PO BOx 1309, MOntrOse, CO 81402 UsA • (800) 777-3745 • (970) 249-1515 • www.teirockdrills.com
TD75ElEcTric/HyDraulic limiTED accEss DrillGround Engineering, Foundation Repair, Seismic Retrofit and Coring
TD75 | ElEcTric / HyDraulic limiTED accEss Drill
Patented clamp and breaker
Installing 76mm hollow bar
Positioning controls
Drilling new foundation
Standard Features of the TD75:
• PatentedClampandBreakerSystem
• RDS550RotaryHeadandShockSub
• 180°SidetoSideMastRotation
• 75HP(56kW)ElectricMotor
Optional Features of the TD75:
• RadioRemoteforTrammingandPositioning
• TE350orTE550PatentedHydraulicDrifters
• HydraulicFoam/WaterMistingPump
• EUSafetyConformancePackage
Foundation repair
Coring in a dam
Drill controls
TD75 | ElEcTric / HyDraulic limiTED accEss Drill
The TD75 is an electric/hydraulic limited access drill designed to safely install cased and
hollowbarmicropilesinthemostdifficultareas.Therubbertrackscancontractto35-inches
(900mm)topassthroughastandarddoorway.TheabilityoftheTD75tomaneuverintotight
placesmakes itan idealmachineforseismicretrofits, foundationrepair,damrehabilitation
andgroundconsolidation.
us mETric
Mast Pullback 12,000 lbf 16,270 Nm
Rotary Torque 5,000 lbf 6,780 Nm
Supply Pressure 2500 PSI 172 bar
Electric Motor 75 HP 56 kW
Hydraulic Tank 30 Gallon 114 Liter
Power Imput 3-Phase 480 Volt / 60 Hertz 3-Phase 480 Volt / 50 Hertz
Generator Required 125 kW 125 kW
Weight 5,700 Lbs 2,585 kg
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.TEI TECHNICAL SPECIFICATIONS CONSIDER A 40% HYDRAULIC POWER LOSS
TEI08.023A
TD75 | ElEcTric / HyDraulic limiTED accEss Drill
RDS550 RoTaRy
PCFH5 FEED
ClaMP & BREakER
46.5” (1180.5 mm) SPREaD
FRONT VIEW
110” (2794 mm)
125” (3175 mm)
MAST ROTATED 90°
TD75 w/PCFH5 & RDS550
DIMS ARE INCHES [mm] TYP.
RDS550 DRILL HEAD
PCFH5 FEED
HCH85BW CLAMP AND BREAKER
80” (2032 mm)
MAST RO
TATED 90°
TD75 w
/PC
FH5 &
RD
S550
DIM
S ARE INCH
ES [mm
] TYP.
RDS550 D
RILL HEAD
PCFH5 FEED
HCH
85BW CLAM
P AND
BREAKER
34.7” (880.4 mm) ovERallWHEn RETRaCTED
MAST RO
TATED 90°
TD75 w
/PC
FH5 &
RD
S550
DIM
S ARE INCH
ES [mm
] TYP.
+122.6” (3115 mm)
HyDRaulIC oIl CoolER
180° MovEMEnT•24”(610mm)FeedExtend•30°SwingRighttoLeft•10°FeedOverVertical