How to work Cable Network
OUT LINE
Know the color of wire in cable
Know the tool for work
Order color in RJ
Test the cable
8-wire standard
Tools Cutter
ToolsRJ
ToolsCable Network
ToolsTester
ToolsPiston networks
HOW TO WIRE THE NETWORK
Using a wire cutter undress
COLOR OF WIRE IN CABLE
Each cable consisting of 8 wires
Colors
Green and green – white
Blue and blue - white
Orange and orange - white
Brown and Brown - White
8-WIRE STANDARD
Order color
Order of colors depending on the basic standards
Order of colors inside the RJ
HOW TO WIRE THE NETWORK
Order of colors inside the RJ
ORDER COLOR IN RJ
Order of colors inside the RJ
ORDER COLOR IN RJ
After that is put the RJin the piston network
Put RJ in piston
Enter the cable in tester device
Test the cable
1-32-63-14-45-56-27-78-8
If the cable is ready for use must work all the headlamp according to the following
THE END
Thank you for listening
by: Isra’a Al Jarrah2008901081Computer ScienceA. Mohammad Ramahi