HPXHydraulics
2
Stäubli HPX non-spill range specially designed for high pressure pulsating or vibrating hydraulic lines.
Non-spill, flush face design With non-spill flush faces, the HPX connector prevents the introduction of air into the circuits and any contamination of the working area.
Easy connection The pre-guiding system of the plug into the socket eases the connection of hydraulic hoses.
Safe claw locking mechanism Prevents accidental disconnection due to mechanical or vibration forces.
Protective seals • A sealing barrier protects the main seal
from dirt.
• Socket and plug are supplied with dust caps.
• The retractable locking sleeve (HPX 08 to HPX 25) and the flush face design facilitate effective cleaning before coupling.
Minimum pressure drop The circuit is designed for direct flow without breaking the stream and without any turbulence.
Robust, quick screw locking mechanism HPX connection is made using the robust thread, with a quick start trapezoidal thread.
The opportunity to spend less and contribute to a sustainable development programmeReduce operating costs by contributing to a sustainable development programme. With Stäubli, you can rely on the performance of your equipment, reliability of long-term investments, no workplace pollution.
Connectors especially recommended for:
n Steel industry: rolling mills.n Road making and building equipment: hydraulic driven machinery, quick tool change, tunnel boring machine.n Aeronautics: test benches, endurance testing, launch pads and launch platforms.n Defence n Automotive: aluminium die casting, foundry tools.n Mechanical construction: cutting, punching, tube bending, deformation, forming and hydroforming.
3
4 types of seals • Nitrile, Fluorocarbon, Polyurethane for
mineral or synthetic oil hydraulic circuits.
• Ethylene-Propylene for glycol water and Skydrol ® circuits.
Convenient locking system • Locking sleeve with both threaded (M 8)
and plain holes for tommy bar for ease of tightening.
• For large diameters, HPX 20 to HPX 33 may be ordered with integrated handwheel.
Protective dust caps To protect the socket and plug in disconnection position.
2 materials available:• From HPX 08 to HPX 25: Chloroprene • From HPX 08 to HPX 33: anodised light
alloy
The light alloy caps for HPX 08 to HPX 25 come in 4 colours: • Colourless • Red • Yellow • Blue for prompt visual identification of the circuits.HPX 33: Anodised light alloy in red.
ConstructionMainly stainless steel with high mechanical strength.
4
Technical characteristics
* Use of this seal with water-based fluids is not allowed.** Use or any contact of this seal with other fluids especially mineral oils
(oil, grease, etc) is not allowed.
With light alloy caps • Mineral or synthetic hydraulic oils - Nitrile (NBR) seal - 15 °C to + 100 °C - Fluorocarbon (FPM) seal - 10 °C to + 150 °C - Polyurethane (PU)* seal - 10 °C to + 80 °C
• Glycol water, Skydrol ® - Ethylene-Propylene (EPDM)** seal - 25 °C to + 150 °C
With Chloroprene (CR) caps- 20 °C to + 100 °C
Working temperature
Protective dust caps • From HPX 08 to HPX 25:
- Chloroprene (CR) caps as standard - Light alloy caps optional.
• HPX 33: light alloy caps.
Leak tightness • Standard - Nitrile (NBR) seals.
• Optional- Fluorocarbon (FPM) seals - Polyurethane (PU)* seals - Ethylene-Propylene (EPDM)**
seals
HPX 08 HPX 12 HPX 16 HPX 20 HPX 25 HPX 33
Max. working pressure (bar) 500 500 500 500 500 350
Flow path (mm) 8 12 16 20 25 33
Shut-off double
5
Zone A: all seals
Zone B: Nitrile, Fluorocarbon and Polyurethane seals temperature ≤ 60 °C
Zone C: Polyurethane seals temperature ≤ 60 °Cno water-based fluid.
Test conditions: - fluid : water at 20° C- direction of flow: socket plug
Flow rate/pressure drop charts
5
Speed (m/s) Flow rate (l/min)
HPX 08 HPX 12 HPX 16 HPX 20 HPX 25 HPX 33
5 15 34 60 94 147 256.5
10 30 68 120 188.5 294.5 513
15 45 102 180 283 442 770
Hydraulic flow rate (l/min)
HPX 20
HPX 25
Hydraulic flow rate (l/min)
Pressure drop (bar)
Hydraulic flow rate (l/min)
HPX 33
Hydraulic flow rate (l/min)
HPX 12
Hydraulic flow rate (l/min)
Pressure drop (bar)HPX 08
Hydraulic flow rate (l/min)
Pressure drop (bar)HPX 16
Pressure drop (bar)
Pressure drop (bar)
Pressure drop (bar)
Part-numbersSockets
Coloured metal plug
Option available for HPX 08 to HPX 25: add the colour code to the socket and plug part-numbers. BM = ”colourless” anodised cap BMJ = yellow anodised capBMR = red anodised cap BMB = blue anodised capE.g.: HPX 08.1103/BMB: connector with blue coloured cap
Sockets and plugs HPX 33 are fitted as a standard with an anodised metal cap in red.
Leak tightness
Optional Fluorocarbon, Polyurethane or Ethylene-Propylene seals are available on all the models. Add the corresponding code to the socket and plug part-numbers:
JV = Fluorocarbon (FPM) seal JPV = Polyurethane (PU) seal 41B8 = Ethylene-Propylene (EPDM) seal
E.g.: HPX 08.1103/JV
Length of connected socket and plug: add L1 of the socket to L of the corresponding plug. (a): leak tightness profile according to standard SAE J 1926-1.
6
Designation ModelConnection C
or pipe outside ØDimensions (mm)
Part-numbersØ D L L1 L2 H/flats Ø Ø d
1. Socket female threadHPX 08
G 1/2 50 75 45.5 32 HPX 08.1103
NPT 1/2 50 75 45.5 32 HPX 08.1203
UN 3/4 - 16 (a) 50 75 45.5 32 HPX 08.1319
HPX 12
G 3/4 59.5 93.5 58.5 46 HPX 12.1104
NPT 3/4 59.5 93.5 58.5 46 HPX 12.1204
UN 1 1/16 - 12 (a) 59.5 99 64 46 HPX 12.1327
HPX 16
G 1 68.5 108.5 67.8 50 HPX 16.1105
NPT 1 68.5 108.5 67.8 50 HPX 16.1205
UN 1 1/16 - 12 (a) 68.5 108.5 67.8 50 HPX 16.1333
HPX 20
G 1 73 110 69.5 50 HPX 20.1105
NPT 1 73 110 69.5 50 HPX 20.1205
UN 1 5/16 - 12 (a) 73 110 69.5 50 HPX 20.1333
HPX 25
G 1 1/4 91 140.5 88 65 HPX 25.1106
NPT 1 1/4 91 140.5 88 65 HPX 25.1206
UN 1 5/8 - 12 (a) 91 140.5 88 65 HPX 25.1341
HPX 33G 1 1/2 109 153 94.5 80 HPX 33.1107
UN 1 7/8 - 12 (a) 109 153 94.5 80 HPX 33.1347
2. Panel mount socket female thread HPX 08
G 1/2 50 71 41 22 36 31 44 HPX 08.2103
NPT 1/2 50 71 41 22 36 31 44 HPX 08.2203
UN 3/4 - 16 (a) 50 71 41 22 36 31 44 HPX 08.2319
HPX 12
G 3/4 59.5 90.5 55.5 22 46 41 55.5 HPX 12.2104
NPT 3/4 59.5 90.5 55.5 22 46 41 55.5 HPX 12.2204
UN 1 1/16 - 12 (a) 59.5 90.5 55.5 22 46 41 55.5 HPX 12.327
HPX 16
G 1 68.5 100.5 59.8 24 56 51 68 HPX 16.2105
NPT 1 68.5 100.5 59.8 24 56 51 68 HPX 16.2205
UN 1 1/16 - 12 (a) 68.5 100.5 59.8 24 56 51 68 HPX 16.2333
HPX 20
G 1 73 102 61.5 24 56 51 68 HPX 20.2105
NPT 1 73 102 61.5 24 56 51 68 HPX 20.2205
UN 1 5/16 - 12 (a) 73 102 61.5 24 56 51 68 HPX 20.2333
HPX 25
G 1 1/4 91 131 78.5 26.5 65 61 81 HPX 25.2106
NPT 1 1/4 91 131 78.5 26.5 65 61 81 HPX 25.2206
UN 1 5/8 - 12 (a) 91 131 78.5 26.5 65 61 81 HPX 25.2341
3. Socket male thread for hydraulic pipes with 24° taper according to ISO 8434-1 series S HPX 08
M 20 x 1,5 for pipes with tubes outside Ø 12 mm
50 74 44.5 12 32 HPX 08.1612
M 24 x 1,5 for pipes with tubes outside Ø 16 mm
50 74 44.5 14 32 HPX 08.1616
HPX 12
M 24 x 1,5 for pipes with tubes outside Ø 16 mm
59.5 93.5 58.5 14 46 HPX 12.1616
M 30 x 2 for pipes with tubes outside Ø 20 mm
59.5 93.5 58.5 16 46 HPX 12.1620
HPX 16M 36 x 2 for
pipes with tubes outside Ø 25 mm
68.5 105.5 64.8 18 50 HPX 16.1625
HPX 20M 42 x 2 for
pipes with tubes outside Ø 30 mm
73 108 67.5 20 50 HPX 20.1630
HPX 25M 55 x 2 for
pipes with tubes outside Ø 38 mm
91 130.5 78 22 65 HPX 25.1638
HPX 08HPX 12HPX 16HPX 20HPX 25
HPX 33
7
Plugs
7
HPX 20 to HPX 33 plugs with handwheel
Add VT code to part-numbers of HPX 20 to HPX 33 plugs mentioned above. E.g.: HPX 20.7105/VT
HPX 25.7106/VT HPX 33.7107/VT
Recommendations
- Allow the locking sleeve to float.- Install a pressure compensator if needed.
Connection without residual pressure.
(a): leak tightness profile according to standard SAE J 1926-1.
Designation ModelConnection C
or pipe outside ØDimensions (mm)
Part-numbersØ D L L1 H/flats Ø Ø d
4. Plug female threadHPX 08
G 1/2 47 95 30 HPX 08.7103
NPT 1/2 47 95 30 HPX 08.7203
UN 3/4 - 16 (a) 47 89 30 HPX 08.7319
HPX 12
G 3/4 57 107 38 HPX 12.7104
NPT 3/4 57 107 38 HPX 12.7204
UN 1 1/16 - 12 (a) 57 110 38 HPX 12.7327
HPX 16
G 1 65.5 120.5 46 HPX 16.7105
NPT 1 65.5 120.5 46 HPX 16.7205
UN 1 1/16 - 12 (a) 65.5 118 46 HPX 16.7333
HPX 20
G 1 70 124 46 HPX 20.7105
NPT 1 70 124 46 HPX 20.7205
UN 1 5/16 - 12 (a) 70 122 46 HPX 20.7333
HPX 25
G 1 1/4 88 139.5 58 HPX 25.7106
NPT 1 1/4 88 137.5 58 HPX 25.7206
UN 1 5/8 - 12 (a) 88 137.5 58 HPX 25.7341
HPX 33G 1 1/2 103 157 70 HPX 33.7107
UN 1 7/8 - 12 (a) 103 157 70 HPX 33.7347
5. Panel mount plug female thread
C
HPX 08
G 1/2 47 85 22 35 31 44 HPX 08.5103
NPT 1/2 47 85 22 35 31 44 HPX 08.5203
UN 3/4 - 16 (a) 47 85 22 35 31 44 HPX 08.5319
HPX 12
G 3/4 57 96 22 46 41 56 HPX 12.5104
NPT 3/4 57 96 22 46 41 56 HPX 12.5204
UN 1 1/16 - 12 (a) 57 96 22 46 41 56 HPX 12.5327
HPX 16
G 1 65.5 103.5 24 56 51 68 HPX 16.5105
NPT 1 65.5 103.5 24 56 51 68 HPX 16.5205
UN 1 1/16 - 12 (a) 65.5 103.5 24 56 51 68 HPX 16.5333
HPX 20
G 1 70 107 24 56 51 68 HPX 20.5105
NPT 1 70 107 24 56 51 68 HPX 20.5205
UN 1 5/16 - 12 (a) 70 107 24 56 51 68 HPX 20.5333
HPX 25
G 1 1/4 88 131.5 26.5 65 61 81 HPX 25.5106
NPT 1 1/4 88 131.5 26.5 65 61 81 HPX 25.5206
UN 1 5/8 - 12 (a) 88 131.5 26.5 65 61 81 HPX 25.5341
6. Plug male thread for hydraulic pipes with 24° taper according to ISO 8434-1 series S HPX 08
M 20 x 1,5 for pipes with tubes outside Ø 12 mm
47 88 12 30 HPX 08.7612
M 24 x 1,5 for pipes with tubes outside Ø 16 mm
47 88 14 30 HPX 08.7616
HPX 12
M 24 x 1,5 for pipes with tubes outside Ø 16 mm
57 99 14 38 HPX 12.7616
M 30 x 2 for pipes with tubes outside Ø 20 mm
57 99 16 38 HPX 12.7620
HPX 16M 36 x 2 for
pipes with tubes outside Ø 25 mm
65.5 107.5 18 46 HPX 16.7625
HPX 20M 42 x 2 for
pipes with tubes outside Ø 30 mm
70 109 20 46 HPX 20.7630
HPX 25M 55 x 2 for
pipes with tubes outside Ø 38 mm
88 133.5 22 58 HPX 25.7638
HPX 08HPX 12HPX 16HPX 20HPX 25
HPX 33
www.staubli.com
RF1
5003
02B
Belgium, LuxembourgTel.: +32 56 36 40 03 [email protected]
Brazil Tel.: +55 11 2348 7400 [email protected]
China Tel.: +86 40066 70066 [email protected]
Czech Republic, Slovakia, Hungary Tel.: +420 466 616 125 [email protected]
France Tel.: +33 1 69 93 25 00 [email protected]
Germany, Austria, Denmark Tel.: +49 921 883 0 [email protected]
Hong Kong Tel.: +852 2366 0660 [email protected]
IndiaTel.: +91 22 2823 93 43 / 45 [email protected]
ItalyTel.: +39 0362 944.1 [email protected]
Japan Tel.: +81 6 6889 3308 [email protected]
North America(USA, Canada, Mexico) Tel.: +1 864 433 1980 [email protected]
Poland Tel.: +48 42 636 85 04 [email protected]
Portugal Tel.: +351 22 978 39 56/50 [email protected]
Romania, Bulgaria Tel.: +40 374 040 494 [email protected]
Russia Tel.: + 7 812 3344630 [email protected]
Singapore Tel.: +65 6266 0900 [email protected]
Slovenia, Croatia Tel.: +386 8 205 01 05 [email protected]
South Korea Tel.: +82 53 753 0044 [email protected]
Spain Tel.: +34 93 720 54 05 [email protected]
Switzerland Tel.: +41 43 244 22 33 [email protected]
Taiwan Tel.: +886 2 8797 7795 [email protected]
Turkey Tel.: +90 212 472 13 00 [email protected]
United Kingdom Tel.: +44 1952 671918 [email protected]
International sales coordinationStäubli Faverges - CS 30070 - F - 74210 FavergesTel.: +33 4 50 65 67 97 - Fax: +33 4 50 65 60 69e mail: [email protected]
Staubli is a trademark of Stäubli International AG, registered in Switzerland and other countries. © Staubli. 09/03/2015We reserve the right to modify product specifications without prior notice.
Stäubli units Connectors distributors