0
S A T U R D A Y , J U L Y 1 2 , 2 0 0 8
BackupPC on FreeNAS
Please see also BackupPC on FreeNAS - Part2 and BackupPC on FreeNAS - Part 3 (Issues with Samba)...
As I am a big fan of BackupPC, I'd like to have this piece of software on myFreeNAS-Server. Here is the way how I did the installation.
As I need some help to improve this way how I've done the installation... Please leave me a comment...
BTW: This more than a alpha-stadium for this instructions.
I am using a full installation of FreeNAS 0.7. I like ZFS ;-)
It is necessary to install several Packages
freenas:~# setenv PACKAGESITEftp://ftp.de.freebsd.org/pub/FreeBSD/ports/YOUR_ARCHITECTURE/packages-7.0-release/freenas:~# pkg_add -r perl5/perl-5.8.8_1Fetchingftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/packages-7.0-release/perl5/perl-5.8.8_1.tbz... Done.Removing stale symlinks from /usr/bin... Skipping /usr/bin/perl Skipping /usr/bin/perl5Done.Creating various symlinks in /usr/bin... Symlinking /usr/local/bin/perl5.8.8 to /usr/bin/perl Symlinking /usr/local/bin/perl5.8.8 to /usr/bin/perl5Done.cd: can't cd to /usr/includeCleaning up /etc/make.conf... Done.Spamming /etc/make.conf... Done.Cleaning up /etc/manpath.config... Done.Spamming /etc/manpath.config... Done.freenas:~# pkg_add -r perl5/p5-Compress-Raw-Zlib-2.006Fetchingftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/packages-7.0-release/perl5/p5-Compress-Raw-Zlib-2.006.tbz... Done.freenas:~# pkg_add -r perl5/p5-Archive-Zip-1.20Fetchingftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/packages-7.0-release/perl5/p5-Archive-Zip-1.20.tbz...Done.Fetchingftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/packages-7.0-release/All/p5-File-Which-0.05.tbz...Done.Fetchingftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/pac
S E A R C H
Search
F L A T T R
4
L A B E L S
apple (5)
backuppc (3)
benchmark (8)
bittorrent (19)
flattr (1)
freebsd (1)
freenas (48)
general (5)
internet (1)
ipv6 (1)
linux (2)
m0n0wall (1)
nexenta (2)
opensolaris (5)
qnap (1)
tuning (4)
zfs (14)
B L O G A R C H I V E
► 2011 (2)
► 2010 (8)
► 2009 (32)
▼ 2008 (15)
► December (2)
► October (3)
► September (1)
Partilhar Denunciar abuso Blogue seguinte» Criar blogue Iniciar sessão
H A R R Y D
Página 1 de 14harryd: BackupPC on FreeNAS
22-08-2011http://harryd71.blogspot.com/2008/07/backuppc-on-freenas.html
kages-7.0-release/All/p5-Scalar-List-Utils-1.19,1.tbz... Done.Fetchingftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/packages-7.0-release/All/p5-PathTools-3.25.tbz...Done.Fetchingftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/packages-7.0-release/All/p5-File-Temp-0.18.tbz...Done.Fetchingftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/packages-7.0-release/All/p5-IO-Compress-Base-2.006.tbz... Done.Fetchingftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/packages-7.0-release/All/p5-IO-Compress-Zlib-2.006.tbz... Done.Fetchingftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/packages-7.0-release/All/p5-Compress-Zlib-2.007.tbz...Done.freenas:~# pkg_add -r perl5/p5-File-RsyncP-0.68Fetchingftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/packages-7.0-release/perl5/p5-File-RsyncP-0.68.tbz...Done.Fetchingftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/packages-7.0-release/All/p5-Getopt-Long-2.36.tbz...Done.Fetchingftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/packages-7.0-release/All/p5-Encode-2.23.tbz... Done.freenas:~# pkg_add -r net/samba-libsmbclient-3.0.28Fetchingftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/packages-7.0-release/net/samba-libsmbclient-3.0.28.tbz... Done.Fetchingftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/packages-7.0-release/All/libiconv-1.11_1.tbz... Done.freenas:~# pkg_add -r net/samba-nmblookup-3.0.28.tbzFetchingftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/packages-7.0-release/net/samba-nmblookup-3.0.28.tbz...Done.freenas:~# pkg_add -r net/samba-3.0.28Error: FTP Unable to getftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/packages-7.0-release/net/samba-3.0.28.tbz: File unavailable (e.g., file not found, no access)pkg_add: unable to fetch'ftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/packages-7.0-release/net/samba-3.0.28.tbz' by URLfreenas:~# pkg_add -r net/samba-3.0.28,1Fetchingftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/packages-7.0-release/net/samba-3.0.28,1.tbz... Done.Fetchingftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/packages-7.0-release/All/openldap-client-2.3.41.tbz...Done.
************************************************************
► August (5)
▼ July (4)
BackupPC on FreeNAS - Part 2
Folding at Home Benchmark
BackupPC on FreeNAS
FreeNAS 0.7 on my testserver
S U B S C R I B E N O W
Subscribe
F R E E N A S T O R R E N T S
B U T T O N S
Bookmark this on Delicious
T W I T T E R U P D A T E S
@holgi NFSW26 und die Diskussion
über 'Das ist so schlecht...'. Recht
hast Du! --> 'Das ist so schlecht,
dass es schon wieder schlecht ist'
97 days ago
Flattr is updating. Good Luck!
http://t.co/O3e8RUK &
http://t.co/FHBPSDk
http://t.co/qmvn6Fd 98 days ago
follow me on Twitter
Página 2 de 14harryd: BackupPC on FreeNAS
22-08-2011http://harryd71.blogspot.com/2008/07/backuppc-on-freenas.html
The OpenLDAP client package has been successfully installed.
Edit/usr/local/etc/openldap/ldap.conf
to change the system-wide client defaults.
Try `man ldap.conf' and visit the OpenLDAP FAQ-O-Matic at
http://www.OpenLDAP.org/faq/index.cgi?file=3for more information.
************************************************************
Fetchingftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/packages-7.0-release/All/png-1.2.22.tbz... Done.Fetchingftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/packages-7.0-release/All/jpeg-6b_4.tbz... Done.Fetchingftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/packages-7.0-release/All/tiff-3.8.2_1.tbz... Done.Fetchingftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/packages-7.0-release/All/pkg-config-0.22_1.tbz...Done.Fetchingftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/packages-7.0-release/All/libexecinfo-1.1_1.tbz...Done.Fetchingftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/packages-7.0-release/All/gettext-0.16.1_3.tbz... Done.install-info: not foundpkg_add: command 'install-info --quiet /usr/local/info/autosprintf.info /usr/local/info/dir' failedinstall-info: not foundpkg_add: command 'install-info --quiet /usr/local/info/gettext.info /usr/local/info/dir' failedFetchingftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/packages-7.0-release/All/popt-1.7_4.tbz... Done.Fetchingftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/packages-7.0-release/All/libgpg-error-1.5.tbz... Done.Fetchingftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/packages-7.0-release/All/libgcrypt-1.2.4_1.tbz...Done.install-info: not foundpkg_add: command 'install-info --quiet /usr/local/info/gcrypt.info /usr/local/info/dir' failedFetchingftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/packages-7.0-release/All/gnutls-2.0.2_1.tbz... Done.install-info: not foundpkg_add: command 'install-info --quiet /usr/local/info/gnutls.info /usr/local/info/dir' failedFetchingftp://ftp.de.freebsd.org/pub/FreeBSD/ports/i386/packages-7.0-release/All/cups-base-1.3.5_2.tbz...Done.
Delicious/tag/freenasWindows Backup With Rsync
and FreeNAS
1 day ago
freenas - Google Blog-Search*Freenas* o.a. nich auf RW DVD
brennbar?
2 days ago
FreeNASRSS Feeds for FreeNAS 8
Forums
1 week ago
freenas | sehr beliebt | Mister Wong FeedFreeNAS is a tiny FreeBSD-based
operating system which provides
free NAS
1 month ago
Freenas BlogsInstalling FreeNAS 8 on VMware
vSphere (ESXi)
3 months ago
FrugalTechExtra Pages Printed With Word
Document
10 months ago
Project News: FreeNASFreeNAS 0.7.1 (Shere) Available
1 year ago
FreeNAS: latest newsFreeNAS 0.7 (Khasadar)
1 year ago
Digg RSS News Search for freenasTroubleshooting the FreeNAS
server
2 years ago
FreeNAS - The Open Source Network Attached Storage OSStatus of 0.7 development
3 years ago
F R E E N A S B L O G S
M Y B L O G L I S T
L I C E N S E
Página 3 de 14harryd: BackupPC on FreeNAS
22-08-2011http://harryd71.blogspot.com/2008/07/backuppc-on-freenas.html
======================================================================
To enable printing with local printer you need to give group cupsr/w access to printer device:
1) Add following to /etc/devfs.rules (create if it doesn't exist):
[system=10]add path 'unlpt*' mode 0660 group cupsadd path 'ulpt*' mode 0660 group cupsadd path 'lpt*' mode 0660 group cups
2) And following to /etc/rc.conf:
devfs_system_ruleset="system"
3) Restart devfs: /etc/rc.d/devfs restart
In case your system supoorts "devd" you can copy$PREFIX/share/exmaples/lpt-cupsd.conf into$PREFIX/etc/devd/
To enable printing under Gimp and MS-Windows clients do the following:
1) Uncomment application/octet-stream line in mime.types2) Uncomment application/octet-stream line in mime.convs3) Restart cupsd======================================================================
===============================================================================NOTICE: This version of port has changed location of Samba passwordNOTICE: (smbpasswd) directory. Files in '/usr/local/private'NOTICE: have moved to '/usr/local/etc/samba'.===============================================================================Samba3 *package* now doesn't include ADS support due the portability problemswith Kerberos5 libraries on different installations. You need to compile portyourself to get this functionality.
For additional hints and directions, please, look into the README.FreeBSD file.===============================================================================
Check the versions of tar and rsync
freenas:~# tar --versionbsdtar 2.2.5 - libarchive 2.2.4freenas:~# rsync --versionrsync version 3.0.2 protocol version 30Copyright (C) 1996-2008 by Andrew Tridgell, Wayne Davison, and others.Web site: http://rsync.samba.org/
Página 4 de 14harryd: BackupPC on FreeNAS
22-08-2011http://harryd71.blogspot.com/2008/07/backuppc-on-freenas.html
Capabilities:
64-bit files, 32-bit inums, 32-bit timestamps,
64-bit long ints,
socketpairs, hardlinks, symlinks, IPv6,
batchfiles, inplace,
append, ACLs, xattrs, iconv, symtimes, file-
flags
rsync comes with ABSOLUTELY NO WARRANTY. This is
free software, and you
are welcome to redistribute it under certain
conditions. See the GNU
General Public Licence for details.
Create a filesystem where backuppc can store all the data
freenas:~# zfs create datapool/backuppc
Download BackupPC here
Upload the software to a directory on the FreeNAS Server
Installation of BackupPC
Please see the answers below...
freenas:/mnt/space/backuppc/BackupPC-3.1.0# mkdir /usr/local/wwwfreenas:/mnt/space/backuppc/BackupPC-3.1.0# perlconfigure.pl
Is this a new installation or upgrade for
BackupPC? If this is
an upgrade please tell me the full path of the
existing BackupPC
configuration file (eg: /etc/BackupPC/config.pl).
Otherwise, just
hit return.
--> Full path to existing main config.pl []?
I found the following locations for these programs:
bzip2 =>
cat => /bin/cat
df => /bin/df
gtar/tar => /usr/bin/tar
gzip => /usr/bin/gzip
hostname => /bin/hostname
nmblookup => /usr/local/bin/nmblookup
par2 =>
perl => /usr/bin/perl
ping => /sbin/ping
rsync => /usr/local/bin/rsync
sendmail =>
smbclient => /usr/local/bin/smbclient
split =>
ssh/ssh2 => /usr/bin/ssh
--> Are these paths correct? [y]?
Please tell me the hostname of the machine that
BackupPC will run on.
--> BackupPC will run on host
[freenas.harrys.homelinux.net]?
Página 5 de 14harryd: BackupPC on FreeNAS
22-08-2011http://harryd71.blogspot.com/2008/07/backuppc-on-freenas.html
BackupPC should run as a dedicated user with limited privileges. Youneed to create a user. This user will need read/write permission onthe main data directory and read/execute permission on the installdirectory (these directories will be setup shortly).
The primary group for this user should also be chosen carefully.The data directories and files will have group read permission,so group members can access backup files.
--> BackupPC should run as user [backuppc]? root
Please specify an install directory for BackupPC. This is where theBackupPC scripts, library and documentation will be installed.
--> Install directory (full path) [/usr/local/BackupPC]?
Please specify a data directory for BackupPC. This is where all thePC backup data is stored. This file system needs to be big enough toaccommodate all the PCs you expect to backup (eg: at least several GBper machine).
--> Data directory (full path) [/data/BackupPC]? /mnt/datapool/backuppc
BackupPC can compress pool files, providing around a 40% reduction in poolsize (your mileage may vary). Specify the compression level (0 turnsoff compression, and 1 to 9 represent good/fastest to best/slowest).The recommended values are 0 (off) or 3 (reasonable compression and speed).Increasing the compression level to 5 will use around 20% more cpu timeand give perhaps 2-3% more compression.
--> Compression level [3]?
BackupPC has a powerful CGI perl interface that runs under Apache.A single executable needs to be installed in a cgi-bin directory.This executable needs to run as set-uid root, orit can be run under mod_perl with Apache running as user root.
Leave this path empty if you don't want to install the CGI interface.
--> CGI bin directory (full path) []? /usr/local/www
BackupPC's CGI script needs to display various GIF images that
Página 6 de 14harryd: BackupPC on FreeNAS
22-08-2011http://harryd71.blogspot.com/2008/07/backuppc-on-freenas.html
should be stored where Apache can serve them. They should beplaced somewhere under Apache's DocumentRoot. BackupPC alsoneeds to know the URL to access these images. Example:
Apache imagedirectory: /usr/local/apache/htdocs/BackupPC URL for image directory: /BackupPC
The URL for the image directory should start with a slash.
--> Apache image directory (full path) []? /usr/local/www/images--> URL for image directory (omit http://host; starts with '/') []? /images
Ok, we're about to:
- install the binaries, lib and docs in /usr/local/BackupPC,
- create the datadirectory /mnt/datapool/backuppc,
- create/update the config.pl file /etc/BackupPC/config.pl,
- optionally install the cgi-bin interface.
--> Do you want to continue? [y]? Created /usr/local/BackupPC/binCreated /usr/local/BackupPC/docCreated /usr/local/BackupPC/lib/BackupPC/CGICreated /usr/local/BackupPC/lib/BackupPC/ConfigCreated /usr/local/BackupPC/lib/BackupPC/LangCreated /usr/local/BackupPC/lib/BackupPC/StorageCreated /usr/local/BackupPC/lib/BackupPC/XferCreated /usr/local/BackupPC/lib/BackupPC/ZipCreated /usr/local/www/imagesCreated /mnt/datapool/backuppcCreated /mnt/datapool/backuppc/poolCreated /mnt/datapool/backuppc/cpoolCreated /mnt/datapool/backuppc/pcCreated /mnt/datapool/backuppc/trashCreated /etc/BackupPCCreated /var/log/BackupPCInstalling binaries in /usr/local/BackupPC/binInstalling library in /usr/local/BackupPC/libInstalling images in /usr/local/www/imagesMaking init.d scriptsInstalling docs in /usr/local/BackupPC/docInstalling config.pl and hosts in /etc/BackupPCInstalling cgi script BackupPC_Admin in /usr/local/www
Ok, it looks like we are finished. There are several more things youwill need to do:
- Browse through the config file, /etc/BackupPC/config.pl, and make sure all the settings are correct. In particular, you will need to set $Conf{CgiAdminUsers} so you have administration privileges in the CGI interface.
Página 7 de 14harryd: BackupPC on FreeNAS
22-08-2011http://harryd71.blogspot.com/2008/07/backuppc-on-freenas.html
- Edit the list of hosts to backup in /etc/BackupPC/hosts.
- Read the documentationin /usr/local/BackupPC/doc/BackupPC.html. Please pay special attention to the security section.
- Verify that the CGI script BackupPC_Admin runs correctly. You might need to change the permissions or group ownership of BackupPC_Admin. If this is an upgrade and you are using mod_perl, you will need to restart Apache. Otherwise it will have stale code.
- BackupPC should be ready to start. Don't forget to run it as user root! The installation also contains an init.d/backuppc script that can be copied to /etc/init.d so that BackupPC can auto-start on boot. This will also enable administrative users to start the server from the CGI interface. See init.d/README.
Enjoy!
It is necessary to change one setting in /var/etc/lighttpd.conf
Save the original file
freenas:/var/etc# cd /var/etc/freenas:/var/etc# cp lighttpd.conflighttpd.conf.orig
I have no idea how to make this setting persistent. After a reboot the change is lost...
This is what didn't work... BackupPC works like a charm,
but it is not possible to use the web interface after a reboot.
Change this row
cgi.assign = (".php" => "/usr/local/bin/php")
to this
cgi.assign = (".php" => "/usr/local/bin/php","/BackupPC_Admin" => "")
Copy the Startup-Scripts to /usr/local/etc/rc.d
freenas:/mnt/space/backuppc/BackupPC-3.1.0# cpinit.d/freebsd-backuppc /usr/local/etc/rc.d/backuppc
Set permissions in /usr/local/etc/rc.d/
I don't want that cupsd or samba will be started from here...
freenas:/mnt/space/backuppc/BackupPC-3.1.0# cd /usr/local/etc/rc.d/
Página 8 de 14harryd: BackupPC on FreeNAS
22-08-2011http://harryd71.blogspot.com/2008/07/backuppc-on-freenas.html
freenas:/usr/local/etc/rc.d# chmod 644 samba freenas:/usr/local/etc/rc.d# chmod 644 cupsd
Change a setting in /usr/local/etc/rc.d/backuppc
su backuppc -c '/usr/local/BackupPC/bin/BackupPC -d'
in
su root -c '/usr/local/BackupPC/bin/BackupPC -d'
Add the following to /etc/rc.conf
backuppc_enable="YES"
GEPOSTET VON HARRYD UNTER 11:12 PM
LABELS: BACKUPPC, FREENAS
1 9 K O M M E N T A R E :
Pablo said...
I followed all steps, but when i look for
http://local_IP_freenas/BackupPC_Admin ... the browser
offer me to download the script, instead of run it on server.
:(
JULY 17, 2008 2:24 PM
harryd said...
Have you edited /var/etc/lighttpd.conf ?
Try to restart lighty (find out the process with ps axuw, kill it
and start it again)
JULY 17, 2008 3:21 PM
Pablo said...
Página 9 de 14harryd: BackupPC on FreeNAS
22-08-2011http://harryd71.blogspot.com/2008/07/backuppc-on-freenas.html
Yes i tried. Now i've got this:
http://micromed.vc/arquivos/Picture2.png
JULY 17, 2008 4:17 PM
Pablo said...
I think the problem is in lighttpd.conf
You said:
This is what didn't work... BackupPC works like a charm, but
it is not possible to use the web interface after a reboot.
Change this row
cgi.assign = (".php" => "/usr/local/bin/php")
to this
cgi.assign = (".php" => "/usr/local/bin/php",
"/BackupPC_Admin" => "")
and this is a little different from those intructions
http://backuppc.wiki.sourceforge.net/Install+Backuppc+wit
h+Lighttpd
what can i do ?
JULY 17, 2008 9:08 PM
harryd said...
On your screenshot I can see that the BackupPC_Admin
script is running correctly. Right?
Maybe you also need to edit this /etc/BackupPC/config.pl
$Conf{CgiAdminUserGroup} = '';
$Conf{CgiAdminUsers} = '*';
The problem with the /var/etc/lighttpd.conf is, that the
Página 10 de 14harryd: BackupPC on FreeNAS
22-08-2011http://harryd71.blogspot.com/2008/07/backuppc-on-freenas.html
changes will be lost after a reboot. You are right, my setting in
lighttpd.conf is different, but it works for me...
If you want you can reach me via
JULY 17, 2008 9:56 PM
Anonymous said...
This is useful as I always wanted this to run on FreeBSD but
could never quite get it to work.
My only concern is the use of zfs which is not really stable yet
and as backups should be a conservitive setup I think I'll stick
to ufs.
Thanks for posting the how to now if someone could just
build a port/package :)
JULY 28, 2008 1:56 PM
John said...
I just finished installing backuppc on my freenas. thanks for
the awesome post.
I figured out a way to workaround the lighttpd.conf issue.
In the backuppc_start() method inside
of /usr/local/etc/rc.d/backuppc file, I added the following:
kill -9 `ps auxw | grep light | grep -v grep | awk '{print $2}'`
lighttpd -f /var/etc/lighttpd_backuppc.conf start
where lighttpd_backuppc.conf contains
the /BackupPC_Admin argument for cgi.assign.
I rebooted my machine with these changes and it works!
AUGUST 23, 2008 7:49 AM
harryd said...
Thanks John for your workaround! Maybe you've seen my
workaround here ->
http://harryd71.blogspot.com/2008/07/backuppc-on-
freenas-part-2.html this works also after a reboot.
AUGUST 23, 2008 3:30 PM
Página 11 de 14harryd: BackupPC on FreeNAS
22-08-2011http://harryd71.blogspot.com/2008/07/backuppc-on-freenas.html
Michael said...
This has been a good basis for my own exploration of
FreeNAS/BackupPC, but I have a question. I've got my set
rigged out to use the native Webserver function of FreeNAS
on port 8080 with authentication and SSL, which is what is
needed for it to work well in our context. Everything works
well, apart from the fact that I am loathe to run Backuppc as
the root user. I've tried running the server and telling it to use
a different user for rsync purposes, but that does not work. Do
you have any insight in getting Backuppc to run under a non-
root user? I've installed as 'backuppc', but as you may be
aware, the script vomits up a uid warning, saying that it is
running under uid 0 instead of xxxx. I set user under
FreeNAS in wheel and tinkered with permissions, but no luck.
DECEMBER 7, 2009 10:20 PM
harryd said...
@Michael
Unfortunately I've only set up my backuppc to run as a root
user. So, no I don't have any experience, sorry...
DECEMBER 7, 2009 10:28 PM
Michael said...
No problem, I'll keep plunking about until I get it to work. If
there is a breakthrough, I'll lay out some details here as it's
the touchstone thread for this sort of thing.
DECEMBER 8, 2009 4:04 PM
Anonymous said...
Sorry for the delay. Right now I have it working the way I
want to. All rsync commands are run as user
"backuppc" ($sshPath -q -x -l backuppc $hostIP sudo
$rsyncPath), while the server is run as user "root". My mix up
was to first use the "backuppc" users public/private key for
making a connection to the client, which fails as it is initiated
by "root". Using roots public/private key pair resolved the
issue. I've had BackupPC running over FreeNAS for four
months now without a hitch.
APRIL 26, 2010 5:08 PM
Dreamer said...
Hi !
Página 12 de 14harryd: BackupPC on FreeNAS
22-08-2011http://harryd71.blogspot.com/2008/07/backuppc-on-freenas.html
Thank you for your help, I think to use BackupPC with my
FreeNAS server will be very usefully for me.
I done all changes in my FreeNAS server, but I try to change
my lighttpd.conf file and I change it without problems, restart
my lighttpd deamon, and I can't to access to the new
configuration and when I watch again the config file
(lighttpd.con) I see that any changes are there, but they're
there when a save the file.!!!!
Could you know any tip about it?
thank's in advance.
Luis
JULY 5, 2010 3:05 PM
harryd said...
Do you've tried John's tip?
JULY 5, 2010 7:53 PM
Dreamer said...
Hi! again
Thank you for your help, I used the John's workaround
without success.
I checked with "ps -auxw|grep backuppc" command and I
haven't running any backuppc daemon.
I'll try again to install all from the begin, and then I comment
the result.
Thank's again.
JULY 6, 2010 12:25 PM
Anonymous said...
Seems to have most thing working by now, but when i try a
full backup, the following error shows up in the LOG:
Can't locate File/Listing.pm in @INC.
Do I have to install another package?
SEPTEMBER 19, 2010 2:39 PM
harryd said...
Página 13 de 14harryd: BackupPC on FreeNAS
22-08-2011http://harryd71.blogspot.com/2008/07/backuppc-on-freenas.html
Post Older PostHome
@Anonymous: I haven't used BackupPC for a long time. It
looks like you have to install the File::Listing module.
SEPTEMBER 29, 2010 9:32 PM
Anonymous said...
Has you done this on freenas-0.8 yet?
MARCH 27, 2011 10:19 PM
harryd said...
@Anonymous Sorry... No, I haven't. I am currently pretty
busy. At the moment I use a virtual machine on an ESX
Server as backuppc. I have not the 'requirement' to run
backuppc on freenas...
MARCH 28, 2011 7:48 AM
Página 14 de 14harryd: BackupPC on FreeNAS
22-08-2011http://harryd71.blogspot.com/2008/07/backuppc-on-freenas.html