8/3/2019 Gg_customer_presentation - Bomba Engranajes Internos
1/19
ENGINEEREDsolutionsUTHILL PUMP GROUP
8/3/2019 Gg_customer_presentation - Bomba Engranajes Internos
2/19
GlobalGear, March 20012
ENGINEEREDsolutionsUTHILL PUMP GROUP
W e t ook what you said andbuilt on it
When the engineers at Tuthill asked you what you wanted in a process
gear pump, you didnt hold back. You said you wanted a tough, reliable
pump. You said you wanted a modular design that can evolve with your
changing needs. You said you wanted a pump designed to reduce your
inventory. You said you wanted ease of maintenance. And you said you
wanted an alternative with minimal switching costs. We turned what we
learned into GlobalGear, a pump that delivers unparalleled built-in value.
8/3/2019 Gg_customer_presentation - Bomba Engranajes Internos
3/19
GlobalGear, March 20013
ENGINEEREDsolutionsUTHILL PUMP GROUPYousaid
You said you wanted a tough, reliable
pump.
8/3/2019 Gg_customer_presentation - Bomba Engranajes Internos
4/19
GlobalGear, March 20014
ENGINEEREDsolutionsUTHILL PUMP GROUPTough, ReliableDesign
Tough GearsThe rotor and idler gears are madeof tough ductile iron, which canhandle the stresses of highviscosity and high pressureoperation.
Strong Shaft Design
Most models employ high strength4140 alloy steel shafts. This, alongwith oversized shaft diametersensures a strong, reliable shaft.
Robust Bearing
Oversized ball bearings are used toensure years of trouble-free operation.
8/3/2019 Gg_customer_presentation - Bomba Engranajes Internos
5/19
GlobalGear, March 20015
ENGINEEREDsolutionsUTHILL PUMP GROUPYousaid
You said you wanted a modular design
that can evolve with your changing needs.
8/3/2019 Gg_customer_presentation - Bomba Engranajes Internos
6/19
GlobalGear, March 20016
ENGINEEREDsolutionsUTHILL PUMP GROUPModularPorts
Several port styles are available tomatch your piping needs:
Side-Side or Side-Top port positions
NPT tapped
BSPT tapped
ANSI 125#/150# flanged
ANSI 250#/300# flanged
ISO PN16 flanged
ISO PN40 flanged
Each pump size has numerous port sizechoices to minimize piping losses.For example, GG200 size has thesechoices:
2 or 50mm
2 or 65mm
3 or 80mm
4 or 100mm
Shown: GG200 with 2 NPT side portand ANSI 125# top port
Click here toskip animation
8/3/2019 Gg_customer_presentation - Bomba Engranajes Internos
7/19
GlobalGear, March 20017
ENGINEEREDsolutionsUTHILL PUMP GROUPM odular Sea lChamber
provides a choice of packing, mechanical seal or cartridgeseal without changing major pump components.
Packing
Cartridgeseal
Mechanicalseal
Click here toskip animation
8/3/2019 Gg_customer_presentation - Bomba Engranajes Internos
8/19
GlobalGear, March 20018
ENGINEEREDsolutionsUTHILL PUMP GROUPYousaid
You said you wanted a pump designed
to reduce your inventory.
8/3/2019 Gg_customer_presentation - Bomba Engranajes Internos
9/19
GlobalGear, March 20019
ENGINEEREDsolutionsUTHILL PUMP GROUPSt anda rd ShaftSizes
Standard shaft sizes let you use seals you probablyalready have for other rotating equipment. And thatapplies no matter where you are, because GlobalGearpumps are available with your choice of nominal inchor metric shaft sizes.
1 or 45 mm
Shown: GG120 - GG210 shaftchoices
8/3/2019 Gg_customer_presentation - Bomba Engranajes Internos
10/19
GlobalGear, March 200110
ENGINEEREDsolutionsUTHILL PUMP GROUPSpare DriveModules
The back pull-out design allows you to stock aspare drive module instead of a complete pump.
8/3/2019 Gg_customer_presentation - Bomba Engranajes Internos
11/19
GlobalGear, March 200111
ENGINEEREDsolutionsUTHILL PUMP GROUPYousaid
You said you wanted ease of
maintenance.
8/3/2019 Gg_customer_presentation - Bomba Engranajes Internos
12/19
GlobalGear, March 200112
ENGINEEREDsolutionsUTHILL PUMP GROUPBack Pull-Out
The back pull-out design greatly reduces down-timefor repairs the pump can be repaired withoutdisturbing the piping or shaft alignment.
spacer coupling
drive module
A.Typical time to
replace completepump
B.Typical time toreplace GlobalGeardrive module
Click here toskip animation
8/3/2019 Gg_customer_presentation - Bomba Engranajes Internos
13/19
GlobalGear, March 200113
ENGINEEREDsolutionsUTHILL PUMP GROUPInline Sea lAccess
Inline seal access design reduces seal maintenancetime the seal can be removed without disturbingthe piping or shaft alignment.
bearing assembly spacer coupling
seal
A.Typical time to
replace seal inpump withoutInline Seal Accessfeature
B.Typical time toreplace seal inGlobalGear pump
Click here toskip animation
8/3/2019 Gg_customer_presentation - Bomba Engranajes Internos
14/19
GlobalGear, March 200114
ENGINEEREDsolutionsUTHILL PUMP GROUPYousaid
And you said you wanted
an alternative with minimal switching
costs.
8/3/2019 Gg_customer_presentation - Bomba Engranajes Internos
15/19
GlobalGear, March 200115
ENGINEEREDsolutionsUTHILL PUMP GROUPNo PipingChanges
GlobalGear mounting dimensions match those ofmost other gear pumps.
Angle-Port versions Side-Port
versions
(click on image to animate) (click on image to
animate)
8/3/2019 Gg_customer_presentation - Bomba Engranajes Internos
16/19
GlobalGear, March 200116
ENGINEEREDsolutionsUTHILL PUMP GROUPNo DriveChanges
At any given speed, the GlobalGears flow ratesmatch those of most other gear pumps.
A.GG130at 780 RPM
B.Other gear pumpat 780 RPM
8/3/2019 Gg_customer_presentation - Bomba Engranajes Internos
17/19
GlobalGear, March 200117
ENGINEEREDsolutionsUTHILL PUMP GROUPSpecifications
Cast Iron and Carbon Steel Stainless Steel
USGPM M3/Hr USGPM M3/Hr
GG015 1800 15 @ 1750 RPM 2.8 @ 1450 RPM GG015 1200 10 @ 1150 RPM 1.8 @ 920 RPM
GG030 1800 30 @ 1750 RPM 5.7 @ 1450 RPM GG030 1200 20 @ 1150 RPM 3.7 @ 920 RPM
GG050 1500 38 @ 1150 RPM 6.9 @ 920 RPM GG050 1000 25 @ 780 RPM 5.7 @ 780 RPM
GG070 1500 50 @ 1150 RPM 9.1 @ 920 RPM GG070 1000 35 @ 780 RPM 7.9 @ 780 RPM
GG080 1500 60 @ 1150 RPM 10.9 @ 920 RPM GG080 1000 40 @ 780 RPM 9.1 @ 780 RPM
GG090 1500 75 @ 1150 RPM 13.7 @ 920 RPM GG090 1000 50 @ 780 RPM 11.4 @ 780 RPM
GG120 1200 75 @ 780 RPM 20 @ 920 RPM GG120 800 50 @ 520 RPM 11.4 @ 520 RPM
GG130 1000 100 @ 780 RPM 27 @ 920 RPM GG130 640 65 @ 520 RPM 14.8 @ 520 RPMGG200 1000 135 @ 640 RPM 31 @ 640 RPM GG200 640 90 @ 420 RPM 20.5 @ 420 RPM
GG210 800 140 @ 520 RPM 32 @ 520 RPM GG210 520 110 @ 420 RPM 25 @ 420 RPM
Max RPMnominal flowrate
Model Max RPMnominal flowrate
Model
Pressures to 200 psi(13.8 bar)
Temperatures to 600F(316C)
Viscosities to 1,000,000 ssu(220,000 cst)
Faster top speedsallow increasedflowrate, if needschange.
8/3/2019 Gg_customer_presentation - Bomba Engranajes Internos
18/19
GlobalGear, March 200118
ENGINEEREDsolutionsUTHILL PUMP GROUPPumpingPrinciple
Click on image to seethe Internal Gearpumping principle inaction.
8/3/2019 Gg_customer_presentation - Bomba Engranajes Internos
19/19
GlobalGear, March 200119
ENGINEEREDsolutionsUTHILL PUMP GROUPPumpConstruction
Click on image to see
the internalcomponents of theGlobalGear pump.