Unico
IN-FURROW PARALLELOGRAM PLOUGHAdjustments have never been so quick!
STRonG, AccURATE, SMART... Unico!UNICO is featured with a special parallelogram linkage system designed to quick up settings and improve accuracy of tillage on field. This plough has an innovative design, a sturdyframe and many technical solutions to make easier the daily job. UNICO is available from 2 to5+1 bodies, with bolt or hydro-pneumatic safety systems and mechanical or hydraulicworking width adjustment.
THE “SMooTH SET” PARALLELoGRAM:in LinE WiTH YoUR nEEDS!The double arm of parallelogram keeps constant the operator settings for first furrow and the pull line alignment, even after working width adjustments.The first furrow working width can be easily adjusted byan hydraulic ram (optional feature). These features make extremely fast the plough setup on field and allow to get always a regular and even soil tillage.
2
in-FURRoW MoUnTED PLoUGH
Even adjustment of first furrow working width. No correction needed on pull line alignment setup.
3
PLoUGHinG HAS nEVER BEEn So EASY !The “SMOOTH SET” parallelogram allows to adjust easier the first furrow and the pull line according to soil, residue conditions or working depth. Pin systems (skimmers and depthwheel) and quick release elements (mouldboard and headstock) reduce dramatically thetime for setup.
FRoM A SoiL To THE oTHER cHAnGinG THE MoULDBoARDThe quick mouldboard replacement is, for sure, one of the bigger innovations for this plough; shifting it allows to skip from one soil texture to the other! It’s not anymore needed to remove all the “share-knife-mouldboard” group from the leg: the mouldboard can be replaced simply loosening a few bolts!
RESiDUES ARE noT A PRoBLEM !A quick “cotter and pin” system allows an easy setup of skimmer working depth, to well define the height of topsoil burying. In this way is possible to plough in the same day different fields with much variable residue conditions.
4
in-FURRoW MoUnTED PLoUGH
“SoLo WHEEL”onE WHEEL, TWo FUncTionS The depth wheel is available also in transport “combi” version: the road transfer will be easier and safer! The plough is pulled in half-reversed position standing on the wheel: in this way the larger part of its weight will be released to soil. This configuration reduces rolling and pitching on the road for a much more comfortable and safe drive. Versions larger than 4 bodies are featured by a hydro-pneumatic dampened wheel.
inTERcHAnGABLE HEADSTocK The headstock has designed to offer the best reliability
and stability. The third point and the rotation hinge are enclosed in a structure connected to the
plough body, while the two lifting connections are boltedon it. This exclusive configuration allows to shift quickly
(6 bolts totally) from rigid to steering headstock, or evento connect a quick-hitch bar. For a perfect matching to any
tractor, two possible hitch heights are available.
Steering headstock
5
Unico: onE MAcHinE, MAnY conFiGURATionS
MODEL SIZE HP FRAME (in.)
UNDERFRAME CLEARANCE
(in.)
WORKING WIDTH PER
FURROW (in.)
NUMBER OF BODIES ON INTERBODY CLEARANCE
33 in. 37 in. 41 in. 45 in.
UNICO
S 50-150 4 x 4 30 10-12-14-16 2 - 4+1 2 - 4+1 - -
M 70-180 5 x 5 31 ½ 12-14-16-18 2 - 4+1 2 - 4+1 2 - 4+1 -
L 90-250 5 ½ x 5 ½ 35 ½ 14-16-18-20 - - 2 - 4+1 2 - 4+1
UNICO VARIO
S 50-160 4 x 4 30 9-18 2 - 4+1 2 - 4+1 - -
M 70-190 5 x 5 31 ½ 9-22 2 - 4+1 2 - 4+1 2 - 4+1 -
L 90-280 5 ½ x 5 ½ 35 ½ 9-22 - - 2 - 4+1 2 - 4+1
UNICO NON STOP
S 70-180 4 x 4 30 10-12-14-16 2 - 4+1 2 - 4+1 - -
M 80-190 5 x 5 31 ½ 12-14-16-18 2 - 4+1 2 - 4+1 2 - 3+1 -
L 100-280 5 ½ x 5 ½ 35 ½ 14-16-18-20 - - 2 - 4+1 2 - 4+1
UNICO NON STOP VARIO
S 70-180 4 x 4 30 9-18 2 - 4+1 2 - 4+1 - -
M 80-200 5 x 5 31 ½ 9-22 2 - 4+1 2 - 4+1 2 - 3+1 -
L 100-280 5 ½ x 5 ½ 35 ½ 9-22 - - 2 - 4+1 2 - 4+1
6
in-FURRoW MoUnTED PLoUGH
Unico is available in 3 sizes to satisfy all the customer needs. “S” series allows to configure a light machine ideal for matching to low power tractor and shallow tillage, while “L” offers all the benefits of the highest sturdiness. The size (ø) of revolution hinge is proportional to the section of frame square beam.
THE RiGHT SiZE FoR ALL THE nEEDS
“PASSO” mechanical pin system for furrow working width adjustment
“VARIO” hydraulic system for furrow working width adjustment
Shearing pin 10,9 Nm safety device
Hydro-pneumatic NON-STOP safety device
Frame, detail of the flange for additional furrow
MODELLO SQUARE BEAM
SQUARE BEAM THICKNESS
HINGE ø LEG SECTION
“S” SERIES 4 x 4 in. ½ x ½ in. 3 ½ in. 3 x 1 in.
“M” SERIES 5 x 5 in. ½ x ½ in. 4 in. 3 x 1 ½ in.
“L” SERIES 5 ½ x 5 ½ in. ½ x ½ in. 5 in. 3 x 1 ½ in.
7
MP 4 WSHelical mouldboard
For a working depth from 6 to 12 in. Can be used with a working width from 12 to 24 in. Suggested for winter ploughings and wet soils.
MP 4 WNSemi-helical mouldboard
For a working depth from 8 to 15 in. Can be used with a working width from 12 to 22 in. Suggested for heavy and wet soils.
MP 4 NSlattered semi-helical mouldboard
For a working depth from 8 to 15 in. Can be used with a working width from 12 to 22 in. Suggested for medium-clay soils.
11-1
4 C
od. W
0022
6600
R -
Mas
chio
Gas
pard
o M
arke
ting
Dep
artm
ent
For g
raph
ic re
ason
s, s
ome
pict
ures
and
imag
es d
o no
t sho
w th
e “E
C” s
afet
y gu
ards
.
Tec
hnic
al d
atas
and
mod
els
show
n in
this
cat
alog
ue a
re n
ot b
indi
ng. W
e re
serv
e th
e rig
ht to
revi
se th
e co
nten
ts o
f thi
s ca
talo
gue,
to a
men
d or
impr
ove
the
spec
ifica
tions
with
out n
otic
e.
the winning team
Production PlantVia Mussons, 733075 Morsano al Tagliamento (PN) - ItalyTel. +39 0434 695410Fax +39 0434 695425
MASCHIO GASPARDO S.p.A.Headquarters and Production PlantVia Marcello, 7335011 Campodarsego (PD) - ItalyTel. +39 049 9289810Fax +39 049 9289900e-mail: [email protected]://www.maschionet.com
MASCHIO-GASPARDO North America, Inc.Headquarters and Production Plant112 3rd Ave EastDeWitt, IA 52742 - USAPhone: +1 (563) 659-6400Fax: +1 (563) 659-6404e-mail: [email protected]://www.maschio.us