www.tridonic.com 369Catalogue 2014
Elec
troni
c tra
nsfo
rmer
s
Halogen transformers
Overview
Product / function matrix
Product information
Halogen transformers
Dimming via leading-edge and trailing-edge phase dimmers
TE speedy
TE VIPER
TE VIPER with cable
TE BASIC
TE 0105
Digital dimming
TE one4all sc
TE one4all cc
Wiring diagrams and installation examples
Page 373
Page 374
Page 375
Page 376
Page 378
Page 380
Page 370
Page 381
Page 372
Page 377
www.tridonic.com370 Catalogue 2014
Product / function matrix
Halogen transformersOverview
PortfolioTE speedy TE VIPER TE BASIC
High functionality
Wattage range 20 – 105 VA 20 – 105 VA 20 – 60 VA
SELV yes yes yes
Mains voltage230 – 240 V
50/60 Hz230 – 240 V
50/60 Hz220 – 240 V
50/60 Hz
For use in emergency lighting systems(EN 50172)
Soft start yes yes
Constant output voltage
High level of safety
Intelligent Voltage Guard for constantlychecking the mains voltage
Short-circuit shutdown featurewith automatic restart
yes yes yes
Overtemperature protection yes yes
Overload protection yes yes yes
Protection class II II II
Type of protection IP20 IP20 IP20
Efficient dimming
Leading-edge and trailing-edge phase dimmers yes yes yes
switchDIM
corridorFUNCTION
Digital interface DSI / DALI
High degree of flexibility
Built-in version yes
Surface-mounted version yes yes
Double-sided terminals yes
Single-sided terminals yes yes
High qualityApproval marks
Guarantee 5 years 3 years 3 years
www.tridonic.com 371Catalogue 2014
Elec
troni
c tra
nsfo
rmer
s
Halogen transformersOverview
PortfolioTE 0105 TE one4all sc TE one4all cc
High functionality
Wattage range 35 – 105 VA 20 – 150 VA 20 – 105 VA
SELV yes yes yes
Mains voltage230 – 240 V0/50/60 Hz
230 – 240 V0/50/60 Hz
230 – 240 V0/50/60 Hz
For use in emergency lighting systems(EN 50172)
yes yes
Soft start yes yes yes
Constant output voltage yes yes yes
High level of safety
Intelligent Voltage Guard for constantlychecking the mains voltage
yes
Short-circuit shutdown featurewith automatic restart
yes yes yes
Overtemperature protection yes yes yes
Overload protection yes yes yes
Protection class II II II
Type of protection IP20 IP20 IP20
Efficient dimming
Leading-edge and trailing-edge phase dimmers yes
switchDIM yes yes
corridorFUNCTION yes yes
Digital interface DSI / DALI yes yes
High degree of flexibility
Built-in version yes
Surface-mounted version yes yes
Double-sided terminals yes yes yes
Single-sided terminals
High qualityApproval marks
Guarantee 5 years 5 years 5 years
www.tridonic.com372 Catalogue 2014
Halogen transformers
Tridonic electronic transformers are characterisedabove all by excellent economic efficiency, excep-tional lighting comfort and high reliability. This diverse product range offers the best way of integratinglow-voltage halogen lamps in lighting solutions easily. Task-specific control ranges from digital using a DALI or DSI interface, leading-edge and trailing-edge phase dimmers and momentary-action switch operation using switchDIM.
Optimal lamp operationElectronic transformers operate lamps with high-frequency voltages in the range from 30 to 40 kHz.The innovative electronic system with switch-oncurrent limiting, soft-starting and a constant non-load dependent output voltage over the entire output range ensures optimum lamp operation and hence long lamp service life.
In the case of the digital transformers, a unique circuit concept stabilises the output voltage regardless ofthe input voltage. The ASIC is the core of the patented circuitry and ensures optimised, low-loss control ofthe power circuitry and all protective and monitoring functions in the event of overloads, overtemperature and short circuits.
Thanks to high-quality components, intelligent circuit design and extensive inspection and test programs at rated operating conditions, Tridonic TE transformers achieve an average life of 50,000 hours with a failure probability of less than 10 %, i.e. an average failure rate of 0.2 % per 1,000 hours of operation.
These features ensure that lighting installationswith low-voltage halogen lamps achieve a high levelof economic efficiency.
Constantly high qualityThe consistently high quality and reliability of theTridonic TE transformers is guaranteed by the useof high-grade materials together with manufacturing processes certified to ISO 9001. Fully automaticmanufacture ensures constant reproducible quality.All transformers are subjected to 100 % final testing and safety testing.
Standards and approval marksElectronic transformers from Tridonic are ENECcertified, carry the CE mark and meet all the European as well as international standards relating to safety,operation and electro-magnetic compatibility (EMC).
Technical informationThe latest technical information is available on theinternet at: www.tridonic.com, menu “Technical data”, submenu “Data sheets”
Personal enquiriesA form for personal enquiries is available onthe internet at: www.tridonic.com, menu “Contact”,submenu “Contact form”
TE speedy
Halogen transformersProduct information
www.tridonic.com 373Catalogue 2014
Halogen transformersElectronic
Elec
troni
c tra
nsfo
rmer
s
Product description
• Compact dimensions
• Short-circuit shutdown feature with automatic restart
• Overtemperature and overload protection with power regulation
• Large connection compartment
• Double assignment of the terminal possible
• Cage clamp terminals for rigid and flexible wires
• Double terminals on the secondary side
• Rapid installation of cable clamp and terminal cover,
no tool required
• Casing: polycarbonate, dark blue/white
• Not suitable for operation with MR16 LED bulbs
N For product data sheet go to www.tridonic.com,
or available on request
Technical dataMains voltage range 230 – 240 VMains frequency 50 / 60 HzDimming Leading-edge and trailing-edge phase controlSoft-start < 1 sλ > 0.95Efficiency > 93 %Max. cable length secondary 2 mProtection class IIType of protection IP20
LProduct / function matrix, page 370
Wiring diagrams and installation examples, page 381
TE speedyDimming via leading-edge and trailing-edge phase dimmers
51
101,5
29,5
Ordering data
Type Article number Packaging, carton
Packaging,low volume
Weightper pc.
TE-0050 C101 24034855 20 pc(s). 1,000 pc(s). 0.101 kgTE-0070 C101 24034868 20 pc(s). 1,000 pc(s). 0.100 kgTE-0105 C101 24034874 20 pc(s). 1,000 pc(s). 0.122 kg
Specific technical dataType Article
numberDimensionsL x W x H
Lamppower
Rated current(at 230 V, 50 Hz)
Secondary voltage 230 V
Secondary voltage 240 V
Operating frequency
Ambienttemperature ta
tc pointmax.
Secondary terminal
TE-0050 C101 24034855 101.5 x 51 x 29.5 mm 20 – 50 VA 0.215 A 11.5 V 11.7 V 60 kHz -20 ... +50 °C 85 °C 4-pinTE-0070 C101 24034868 101.5 x 51 x 29.5 mm 20 – 70 VA 0.300 A 11.5 V 11.7 V 55 kHz -20 ... +50 °C 85 °C 4-pinTE-0105 C101 24034874 101.5 x 51 x 29.5 mm 35 – 105 VA 0.450 A 11.5 V 11.7 V 40 kHz -20 ... +45 °C 85 °C 4-pin
www.tridonic.com374 Catalogue 2014
Halogen transformersElectronic
Product description
• Short-circuit shutdown feature with automatic restart
• Compact dimensions
• Overtemperature and overload protection
• Large connection compartment
• With soft start (< 1 s)
• Double assignment of the terminal possible
• Screw terminals for rigid and flexible wires
• Ground terminal for through-wiring
• Rapid installation of cable clamp and terminal cover,
no tool required
• Not suitable for operation with MR16 LED bulbs
N For product data sheet go to www.tridonic.com,
or available on request
Technical dataMains voltage range 230 – 240 VMains frequency 50 / 60 HzDimming Leading-edge and trailing-edge phase controlSoft-start < 1 sλ > 0.95Efficiency > 93 %Max. cable length secondary 2 mProtection class IIType of protection IP20
LProduct / function matrix, page 370
Wiring diagrams and installation examples, page 381
TE VIPERDimming via leading-edge and trailing-edge phase dimmers
Ordering data
Type Article number Packaging, carton
Packaging,low volume
Packaging,high volume
Weightper pc.
TE VIPER 60 VA 22176072 20 pc(s). 280 pc(s). 3,920 pc(s). 0.102 kgTE VIPER 105 VA 22176074 20 pc(s). 220 pc(s). 3,080 pc(s). 0.127 kg
Specific technical dataType Article
numberDimensionsL x W x H
Lamppower
Rated current (at 230 V,
50 Hz)
Secondary voltage 230 V
Secondary voltage 240 V
Operating frequency
Ambienttemperature
ta
tc point max.
Secondary terminal
Max. torque terminal block
Terminaldiameter oneach pole
Stripping length (primary/sec-
ondary)
Output terminal
TE VIPER 60 VA 22176072 120 x 40 x 29 mm 20 – 60 VA 0.26 A 11.3 V 11.6 V 55 kHz 0 ... +50 °C 70 °C 2-pin 0.4 Nmmax. 2.5 mm²min. 1.5 mm²
8 mm 2-pin
TE VIPER 105 VA 22176074 141 x 40 x 29 mm 35 – 105 VA 0.45 A 11.0 V 11.5 V 45 kHz 0 ... +45 °C 85 °C 4-pin 0.4 Nmmax. 2.5 mm²min. 1.5 mm²
8 mm 4-pin
www.tridonic.com 375Catalogue 2014
Halogen transformersElectronic
Elec
troni
c tra
nsfo
rmer
s
Product description
• Short-circuit shutdown feature with automatic restart
• Compact dimensions
• Overtemperature and overload protection
• Large connection compartment
• With soft start (< 1 s)
• Double assignment of the terminal possible
• Screw terminals for rigid and flexible wires
• Ground terminal for through-wiring
• Cable, secondary: silicon insulated 60 – 180 °C,
2 x 1.5 mm², 0.5 m
• Rapid installation of cable clamp and terminal cover,
no tool required
• Not suitable for operation with MR16 LED bulbs
N For product data sheet go to www.tridonic.com,
or available on request
Technical dataMains voltage range 230 – 240 VMains frequency 50 / 60 HzDimming Leading-edge and trailing-edge phase controlSoft-start < 1 sλ > 0.95Max. cable length secondary 2 mProtection class IIType of protection IP20
LProduct / function matrix, page 370
Wiring diagrams and installation examples, page 381
TE VIPER, with cableDimming via leading-edge and trailing-edge phase dimmers
Ordering data
Type Article number Packaging, carton
Packaging,low volume
Packaging,high volume
Weightper pc.
VIPER 60 VA 22176150 20 pc(s). 220 pc(s). 2,860 pc(s). 0.122 kgVIPER 105 VA 22176181 20 pc(s). 200 pc(s). 2,600 pc(s). 0.148 kg
Specific technical dataType Article
numberDimensionsL x W x H
Lamppower
Rated current (at 230 V,
50 Hz)
Secondary voltage 230 V
Secondary voltage 240 V
Operating frequency
Ambienttemperature
ta
tc point max.
Max. torque terminal block
Terminaldiameter oneach pole
Stripping length (primary/sec-
ondary)
Output terminal
VIPER 60 VA 22176150 120 x 40 x 29 mm 20 – 60 VA 0.26 A 11.3 V 11.6 V 55 kHz 0 ... +50 °C 70 °C 0.4 Nmmax. 2.5 mm²min. 1.5 mm²
8 mm Cable 0.5 m
VIPER 105 VA 22176181 141 x 40 x 29 mm 35 – 105 VA 0.45 A 11.0 V 11.5 V 45 kHz 0 ... +45 °C 85 °C 0.4 Nmmax. 2.5 mm²min. 1.5 mm²
8 mm Cable 0.5 m
www.tridonic.com376 Catalogue 2014
Halogen transformersElectronic
Product description
• Nominal life time of 30,000 h (at ta max. 50 °C
with a failure rate ≤ 0.2 % per 1,000 h)
• Compact dimensions
• Screw terminals for rigid and flexible wires
• Inbuilt transformer
• Able to drive any low-voltage lamp
on the market up to max. 60 W
• Coloured single packaging (optional)
• Short-circuit shutdown feature with automatic restart
• Overload protection
N For product data sheet go to www.tridonic.com,
or available on request
Technical dataMains voltage range 220 – 240 VMains frequency 50 / 60 HzDimming Leading-edge and trailing-edge phase controlSoft-start < 1 sLife time 30,000 hλ > 0.95Efficiency > 92 %Max. cable length secondary 2 mProtection class IIType of protection IP20
LProduct / function matrix, page 370
Wiring diagrams and installation examples, page 381
TE BASICDimming via leading-edge and trailing-edge phase dimmers
Fig. 1
Fig. 2
20
100 32
Ordering data
Type Article number Fig. Packaging, carton
Packaging,low volume
Packaging,high volume
Weightper pc.
TE-0060 BASIC 101 fly lead 22176494 1 400 pc(s). 3,600 pc(s). 7,200 pc(s). 0.059 kgTE-0060 BASIC 111 screw terminal 22176495 2 400 pc(s). 1,600 pc(s). 8,000 pc(s). 0.051 kg
Specific technical dataType Article
numberDimensionsL x W x H
Lamppower
Rated current(at 230 V,
50 Hz)
Secondary voltage 230 V
Secondary voltage 240 V
Operating frequency
Ambienttemperature
ta
tc point max.
Max. torque pri-mary / secondary
terminal block
Primaryconnection
Secondaryconnection
TE-0060 BASIC 101 22176494 100 x 32 x 20 mm 20 – 60 VA 0.09 – 0.28 A 11.6 V 12 V 45 kHz 0 ... +50 °C 90 °C –2 leads AWG 20,
length: 60 mm2 leads AWG 18,length: 140 mm
TE-0060 BASIC 111 22176495 100 x 32 x 20 mm 20 – 60 VA 0.09 – 0.28 A 11.6 V 12 V 45 kHz 0 ... +50 °C 90 °C 0.5 Nm / M2.6Max. cross section of
1 x 1.5 mm²stranded / solid wire
Max. cross section of1 x 1.5 mm²
stranded / solid wire
www.tridonic.com 377Catalogue 2014
Halogen transformersElectronic
Elec
troni
c tra
nsfo
rmer
s
Product description
• Independent device with integrated cable clamp and terminal cover
• Constant output voltage
• Short-circuit shutdown feature with automatic restart
• 6 or 8-pole terminal on secondary side
• Primary-side through-wiring
• Practical individual packaging with assembly instructions
• Rapid installation of the cable clamp, no tools required
• Not suitable for operation with MR16 LED bulbs
N For product data sheet go to www.tridonic.com,
or available on request
Technical dataMains voltage range 230 – 240 VMains frequency 0 / 50 / 60 HzDimming Leading-edge and trailing-edge phase controlSoft-start < 1 sλ > 0.95Efficiency > 93 %Max. cable length secondary 2 mProtection class IIType of protection IP20
LProduct / function matrix, page 370
Wiring diagrams and installation examples, page 381
TE 0105Dimming via leading-edge and trailing-edge phase dimmers
Ordering data
Type Article number Packaging, carton
Packaging,low volume
Weightper pc.
TE-0105 C201 89899857 20 pc(s). 1,000 pc(s). 0.158 kg
Specific technical dataType Article
numberDimensionsL x W x H
Hole spacingD
Lamppower
Rated current(at 230 V, 50 Hz)
Secondary voltage 230 V
Secondary voltage 240 V
Operating frequency
Ambienttemperature ta
tc point max.
Secondary terminal Output terminal
TE-0105 C201 89899857 167 x 42 x 31 mm 143 – 148 mm 35 – 105 VA 0.45 A 11.5 V 11.7 V 40 kHz -25 ... +45 °C 85 °C 6-pin screw terminal 6-pin screw terminal
www.tridonic.com378 Catalogue 2014
Halogen transformersElectronic
Product description
• Independent device with integrated cable clamp and terminal cover
• Dimming range 1 to 100 %
• For emergency lighting systems as per EN 50172
• Short-circuit shutdown feature with automatic restart
• With soft start
• Noise-free precise control via one4all-interface
DALI, DSI, switchDIM or corridorFUNCTION
• Fault reporting and programmable operating
parameters in DALI and DSI mode
• Intelligent Temperature Guard (overtemperature protection)
• Rapid installation of cable clamp and terminal cover,
no tool required
• 6-pole terminal on secondary side
• Cage-type screw terminal
• Practical individual packaging with assembly instructions
• Not suitable for operation with MR16 LED bulbs
N For product data sheet go to www.tridonic.com,
or available on request
Technical dataMains voltage range 220 – 240 VDC voltage range 176 – 280 VMains frequency 0 / 50 / 60 HzDimming DSI, DALI, switchDIM – single momentary-
action switchSoft-start yesλ > 0.95Efficiency > 95 %Stand-by power < 0.5 WMax. cable length secondary 2 mProtection class IIType of protection IP20
LProduct / function matrix, page 370
Wiring diagrams and installation examples, page 381
TE 0105 one4all scDigital dimmable
Ordering data
Type Article number Packaging, carton
Packaging,low volume
Weightper pc.
TE-0105 one4all sc 86459198 20 pc(s). 800 pc(s). 0.184 kg
Specific technical dataType Article
numberDimensionsL x W x H
Hole spacingD
Lamppower
DC lamp output
Rated current(at 230 V, 50 Hz)
Secondary voltage �
Operating frequency
Ambienttemperature ta
tc point max.
Secondary terminal
TE-0105 one4all sc 86459198 167 x 42 x 31 mm 143 – 148 mm 20 – 105 VA 70 % 0.43 A 11.5 V 33 kHz -25 ... +55 °C 90 °C 6-pin� Constant output voltage.
www.tridonic.com 379Catalogue 2014
Halogen transformersElectronic
Elec
troni
c tra
nsfo
rmer
s
Product description
• Independent device with integrated cable clamp and terminal cover
• Dimming range 1 to 100 %
• For emergency lighting systems as per EN 50172
• Short-circuit shutdown feature with automatic restart
• With soft start
• Noise-free precise control via one4all-interface
DALI, DSI, switchDIM or corridorFUNCTION
• Fault reporting and programmable operating
parameters in DALI and DSI mode
• Overtemperature and overload protection
by reducing power and automatic restart
• Load range 50 – 150 VA
• Primary-side through-wiring
• 8-pole terminal on secondary side
• Practical individual packaging with assembly instructions
• Not suitable for operation with MR16 LED bulbs
N For product data sheet go to www.tridonic.com,
or available on request
Technical dataMains voltage range 230 – 240 VDC voltage range 176 – 280 VMains frequency 0 / 50 / 60 HzDimming DSI, DALI, switchDIM – single
momentary-action switchSoft-start yesλ > 0.95Efficiency > 95 %Stand-by power < 1.2 WMax. cable length secondary 2 mProtection class IIType of protection IP20
LProduct / function matrix, page 370
Wiring diagrams and installation examples, page 381
TE 0150 one4all scDigital dimmable
LD
B
H H
B
Ordering data
Type Article number Packaging, carton
Packaging,low volume
Weightper pc.
TE-0150 one4all sc 86457874 10 pc(s). 600 pc(s). 0.293 kg
Specific technical dataType Article
numberDimensionsL x W x H
Hole spacingD
Lamppower
DC lamp output
Rated current(at 230 V, 50 Hz)
Secondary voltage �
Operating frequency
Ambienttemperature ta
tc point max.
Output terminal
TE-0150 one4all sc 86457874 207 x 46 x 40 mm 170 – 174 mm 50 – 150 VA 70 % 0.61 A 11.8 V 33 kHz -25 ... +50 °C 90 °C 8-pin spring terminal� Constant output voltage.
www.tridonic.com380 Catalogue 2014
Halogen transformersElectronic
Product description
• Dimming range 1 to 100 %
• For emergency lighting systems as per EN 50172
• Compact design for luminaire installation
• Short-circuit shutdown feature with automatic restart
• With soft start
• Noise-free precise control via one4all-interface
DALI, DSI, switchDIM or corridorFUNCTION
• Fault reporting and programmable operating
parameters in DALI and DSI mode
• Overtemperature and overload protection
by reducing power and automatic restart
• 2-pole output terminal
• Not suitable for operation with MR16 LED bulbs
N For product data sheet go to www.tridonic.com,
or available on request
Technical dataMains voltage range 230 – 240 VDC voltage range 176 – 280 VMains frequency 0 / 50 / 60 HzDimming DSI, DALI, switchDIM – single
momentary-action switchSoft-start yesλ > 0.95Efficiency > 95 %Max. cable length secondary 2 mProtection class IIType of protection IP20
LProduct / function matrix, page 370
Wiring diagrams and installation examples, page 381
TE 0105 one4all ccDigital dimmable
103 67
93,54,5
6757,5
531
Ordering data
Type Article number Packaging, carton
Packaging,low volume
Weightper pc.
TE-0105 one4all cc 86456435 15 pc(s). 900 pc(s). 0.15 kg
Specific technical dataType Article
numberDimensionsL x W x H
Hole spacingD
Lamppower
DC lamp output
Rated current(at 230 V, 50 Hz)
Secondary voltage �
Operating frequency
Ambienttemperature ta
tc point max.
Output terminal
TE-0105 one4all cc 86456435 103 x 67 x 31 mm 91.5 – 95.5 mm 20 – 105 VA 70 % 0.4 A 11.8 V 33 kHz -25 ... +60 °C 90 °C 2-pin� Constant output voltage.
www.tridonic.com 381Catalogue 2014
Halogen transformersWiring diagrams and installation examples
Elec
troni
c tra
nsfo
rmer
s
trailing-edgephase dimmer
TE 0105: leading-edge and trailing-edge phase dimmer
trailing-edgephase dimmer
TE speedy / TE VIPER / TE BASIC: leading-edge and trailing-edge phase dimmer
TE one4all sc: wiring diagram switchDIM TE one4all sc: wiring diagram DALI / DSI
max. 105 VA max. 105 VA
TE one4all cc: wiring diagram switchDIM TE one4all cc: wiring diagram DALI / DSI