SURREY 1.855.258.3835 • CALGARY 1.866-629.7847 EDMONTON 1.800.661.7770 • SASKATOON 1.800.667.5886
190
HO
SE REELS HO
SE R
EELSHannay LPG Reels
PB/ DPB Manual or Power Rewind ReelsTo handle single 1” through 1-1/2” I.D. hose.• Series PB are explosion-proof reels.• New DPB Series reel is direct drive eliminating the use of chain and sprockets.• Choose gear-driven crank rewind, chain and sprocket drive powered by an electric, hydraulic or compressed air motor or direct drive hydraulic rewind motor.• Crank rewind reels and direct drive reels supplied with pinion brake.• Power rewind reels (chain & sprocket driven) supplied with astrap brake. Other brake and locking devices may be specified.• Standard inlet is 90° ball bearing swivel joint with 1-1/2” female NPT threads.• Standard outlet is a flanged riser with 1” female NPT threads.Standard inlet, outlet riser, and hub assembly are steel.• Other sizes and/or threads can be furnished and must be specified.• Rollers and roller mounting brackets are accessory items. Specify roller position.• Pressures to 350 psi (24 bar).• Temperatures from -40° F to +350° F (-40° C to +177° C).• Consult factory for other pressures and temperatures.
Model Hose Capacity of Reel Approx.Weight Reel Dimensions***Number feet Crank Rewind inches
m. lb. mm.kg.
See Note 4
I.D. (in) 1" 1-1/2" FI.D. (mm) 25 38 DIRECTO.D. (in) 1.5" 2.16" NET* SHIP A B D E F DRIVE G H X YO.D. (mm) 38 55 POWER HYD
PB24-23-24 125 50 102 144 21 15.5 20.5 22.75 29.25 35.12 23.5 12.12 13 16.7538 15 46 65 533 394 521 578 743 892 597 308 330 425
PB30-23-24 150 75 115 157 27.5 22 20.5 22.75 35.75 41.62 23.5 12.12 19.5 16.7546 23 52 71 699 559 521 578 908 1057 597 308 495 425
PB24-25-26 150 75 110 152 21 15.5 25.5 24.75 29.25 35.12 27.88 15.5 13 21.7546 23 50 69 533 394 648 629 743 892 708 394 330 552
PB28-25-26 200 100 123 165 25.5 20 25.5 24.75 33.75 39.62 27.88 15.5 17.5 21.7561 30 56 75 648 508 648 629 857 1006 708 394 445 552
PB22-30-31 250 100 118 168 19 13.5 25.5 28.75 27.25 33.12 29.88 15.5 11 21.7576 30 54 76 483 343 648 730 692 841 759 394 279 552
PB18-33-34 200 75 117 167 14.5 9.5 31.5 31.75 23.75 29.12 33.62 17.75 7 27.7561 23 53 76 368 241 800 806 603 740 854 451 178 705
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com [email protected]
Notes:1. Specifications subject to change.2. Upon request, reels can be supplied with drum lengths other than shown and
with disc sizes in other diameters.3. Dimensions shown for reels up to and including 30-31 disc size reflect
pressed frames. All others are channel frames.4. Weights shown in chart are for crank rewind models. ADD these amounts for
power rewind models:Net (lbs.) Ship (lbs.) Net (kg.) Ship (kg.)
Electric 40 40 18.1 18.1Hydraulic 20 20 9.1 9.1Air 20 20 9.1 9.1
5. When ordering power rewind models, prefix model number with:A = Air Rewind – Supplied with control valve and hose.E = Explosion Proof Electric Rewind (1/2 HP) – Supplied with explosion proofswitch, solenoid, and junction box.HD = Hydraulic Rewind – Not supplied with control valve.D = Direct Drive Hydraulic Rewind – Not supplied with control valve
6. Be sure to check dimensions and weights prior to ordering.NOTICE: A Flexible Connector must be used between the inlet pipe and theinlet swivel joint.***x,y indicate mounting holes.
3
S E R I E S
For PowerRewind
See Note 5
Parts Drawing – ISO 18
Series EPB
Series DPB
C10.5267
B
X
AF
G
H
Y
D
E
C10.5267
G
H
E
D
FAX
B
Y
WWW.MAXQUIP.CA • WINNIPEG 1.844.278.5771 TORONTO 1.800.801.8512 • MONTREAL 1.877.629.7847
191
HO
SE REELS HO
SE R
EELS
To handle single 1” through 1-1/2” I.D. hose.• Choose chain and sprocket drive powered by an electric, hydraulic or compressed air motor or direct drive hydraulic rewind motor.• Auxiliary crank rewind standard on DPB Series reels. Available on PB Series power rewind reels, at extra cost.• Direct drive hydraulic rewind reels supplied with pinion brake. Electric powered rewind reels supplied with a strap brake.• Other brake and locking devices may be specified. (See Ordering & Accessory Guide)• Standard inlet is 90° ball bearing swivel joint with 1-1/2” female NPT threads.• Standard outlet is a flanged riser with 1” female NPT threads.• Standard inlet, outlet riser, hub assembly are steel.• Other sizes and/or threads can be furnished and must be specified.• Pressures to 350 psi (24 bar).• Temperatures from -40° F to +350° F (-40° C to +177° C).• Consult factory for other pressures and temps.Series PBGMB• For PBGMB reels the assembly B bottom wind roller is standard.
PBGMT/PBGMB Power Rewind ReelsHannay LPG Reels
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com [email protected] 5
S E R I E S
Model Cable Capacity of Reel Approx. Weight Reel Dimensions***Number feet Crank Rewind inches
m. lb. mm.kg.
O.D. (in) 1" 1-1/2" FO.D. (mm) 25 38 DIRECTO.D. (in) 1.5" 2.16" NET SHIP A B D E F DRIVE G H J K L M X YO.D. (mm) 38 55 PWR HYD
PBGMT 24-23-24 125 50 168 193 21 15.5 20.5 22.75 29.25 35.12 29.5 12.12 33 36.75 30 31.5 13 16.7538 15 76 88 533 394 521 578 743 892 749 308 838 933 762 800 330 425
PBGMT 30-23-24 150 75 178 208 27.5 22 20.5 22.75 35.75 41.62 29.5 12.12 33 40.62 36.75 31.5 19.5 16.7546 23 81 94 699 559 521 578 908 1057 749 308 838 1032 933 800 495 425
PBGMT 28-25-26 200 110 181 211 25.5 20 25.5 24.75 33.75 39.62 33 15.5 34 39 34.75 35 17.5 21.7561 34 82 96 648 508 648 629 857 1006 838 394 864 991 883 889 445 552
PBGMB 24-23-24 125 50 160 185 21 15.5 20.5 22.75 29.25 35.12 23.5 12.12 49 36.75 30 – 13 16.7538 15 73 84 533 394 521 578 743 892 597 308 1245 933 762 – 330 425
PBGMB 30-23-24 150 75 170 200 27.5 22 20.5 22.75 35.75 41.62 23.5 12.12 49 36.75 36.75 – 19.5 16.7546 23 77 91 699 559 521 578 908 1057 597 308 1245 933 933 – 495 425
PBGMB 28-25-26 200 100 191 221 25.5 20 25.5 24.75 33.75 39.62 27.88 15.5 47.75 39 34.75 – 17.5 21.7561 30 87 100 648 508 648 629 857 1006 708 394 1213 991 883 – 445 552
PBGMB 18-33-34 PBGMT 28-25-26 200 75 175 225 14.5 9.5 31.5 31.75 23.75 29.12 33.62 17.75 56.75 33.5 26.75 – 7 27.7561 23 79 102 368 241 800 806 603 740 854 451 1441 851 679 – 178 705
Parts Drawing: Both Series PBGMT and Series PBGMB – ISO 18 and ISO 195
For PowerRewind
See Note 3
C10.5267
B
M
X
A
F
K
L
YD
E
J
H
G
C10.5267
BJ
E
D
H
G
YXA
FK
L
Notes:1. Specifications subject to change.2. Upon request, reels can be supplied with drum lengths other than
shown and with disc sizes in other diameters.3. When ordering power rewind models, prefix model number with:
A = Air Rewind–Supplied with control valve and hose.E = Explosion Proof Electric Rewind (1/2 HP)–Supplied with explosion proof switch, solenoid, and junction box.HD = Hydraulic Rewind–Not supplied with control valve.D = Direct Drive Hydraulic Rewind–Not supplied with control valve.
4. Dimension J is maximum, with Guidemaster in operating position.Dimension K is maximum, with Guidemaster in traveling positionopposite rewind motor, as shown in dimensional drawing. DimensionL is maximum, with Guidemaster in traveling position on same side asrewind motor.
5. Guidemaster weight is approximately 21 lbs. Guidemasters areshipped as parts.
6. Be sure to check dimensions and weights prior to ordering.NOTICE: A Flexible Connector must be used between the inlet pipe andthe inlet swivel joint.***x,y indicate mounting holes.
Series PBGMT
Series PBGMB
SURREY 1.855.258.3835 • CALGARY 1.866-629.7847 EDMONTON 1.800.661.7770 • SASKATOON 1.800.667.5886
192
HO
SE REELS HO
SE R
EELS
Swivel Joints, Risers and Hub AssembliesHannay LPG Reels
SWIVEL JOINTS, RISERS, HUB ASSEMBLIES
HANNAY REELSPARTS ID GUIDE
ITEM
C1
C2
C4
C5
C6
C7
C8
C9
C10
C11
C12
C13
C14
C15
C16
C16
C17
PART
9927.8138
9929.8538
9927.8151
9929.8551
Specify
9930.4210
9930.4610
9936.0642
9930.5703
9936.0659
9929.0501
9930.0531
9901.1600
9901.3760
9965.0024
9965.0025
9901.2840
DESCRIPTION
1/2” 90° MxF BP Super Swivel
1” 90° FxF BP Super Swivel
1/2” 90° MxF Super Swivel (FxF also Avail.) 9927.8551
1” 90° FxF Super Swivel (Buna)
Super Swivel Repair Kit (Specify Size)
1-1/2” 90° FxFxV Swivel (WHJ1590)
1-1/2” Straight FxFxV Swivel(WHJ15180)
1-1/2” PK-1 BUNA-N Packing (Merkel)
1-1/2” Straight Victaulic H-5 Joint
H-5C Rope Packing Seal for H-5 Joint
1” 90° Full Circle Swivel
1-1/2” 90° FxF Full-Circle Swivel
1” FIPT Iron Welded Hub Assembly (Specify Model)
1-1/2” FIPT Iron Flanged Riser
O-Ring for 1-1/2” Risers (2-5/8” Diam.)
O-Ring for 3” Risers (3-3/4” Diam.)
1-1/2” Hub Assy Complete (Specify Model)
ITEM
E3
E4
E5
E6
E7
Not Shown
E8
E9
BEARINGSPART
9902.1200
9902.1300
9902.1400
9902.1500
9902.1610
9902.1620
9902.1700
9902.1730
DESCRIPTION
1/2” S.A. Ball Bearing Complete
1/2” S.A. Ball Bearing Insert
1” S.A. Ball Bearing Complete
1” S.A. Ball Bearing Insert
1-1/2” S.A. Bronze Bearing Complete (E-coated)
1-1/2” S.A. Bronze Bearing Complete (304 S.S.)
1-1/2” S.A. Bronze Bearing Insert
1” S.A. Bronze Bearing insert
C8
C9
C14
C15
C16
E5 E6
E7 E8
C17
C7
C1 C2
C5
C6
C13
C4
E3 E4
E9
C10
C12
1
Note - photos shown not actual size.
C11
SWIVEL JOINTS, RISERS, HUB ASSEMBLIES
HANNAY REELSPARTS ID GUIDE
ITEM
C1
C2
C4
C5
C6
C7
C8
C9
C10
C11
C12
C13
C14
C15
C16
C16
C17
PART
9927.8138
9929.8538
9927.8151
9929.8551
Specify
9930.4210
9930.4610
9936.0642
9930.5703
9936.0659
9929.0501
9930.0531
9901.1600
9901.3760
9965.0024
9965.0025
9901.2840
DESCRIPTION
1/2” 90° MxF BP Super Swivel
1” 90° FxF BP Super Swivel
1/2” 90° MxF Super Swivel (FxF also Avail.) 9927.8551
1” 90° FxF Super Swivel (Buna)
Super Swivel Repair Kit (Specify Size)
1-1/2” 90° FxFxV Swivel (WHJ1590)
1-1/2” Straight FxFxV Swivel(WHJ15180)
1-1/2” PK-1 BUNA-N Packing (Merkel)
1-1/2” Straight Victaulic H-5 Joint
H-5C Rope Packing Seal for H-5 Joint
1” 90° Full Circle Swivel
1-1/2” 90° FxF Full-Circle Swivel
1” FIPT Iron Welded Hub Assembly (Specify Model)
1-1/2” FIPT Iron Flanged Riser
O-Ring for 1-1/2” Risers (2-5/8” Diam.)
O-Ring for 3” Risers (3-3/4” Diam.)
1-1/2” Hub Assy Complete (Specify Model)
ITEM
E3
E4
E5
E6
E7
Not Shown
E8
E9
BEARINGSPART
9902.1200
9902.1300
9902.1400
9902.1500
9902.1610
9902.1620
9902.1700
9902.1730
DESCRIPTION
1/2” S.A. Ball Bearing Complete
1/2” S.A. Ball Bearing Insert
1” S.A. Ball Bearing Complete
1” S.A. Ball Bearing Insert
1-1/2” S.A. Bronze Bearing Complete (E-coated)
1-1/2” S.A. Bronze Bearing Complete (304 S.S.)
1-1/2” S.A. Bronze Bearing Insert
1” S.A. Bronze Bearing insert
C8
C9
C14
C15
C16
E5 E6
E7 E8
C17
C7
C1 C2
C5
C6
C13
C4
E3 E4
E9
C10
C12
1
Note - photos shown not actual size.
C11
Bearings
WWW.MAXQUIP.CA • WINNIPEG 1.844.278.5771 TORONTO 1.800.801.8512 • MONTREAL 1.877.629.7847
193
HO
SE REELS HO
SE R
EELS
Motors, Sprockets and ChainHannay Reels
ITEM
A1A2
A3A5
A6
A7
A8
A9A9
A10A10A11
A12
Not Shown
A13A14A15A16A17
Not Shown
A18
MOTORS, SPROCKETS, CHAINPART
9915.00429915.0003
9915.00149916.0071
9916.0070
9923.0008
9923.0006
9912.00019912.00029912.00109912.00099910.1423
9910.3128
9910.1321
9910.11169910.11179910.11189910.11199910.2219
9910.2100
Specify
DESCRIPTION
12 Volt Flange Mount Non-Exp-Proof Motor12 Volt Flange Mount Explosion-ProofMotor12 Volt Base Mount Explosion-Proof MotorPair of Brushes for 12 Volt Non-Exp-ProofMotor (#572008)Two Pairs of Brushes for 12 Volt ExplosionProof Motor (#572000)Flange Mount Motor Plate for Non-Exp-Proof MotorP66A-00090 Motor Mounting Plate RightAngle for Non-Exp-Proof Motor10’ Length #35 Chain w/Connecting Link10’ Length #40 Chain w/Connecting LinkConnecting Link for #35 ChainConnecting Link for #40 Chain138T35 Disc Sprocket, 16-5/8” Diameter(E-Coated)146T40 Disc Sprocket, 23-1/2” Diameter(E - coated)112T35 Disc Sprocket, 13-3/8” Diameter(E-coated)11T35 Motor Sprocket, 3/4” Long11T35 Motor Sprocket, 1-1/16” Long11T35 Motor Sprocket, 1-5/16” Long11T35 Motor Sprocket, 1-3/4” LongDisc & Sprocket for Caliper Brake (#35Chain)Disc & Sprocket for Caliper Brake (#40Chain)Molded Chain Guard (left or right)
ITEMB1
B2
B4
B5
B6
B7
B8
B9
B10
B11
B12
B13
B14
SWITCHES AND ELECTRICALPART
9917.0001
9917.0014
9917.0061
9917.0062
9917.0063
9917.0025
Specify
9917.0024
9917.0006
9917.0008
9917.0200
9917.0207
9917.0208
DESCRIPTIONRed Dot EXPB-2A Switch (12 Volt)
Red Dot Internal Switch
Red Dot 5-Port Round Junction Box/Cover
#6 Wire Nut (For Red Dot Junction Box)
Insulated “Bug” Connector
12 Volt Solenoid (Diode-Suppressed)
SDLM Circuit Breaker (Specify Amperage)
CB-2 Mounting Bracket (for Circuit Breaker)
Push-Button 12 Volt Switch (Less Cap)
Rubber Cap (For Push Button Switch)
EPS-1 Switch (Used with Guidemaster)
EPS-2 Mounting Bracket (Used with EPS-1)
Extension Bracket for EPS-2
A2
A3
A1
A5
A6
A7
A8
A10
A11
A12
A15
A16
A17
B1
B5
B10 B11
B12
B14B13
B2
B6 B7B8
B4
A13
A14
A18
2
Non platedA9
B9
ITEM
A1A2
A3A5
A6
A7
A8
A9A9
A10A10A11
A12
Not Shown
A13A14A15A16A17
Not Shown
A18
MOTORS, SPROCKETS, CHAINPART
9915.00429915.0003
9915.00149916.0071
9916.0070
9923.0008
9923.0006
9912.00019912.00029912.00109912.00099910.1423
9910.3128
9910.1321
9910.11169910.11179910.11189910.11199910.2219
9910.2100
Specify
DESCRIPTION
12 Volt Flange Mount Non-Exp-Proof Motor12 Volt Flange Mount Explosion-ProofMotor12 Volt Base Mount Explosion-Proof MotorPair of Brushes for 12 Volt Non-Exp-ProofMotor (#572008)Two Pairs of Brushes for 12 Volt ExplosionProof Motor (#572000)Flange Mount Motor Plate for Non-Exp-Proof MotorP66A-00090 Motor Mounting Plate RightAngle for Non-Exp-Proof Motor10’ Length #35 Chain w/Connecting Link10’ Length #40 Chain w/Connecting LinkConnecting Link for #35 ChainConnecting Link for #40 Chain138T35 Disc Sprocket, 16-5/8” Diameter(E-Coated)146T40 Disc Sprocket, 23-1/2” Diameter(E - coated)112T35 Disc Sprocket, 13-3/8” Diameter(E-coated)11T35 Motor Sprocket, 3/4” Long11T35 Motor Sprocket, 1-1/16” Long11T35 Motor Sprocket, 1-5/16” Long11T35 Motor Sprocket, 1-3/4” LongDisc & Sprocket for Caliper Brake (#35Chain)Disc & Sprocket for Caliper Brake (#40Chain)Molded Chain Guard (left or right)
ITEMB1
B2
B4
B5
B6
B7
B8
B9
B10
B11
B12
B13
B14
SWITCHES AND ELECTRICALPART
9917.0001
9917.0014
9917.0061
9917.0062
9917.0063
9917.0025
Specify
9917.0024
9917.0006
9917.0008
9917.0200
9917.0207
9917.0208
DESCRIPTIONRed Dot EXPB-2A Switch (12 Volt)
Red Dot Internal Switch
Red Dot 5-Port Round Junction Box/Cover
#6 Wire Nut (For Red Dot Junction Box)
Insulated “Bug” Connector
12 Volt Solenoid (Diode-Suppressed)
SDLM Circuit Breaker (Specify Amperage)
CB-2 Mounting Bracket (for Circuit Breaker)
Push-Button 12 Volt Switch (Less Cap)
Rubber Cap (For Push Button Switch)
EPS-1 Switch (Used with Guidemaster)
EPS-2 Mounting Bracket (Used with EPS-1)
Extension Bracket for EPS-2
A2
A3
A1
A5
A6
A7
A8
A10
A11
A12
A15
A16
A17
B1
B5
B10 B11
B12
B14B13
B2
B6 B7B8
B4
A13
A14
A18
2
Non platedA9
B9
Switches and Electrical
SURREY 1.855.258.3835 • CALGARY 1.866-629.7847 EDMONTON 1.800.661.7770 • SASKATOON 1.800.667.5886
194
HO
SE REELS HO
SE R
EELS
Roller Assemblies, Cable Guides and Hose StopsHannay Reels
ITEMD1D2D3D4D5D6D7D8D9
D10D11
D12aD12b
Not Shown
D13D14D15D16D17D18D19D20
D21
D22D23D24
D25aD25bD26
ROLLER ASSEMBLIES, CABLE GUIDES, HOSE STOPSPARTSpecify
9939.00429940.00129940.00029940.00059940.00069940.00079940.00089939.00629940.00769939.00039922.01119922.0200
9922.0210
9922.00129951.00099951.00109951.0012
SpecifySpecifySpecifySpecify
9940.0016
9940.00109940.00039940.00099940.00719940.00729939.1062
DESCRIPTIONTop Wind FH-3 Mtg. Brkt. (Specify Model)FH-3 Roller & Spool Assy. (Specify Model)FH-307 Delrin-Over-Steel Step BoltFH-309-P Black Plastic CapFH-301 SpoolFH-302 BlockFH-303-15 (1.5”) Trunnion BearingFH-303-2 (2”) Trunnion BearingUtility Hose Roller Assy. “C” (Spec. Model)EH-650 Mounting Block (Plated)EH-714 Roller AssemblyHS-3 Hose Stop (Specify OD of Hose)HS-35 Hose Stop For Single Hose(Specify OD of Hose)HS-35 Hose Stop For Twin Hoses(Specify OD of Hose) HS-45 Hose Stop (Specify OD of Hose)GR-4A Guide Arm PositionerGR-4 Guide ArmGR-5 Scoop Cable Guide“R200” Series Roller Assembly“N200” Series Roller Assembly“R300” Series Roller AssemblyRoller Mounting Arm (2) per reel(For “N” Series Spring Reels)FH-303 1 1/2“Trunnion Bearing (New Style)(No Through Hole)FH-305 2” SST Roller Tubing1 1/2” SST Roller TubingFH-304 Roller RodLEFT HAND roller mounting block (plated)RIGHT HAND roller mounting block (plated)Assy C2 Roller with 1 1/2” Diam. Roller(Style 2) (Specify Model)
ITEM
G1
G2
G3
G5
G6
G7
G8
G10
G11
G12
G15
G16
G17
G18
GUIDEMASTER PARTS AND BRACKETSPART
9945.0026
9945.0044
9945.0019
9944.0040
9945.0009
9945.0011
9945.1001
9945.1005
9945.1003
9945.1004
9945.0035
9945.0036
9945.0037
9939.0069
DESCRIPTION
GM Ball Bearing (For GM-609 Roller)
GM-108 Ball Bearing (For GM-109 Roller)
GM-609 Roller w/GM Bearing
GM-700 Guide Arm Body Assy w/Mtg. Yoke
GM Mounting Yoke w/Bronze Bushing
GM Oil-Impregnated Bronze Bushing
GM Roller Body w/Mtg. Bolts
GM Roller Mtg. Bolts
Pinlock assy for GM 700
GM Roller Bolt Mounting Plate
GM Cross Member Assembly (3 Pieces)(Specify Model)
GM Bottom-Wind Brackets (Pair)
GM Top-Wind Brackets (Pair)
Assy. “B” Roller for Bottom-WindGuidemaster Reels (specify model)
D1
D2
D3 D4
D5 D6
D7D8
D12a D13 D14D15
D16D17 D18
D19
D20
G1 G2 G3
G8
G10 G11
G12G15
G16
G17
D11
D10
G18
3
D21
G6G7
G5
D25a
D26
D25b
D12b
D22
D23
D24
D9
ITEMD1D2D3D4D5D6D7D8D9
D10D11
D12aD12b
Not Shown
D13D14D15D16D17D18D19D20
D21
D22D23D24
D25aD25bD26
ROLLER ASSEMBLIES, CABLE GUIDES, HOSE STOPSPARTSpecify
9939.00429940.00129940.00029940.00059940.00069940.00079940.00089939.00629940.00769939.00039922.01119922.0200
9922.0210
9922.00129951.00099951.00109951.0012
SpecifySpecifySpecifySpecify
9940.0016
9940.00109940.00039940.00099940.00719940.00729939.1062
DESCRIPTIONTop Wind FH-3 Mtg. Brkt. (Specify Model)FH-3 Roller & Spool Assy. (Specify Model)FH-307 Delrin-Over-Steel Step BoltFH-309-P Black Plastic CapFH-301 SpoolFH-302 BlockFH-303-15 (1.5”) Trunnion BearingFH-303-2 (2”) Trunnion BearingUtility Hose Roller Assy. “C” (Spec. Model)EH-650 Mounting Block (Plated)EH-714 Roller AssemblyHS-3 Hose Stop (Specify OD of Hose)HS-35 Hose Stop For Single Hose(Specify OD of Hose)HS-35 Hose Stop For Twin Hoses(Specify OD of Hose) HS-45 Hose Stop (Specify OD of Hose)GR-4A Guide Arm PositionerGR-4 Guide ArmGR-5 Scoop Cable Guide“R200” Series Roller Assembly“N200” Series Roller Assembly“R300” Series Roller AssemblyRoller Mounting Arm (2) per reel(For “N” Series Spring Reels)FH-303 1 1/2“Trunnion Bearing (New Style)(No Through Hole)FH-305 2” SST Roller Tubing1 1/2” SST Roller TubingFH-304 Roller RodLEFT HAND roller mounting block (plated)RIGHT HAND roller mounting block (plated)Assy C2 Roller with 1 1/2” Diam. Roller(Style 2) (Specify Model)
ITEM
G1
G2
G3
G5
G6
G7
G8
G10
G11
G12
G15
G16
G17
G18
GUIDEMASTER PARTS AND BRACKETSPART
9945.0026
9945.0044
9945.0019
9944.0040
9945.0009
9945.0011
9945.1001
9945.1005
9945.1003
9945.1004
9945.0035
9945.0036
9945.0037
9939.0069
DESCRIPTION
GM Ball Bearing (For GM-609 Roller)
GM-108 Ball Bearing (For GM-109 Roller)
GM-609 Roller w/GM Bearing
GM-700 Guide Arm Body Assy w/Mtg. Yoke
GM Mounting Yoke w/Bronze Bushing
GM Oil-Impregnated Bronze Bushing
GM Roller Body w/Mtg. Bolts
GM Roller Mtg. Bolts
Pinlock assy for GM 700
GM Roller Bolt Mounting Plate
GM Cross Member Assembly (3 Pieces)(Specify Model)
GM Bottom-Wind Brackets (Pair)
GM Top-Wind Brackets (Pair)
Assy. “B” Roller for Bottom-WindGuidemaster Reels (specify model)
D1
D2
D3 D4
D5 D6
D7D8
D12a D13 D14D15
D16D17 D18
D19
D20
G1 G2 G3
G8
G10 G11
G12G15
G16
G17
D11
D10
G18
3
D21
G6G7
G5
D25a
D26
D25b
D12b
D22
D23
D24
D9
Guidemaster Parts and Brackets
WWW.MAXQUIP.CA • WINNIPEG 1.844.278.5771 TORONTO 1.800.801.8512 • MONTREAL 1.877.629.7847
195
HO
SE REELS HO
SE R
EELS
Roller Assemblies, Cable Guides and Hose StopsHannay Reels
REWIND ASSEMBLIES, BRAKES, RATCHETSITEM
F1F2F3F4F5F6F7F8F9F10F11F12F13F14F15
Not Shown
F16F18F19F21F22F23F24
Not Shown
F25
Not Shown
F26
F27
F28
F29F30
F31
PARTSpecify
9914.02339914.03729914.03829914.03939914.0403
Spec. Model
9914.03519914.06189914.02439914.04139914.04519914.04339914.00119947.00209947.00019947.00249947.00369947.00389922.00159965.00309965.00369947.0090
9947.0043
9947.0130
9922.0008
9922.0301
9922.0302
9922.0311
9922.03129922.0321
9922.0322
DESCRIPTION30° Rewind Bracket (specify right or left)Vertical Rewind Bracket OnlyH-26 Ring GearH-28 Ring GearH-27 Pinion GearH-29 Pinion GearPinion ShaftPinion Shaft CollarPinion Gear Guard (E-Coated)H-2A Pinion Shaft BearingH-30A Brake WheelH-31 Brake SpringH-3 Brake PadH-18 Hand CrankAir Caliper BrakeManual Caliper BrakePair of Brake Pads (For Air Caliper Brake)Comet Brake Strap Only (IV Style)Comet Brake Iron Hub (IV Style)Ratchet Wheel (new 2 position)PL-1 PinlockPL-4 Pinlock with Extended Mounting EarsComet Brake Assembly(Bearing Mounted Style)
Comet Brake Assembly (Bearing Mounted Style with Stub Shaft)
Cam Lever Drag Brake Kit 3-Position Lever(including mounting hardware)
Ratchet Locking Spring
Left Hand Pawl & Pin (304 SST)
Right Hand Pawl & Pin (304 SST)
Left Hand Ratchet Locking Assy for HGR,SCR, SGCR, Reverse N-Series
Right Hand Ratchet Locking Assy for N-seriesLeft Hand Ratchet Locking Assy forRollform Reels
Right Hand Ratchet Locking Assy forReverse Rollform Reels
F1
F5 F6 F7 F8 F9
F10
F14
F15 F16
F18
F21F22 F23
F24
F11
F2 F3 F4
Hannay Reels, Inc., 553 State Route 143Westerlo, New York 12193Telephone 518-797-3791Toll Free 1-877-GO-Reels (467-3357)FAX 1-800-REELING (733-5464)INT’L FAX (518) 797-3259Website: www.hannay.comE-mail: [email protected]
F12
F13
Available from:
4
F25
F19
F26 F27
F28
F29F30
F31
1M HP 9-10 H-9701-PIG Rev. 8
SURREY 1.855.258.3835 • CALGARY 1.866-629.7847 EDMONTON 1.800.661.7770 • SASKATOON 1.800.667.5886
196
HO
SE REELS HO
SE R
EELS
Guide Master 700 Parts BreakdownHannay LPG Reels
WWW.MAXQUIP.CA • WINNIPEG 1.844.278.5771 TORONTO 1.800.801.8512 • MONTREAL 1.877.629.7847
197
HO
SE REELS HO
SE R
EELS
Guidemaster BracketsHannay LPG Reels
SURREY 1.855.258.3835 • CALGARY 1.866-629.7847 EDMONTON 1.800.661.7770 • SASKATOON 1.800.667.5886
198
HO
SE REELS HO
SE R
EELS
Clutch Reduction Unit Assembly
The reel leader.
Hannay LPG Reels
WWW.MAXQUIP.CA • WINNIPEG 1.844.278.5771 TORONTO 1.800.801.8512 • MONTREAL 1.877.629.7847
199
HO
SE REELS HO
SE R
EELSHannay LPG Reels
Utility Hose Rollers Breakdown
Hannay Reels, Inc., 553 State Route 143Westerlo, NY 12193Telephone 518-797-3791; Toll Free 1-877-GO REELS (467-3357)FAX 1-800-REELING (733-5464)INT’L FAX (518) 797-3259Website: www.hannay.comE-mail: [email protected]
ISO 115PARTS LIST
UTILITY HOSE ROLLERSAssembly Styles A/B/C & A2/B2/C2
3M HP 3-10 Form H-8511-PRev. 11
Hannay ISO Parts Lists are availableat www.hannay.com
ROLLER MOUNTING BRACKET(PRESSED FRAME & ROLL FORM FRAME)
ROLLER MOUNTING BRACKET(TRAPEZOIDAL FRAME)
ASSEMBLY “A” OR “A2”
ASSEMBLY “B” OR “B2”
ASSEMBLY “C” OR “C2”
PARTS LISTISO 115
UTILITY HOSE ROLLERSAssembly Styles A/B/C & A2/B2/C2
Item No. Description PART NUMBER QuantityUtillity Roller Parts:
25b 3/8" - 16 x 1-1/4" Spinlock Bolt ...................................................................... 9904.2203 225c 3/8" - 16 x 1-1/2" Spinlock Bolt ...................................................................... 9904.2204 227 3/8" - 16 Spinlock Nut ................................................................................... 9904.6200 470a Assembly "C2" Mounting Block (Left) ............................................................ 9940.0071 270b Assembly "C2" Mounting Block (Right) .......................................................... 9940.0072 2– Assembly "C" Mounting Block (Universal)....................................Not Shown 9940.0076** 4
70c Trunion Bearing Short - 1-1/2" ....................................................................... 9940.0007 470d Trunion Bearing Long - 1-1/2" ........................................................................ 9940.0016 481a 1/2" x 1-3/4" SST Roller Rod ......................................................................... 9940.0015 481b 1/2" x (Specify Roller Length) SST Roller Rod .............................................. 9940.0009 291 1-1/2" O.D. x (Specify Roller Length) SST Roller Tubing ............................. 9940.0003 4
Complete Utility Roller Assemblies:
Assembly "A2" Rollers -- Complete........................................Specify Length 9939.1060Assembly "B2" Rollers -- Complete........................................Specify Length 9939.1061Assembly "C2" Rollers -- Complete .......................................Specify Length 9939.1062
Assembly "A" Rollers -- Complete .........................................Specify Length 9939.0060Assembly "B" Rollers -- Complete .........................................Specify Length 9939.0061Assembly "C" Rollers -- Complete .........................................Specify Length 9939.0062
Roller Mounting Bracket Parts -- (Pressed Frame & Roll Form Frame):
25a 3/8" - 16 x 1" Spinlock Bolt............................................................................. 9904.2202 427 3/8" - 16 Spinlock Nut .................................................................................... 9904.6200 470e Top Wind Welded Cross Brace ...............................................Specify Model 9941.0046 170f Top Wind Vertical Upright -- (with provision for crank) ............Specify Model 9941.0037 170g Top Wind Vertical Upright -- (No provision for crank)..............Specify Model 9941.0036 1
– Top Wind Mounting Bracket - Assy B & B2 -- Complete .........Specify Model 9941.0041– Top Wind Mounting Bracket - Assy C & C2 -- Complete.........Specify Model 9941.0040
Roller Mounting Bracket Parts -- (Trapezoidal Frame):
70h Top Wind Cross Member Brace ..............................................Specify Model 9941.0034 170j Top Wind Mounting Brackets (Pair).........................................Specify Model 9941.0033 1
– Top Wind Mounting Bracket - Assy C & C2 -- Complete.........Specify Model 9941.0035 1
BE SURE TO SPECIFY COMPLETE MODEL NUMBER and SERIAL NUMBER OF REEL.USE PART NUMBER!
When ordering parts
3M HP 3-10 H-8511-PRev. 11
** Note: If Assembly "A", "B", or "C" is chosen instead of Assembly "A2", "B2", or "C2", the mounting block partnumber changes to 9940.0076
Hannay Reels, Inc., 553 State Route 143Westerlo, NY 12193Telephone 518-797-3791; Toll Free 1-877-GO REELS (467-3357)FAX 1-800-REELING (733-5464)INT’L FAX (518) 797-3259Website: www.hannay.comE-mail: [email protected]
ISO 115PARTS LIST
UTILITY HOSE ROLLERSAssembly Styles A/B/C & A2/B2/C2
3M HP 3-10 Form H-8511-PRev. 11
Hannay ISO Parts Lists are availableat www.hannay.com
ROLLER MOUNTING BRACKET(PRESSED FRAME & ROLL FORM FRAME)
ROLLER MOUNTING BRACKET(TRAPEZOIDAL FRAME)
ASSEMBLY “A” OR “A2”
ASSEMBLY “B” OR “B2”
ASSEMBLY “C” OR “C2”
SURREY 1.855.258.3835 • CALGARY 1.866-629.7847 EDMONTON 1.800.661.7770 • SASKATOON 1.800.667.5886
200
HO
SE REELS HO
SE R
EELS
Static Grounding Reels
HGR/GRSTATIC GROUNDING REELS
H0606-SG2M • HP • 08-06
.
• Available with 1/8", 7x19 galvanized carbon steel cable• 100 amp Alligator Clamp.• Stainless steel or plastic-covered cable and "Y" branches
are available at an additional charge. • Cable guide arm of cast aluminum and 2A+12 Alum
Zinc Alloy.
Series GR75• Sealed spring is a good economical choice compact and
lightweight.Series HGR• A non-sparking ratchet assembly.• Reels are repairable and parts are readily available.
Y
D
E
H
G
B
C
X
A
F
C
F
E
G
H
D
Y
B
X
A
Model GR75/MGR75GR75 Shown
Models HGR50/HGR100/MHGR50HGR Shown
553 State Route 143Westerlo, NY 12193-0159Telephone 518-797-3791Toll Free 1-877-GO REELS (467-3357)FAX 1-800-REELING (733-5464) USAFAX 1-518-797-3259 (International)Website: www.hannay.com E-mail: [email protected]
To Order (Specify all items listed):• Gauge, length, O.D., and coating if required• Specify “Y” branch if required• Finish if other than standard• Complete model numberReels can be shipped as a parcel package (via FedEx or UPS ground).
Model Cable Capacity of Reel Approx. Weight Reel DimensionsNumber feet lb. inches
m. kg mmWithout With A B C D E F G H X Y
cable cableGR 75 75 11 14 2 2 7 9 9.25 3.5 9.88 5.06 1 7.88
23 5 6 51 51 178 229 235 89 251 129 25 200MGR 75 100 11 13 2 2 7 9 9.25 5.25 9.88 5.06 1 7.88
30 5 6 51 51 178 229 235 133 251 129 25 200HGR 50 75 28 30 4 1.25 10.75 11.5 14.25 5.5 16.75 8.88 2.38 7.5
23 13 14 102 32 273 292 362 159 425 226 60 191MHGR 50 200 18 20 4 1.25 10.75 11.5 14.25 6.25 16.75 8.88 2.38 7.5
61 8 9 102 32 273 292 362 159 425 226 60 191HGR 100 100 37 40 4 1.25 13.25 11.5 16.75 5.5 17.75 8.88 2.38 7.5
30 17 18 102 32 337 292 425 140 451 226 60 191
Parts Drawing: HGR Series – ISO 10
• These reels bond and/or ground aircraft, fuel trucks and other equipment.• Provide smooth operation and require minimum cable pull.• Declutching arbor and adjustable guide arm with cable guide.• Optional stainless steel construction of spool, frame & ratchet system available on HGR series.• Standard finish is oven-cured enamel.• Also available, manual rewind version.
Model HGR 50 Model SS HGR 50Model HGR 100 Model MHGR 50 Model GR 75 Model MGR 75
Hannay Reels
HGR/GRSTATIC GROUNDING REELS
H0606-SG2M • HP • 08-06
.
• Available with 1/8", 7x19 galvanized carbon steel cable• 100 amp Alligator Clamp.• Stainless steel or plastic-covered cable and "Y" branches
are available at an additional charge. • Cable guide arm of cast aluminum and 2A+12 Alum
Zinc Alloy.
Series GR75• Sealed spring is a good economical choice compact and
lightweight.Series HGR• A non-sparking ratchet assembly.• Reels are repairable and parts are readily available.
Y
D
E
H
G
B
C
X
A
F
C
F
E
G
H
D
Y
B
X
A
Model GR75/MGR75GR75 Shown
Models HGR50/HGR100/MHGR50HGR Shown
553 State Route 143Westerlo, NY 12193-0159Telephone 518-797-3791Toll Free 1-877-GO REELS (467-3357)FAX 1-800-REELING (733-5464) USAFAX 1-518-797-3259 (International)Website: www.hannay.com E-mail: [email protected]
To Order (Specify all items listed):• Gauge, length, O.D., and coating if required• Specify “Y” branch if required• Finish if other than standard• Complete model numberReels can be shipped as a parcel package (via FedEx or UPS ground).
Model Cable Capacity of Reel Approx. Weight Reel DimensionsNumber feet lb. inches
m. kg mmWithout With A B C D E F G H X Y
cable cableGR 75 75 11 14 2 2 7 9 9.25 3.5 9.88 5.06 1 7.88
23 5 6 51 51 178 229 235 89 251 129 25 200MGR 75 100 11 13 2 2 7 9 9.25 5.25 9.88 5.06 1 7.88
30 5 6 51 51 178 229 235 133 251 129 25 200HGR 50 75 28 30 4 1.25 10.75 11.5 14.25 5.5 16.75 8.88 2.38 7.5
23 13 14 102 32 273 292 362 159 425 226 60 191MHGR 50 200 18 20 4 1.25 10.75 11.5 14.25 6.25 16.75 8.88 2.38 7.5
61 8 9 102 32 273 292 362 159 425 226 60 191HGR 100 100 37 40 4 1.25 13.25 11.5 16.75 5.5 17.75 8.88 2.38 7.5
30 17 18 102 32 337 292 425 140 451 226 60 191
Parts Drawing: HGR Series – ISO 10
WWW.MAXQUIP.CA • WINNIPEG 1.844.278.5771 TORONTO 1.800.801.8512 • MONTREAL 1.877.629.7847
201
HO
SE REELS HO
SE R
EELS
HGR Static Grounding Reels Parts Breakdown - DiagramHannay Reels
TELEMETRY & CO
NTROL TE
LEM
ETRY
& C
ONT
ROL
SURREY 1.855.258.3835 • CALGARY 1.866-629.7847 EDMONTON 1.800.661.7770 • SASKATOON 1.800.667.5886
202
HO
SE REELS
HGR Static Grounding Reels Parts BreakdownHannay ReelsWhen ordering parts, please be sure to specify COMPLETE MODEL NUMBER AND SERIAL NUMBER OF REEL.