Heatless Regenerative Air/Gas Dryers

PH/EH Series

Section 20Bulletin A-10-PH

• • • • •• • • • •• • • • •• • • • •• • • • •

•••••••••••••••••••••••••

Use of this Motor Challenge logo does not imply DOE endorsement.

Pneumatech reserves the

right to change or revise

specifications and product

design in connection

with any features of our

products. Such changes

do not entitle the buyer to

corresponding changes,

improvements, additions or

replacements for equipment

previously sold or shipped.

Pneumatech4909 70th AvenueKenosha, Wisconsin U.S.A. 53144(262) 658 -4300 Fax: (262) 658 -1945

w w w. p n e u m a t e c h . c o m

Distributed by:

0906

Clean, dry compressed air is vital to your busy production environment. If left untreated,

compressed air can damage your system and end product. Incorporating high-quality

components and energy-saving options, Pneumatech’s regenerative air dryers can

provide you with clean, dry air to extend the life of your equipment and products. With

decades of knowledge and in-house expertise, Pneumatech provides a wide range

of high performance solutions to meet any standard or custom package application.

O P T I O N S

•DewPointDemand(DPD)

- Utilizes the full drying capacity before regeneration

- Senses dew point at outlet of the dryer

- Extends valve life

- Includes High Humidity and Failure to Shift Alarms

- Digitial Dew Point Display

- Fast payback

- Affordable

•Moistureindicator

•Multiplefiltermountingpackages

•VarietyofNEMAratings

•cULus508aindustrialcontrolpanel

•-100°Fdewpoint

•Severedutypaint

•Highdesignpressuresavailable

F E A T U R E S

• DigitalMicroProcessor(DMP)ControlfeaturingCycleSightshowscycletimeandtowerstatus

• Drycontactsforalarmoutputs

• Cycleadvancepushbutton

• Nonvolatilememory-retainslastcyclestep

• Automaticrepressurization

• Highquality,2-waypilotoperatedinletswitchingvalves(non-lubricated)

- Ball valves with Teflon seats and seals up to PH-250

- Wafer style butterfly valves with buna seatsPH-300toPH-3100

• Lessthan3PSIDatratedflow

• Industrylowpurgerate–14%

• TowersmeetASMEandCRNrequirements

• Extratowercorrosionallowance

• Industrialenamelpaintfinish

S P E C I F I C A T I O N S

Model* PurgeFlow

In/Out Conn. Size

Dimensions L x W x H (in)

Desiccantlbs./tower

ShippingWeight lbs.

PH-35 4.9 0.75” NPT 36.27 x 22.14 x 63.31 23 390

PH-50 7 0.75” NPT 36.27 x 22.14 x 63.31 33 450

PH-75 10.5 1” NPT 40.27 x 24.22 x 60.12 50 500

PH-100 14 1” NPT 40.27 x 24.22 x 74.18 65 550

PH-150 21 1.5” NPT 51.06 x 24.6 x 75.87 100 600

PH-200 28 1.5” NPT 52.09 x 28.21 x 71.9 130 775

PH-250 35 1.5” NPT 48 x 26 x 83.9 165 800

PH-300 42 2” NPT 58.7 x 31.2 x 80.5 195 1050

PH-350 49 2” NPT 58.7 x 31.39 x 90.5 230 1200

PH-400 56 2” NPT 63.26 x 40.07 x 81.68 265 1285

PH-500 70 2” NPT 63.26 x 40.88 x 81.68 340 1500

PH-650 91 2” NPT 63.26 x 41.88 x 96.13 410 2170

PH-750 105 2.5” Flange 79.88 x 42 x 99.66 460 2400

PH-1000 140 2.5” Flange 79.88 x 43.88 x 91.66 725 2700

PH-1250 175 3” Flange 86.19 x 40 x 107.16 850 3200

PH-1500 210 3” Flange 92 x 48 x 91.16 1020 3750

PH-1800 252 4” Flange 103.77 x 52.85 x 108.83 1150 4400

PH-2100 294 4” Flange 108 x 55.85 x 98.83 1375 5600

PH-2600 364 4” Flange 108 x 55.85 x 110.83 1650 6800

PH-3100 434 6” Flange 110 x 56 x 134.95 1950 7600

The EH series is an economical choice that features high quality, 2-way pilot operated diaphragm type valves.

Model* PurgeFlow

In/Out Conn. Size

Dimensions L x W x H (in)

Desiccantlbs./tower

ShippingWeight lbs.

EH-35 4.9 0.75” NPT 36.27 x 22.14 x 63.31 23 400

EH-50 7 0.75” NPT 36.27 x 22.14 x 63.31 33 425

EH-75 10.5 1” NPT 40.27 x 24.22 x 60.12 50 450

EH-100 14 1” NPT 40.27 x 24.22 x 74.18 65 545

EH-150 21 1.5” NPT 51.06 x 24.6 x 75.87 100 590

EH-200 28 1.5” NPT 52.09 x 28.21 x 71.9 130 790

EH-250 35 1.5” NPT 48 x 26 x 83.9 165 850

EH-300 42 2” NPT 58.7 x 31.2 x 80.5 195 1030

EH-350 49 2” NPT 58.7 x 31.39 x 90.5 230 1225

EH-400 56 2” NPT 63.26 x 40.07 x 81.68 265 1300

EH-500 70 2” NPT 63.26 x 40.88 x 81.68 325 1500

EH-650 91 2” NPT 63.26 x 41.88 x 96.13 410 2020

*Model number indicates SCFM flow at 100 PSIG, 100°F.

CUSTOM UNIT

Operating SpecificationsOperatingPressure: 100PSIGOperatingTemp: 100ºFMaximumInletTemp: 120º FMinimumInletTemp: 70º FDesignPressure: 150PSIG at450º F(Vessels)OutletDewPoint: -40º FPowerSupply: 115V–1PH–60HZElectricals: NEMA4NEMACycle: 10MinutesDesiccant: ActivatedAlumina

PH-500

Clean, dry compressed air is vital to your busy production environment. If left untreated,

compressed air can damage your system and end product. Incorporating high-quality

components and energy-saving options, Pneumatech’s regenerative air dryers can

provide you with clean, dry air to extend the life of your equipment and products. With

decades of knowledge and in-house expertise, Pneumatech provides a wide range

of high performance solutions to meet any standard or custom package application.

O P T I O N S

•DewPointDemand(DPD)

- Utilizes the full drying capacity before regeneration

- Senses dew point at outlet of the dryer

- Extends valve life

- Includes High Humidity and Failure to Shift Alarms

- Digitial Dew Point Display

- Fast payback

- Affordable

•Moistureindicator

•Multiplefiltermountingpackages

•VarietyofNEMAratings

•cULus508aindustrialcontrolpanel

•-100°Fdewpoint

•Severedutypaint

•Highdesignpressuresavailable

F E A T U R E S

•DigitalMicroProcessor(DMP)Controlfeaturing CycleSightshowscycletimeandtowerstatus

•Drycontactsforalarmoutputs

•Cycleadvancepushbutton

•Nonvolatilememory-retainslastcyclestep

•Automaticrepressurization

•Highquality,2-waypilotoperatedinletswitchingvalves(non-lubricated)

- Ball valves with Teflon seats and seals up to PH-250

- Wafer style butterfly valves with buna seats PH-300toPH-3100

•Lessthan3PSIDatratedflow

•Industrylowpurgerate–14%

•TowersmeetASMEandCRNrequirements

•Extratowercorrosionallowance

•Industrialenamelpaintfinish

S P E C I F I C A T I O N S

Model* PurgeFlow

In/Out Conn. Size

Dimensions L x W x H (in)

Desiccantlbs./tower

ShippingWeight lbs.

PH-35 4.9 0.75” NPT 36.27 x 22.14 x 63.31 23 390

PH-50 7 0.75” NPT 36.27 x 22.14 x 63.31 33 450

PH-75 10.5 1” NPT 40.27 x 24.22 x 60.12 50 500

PH-100 14 1” NPT 40.27 x 24.22 x 74.18 65 550

PH-150 21 1.5” NPT 51.06 x 24.6 x 75.87 100 600

PH-200 28 1.5” NPT 52.09 x 28.21 x 71.9 130 775

PH-250 35 1.5” NPT 48 x 26 x 83.9 165 800

PH-300 42 2” NPT 58.7 x 31.2 x 80.5 195 1050

PH-350 49 2” NPT 58.7 x 31.39 x 90.5 230 1200

PH-400 56 2” NPT 63.26 x 40.07 x 81.68 265 1285

PH-500 70 2” NPT 63.26 x 40.88 x 81.68 340 1500

PH-650 91 2” NPT 63.26 x 41.88 x 96.13 410 2170

PH-750 105 2.5” Flange 79.88 x 42 x 99.66 460 2400

PH-1000 140 2.5” Flange 79.88 x 43.88 x 91.66 725 2700

PH-1250 175 3” Flange 86.19 x 40 x 107.16 850 3200

PH-1500 210 3” Flange 92 x 48 x 91.16 1020 3750

PH-1800 252 4” Flange 103.77 x 52.85 x 108.83 1150 4400

PH-2100 294 4” Flange 108 x 55.85 x 98.83 1375 5600

PH-2600 364 4” Flange 108 x 55.85 x 110.83 1650 6800

PH-3100 434 6” Flange 110 x 56 x 134.95 1950 7600

The EH series is an economical choice that features high quality, 2-way pilot operated diaphragm type valves.

Model* PurgeFlow

In/Out Conn. Size

Dimensions L x W x H (in)

Desiccantlbs./tower

ShippingWeight lbs.

EH-35 4.9 0.75” NPT 36.27 x 22.14 x 63.31 23 400

EH-50 7 0.75” NPT 36.27 x 22.14 x 63.31 33 425

EH-75 10.5 1” NPT 40.27 x 24.22 x 60.12 50 450

EH-100 14 1” NPT 40.27 x 24.22 x 74.18 65 545

EH-150 21 1.5” NPT 51.06 x 24.6 x 75.87 100 590

EH-200 28 1.5” NPT 52.09 x 28.21 x 71.9 130 790

EH-250 35 1.5” NPT 48 x 26 x 83.9 165 850

EH-300 42 2” NPT 58.7 x 31.2 x 80.5 195 1030

EH-350 49 2” NPT 58.7 x 31.39 x 90.5 230 1225

EH-400 56 2” NPT 63.26 x 40.07 x 81.68 265 1300

EH-500 70 2” NPT 63.26 x 40.88 x 81.68 325 1500

EH-650 91 2” NPT 63.26 x 41.88 x 96.13 410 2020

*Model number indicates SCFM flow at 100 PSIG, 100°F.

CUSTOM UNIT

Operating SpecificationsOperatingPressure: 100PSIGOperatingTemp: 100ºFMaximumInletTemp: 120º FMinimumInletTemp: 70º FDesignPressure:150PSIGat450º F(Vessels)OutletDewPoint: -40º FPowerSupply: 115V–1PH–60HZElectricals: NEMA4NEMACycle: 10MinutesDesiccant: ActivatedAlumina

PH-500

Heatless Regenerative Air/Gas Dryers

PH/EH Series

Section 20Bulletin A-10-PH

• • • • •• • • • •• • • • •• • • • •• • • • •

•••••••••••••••••••••••••

Use of this Motor Challenge logo does not imply DOE endorsement.

Pneumatech reserves the

right to change or revise

specifications and product

design in connection

with any features of our

products. Such changes

do not entitle the buyer to

corresponding changes,

improvements, additions or

replacements for equipment

previously sold or shipped.

Pneumatech4909 70th AvenueKenosha, Wisconsin U.S.A. 53144(262) 658 -4300 Fax: (262) 658 -1945

w w w. p n e u m a t e c h . c o m

Distributed by:

0906