HD EX ASM A RTPHON E EX TENSIONFOR HUM-ID SENSORS & HUM-ID APP
SEITE 2
CONTENTSApp for Android phones
App for iOS phones
HD EXA introduction
Starting the app
Connecting to smartphone
Scanning sensors
Localizing wet sensors
More features
PAGE 3
4
6
8
14
15
16
18
19
APP FOR ANDROID
PAGE 4
If you want to use the HD EXA with an Android device, please go to the Google Play Store and download the HUM-ID app.
play.digital/apps59
PAGE 5
Requires Android 3.0 or higher
APP FOR IOS
PAGE 6
If you want to use the HD EXA with an iPhone, please download the HUM-ID app directly from the App Store.
b.link/hum78
Requires iOS 10.1 or higher
PAGE 7
INTRODUCTION TO THE HD EX A
The HUM-ID App uses the HD EXA as a reading extension of your smartphone. The handheld device is able to read the HUM-ID sensors and transfers the reading information via Bluetooth to the HUM-ID app running on your smartphone.
PAGE 8
HOW TO HOLD THE DE VICEFor best results you should hold your Bluetooth enabled smartphone in your leading hand, the connected HD EXA in the other hand.
INTRODUCTION TO THE HD EX A
PAGE 9
CHARGING WITH USB
PAGE 10
The device can be charged with any USB power supply via the Micro-USB-Port. The power supply is not included in delivery.
0% to 100% 5 - 10 h
CHARGING WITH USB CHARGING WITH CR ADLE
PAGE 11
The device can be charged with the HD EXA cradle (optional accessory) as well.
0% to 100% 5 h
> 90%
30% - 90 %
< 30%
LED INDIC ATORS
PAGE 12
LED INDIC ATORS ACTIVATE BLUETOOTH
PAGE 13
Power on the device by pressing power button for 3 seconds. As soon as the Bluetooth-LED starts blinking the scanner is visible for other devices.
The HD EXA requires the Bluetooth LE protocoll.
BLUETOOTHON/OFF
POWER ON/OFF
The Bluetooth connection between the HD EXA and the smartphone will be established within the app (see page 15)!
STARTING THE APP
PAGE 14
1. First of all, you need to turn on Bluetooth on your smartphone within the settings of your operating system.
2. Start the HUM-ID App. The connection between the HD EXA and your smartphone is being established within the app when needed (see next page).
3. Allow the HUM-ID app to access your location and your media.
STARTING THE APP
PAGE 15
As soon as you start scanning the app establishes a Bluetooth connection between the HD EXA and your smartphone. iOS devices autoconnect to the scanner when Bluetooth is turned on. Android users choose the scanner from the device list actively.
EX A + SM ARTPHONE PAIRING
SCANNING THE SENSORS
PAGE 16
When the HD EXA is connected to your smartphone via Bluetooth, the blue light shines continuously. On the screen the grey checks turn to green and you are ready to start the scan.
Quick scan When you use this mode, you can immediately start scanning sensors and check them randomly for wetness.
Project scan To scan sensors of a specific project you must perform the initial check where you generate the blueprint by defining the sensors positions.
SCANNING THE SENSORS
PAGE 17
The initial check is very important. During this routine the sensors are checked for the first time. Moreover, the individual blueprint that will be used on any future check is beeing generated as well. Please note: The initial check must be performed right after the sealing has been finished. To define the accurate positions on the grid the sensors are read piece by piece. Therefore, the signal power of the HD EXA is dimmed automatically during the initial calibration.
INITIAL CHECK
MORE FEATURES
PAGE 18
LOCATE WET SENSORS
If the HD EXA finds a wet sensor, the screen turns orange. The localization feature shows your position in relation to the prior found wet sensor. The closer you get to the sensor the higher the percentage on the screen. If you want to continue scanning, just tap on the screen.
MORE FEATURESThe latest app version 2 offers many additional features, user interface optimizations and an overall increased stability.
You can always reach an animated manual providing tips and tricks on how to use the app by tapping on the info icon on the upper right screen.
b.link/app399
PAGE 19
Smartphone Extension HD EXA© 2019 Hum-ID GmbH
HUM-ID GmbH | Chausseestraße 107 | 10115 Berlin | Germany Service Hotline: +49 30 683 20 41 77 E-Mail Support: [email protected]
hum-id.com/help-app-en
®