Hamburg · Germany
SHAPES & PARTS
High Performance Polymers
PEEK-shop.de
PEEK (Polyetheretherketone)• Permanent Temperature Resistance Up to 240°C• Natural and Compounds (CF, GF, PTFE, graphite, etc.)• Extruded, injection molded, hot compression molded • Tribologically modifi ed PEEK• Tubes with a wide range of dimensions OD: 25 – 2500 mm
Meldin® Thermoset Polyimide (Made in USA)• Permanent Temperature Resistance up to 315°C• Short-term Temperature Resistance up to 482°C• Modifi ed grades
PAI (Polyamideimide)• Permanent Temperature Resistance up to 270°C • Excellent abrasion resistance at temperatures up to 200°C• Superior mechanical strength at elevated temperatures
PEI (Polyetherimide)• Permanent Temperature Resistance Up to 170°C• Stable electrical properties over a wide range of frequencies• Excellent chemical resistance and ductile properties• Great machinability with high strength and rigidity
Boost your performance with a wide range of HPP-products for CNC-machining. High temperature resistant rods and tubes, sourced globally from leading producers, highest quality paired with competitive prices.
The Classic Rods and Tubes
Ro
ds &
Tub
es
Fila
ments
& T
hin
Tubes
The rods and tubes offered by BIEGLO possess high dimensional stability along with a strong chemical resistance at elevated temperatures.
Thin and Highly Performant
PEEK-shop.de
PEEK• Monofi lament, aslo 3D-Prnting• Multifi lament • Chopped fi bers• Compound Filament• Wide range of diameters• Medical Thin Tubes• Shrink Tubes
Polyimide• Multifi lament• Monofi lament, also 3D-Printing• Compound Filament• Wide range of diameters• Staple Fibers and tissues
Thermoplastic fi laments can be used in growth markets as composite products and 3D-printing; they also play an important role in fi ltration and protection.
Thin polymer tubes fi nd their usage in medical and electronic applications. Insulation, protection and the transport of fl uids can be their purpose.
Fila
ments
& T
hin
Tubes
Fin
shed
Part
s
BIEGLO offers extruded or spun fi bers and thin tubes for the most advanced applications as reinforce-ment, insulation or structural support.BIEGLO works with specialized producers from around the world to provide state of the art fi ber and thin tube products produced from HighPerformance Polymers.
Made to order – easy solution
Fin
shed
Part
s
PEEK-shop.de
PEEK (Polyetheretherketone)• Permanent Temperature up to 240°C• CNC machined• Injection and Compression Molded• 3D printed
Sealings, Back-up rings, Gears, Isolators
Meldin® Thermosetting Polyimide (Made in USA)• Permanent Temperature Resistance up to 315°C• Direct formed• CNC machined
Hot-runner nozzles, Plasma-cutting diffusor, washers
TPI (Thermoplastic Polyimide) • Permanent Temperature up to 245°C • Injection molded• CNC machined• 3D-printed
Dry bearings, Ball-bearing cages, thrust washer
PAI (Polyamideimide) • Permanent Temperature Resistance up to 270°C • Superior mechanical strength at elevated temperatures• Injection molded • CNC machined
Gears, bearings, washers
PEI (Polyetherimide)• Permanent Temperature Resistance Up to 170°C• CNC machined• Injection molded• 3D-printed
All types of fi nished parts can be produced from natural or compounded polymers. Through our large network of specialist-converters we can offer the best solutions made of multiple production techniques.
BIEGLO tries to fulfi l multiple needs and reach many industry sectors with a wide range of fi nished parts on offer. BIEGLO shares the passion for HPP-parts with many niche producers that support the developments of our customers with tailor-made solutions.
PEEK-shop.de
Sheet
& F
ilmUnique Solutions in Sheets & Film
AS PP L A S T I C S
ASP-Plastics specializes in sheet- and fi lm-solutions: Flame retardant thermoformable sheets up to 9,5 mm and protective fi lms starting from 50 µ thickness
ASP-Plastics offers BOPP Protection Release fi lm, PVDF-anti-Grafi ti-fi lm and other fi lm-products to customer demand. ASP Plastics – founded in 2010part of the BIEGLO-Group
Korad - Film• PMMA Decorative and Protection fi lms• PVC Decorative fi lms• PVC Tuf Decorative fi lms
PVC/PMMA - Film • Decorative and Protection fi lms
Royalite – Sheet• Thermoformable sheets • PMMA sheets
Cast Acrylic-sheet• Laser-protection• Bulletproof transparent sheets
High-tech industries require performing isolation from temperatures and chemicals: HPP-fi lms can provide solutions. BIEGLO offers fi lms with a wide range of thicknesses made from HPPs such as PEEK, thermoset and thermoplastic Polyimide, PAI and PEI: fi lms from 6µ up to 1.500µ. Experienced fi lm-extruders supply solutions from natural or compounded polymers.
Sheets are used in thermoforming or cut as seals, frames and membranes.
Unique Solutions in Sheets & Film
BIEGLO is a Hamburg based distribution company specialized in
high performance polymers and sustainable thermoplastics.
Besides sales and marketing BIEGLO offers consulting in material
choices, processing methods and product development.
BIEGLO is committed to long-term developments of technical
products and is the distribution-partner of polymer producers
that trust in BIEGLOs ability to provide services in areas ranging
from technical advice to fi nancing, logistics, purchasing and
product-development.
High Performance Distribution
CoPEEK
BIEGLO GmbH Bahrenfelder Strasse 242 · 22765 Hamburg Germany
+ 49 40 4011 30000 www.bieglo.com · [email protected]
PEEK-shop.de
Contact: [email protected]
AS PP L A S T I C S
C o n s u l t i n g
09 | 2019
Hamburg · Germany
High Performance Polymers
POWDERS & GRANULES
CoPEEK
PEEK (Polyetheretherketone)• high purity natural grades• dedicated production plant• 1.000 mt annual capacity• powder and granules• various viscosities
PEEK-shop.de
PEEK Compounds• PEEK mod 10-10-10• PEEK CF• PEEK GF• PEEK PTFE• PEEK colors
PEEK-shop.de
R-PEEK (Secondary Polyetheretherketone)
• R-PEEK Natural Granules• R-PEEK Compound Granules• Regrind PEEK Natural and Compound• Shavings
Our Classic: PEEK
PE
EK
Perf
orm
ance o
f H
PP
sBIEGLO supports your developments and advises on materials, recycling, and processing.BIEGLO offers high quality PEEK granules, and powders with uniform particle distribution suitable for coating, compounding, injection molding, extrusion and compression molding applications.
As metal-replacement: when all others have failed. PEEK is the high-temperature material of choice, when chemical resistance and harsh environments have to be mastered.
Performance of HPPs
Tensile strength of HPPs at elevated temperatures is the key material selection factor to be considered for hightemperature load bearing applications.
In addition to high HDT values, the HPP material should possess a low level of water absorption with suffi cient dimensional stability to be used for harsh, hot and humid applications.
Long-term service temperature and tensile strength distinguish TPI, PEEK and PEI from other engineering plastics.
BIEGLO focuses on high-temperature applications.PEEK is the standard HPP. Thermosetting Polyimide (PI-s) is the top-performer when it comes to heat defl ection temperature (HDT). With PAI, TPI and PEI, BIEGLO is fi lling the gap between PEEK and PI-s.
Perf
orm
ance o
f H
PP
s
PA
I & P
EI
For every application a multitude of parameters should be considered: HDT and Tensile strength are the basis – water absorption, fl exural strength, friction & wear, resistance to chemicals and electrical properties must also be taken into account.
PEI
°C MPa
TPI
°C MPa
PEEK
°C MPa
PPS
°C MPa
PPSU
°C MPaHDT WA HDT WA HDT WA HDT WA HDT WA
Tens
ile S
tren
gth
(MP
a)
Long
-ter
m S
ervi
ce T
empe
ratu
re (°
C)
Tens
ile S
tren
gth
(MP
a) a
t 23°
C
Working Temperature (°C)
PI-sH
DT@
1.8
MP
a (°
C)
Wat
er A
bsor
ptio
n (W
A) 2
4 hr
s
ARUM®TPI
PAI
PEEK
100
50
120 160 200 240 290
200
300
400
100
0
200
300
100
0
80
120
40
0
0.2
0.3
0.1
PI-s PAI TPI PEI PEEK
PEI
°C MPa
TPI
°C MPa
PEEK
°C MPa
PPS
°C MPa
PPSU
°C MPaHDT WA HDT WA HDT WA HDT WA HDT WA
Tens
ile S
tren
gth
(MP
a)
Long
-ter
m S
ervi
ce T
empe
ratu
re (°
C)
Tens
ile S
tren
gth
(MP
a) a
t 23°
C
Working Temperature (°C)
PI-sH
DT@
1.8
MP
a (°
C)
Wat
er A
bsor
ptio
n (W
A) 2
4 hr
s
ARUM®TPI
PAI
PEEK
100
50
120 160 200 240 290
200
300
400
100
0
200
300
100
0
80
120
40
0
0.2
0.3
0.1
PI-s PAI TPI PEI PEEK
PEI
°C MPa
TPITPI
°C MPa °C
PEEK
°C MPa
PPS
°C MPa
PPSU
°C MPaHDT WA HDT WA HDT WA HDT WA HDT WA
Tens
ile S
tren
gth
(MP
a)
Long
-ter
m S
ervi
ce T
empe
ratu
re (°
C)
Tens
ile S
tren
gth
(MP
a) a
t 23°
C
Working Temperature (°C)
PI-s
HD
T@1.
8 M
Pa
(°C
)
Wat
er A
bsor
ptio
n (W
A) 2
4 hr
s
ARUM®TPI
PAI
PEEK
100
50
120 160 200 240 290
200
300
400
100
0
200
300
100
0
80
120
40
0
0.2
0.3
0.1
PI-s PAI TPI PEI PEEK
Imide-alloys – Niche Products
PA
I & P
EI
BIEGLO offers PAI and PEI granules and powders for demanding applications such as automotive transmission components, aerospace thermal isolators, gears or semiconductor test sockets.
PAI Granules & Powders• Glass/carbon fi ber reinforced PAIs as critical metal
replacement parts • High temperature resistance, chemical resistance,
and mechanical strength• Excellent wear resistance at low and high velocities• Suitable for high temperature devices with
minimum wear rate and self-lubrication
PEI Granules • Continuous service temperature of 170°C • Excellent dimensional accuracy • Low thermal expansion• PEI is naturally fl ame-retardant UL94 V-0• High strength and rigidity at elevated temperatures• High creep resistance• Good electrical properties
PEI Recycled• Regrind PEI Natural • Regrind PEI Compound• Competitive Prices
To satisfy the growing demand for high performing niche-products BIEGLO offers PAI and PEI under its own brand DEXNYL™.
AURUM® Thermoplastic Polyimide• Melt-processable• Super-high heat resistance (Tg 245 °C)• Great sliding properties• Outstanding dimensional stability• Exceptionally clean (trace amount of
outgas and metallic impurities)
Dexnyl© 185 Thermoplastic PI • Granules and Powders• Very high heat resistance (Tg 185 C)• Melt-processable with good melt
fl ow as it has crystalline• Higher mechanical strength than PEEK at
above 120 °C
Dexnyl© Thermoset PI Powder • Ultra-high heat resistance (HDT 330 °C)• non-toxic fi re retardant material• self-lubricant and wear resistant
Po
lyim
ides
When the temperature performance of PEEK is not satisfying, TPI could be the solution. Polyimide ensures strong tribological performance in extreme environments. Polyimide serves as base-material or as an additive.
The Top of the Thermoplastic-Pyramid
BIEGLO offers different grades of thermoplastic PI (TPI) and thermoset PI (PI-s) powders and granules for the most demanding high temperature applications.
The Top of the Thermoplastic-Pyramid
BIEGLO is a Hamburg based distribution company specialized in
high performance polymers and sustainable thermoplastics.
Besides sales and marketing BIEGLO offers consulting in material
choices, processing methods and product development.
BIEGLO is committed to long-term developments of technical
products and is the distribution-partner of polymer producers
that trust in BIEGLOs ability to provide services in areas ranging
from technical advice to fi nancing, logistics, purchasing and
product-development.
High Performance Distribution
CoPEEK
BIEGLO GmbH Bahrenfelder Strasse 242 · 22765 Hamburg Germany
+ 49 40 4011 30000 www.bieglo.com · [email protected]
PEEK-shop.de
Contact: [email protected]
AS PP L A S T I C S
C o n s u l t i n g
09 | 2019