GYPSUM PROFILES
Certificate Number Q19893
IntroductionIntroductionGypsum Boards are considered among the most economicand ideal way for wall partitioning.Easy to install, saves time and money, gypsum boards can also be used as a backing for wall treatments such as wall paper, fabric, tile and wood paneling or it can simply be painted.
SFSP provides a complete product range for drywall and ceiling constructions.Uni Metal Studs, Runners, Furring Channels, Ceiling Channels, and Wall Angles are among the range of products produced according to relevant standards to service the dry wall installers.
Uni Metal "GYPSUM PROFILES" a product of:
Specialized Factory for Steel Products (SFSP)Tel: +966 2 6374482 Fax: +966 2 6361963
E-mail : [email protected]
SIGMA Factory for Steel Products (SFSP)Tel: +971 4 3402637 Fax: +971 4 3402636
E-mail : [email protected]
SFSP
Gypsum
Profiles
11
SFSP
Gypsum
Profiles
22
Dry Wall Partition SystemDry Wall Partition System
Specifications:Uni Metal profiles for drywall are manufactured in accordance with ASTM-C645 requirements.
Uni Metal profiles are made from: Pre-galvanized steel complying with: -BS 2989: steel grade Z2, zinc coating type G275. -ASTM A653M - G90 -DIN EN 10147
Studs are boxed into the runners.
Runner Codes & DimensionsRunner Codes & Dimensions A
B
C
Runner
Stud Codes & DimensionsStud Codes & Dimensions
Stud
A
B
CA
B
C
SFSP
Gypsum
Profiles
Code SizeDimensions(mm)
A B C
RNR 048-GS
RNR 063-GS
RNR 070-GS
RNR 075-GS
RNR 092-GS
RNR 100-GS
RNR 125-GS
RNR 150-GS
48
63
70
75
92
100
125
150
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
49
64
71
76
93
101
126
151
Other lengths up to 6 m on request
Length
(cm)
Pcs./Palleted
bundle
300
300
300
300
300
300
300
300
200
200
100
100
100
100
100
100
Code SizeDimensions(mm)
A B C
STD 048-GS
STD 063-GS
STD 070-GS
STD 075-GS
STD 092-GS
STD 0100-GS
STD 125-GS
STD 150-GS
48
63
70
75
92
100
125
150
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
47
62
69
74
91
99
124
149
Other lengths up to 6 m on request
Length
(cm)
Pcs./Palleted
bundle
300
300
300
300
300
300
300
300
200
200
100
100
100
100
100
100
IntroductionIntroductionGypsum Boards are considered among the most economicand ideal way for wall partitioning.Easy to install, saves time and money, gypsum boards can also be used as a backing for wall treatments such as wall paper, fabric, tile and wood paneling or it can simply be painted.
SFSP provides a complete product range for drywall and ceiling constructions.Uni Metal Studs, Runners, Furring Channels, Ceiling Channels, and Wall Angles are among the range of products produced according to relevant standards to service the dry wall installers.
Uni Metal "GYPSUM PROFILES" a product of:
Specialized Factory for Steel Products (SFSP)Tel: +966 2 6374482 Fax: +966 2 6361963
E-mail : [email protected]
SIGMA Factory for Steel Products (SFSP)Tel: +971 4 3402637 Fax: +971 4 3402636
E-mail : [email protected]
SFSP
Gypsum
Profiles
11
SFSP
Gypsum
Profiles
22
Dry Wall Partition SystemDry Wall Partition System
Specifications:Uni Metal profiles for drywall are manufactured in accordance with ASTM-C645 requirements.
Uni Metal profiles are made from: Pre-galvanized steel complying with: -BS 2989: steel grade Z2, zinc coating type G275. -ASTM A653M - G90 -DIN EN 10147
Studs are boxed into the runners.
Runner Codes & DimensionsRunner Codes & Dimensions A
B
C
Runner
Stud Codes & DimensionsStud Codes & Dimensions
Stud
A
B
CA
B
C
SFSP
Gypsum
Profiles
Code SizeDimensions(mm)
A B C
RNR 048-GS
RNR 063-GS
RNR 070-GS
RNR 075-GS
RNR 092-GS
RNR 100-GS
RNR 125-GS
RNR 150-GS
48
63
70
75
92
100
125
150
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
49
64
71
76
93
101
126
151
Other lengths up to 6 m on request
Length
(cm)
Pcs./Palleted
bundle
300
300
300
300
300
300
300
300
200
200
100
100
100
100
100
100
Code SizeDimensions(mm)
A B C
STD 048-GS
STD 063-GS
STD 070-GS
STD 075-GS
STD 092-GS
STD 0100-GS
STD 125-GS
STD 150-GS
48
63
70
75
92
100
125
150
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
47
62
69
74
91
99
124
149
Other lengths up to 6 m on request
Length
(cm)
Pcs./Palleted
bundle
300
300
300
300
300
300
300
300
200
200
100
100
100
100
100
100
SFSP
Gypsum
Profiles
33
Dry Wall Partition System /Requirements
Stud & RunnerCode Description Dimensions Application
Approx.requirement
2per 100m partiton
3 m. high
RNR
STD
66 LM
200 LM
Forms head
& base perimeter
frame of partition
Forms vertical
component
of partition
Runner
Stud
48 to 150 mm
48 to 150 mm
Dry Wall Partition System /Requirements
InstallationInstallation
Dry Wall Partition System Standards: ASTM C754 / ASTM C840
- Ceiling & Floor Runners are aligned and secured in position.- Studs are secured vertically in position every 600 mm by
0 inserting them into the runners and twisting through 90 .- Studs shall not be located more than 50 mm from door jambs and abutting partitions.
Additional stud supportabove doors and windows
Metal runnerscrewed to ceiling
Doorframefromrunnersection
Wall board
Metal runnerscrewed to floor
Knockoutsfor cables
Metalstud
Wall boardFixing runners.
At L or T junction, leave clearance at top and bottom for board thickness
44
Ceiling System Codes & DimensionsCeiling System Codes & Dimensions
Suspended Ceiling SystemSuspended Ceiling System
Code Dimensions(mm)Length
(cm)
500
250
500
MCC 038-GS
FCL 035-GS
PAN 025-GS
11 x 38 x 11
12 x 22 x 35 x 22 x 12
25 x 25
300
300
300
Furring Channel
Main CeilingChannel
Perimeter Angle
Ceiling
Furring
Perimeter Angle
Specifications:Uni Metal profiles for drywall are manufactured in accordance with ASTM-C645 requirements.
Uni Metal profiles are made from: Pre-galvanized steel complying with: -BS 2989: steel grade Z2, zinc coating type G275. -ASTM A653M - G90 -DIN EN 10147
SFSP
Gypsum
Profiles
SFSP
Gypsum
Profiles
Pcs./Palleted
bundle
SFSP
Gypsum
Profiles
33
Dry Wall Partition System /Requirements
Stud & RunnerCode Description Dimensions Application
Approx.requirement
2per 100m partiton
3 m. high
RNR
STD
66 LM
200 LM
Forms head
& base perimeter
frame of partition
Forms vertical
component
of partition
Runner
Stud
48 to 150 mm
48 to 150 mm
Dry Wall Partition System /Requirements
InstallationInstallation
Dry Wall Partition System Standards: ASTM C754 / ASTM C840
- Ceiling & Floor Runners are aligned and secured in position.- Studs are secured vertically in position every 600 mm by
0 inserting them into the runners and twisting through 90 .- Studs shall not be located more than 50 mm from door jambs and abutting partitions.
Additional stud supportabove doors and windows
Metal runnerscrewed to ceiling
Doorframefromrunnersection
Wall board
Metal runnerscrewed to floor
Knockoutsfor cables
Metalstud
Wall boardFixing runners.
At L or T junction, leave clearance at top and bottom for board thickness
44
Ceiling System Codes & DimensionsCeiling System Codes & Dimensions
Suspended Ceiling SystemSuspended Ceiling System
Code Dimensions(mm)Length
(cm)
500
250
500
MCC 038-GS
FCL 035-GS
PAN 025-GS
11 x 38 x 11
12 x 22 x 35 x 22 x 12
25 x 25
300
300
300
Furring Channel
Main CeilingChannel
Perimeter Angle
Ceiling
Furring
Perimeter Angle
Specifications:Uni Metal profiles for drywall are manufactured in accordance with ASTM-C645 requirements.
Uni Metal profiles are made from: Pre-galvanized steel complying with: -BS 2989: steel grade Z2, zinc coating type G275. -ASTM A653M - G90 -DIN EN 10147
SFSP
Gypsum
Profiles
SFSP
Gypsum
Profiles
Pcs./Palleted
bundle
SFSP
Gypsum
Profiles
55
InstallationInstallationSuspended Ceiling- Main ceiling channels to be set at 1200 mm centers with hangers at 1200 mm center to center, starting at no more than 450 mm form wall.- Furring sections are set at 600 mm centers depending on thickness of boards.- Perimeter angles are set on all sides of the ceiling giving a base for the plaster boards.
AdjustableSuspension Hanger
Hanger to any requiredlength
Adjustmentspring
25mm x 25mm Galvanized wall angle
Drywall screwsat specified centers
Ceiling/walljunction
Plaster board
Plaster
PerimeterAngle
FurringChannel A A
B
C C
Main CeilingChannel
A
BC
A
B
Suspended Ceiling System/ RequirementsSuspended Ceiling System/ Requirements
Code Description Dimensions ApplicationApprox.
requirement2per 100m
PAN 40 LM
Fixed round the
perimeter to
receive ends of
furring channels
and outer edges
of plaster board
Perimeter
Angle
(Wall Angle)
FCL 200 LM
Support section
where plaster
board is fixed
Furring
Channel
12 x 22 x 35x 22 x 12mm
MCC 110 LMMain support for
furring channels
Main Ceiling
Channel11 x 38 x 11mm
25 x 25 mm
SFSP
Gypsum
Profiles
Standard Tool KitStandard Tool Kit
Power screwdriver
Wallboard hand saw
BMI Level
Tinsnips
Stainless steelfinishing knife Taping knife
Measuring tape
Chalk lineUtility knifePlumb line
AccessoriesAccessories
Corner tape Drywall joint tapeBracket
UNITECH
Wire connecting clip
Drywall screw Framing screw Ready mixjoint compound
SFSP
Gypsum
Profiles
66
AdjustableSuspension Hanger
Hanger to any requiredlength
Adjustmentspring
SFSP
Gypsum
Profiles
55
InstallationInstallationSuspended Ceiling- Main ceiling channels to be set at 1200 mm centers with hangers at 1200 mm center to center, starting at no more than 450 mm form wall.- Furring sections are set at 600 mm centers depending on thickness of boards.- Perimeter angles are set on all sides of the ceiling giving a base for the plaster boards.
AdjustableSuspension Hanger
Hanger to any requiredlength
Adjustmentspring
25mm x 25mm Galvanized wall angle
Drywall screwsat specified centers
Ceiling/walljunction
Plaster board
Plaster
PerimeterAngle
FurringChannel A A
B
C C
Main CeilingChannel
A
BC
A
B
Suspended Ceiling System/ RequirementsSuspended Ceiling System/ Requirements
Code Description Dimensions ApplicationApprox.
requirement2per 100m
PAN 40 LM
Fixed round the
perimeter to
receive ends of
furring channels
and outer edges
of plaster board
Perimeter
Angle
(Wall Angle)
FCL 200 LM
Support section
where plaster
board is fixed
Furring
Channel
12 x 22 x 35x 22 x 12mm
MCC 110 LMMain support for
furring channels
Main Ceiling
Channel11 x 38 x 11mm
25 x 25 mm
SFSP
Gypsum
Profiles
Standard Tool KitStandard Tool Kit
Power screwdriver
Wallboard hand saw
BMI Level
Tinsnips
Stainless steelfinishing knife Taping knife
Measuring tape
Chalk lineUtility knifePlumb line
AccessoriesAccessories
Corner tape Drywall joint tapeBracket
UNITECH
Wire connecting clip
Drywall screw Framing screw Ready mixjoint compound
SFSP
Gypsum
Profiles
66
AdjustableSuspension Hanger
Hanger to any requiredlength
Adjustmentspring
77
SFSP
Gypsum
Profiles
Regular boardsRegular boards
Water ResistantWater Resistant
Description
Advantages
Boards are composed of a gypsum core encased in paper on the face side and a paperliner on the back side. The face paper is folded around long edges to reinforce and protect the core. The ends are square cut and finished smooth. The long edges are tapered on the face side to form a shallow channel for the joint reinforcement.
* Eliminate excessive moisture in construction.* Exceptionally resistant to cracks caused by minor frame movements, vibrations or settlements.* Quick and easily applied, low cost installation.* Suitable for all decorations: Paint, textile, wallpaper, tiling.
Technical characteristics
Thermal resistance
9.5 mm
12.5 & 15 mm
0.03 m. K/W2
0.04 m. K/W2
0.05 m. K/W2
18 mm
Plasterboard rangePlasterboard range
Thicknessmm
( 0.4 mm )
Widthmm
(+0 mm -5 mm)
Approx.weightkg/m2
Lengthmm
(+ 0.5 mm)
9.5
12.5
15
18
7.9
10.2
12.1
14.9
1800 - 4000
1800 - 4000
1800 - 4000
1800 - 4000
1 200
1 200
1 200
1 200
Boards are covered with a multi sheet cellulose, impregnated with silicone.The core of the boards is also treated with silicone oil.This treatment provides a high protection against water and moisture.
Properties The main technical properties of water resistant gypsum boards are:- Moisture absorption according to ASTM C 473/84 tests.- Surface absorption less than 160 gm. after 2 hours.- Immersion absorption less than 5% of the weight after two hours of immersion.
Applications The main application is for walls and partitions where there is a risk of flooding, such as: Bathrooms, kitchens, gymnasiums, technical rooms, basements, etc.
ApplicationsFor internal use only:* Ceiling* Under roofing* Wall lining* Partitioning
Fire ResistantFire ResistantThose are the gypsum boards which have fibre glass incorporated in their plaster cores thus achieving a greater fire resistance.
Properties & ApplicationsThe longer fire resistance of those boards makes them specially adequate for buildings where a special fire protection is required.
2 OThermal conductivity (W/m C): 0.18.Classified M-1, non flammable according to UNE 23.727 standard.
Standard Dimensions (mm).
Thickness
Width
Length
12.5
1200
2400-3000
15
1200
2400-3000
StorageStacks of boards should be stored on a level surface in a dry place, preferably inside a building and protected from damp and rainy weather.It is possible to stack 4 pallets one on each other.
Handling Boards should be carried on edge.
CuttingWith a knife or cutter
Cutting of Stud & RunnerMetal studs and runners are cut with tinsnips from one flange to the other.
Screwing of Gypsum BoardsUse a power screwdriver and drywall screws, adjust the chuck of the screwdriver, for proper depth.
Make a cut into the facing liner, guided by a
straight edge.
Turn the board over and bend it. The grey liner is
easy to cut.
Break it by snapping.
With a hand saw
Make out the line and saw off.
Boards WorkingBoards Working
SFSP
Gypsum
Profiles
88
77
SFSP
Gypsum
Profiles
Regular boardsRegular boards
Water ResistantWater Resistant
Description
Advantages
Boards are composed of a gypsum core encased in paper on the face side and a paperliner on the back side. The face paper is folded around long edges to reinforce and protect the core. The ends are square cut and finished smooth. The long edges are tapered on the face side to form a shallow channel for the joint reinforcement.
* Eliminate excessive moisture in construction.* Exceptionally resistant to cracks caused by minor frame movements, vibrations or settlements.* Quick and easily applied, low cost installation.* Suitable for all decorations: Paint, textile, wallpaper, tiling.
Technical characteristics
Thermal resistance
9.5 mm
12.5 & 15 mm
0.03 m. K/W2
0.04 m. K/W2
0.05 m. K/W2
18 mm
Plasterboard rangePlasterboard range
Thicknessmm
( 0.4 mm )
Widthmm
(+0 mm -5 mm)
Approx.weightkg/m2
Lengthmm
(+ 0.5 mm)
9.5
12.5
15
18
7.9
10.2
12.1
14.9
1800 - 4000
1800 - 4000
1800 - 4000
1800 - 4000
1 200
1 200
1 200
1 200
Boards are covered with a multi sheet cellulose, impregnated with silicone.The core of the boards is also treated with silicone oil.This treatment provides a high protection against water and moisture.
Properties The main technical properties of water resistant gypsum boards are:- Moisture absorption according to ASTM C 473/84 tests.- Surface absorption less than 160 gm. after 2 hours.- Immersion absorption less than 5% of the weight after two hours of immersion.
Applications The main application is for walls and partitions where there is a risk of flooding, such as: Bathrooms, kitchens, gymnasiums, technical rooms, basements, etc.
ApplicationsFor internal use only:* Ceiling* Under roofing* Wall lining* Partitioning
Fire ResistantFire ResistantThose are the gypsum boards which have fibre glass incorporated in their plaster cores thus achieving a greater fire resistance.
Properties & ApplicationsThe longer fire resistance of those boards makes them specially adequate for buildings where a special fire protection is required.
2 OThermal conductivity (W/m C): 0.18.Classified M-1, non flammable according to UNE 23.727 standard.
Standard Dimensions (mm).
Thickness
Width
Length
12.5
1200
2400-3000
15
1200
2400-3000
StorageStacks of boards should be stored on a level surface in a dry place, preferably inside a building and protected from damp and rainy weather.It is possible to stack 4 pallets one on each other.
Handling Boards should be carried on edge.
CuttingWith a knife or cutter
Cutting of Stud & RunnerMetal studs and runners are cut with tinsnips from one flange to the other.
Screwing of Gypsum BoardsUse a power screwdriver and drywall screws, adjust the chuck of the screwdriver, for proper depth.
Make a cut into the facing liner, guided by a
straight edge.
Turn the board over and bend it. The grey liner is
easy to cut.
Break it by snapping.
With a hand saw
Make out the line and saw off.
Boards WorkingBoards Working
SFSP
Gypsum
Profiles
88
YA
-1010
215
0 -
ED
03
Sigma FactoryFor Steel Products
Specialized FactoryFor Steel Products
Kingdom of Saudi Arabia, Jeddah, Tel: +966 2 6374482Fax: + 966 2 6361963 e-mail: [email protected]
United Arab Emirates, Dubai, Tel : +971 4 3402637Fax: +971 4 3402636 e-mail: [email protected]