Hazard•Gard® EVLL SeriesExplosionproof LED LuminairesClass I, Division 1 factory-sealedLED luminaire for general illumination
EngineeringSafety &Productivity
Hazard•Gard® EVLL Series LED Luminaires
2
The world’s most demanding environments need smart new
lighting ideas and innovative approaches to enhancing safety.
You need lighting that cuts the overall cost of ownership.
Lighting that improves energy efficiency and lives up to ever-
escalating environmental standards.
You need all of this innovation from a single source. It could
only be: Cooper Crouse-Hinds.
Introducing ESP solutions.
For more than 100 years,
Cooper Crouse-Hinds has exceeded
customer expectations when it comes to
new ideas and technological
advancements.
Today, as the electrical industry’s global leader for hazardous
environments, we continue to reach beyond the expected –
especially with our commitment to
ESP (Engineering Safety & Productivity).
The problem that never happens. That’s the goal behind ESP
– smarter, more powerful solutions engineering safety and
productivity in your world.
High-performance,high-brightness Hazard•Gard® EVLL LED Luminaire – brilliantlycombiningsafety, reliabilityandenergyefficiency.
Time to look at LEDs in a whole new light.
Dramatic advances in LED technology have broadened the
applicability of this type of illumination, creating an exciting
new option for hazardous, industrial and other highly
demanding locations. Compared to traditional incandescent
and HID technologies, LED light sources can deliver longer
life, enhanced energy efficiency, greater eco-friendliness,
lowered maintenance demands and equal or better quality of
light.
Innovative applications for this exciting technology are a
natural fit for us, and LED lighting solutions have rapidly
become an integral part of our vision.
You’re faced with high maintenance and operating costs withinyour petrochemical facility. In addition, frequent lamp failurespose a safety concern where continuous lighting is required.You’re tasked with identifying a lighting solution that reducesownership costs while maintaining similar or improved lightlevels.
Old Way: 300 pieces of conventional 400W probe start metal halideluminaires are installed throughout the facility, requiringfrequent change out of burned-out lamps and ballasts,resulting in high maintenance costs and ongoing safetyconcerns.
New Way:Install 175W Hazard•Gard® EVLL LED Luminaires to realize up to56% reduction in energy consumption and slash maintenancecosts associated with lamp replacement. The EVLL LED isdesigned to easily adapt to existing mounting modules for quickreplacement and ease of installation.
Benefit: Realize a potential $215K in energy and maintenance costsavings per year making the change to Hazard•Gard® EVLL LEDLuminaires. Utilize an environmentally-friendly lightsource by implementing Cooper Crouse-HindsLED technology.
EngineeringSafety &Productivity
Hazard•Gard® EVLL Series LED Luminaires
3
The Hazard•Gard® EVLL Series is a perfect example ofCooper Crouse-Hinds innovation.• Improve safety and productivity • Cut overall cost of ownership• Reduce energy consumption • Meet rising environmental standards
Installation and replacement made simple
Modular design - This contractor-friendly design isideal for both new construction applications and retrofit.These luminaires use the same mounting modules asexisting Hazard•Gard® Series luminaires. The quick-connect design facilitates installation - install and wire themounting module, then screw in your luminaire. Two start Acme threadsease and reduce installation time.
NEMA 4X Rated
LED Housing Assembly - The LED housing is constructed ofdurable die cast aluminum, providing an efficient thermal path tothe heat sink assembly. The impact-resistant lens is sealed from theoutside environment and provides ingress protection against waterand dust. Multi-die LED arrays are used to provide energy-efficient,long-life white light.
Safe, reliable heat transfer
Heat sink - Enhanced heat sink designprovides safe and effective heat transferfrom the LED assembly to the outsideenvironment, ensuring low LED junctiontemperature, reliability and sustainedlumen performance.
High efficiency and lumen output
Driver module assembly - High efficiency LED drivers are designed toprovide reliable operation in even the harshest environments. Various ACand DC input voltage options are available to suit virtually any driverequirement.
Optional Color Temperatures
Warm and cool white color temperaturesavailable.
Model Equivalent HID TypicalEnergy Savings
EVLL5L 100W-150W MH
EVLL7L 150W-175W HPS/MH
EVLL9L 175W-250W MH
EVLL11L 250W-400W HPS/MH
EVLL13L 400W HPS/MH PS
4
Hazard•Gard® EVLL LED offers new solutions for old challenges.
APPLICATIONS
THE EVLL LED FAMILY LED SYSTEM
Hazard•Gard® EVLL Series LED Luminaires are designed to provide
full-spectrum, crisp, white light. Five versions of the EVLL LED are
available, providing ideal solutions for a wide range of applications.
• Five lumen outputs for replacement of existing HID luminaires
• Locations requiring continuous and consistent light levels in
extreme ambient temperatures
• Areas requiring frequent on-and-off of lights
• Where flammable vapors, gases, ignitable dusts, fibers or
flyings are present; indoors or outdoors
• Where extremely corrosive, wet, dusty, hot and/or cold
conditions exist
• NEMA 4X, marine, wet locations and hose-down
environments
• Manufacturing plants; heavy industrial, chemical,
petrochemical or pharmaceutical facilities; platforms; loading
docks; tunnels; outdoor wall and stanchion mounted general
area lighting
The Class I, Division 1 Hazard•Gard® EVLL LED product offering provides the same durability and reliability of a
traditional HID fixture, coupled with the low cost of ownership and energy efficiency of Cooper Crouse-Hinds LED
technology. High-performance LEDs and a solid-state electronic driver provide light where you need it, at a
fraction of the operating costs of HID lighting technologies.
• High brightness light emitting diode (LED) arrays
• Color temperature: 3000K (CRI 82) and 5600K (CRI 65) options
available
• Advanced heat sink design ensures LED does not exceed
manufacturer’s temperature ratings across all specified
ambient conditions
• LM-79 and LM-80 reports available
Hazard•Gard® EVLL Series LED Luminaires
Up to 62%
Model VoltageInputAmps(Max.)
PowerFactor
InputPower
LumenOutput
EVLL5L 100-277VAC 50/60 Hz108-250VDC
0.46-1.820.38-1.89
0.99%1
80W 5625
EVLL7L 100-277VAC 50/60 Hz108-250VDC
0.51-1.110.42-1.15
0.99%1
100W 6750
EVLL9L 100-277VAC 50/60 Hz108-250VDC
0.61-1.190.56-1.30
0.99%1
130W 9000
EVLL11L 100-277VAC 50/60 Hz108-250VDC
0.76-1.560.73-1.71
0.99%1
151W 10500
EVLL13L 100-277VAC 50/60 Hz108-250VDC
0.78-1.580.75-1.73
0.99%1
175W 13500
NEC and CEC• Class I, Division 1, Groups B, C, D• Class I, Zone 1, Groups IIB + H2, IIB, IIA• Class II, Groups E, F, G (Pending)• Class III, Simultaneous Presence (Pending)
UL Standards• 844 Electric Fixture Hangers for Hazardous Locations• 1598 Luminaire• 1598A Luminaire for Installation on Marine Vessels
CSA Standard• C22.2 No. 137
Environmental Ratings• NEMA 4X• IP66• Marine and Wet Locations
IEC and ATEX Certifications and Protection (Pending)• Ex II 2G Ex d IIC (Zone 1, 2) (Pending)• Ex II 2D Ex tD A21 IP66 (Zone 21, 22) (Pending)
5
EVLL LED BENEFITS CERTIFICATIONS & COMPLIANCES
STANDARD MATERIALS
ELECTRICAL RATINGS
Industry best for ease of installation• Quick-connect design – install and wire the mounting
module, then simply screw in the luminaire
• Factory-sealed – no external sealing fittings required in
Groups B, C, and D
• Adapter available for connection to existing Hazard•Gard®
EVI, EVLP, and EVM modules
Reduce operation and maintenance costs• Energy-efficient – up to 62% reduction in energy used
versus equivalent HID fixtures
• 60,000 hours rated life – eliminates need for frequent lamp
replacement
Reliable performance in any environment• Shock- and vibration-resistant solid-state luminaires have
no filaments or glass components that could break – greatly
reduces the risk of premature failure
• T5 temperature rating
• Operating ambient -25ºC to 65ºC
• Body and mounting modules – copper-free aluminum with
Corro-free™ epoxy powder coat
• Lens – shatter-resistant, explosionproof glass
• Gaskets – silicone
• Guard – stainless steel
• External hardware – stainless steel
• Factory-sealed*
*Refer to Installation and Maintenance Sheet for external seal requirements.
EngineeringSafety &Productivity
Hazard•Gard® EVLL Series LED Luminaires
SERIESEVLL Explosionproof Vaportight Low Profile LED Luminaire
LAMP OUTPUT5L 5,625 Lumen Output7L 6,750 Lumen Output9L 9,000 Lumen Output11L 10,500 Lumen Output13L 13,500 Lumen Output
LED COLORC Cool (5600K nominal)W Warm (3000K nominal)
MOUNTING MODULEA Pendant EVSP J Stanchion EVSJBX Wall Bracket EVSW M Mounting Module Adapter EVSA (See Note #1)CX Ceiling Mount EVSC Blank No Mounting Module Supplied
HUB SIZE 2 3⁄4” NPT (Pendant, Ceiling, and Wall Only)3 1” NPT (Pendant, Ceiling, and Wall Only)5 1 1⁄2” NPT (Stanchion Only)25 25 mm (Pendant, Ceiling, and Wall Only)32 32 mm (Pendant, Ceiling, and Wall Only)Blank Leave Blank For Mounting Module Adapter and No Mounting Module
GUARD0 No Guard1 Stainless Steel
VOLTAGE (See Note #2)/UNV 120VAC to 277VAC 50/60 Hz, 108VDC to 250VDC
SUFFIXESS812 Trunnion Mount
6
Hazard•Gard® EVLL Series LED Luminaires
CATALOG NUMBERING SYSTEM
SERIES LAMPOUTPUT
LEDCOLOR
MOUNTINGMODULE HUB SIZE GUARD VOLTAGE SUFFIXES
EVLL 5L C A 2 0 /UNV
Notes:
1. EVSA Adapter for use with existing CooperCrouse-Hinds EVI, EVLP, and EVM mountingmodules.
2. Accessory kit EVLL347/480 K1 (step downtransformer in separate enclosure) isavailable for 347V and 480V 60 Hzapplications.
PHOTOMETRICS
ZONE (DEGREES) LUMENS % OF LUMINAIRE
0-30 4221 31.7%
0-40 6923 52.1%
0-60 11630 87.5%
0-90 13500 100.0%
90-180 0 0%
0-180 13500 100.0%
Mtg.Hgt. A B C D E F
12’ 34.72 13.89 6.94 3.47 1.39 0.69
16’ 19.53 7.81 3.91 1.95 0.78 0.39
20’ 12.50 5.00 2.50 1.25 0.50 0.25
25’ 8.00 3.20 1.60 0.80 0.32 0.16
7
Hazard•Gard® EVLL Series LED Luminaires
ISOFOOTCANDLE CHART Footcandle Values for Isofootcandle Lines
DISTANCE TO MOUNTING HEIGHTIsofootcandle chart shows illuminance in
footcandles at ground level(EVLL13LCA20/UNV1)
LuminaireSeries
SystemWatts Lumens
EVLL5L 80W 5625EVLL7L 100W 6750EVLL9L 130W 9000
EVLL11L 151W 10500EVLL13L 175W 13500
LUMEN OUTPUT FOR OTHER EVLL LED LUMINAIRES
EngineeringSafety &Productivity
POLAR PLOT CANDELA(EVLL13LCA20/UNV1)
A B C D E F
3
2
1
0
-1
-2
-3-3 -2 -1 1 2 30
DIMENSIONS (INCHES)
Printed in USA
Cooper Industries, Ltd.600 Travis, Ste. 5800Houston, TX 77002-1001P: 713-209-8400www.cooperindustries.com
5039-0412
Hazard•Gard® EVLL Series LED Luminaires
[104]4.09
[91.3]3.59
[366.2]14.42
[391.6]15.42
[414.4]Ø 16.32
Pendant Mount )
[404.8]Ø 16
[80.2]3.16
[414.4]Ø 16.32
[342.4]13.48
[367.8]14.48
[334.5]13.17
Ceiling Mount )
[459.5]18.09
[407.7]16.05
[341.9]13.46
25°
[454.6]17.90
[241.5]9.51
[378.4]14.90
[353]13.90
[345.2]13.59
[407.6]Ø 16.05
Wall Mount )
Stanchion Mount )
EVJ2EV22EV33
EVMP2EVMP3EV22
EV33
EV87 EVMJ4
EVSP2EVSP3EVSP25EVSP32
EVSC2 EVSC25EVSC3 EVSC32
EVSA
EVSW2EVSW3
EVSW25EVSW32
EVSJ5
FAMILY TREE
Model Lbs.EVLL5L 51.76EVLL7L 51.81EVLL9L 52.38EVLL11L 53.00EVLL13L 53.00Add Mounting Modules:Pendant 2.0Ceiling 3.5Stanchion 3.0Wall 5.5Adapter 2.0
WEIGHTS
ModelMax.
AmbientTemp.
ºC
Cl. I,Div. 1
Cl. II, Div.1 & 2 /Simu.
Presence
Cl. I,Zone 1
EVLL5L40 T6 Pending Pending55 T6 Pending Pending65 T5 Pending Pending
EVLL7L40 T6 Pending Pending55 T6 Pending Pending65 T5 Pending Pending
EVLL9L40 T6 Pending Pending55 T6 Pending Pending65 T5 Pending Pending
EVLL11L40 T6 Pending Pending55 T6 Pending Pending
EVLL13L40 T6 Pending Pending55 T6 Pending Pending
AMBIENT TEMPERATURE
EngineeringSafety &Productivity
For more information, please contact us at www.crouse-hinds.com/contactus