY CY CMY K
21www.halder.com
Examples of application for Simplex Mallets: Application
H4_S22_EN 09.12.2010 10:22 Uhr Seite 1
C M Y CM MY CY CMY K
22 www.halder.com
Fitting instruction Simplex Mallets:
Please observe the following tightening torques after fitting replacement parts
3011.030 30
3011.040 40
3011.050 50
3011.060 60
3011.080 80
3011.100 100
3011.125 125
3011.160 160(Splitting Maul)
3011.750 750(Splitting Axe)
Housing: Art.-No. Size Tightening torque [Nm]
cast iron 15 15 15 15 15 15 20 x x x
25 25 25 25 25 25 40 x x x
30 30 30 30 30 30 50 x x x
40 40 40 40 40 40 75 x x x
x 50 x x 50 50 100 x x x
x x x x 175 x x x x x
x x x x 175 x x x x x
x x x x 160 x x x 160 x
x x x x 65 x x x x 65
light alloy
cast ironblack
TPE-
soft
Art
.-N
o. 3
201.
Com
posi
teru
bber
Art
.-N
o. 3
202.
TPE-
mid
Art
.-N
o. 3
203.
Pla
stic
Art
.-N
o. 3
206.
Sup
erpl
astic
Art
.-N
o. 3
207.
Nyl
onA
rt.-
No.
320
8.
soft
met
alA
rt.-
No.
320
9.
Cop
per
Art
.-N
o. 3
804.
Spl
ittin
g in
sert
Art
.-N
o. 3
210.
For guarantee and safety reasons
please only use Original Halder
parts for all Halder Soft Face Mallets
Inserts p.16 - 18, housings p.19, handles p.20, safety instructions p.44
3711.030 30
3711.040 40
3711.050 50
3711.060 60
3711.080 80
40 40 40 40 40 40 40 40 x x
60 60 60 60 60 60 60 60 x x
60 60 60 60 60 60 70 x x x
60 60 60 60 60 60 80 x x x
90 90 90 90 90 90 160 x x x
x = cannot be fitted in this combination!
3122.030 30
3122.040 40
3122.050 50
3122.060 60
15 15 15 15 15 15 x x x x
25 25 25 25 25 25 x x x x
30 30 30 30 30 30 x x x x
40 40 40 40 40 40 x x x x
Axe
bla
deA
rt.-
No.
321
0.
Fitting
H4_S23_Zwiti_Superc_EN 09.12.2010 10:22 Uhr Seite 1
C M Y CM MY CY CMY K
www.halder.com
Supercraft Mallets · non-rebound
H4_S24_EN 09.12.2010 10:22 Uhr Seite 1
C M Y CM MY CY CMY K
24 Inserts p.27, handles p.28, exchange of replacement parts p.29
Design/Description:
Supercraft Mallet, non-reboundwith Hickory handle
Inserts:
Nylon, whitehard
Field of application:
Automobile assembly and repair work, positioning of work pieces in thevice, tent and hall construction, car body work, repair and maintenancework, straightening work, housing assembly, assembly of sharp-edgedwork pieces, joining of work pieces, sheet-metal working
EH 3366.
SupercraftMallet
3366.020
3366.025
3366.030
3366.035
3366.040
3366.045
3366.050
3366.060
3366.070
3366.080
20
25
30
35
40
45
50
60
70
80
0.78
0.98
1.18
1.37
1.57
1.77
1.96
2.36
2.75
3.14
105
105
110
110
115
120
120
145
150
168
4.12
4.12
4.32
4.32
4.51
4.71
4.71
5.69
5.89
6.59
300
305
330
335
360
365
370
370
370
380
11.77
11.97
12.95
13.15
14.13
14.32
14.52
14.52
14.52
14.91
245
325
460
560
715
830
990
1705
2215
3210
9
11
16
20
25
29
35
60
78
113
Art. No. mm inch mm inch mm inch g ozø
Design/Description:
Supercraft Mallet, non-reboundwith steel tube handle and ergonomic rubber grip
Inserts:
Nylon, whitehard
Field of application:
Automobile assembly and repair work, joining of work pieces, positioningof work pieces in the vice, car body work, repair and maintenance work,straightening work, housing assembly, assembly of sharp-edged workpieces, sheet-metal working
EH 3377.
SupercraftMallet
3377.025
3377.030
3377.035
3377.040
3377.045
3377.050
3377.060
3377.070
25
30
35
40
45
50
60
70
0.98
1.18
1.37
1.57
1.77
1.96
2.36
2.75
105
110
110
115
120
120
145
150
4.12
4.32
4.32
4.51
4.71
4.71
5.69
5.89
270
290
295
300
305
310
325
335
10.60
11.38
11.58
11.77
11.97
12.17
12.76
13.15
385
585
690
805
935
1150
1750
2250
14
21
24
28
33
41
62
79
Art. No. mm inch mm inch mm inch g ozø
www.halder.com
H4_S25_EN 09.12.2010 10:22 Uhr Seite 1
C M Y CM MY CY CMY K
25
Design/Description:
Supercraft Mallet, non-reboundwith ergonomic three-component handle for easy handling
(the three-component handle consists of a fibre-glass core, a polypropylene layerand an antiskid elastomer layer)
Inserts:
Nylon, whitehard
Field of application:
Automobile assembly and repair work, joining of work pieces, positioningof work pieces in the vice, car body work, repair and maintenance work,straightening work, housing assembly, assembly of sharp-edged work pieces,sheet-metal working
EH 3389.
SupercraftMallet
3389.040
3389.050
3389.060
40
50
60
1.57
1.96
2.36
116
120
145
4.55
4.71
5.69
370
380
390
14.52
14.92
15.31
790
1040
1625
28
37
57
Art. No. mm inch mm inch mm inch g ozø
Inserts p.27, handles p.28, exchange of replacement parts p.29
Design/Description:
Supercraft Sledge Hammer, non-reboundwith Hickory handle
Inserts:
Nylon, whitehard
Field of application:
Wood splitting with wedges, fence construction, straightening work, railwayconstruction, repair and maintenance work, tool and machine construction
EH 3366.
SupercraftSledge Hammer
3366.081
3366.107
80
100
3.14
3.93
200
210
7.85
8.24
880
1000
34.54
39.25
4410
7050
9.7
15.5
Art. No. mm inch mm inch mm inch g lbø
www.halder.com
H4_S26_EN 09.12.2010 10:21 Uhr Seite 1
C M Y CM MY CY CMY K
26
Design/Description:
Black Craft Mallet, non-reboundwith ergonomic rubber grip
(housing with all-around polyurethane coating)
Field of application:
Automobile assembly and repair work, positioning of work pieces in the vice,straightening work, car body work, joining of work pieces, repair and main-tenance work, sheet-metal working, dent removal
EH 3379.
Black CraftMallet
Design/Description:
Secural Mallet, non-rebound with ergonomic rubber gripand robust sheet-metal housing
Inserts:
Polyurethane, yellow, rectangularmedium hard
Field of application:
Automobile assembly and repair work, positioning of work piecesin the vice, sheet-metal working, dent removal, housing assembly,car body work, furniture assembly, window and door construction,floor parqueting/laminating, joiner's work
EH 3380.
SecuralMallet*
3379.040
3379.050
3379.060
40
50
60
1.57
1.96
2.36
110
115
120
4.32
4.51
4.71
300
310
315
11.77
12.17
12.36
640
900
1300
23
32
46
Art. No. mm inch mm inch mm inch g ozø
3380.040 30x40 1.18 x1.57 117 4.59 300 11.77 680 24
Art. No. mm inch mm inch mm inch g ozø
* Secural inserts p.27, exchange of inserts p.29www.halder.com
H4_S27_EN 09.12.2010 10:21 Uhr Seite 1
C M Y CM MY CY CMY K
27Handles p.28, exchange of inserts p.29
EH 3508.
Supercraftinsert
EH 3508.
Supercraftinsert
EH 3511.
Securalinsert
Insert:
Nylon, white, for Supercraft Mallethard
3508.020
3508.025
3508.030
3508.035
3508.040
3508.045
3508.050
3508.060
3508.070
3508.080
20
25
30
35
40
45
50
60
70
80
0.78
0.98
1.18
1.37
1.57
1.77
1.96
2.36
2.75
3.14
Art. No. mm inch g ozø
Insert:
Nylon, white, for Supercraft Sledge Hammerhard
3508.080
3508.100
80
100
3.14
3.93
Art. No. mm inch g ozø
Insert:
Polyurethane, yellow, rectangular for Secural Malletmedium hard
3511.040 30x40 1.18x1.57
Art. No. mm inch g ozø
5
11
17
23
33
43
55
95
130
195
0.2
0.4
1
1
1
2
2
3
5
7
195
345
7
12
35 1
www.halder.com
H4_S28_EN 09.12.2010 10:21 Uhr Seite 1
C M Y CM MY CY CMY K
28
EH 3566.
Supercrafthandle
EH 3566.
Supercrafthandle
3566.081
3566.100
80
100
3.14
3.93
800
900
28.0
31.5
Art. No. mm inch mm inch g ozø
Handle:
Hickory handle for Supercraft Sledge Hammer
Handle:
Hickory handle for Supercraft Mallet
3566.025
3566.025
3566.030
3566.030
3566.040
3566.040
3566.040
3566.060
3566.060
3566.060
20
25
30
35
40
45
50
60
70
80
0.78
0.98
1.18
1.37
1.57
1.77
1.96
2.36
2.75
3.14
280
280
300
300
315
315
315
300
300
300
9.8
9.8
10.5
10.5
11.0
11.0
11.0
10.5
10.5
10.5
Art. No. mm inch mm inch g ozø
Inserts p.27, exchange of handles p.29
80
80
100
100
140
140
140
190
190
190
3
3
4
4
5
5
5
7
7
7
685
1030
24
36
www.halder.com
H4_S29_EN 09.12.2010 10:21 Uhr Seite 1
C M Y CM MY CY CMY K
29Inserts p.27, handles p.28, safety instructions p.44
Replacing the nylon inserts on non-rebound Supercraft Mallets:
Replacing the Hickory handle on non-rebound Supercraft Mallets:
1. Clamp the wornnylon insert firmlyin the vice and pullthe hammer offupwards.
2. With the hammerin the vice, pressthe new insertson to the insertretaining pegs.
For guarantee and safety reasons please only use Original Halder parts for allHalder Soft Face Mallets
1. Saw the handle off flushwith the handle protectivesleeve.
2. Use a punch to drive thespring cotter pin out.The spring cotter pin canbe reused.
3. Fully remove the rest ofthe wooden handle inthe protective sleeve bydrilling out.
4. Position the replacementhandle complete withaluminium wedge in theprotective sleeve and thenpress/knock the handle in.
5. Using a 3.8 mm diam. bit,drill through the handle viathe specified hole in thehandle protective sleeve.
6. Drive in the spring cotterpin until it is flush.
www.halder.com
Replacing
Supercraftinserts
Replacing
Supercrafthandles
H4_S30_EN 09.12.2010 10:20 Uhr Seite 1
C M Y CM MY CY CMY K
30
From the production to the final application -
highest quality standards…
…directly from the manufacturer!
www.halder.com
Supercraft
H4_S31_Zwiti_Klopf_EN 09.12.2010 10:27 Uhr Seite 1
C M Y CM MY CY CMY K
www.halder.com
Punches, Drop-mallets
H4_S32_EN 09.12.2010 10:27 Uhr Seite 1
C M Y CM MY CY CMY K
32
EH 3408.
Punch
EH 3408.
Drop-mallet
Inserts p.33, exchange of inserts p.33
Art. No. mm inch mm inch g ozø
3408.020
3408.025
3408.030
3408.035
3408.040
3408.045
3408.050
20
25
30
35
40
45
50
0.78
0.98
1.18
1.37
1.57
1.77
1.96
150
150
155
155
160
160
165
5.89
5.89
6.08
6.08
6.28
6.28
6.48
215
340
470
630
785
965
1250
8
12
17
22
28
34
44
Design/Description:
Drop-mallet, non-rebound
Inserts:
Nylon, white on both sideshard
Field of application:
Automobile assembly and repair work, housing assembly,repair and maintenance work, joining of work pieces
Art. No. mm inch mm inch g ozø
3408.010
3408.012
3408.015
10
12
15
0.39
0.47
0.59
168
170
175
6.59
6.67
6.87
90
130
200
3
5
7
Design/Description:
Punch, rebound
Inserts:
Nylon, white on both sideshard
Field of application:
Automobile assembly and repair work,repair and maintenance work
www.halder.com
H4_S33_EN 09.12.2010 10:27 Uhr Seite 1
C M Y CM MY CY CMY K
33
Insert:
Nylon, white, for punchhard
3508.010
3508.012
3508.015
10
12
15
0.39
0.47
0.59
Art. No. mm inch g ozø
Insert:
Nylon, white, for drop-mallethard
3508.020
3508.025
3508.030
3508.035
3508.040
3508.045
3508.050
20
25
30
35
40
45
50
0.78
0.98
1.18
1.37
1.57
1.77
1.96
Art. No. mm inch g ozø
vice
EH 3508.
Insert
Exchange and pressing in of inserts:
1
2
4
0.04
0.1
0.1
5
11
17
23
33
43
55
0.2
0.4
1
1
1
2
2
EH 3508.
Insert
www.halder.com
H4_S34_EN 09.12.2010 10:27 Uhr Seite 1
C M Y CM MY CY CMY K
34
Sample case:
equipped with the most frequently used mallets,for demonstration at the customer's site
3000.999 4600x3300x1600 180x129x63 6200 14
Art. No. mm inch g lb
EH 3000.
Sample case
www.halder.com
H4_S35_Zwiti_Ferro_EN 09.12.2010 10:26 Uhr Seite 1
C M Y CM MY CY CMY K
www.halder.com
Ferroplex Combi Hammer
2in1
H4_S36_EN 09.12.2010 10:26 Uhr Seite 1
C M Y CM MY CY CMY K
36 www.halder.com
EH 3677.
FerroplexCombi Hammer
Art. No. mm inch mm inch mm inch g ozø
3677.030
3677.035
30
35
1.18
1.37
104
104
4.10
4.10
290
295
11.38
11.58
600
800
21
28
Design/Description:
Ferroplex Combination Hammer with steel tube handle and ergonomicrubber grip. Hammer face made of heat-treated steel, induction hardened.Locksmith’s hammer and soft face mallet in one.
Insert:
Nylon, white exchangeable (Art. No. 3508.030/3508.035)hard
Field of application:
Mounting work in industry, crafts, motorcar assembly and repair,maintenance and service work, inclusion in tool cases and tool sets
Exchange of inserts p.29, safety instructions p.44
EH 3508.
Ferroplexinsert
Insert:
Nylon, white, for Ferroplex Combi Hammerhard
17
23
1
1
3508.030
3508.035
30
35
1.18
1.37
Art. No. mm inch g ozø
H4_S37_Zwiti_Maxx_EN 09.12.2010 10:25 Uhr Seite 1
C M Y CM MY CY CMY K
www.halder.com
MaxxCraft Locksmith’s Hammer
H4_S38_EN 09.12.2010 10:25 Uhr Seite 1
C M Y CM MY CY CMY K
38
++
+24,2%
DIN
500 g
MaxxCraft
500 g
-68,7%
DIN
500 g
MaxxCraft
500 g
EH 3666.
MaxxCraftLocksmith’sHammer
3666.003
3666.005
3666.008
3666.010
300
320
350
360
11.81
12.60
13.78
14.17
300
500
800
1000
11
18
28
35
Design/Description:
MaxxCraft Locksmith’s Hammer with Hickory handle, protective handlesleeve with rubber coating, reduced rebound, gentle on the joints,increased power of impact
Hammer head:
Drop-forged hammer head made of high-quality special steel with a peenand face which have been ground blank and a chamfered edge matchingrequirements.
Field of application:
Automobile assembly and repair work, straightening work, joining ofworkpieces, repair and maintenance work, car body work, sheet-metalworking, furniture assembly, window and door construction, joiner’swork, maintenance and repair work on agricultural machinery
EH 3266.
MaxxCrafthandle
Handle:
Ergonomically shaped Hickory handle for MaxxCraft Locksmith’s Hammer
3266.003
3266.005
3266.008
3266.010
MaxxCraft 300
MaxxCraft 500
MaxxCraft 800
MaxxCraft 1000
265
280
305
310
10.43
11.02
12.00
12.20
Art. No. for mm inch g oz
100
120
170
180
4
4
6
6
Art. No. mm inch g oz
Noticeably better: Measurably better:
Made inGermany.
Noticeable reducedrebound and thus fulltransmission of thepower of impact ontothe workpiece.
Fatigue-free workinggentle on the jointsthanks to low vibrationon impact.
Protective handlesleeve with rubbercoating to compensatefaulty strikes.
The increase of the power of impact with a simultaneousattenuation of the vibration on the handle has been testedand confirmed by ibe - Ingenieurbüro für Ergonomie.
* Schematic portrayal of the measured results for the purpose of clarification.Source: ibe - Ingenieurbüro für Ergonomie.
Impact power on pendulum ram impact testing machine
Imp
act
pow
erV
ibra
tion
load
on
hand
le
Vibration load in impact on steel
Vibration load measurement * 500 g locksmith’s hammer:
Impact power measurement* 500 g locksmith’s hammer:
www.halder.com
H4_S39_Zwiti_Forst_EN 09.12.2010 10:25 Uhr Seite 1
C M Y CM MY CY CMY K
www.halder.com
Halder Forestry Tools
H4_S40_EN 09.12.2010 10:24 Uhr Seite 1
C M Y CM MY CY CMY K
40 Fitting instructions p.22, safety instructions p.44
EH 3007.
SimplexSplitting Maul
Design/Description:
Simplex Splitting Maul with cast iron housing,heavy-duty protective sleeve and Hickory handle
Inserts:
Splitting insert drop-forged and hardened, with turned nose,made from high-grade carbon steel.
Insert superplastic, whitemedium hard
Fields of application:
Motor manual wood harvesting, striking of splitting wedges,splitting felled timber with a wedge, splitting 1-metre logs,driving wooden stakes, for professional and private woodcutting use.
EH 3210.
Simplexsplitting insert
Insert*:
Splitting insert complete with plastic socket, drop-forged and hardened,with turned nose, made from high-grade carbon steel.
! Splitting insert Art.No. 3210.160 must only be mounted intocast iron housing 3011.160.
EH 3011.
SimplexSplitting Maulhousing
1340 473210.160 65 2.56
Art. No. mm inch g oz
3007.160 60 2.36 65 2.56 900 35.43 4100 9
Art. No. mm inch mm inch mm inch g lb
* Superplastic insert Art.No. 3207.060 for Simplex Splitting Maul you will find on page 17
Housing:
Cast iron housing (complete with screw, nut and spring washer)
! Cast iron housing Art.No. 3011.160 must only be mounted withspare parts of the Simplex Splitting Maul.
ø-insert
3011.160 1900 67
Art. No. g oz
EH 3244.
SimplexSplitting Maulhandle
Handle:
Hickory handle for Simplex Splitting Maul
! Hickory handles Art.No. 3244.160 must only be mounted intocast iron housing 3011.160.
830 32.6
Art. No. mm inch g oz
3244.160 750 26
www.halder.com
H4_S41_EN 09.12.2010 10:32 Uhr Seite 1
C M Y CM MY CY CMY K
41Fitting instructions p.22, safety instructions p.44
EH 3007.
SimplexSplitting Axe
Design/Description:
Simplex Splitting Axe with cast iron housing,heavy-duty protective sleeve and Hickory handle
Inserts:
Axe blade drop-forged and hardened,ground and polished
Insert superplastic, whitemedium hard
Fields of application:
Motor manual wood harvesting, striking of splitting wedges, light wedge workon small wood, driving wedges to keep cut edge open, splitting firewood,driving wooden stakes, for professional and private woodcutting use
EH 3210.
Simplexaxe blade
Insert*:
Axe blade complete with plastic socket, drop-forged and hardenedand tempered, ground and polished
! Axe blade Art.No. 3210.750 must only be mounted into cast iron housing 3011.750.
EH 3011.
SimplexSplitting Axe
housing
930 32.793210.750 100 3.94
Art. No. mm inch g oz
3007.750 50 1.97 100 3.94 765 30.11 2700 5.9
Art. No. mm inch mm inch mm inch g lb
* Superplastic insert Art.No. 3207.050 for Simplex Splitting Axe you will find on page 17
Housing:
Cast iron housing (complete with screw, nut and spring washer)
! Cast iron housing Art.No. 3011.750 must only be mounted withspare parts of the Simplex Aplitting Axe.
ø-insert
3011.750 990 35
Art. No. g oz
EH 3244.
SimplexSplitting Axe
handle
Handle:
Hickory handle for Simplex Aplitting Axe
! Hickory handles Art.No. 3244.750 must only be mounted intocast iron housing 3011.750.
685 26.9
Art. No. mm inch g oz
3244.750 620 21
www.halder.com
H4_S42_EN 09.12.2010 10:31 Uhr Seite 1
C M Y CM MY CY CMY K
*
42
3556.260 260 10.2 50 1.97 3100 108
Art. No. mm inch mm inch g oz
* Inserts p.16 - 18, housings p.19, handles p.20, combination example p.18, fitting instruction p.22
Design/Description:
Simplex Sledge Hammer with cast iron housingand Hickory handle
Inserts:
Superplastic, white on both sidesmedium hard
Field of application:
Curbstone setting, tent and hall construction, fence construction,railway construction, gardening and landscaping, wood splittingwith wedge, concrete form set-up
EH 3007.
SimplexSledge Hammer
3007.081
3007.100
3007.125
3007.141
80
100
125
140
3.14
3.93
4.92
5.51
175
200
215
215
6.87
7.85
8.44
8.44
800
1000
1040
1045
31.40
39.25
40.82
41.02
3090
5200
7700
7900
6.8
11.4
16.9
17.3
Art. No. mm inch mm inch mm inch g lbø
Design/Description:
Heavy-duty twisted splitting wedge made of forged heat-treated steel,ground strike plate with chamfer, cutting edge is ground blank.
With guide groove, forged diagonal grooves and forged recessedgrips on sides
Field of application:
For the efficient, simple splitting of firewood.Optimum twist of 20° gives good splitting effect.Best used in conjunction with the Simplex Splitting Mauland the Simplex Sledge Hammer.
EH 3556.
HalderTwisted SplittingWedge
www.halder.com
H4_S43_EN 09.12.2010 10:30 Uhr Seite 1
C M Y CM MY CY CMY K
43
EH 3555.
HalderHand Axe
Design/Description:
Halder Hand Axe with leather handle.Robust all-steel design, made of special heat-treated steel.
Forged in one piece, finely ground and polished on all sides,corrosion-resistant, blade carefully hardened and ground tosharpness.
Hand-made, non-slip leather handle.
Field of application:
For splitting smaller logs and kindling, for sharpening woodenstakes, for rough carving tasks.Useful outdoor tool for campers, hunters, off-roaders, etc.
3555.370 370 14.55 90 3.54 1000 35
Art. No. mm inch mm inch g oz
www.halder.com
Fields of application for Halder Forestry Tools: Application
H4_S44_EN 09.12.2010 10:30 Uhr Seite 1
C M Y CM MY CY CMY K
44 www.halder.com
Safety instructions:
We have been manufacturing top quality soft face mallets for professional users in trade and industryfor over 70 years. Our soft face mallets have proved themselves a million times over in practical useand are highly sophisticated. Halder Soft Faced Mallets symbolize quality, reliability and safety in use.
To reduce the risks for the user and for other people in the same working area, the following safetyinstructions must be observed when working with our soft face mallets:
1. We recommend that you wear suitable protective clothing (e.g. protective gloves,safety eyewear) when working with soft face mallets.
2. When striking with soft face mallets, maintain an adequate safety distance toother persons and objects.
3. When striking heat-treated workpieces, always use a soft face mallet with plasticinserts.
4. Only use a soft faced mallet for the purpose for which it is intended. Avoid jarringblows and only use the striking faces of the hammer, never the side of the housing.
5. Select the appropriate hammer weight and diameter with regard to the workto be performed.
6. Before every use, check that the components of the soft face mallet are properlyaligned and tightened.
7. Never use a hammer with chips or burrs on the striking face. Worn replaceable parts(replacement inserts, wooden handles) must be replaced.
8. On warranty and safety grounds, only use Original Halder Replacement Parts forHalder Soft Faced Mallets.
9. Follow the fitting instructions on page 22 when fitting Simplex replacement parts.
10. Never strike one hammer against another.
11. Make sure that the soft face mallet is carefully maintained and properly storedafter use.
In addition to the above safety instructions, please observe any country-specific standards and regulations.
Safety
Notes
H4_U3_EN 09.12.2010 10:28 Uhr Seite 1
C M Y CM MY CY CMY K
AT
AU
BE
BA
BG
BR
CA
CH
CN
CZ
DK
ES
FI
FR
GB
HU
HR
IL
IN
IT
JP
KR
ME
MK
MX
NL
NO
PL
PT
RO
RS
SE
SG
SI
SK
TH
TR
TW
US
Our Partners Worldwide
AUSTRIA
AUSTRALIA
BELGIUM
BOSNIA-HERZEGOVINA
BULGARIA
BRAZIL
CANADA
SWITZERLAND
CHINA
CZECH REPUBLIC
DENMARK
SPAIN
FINLAND
FRANCE
GREAT BRITAIN
HUNGARY
CROATIA
ISRAEL
INDIA
ITALY
JAPAN
SOUTH KOREA
MONTENEGRO
MACEDONIA
MEXICO
NETHERLANDS
NORWAY
POLAND
PORTUGAL
ROMANIA
SERBIA
SWEDEN
SINGAPORE
SLOVENIA
SLOVAK REPUBLIC
THAILAND
TURKEY
TAIWAN
UNITED STATES
Please refer to www.halder.comfor contact details
of our agents ( • ) and subsidiaries ( )
H4_Umschlag_EN 09.12.2010 10:33 Uhr Seite 1
C M Y CM MY CY CMY K
H4
SOFT FACE MALLETS
www.halder.com
EN
Erwin Halder KG
Erwin-Halder-Straße 5-988480 Achstetten-BronnenGermany
+49 (0)7392 7009-0� +49 (0)7392 7009-160
@ [email protected]� www.halder.com
3.00
0/E
N/1
2.10
The product range from Halder
Workholding Systems
Soft Face Mallets
Standard Parts
Aviation Products
Please ask for our actual product catalogues.